According to SMs letters the kick happen Dearing the rectification process. Bare copper wires do NOT recertify anything. Copper coated with oxide yes. You can do this with chemicals.
This experiment is based on research pertaining to the Steven Mark TPU. It is not exactly how the real one works but was one of my early tests with the device. Ii you want you learn more about it, check out overunity (dot) com and look at the Steven Mark Section to read more about it.
I worked with Steven Mark. The magnet was a ruse. It closed a reed switch in the primary. Steven thought it would throw off analysis of snooping eyes during demos. He was the most paranoid person I ever met. By the way, if you want a little hint as to the device's basic make up and why it acted like a gyro in its resistance to motion pull Tesla's patent 381,970 circa 1888. Study the quadrature nature of the coils and disregard the rest. From there ask yourself why the specific resonant freq.
Really?! That's amazing. Any bozo can come here and make such a claim. Without fully disclosing Steven's phone number or email what were the first two digits of the phone number after the area code? Or...what are the initials of the name he uses in emails?
jdo, Can you, at this point, explain why Mark uses no external wires or power supply, why he simply inserted a few magnets to make it power-up? Pleae don't waste too much time with anything else, it's pissing in the wind.
Steven Mark's TPU doesn't require an external function generator or power supply because it has a small "control unit" built into it. This unit is responsible or regulating the input frequencies. To better understand what the coil is actually doing, look up Stefan Marinov's MAGVID. It works on the similar funimental principles though he wasn't using it to collect energy from the environment.
Steven Mark inserts two tiny magnets into 2 tiny coils to power-up his device, and I am wondering if capacitors or tiny Batteries woud then begin to oscillate the same tiny magnets, self powering the device, causing A/C in outer coils. He claims 6000 hertz A/C 90volts, good amps.
Here's the concept, add generator coil and downsizing: /watch?v=YMCk8zBE-4U
I did a little research on Steven Marks TPU. I read that he used the Earth's natural frequency to power the units. I believe that he also used three different frequencies by tuning 3 different circuits and combining the frequencies with little "kicks" into one big kick which would provide necessary pressure or voltage. The amount of energy usage would depend on the size of the TPU and the Load demands.
it's obviously vital that it be selfrunning. as it is I'd bet you the fucking signal generator is powering the diode. pardon my french. but keep at it
Thanks guys for the responses. I may have more video soon in the coming weeks. At the moment, I'm building a custom control board to drive the frequency input.
ok i just read the new popular science magazine they are sending power through air with 5 or 10 mhz a new company is doing this now it is in the new magazine popsciecnce or pop mechanics
google 'current transformer'
fgleich 1 year ago
According to SMs letters the kick happen Dearing the rectification process. Bare copper wires do NOT recertify anything. Copper coated with oxide yes. You can do this with chemicals.
kfstevens2370 2 years ago
Interesting point there. Have you done any experiments along these lines?
Jdo300 2 years ago
Yes I have but with the William N. Barbat patent. The black oxide is formed on the copper wires by using lye crystals or drain cleaner.
kfstevens2370 2 years ago
Comment removed
NoctumDeVir 2 years ago
Hello
You have a plans for the system, I would like to prove this experiment
geddylee2009 3 years ago
This experiment is based on research pertaining to the Steven Mark TPU. It is not exactly how the real one works but was one of my early tests with the device. Ii you want you learn more about it, check out overunity (dot) com and look at the Steven Mark Section to read more about it.
Jdo300 3 years ago
Free power for the oscillator:
watch?v=pRPE6OG7Mp0
sirmikeydotcom 3 years ago
I worked with Steven Mark. The magnet was a ruse. It closed a reed switch in the primary. Steven thought it would throw off analysis of snooping eyes during demos. He was the most paranoid person I ever met. By the way, if you want a little hint as to the device's basic make up and why it acted like a gyro in its resistance to motion pull Tesla's patent 381,970 circa 1888. Study the quadrature nature of the coils and disregard the rest. From there ask yourself why the specific resonant freq.
JackDurban 4 years ago
thanks
dreckka 3 years ago
I spoke to Steven Mark yesterday and he told me that he never knew or ever encounter with a person like you.
lotiprata 3 years ago
Really?! That's amazing. Any bozo can come here and make such a claim. Without fully disclosing Steven's phone number or email what were the first two digits of the phone number after the area code? Or...what are the initials of the name he uses in emails?
This should be fun.
JackDurban 3 years ago
why mr. S.M. don`t want to share this technology?
Kingostewar 2 years ago 2
jdo, Can you, at this point, explain why Mark uses no external wires or power supply, why he simply inserted a few magnets to make it power-up? Pleae don't waste too much time with anything else, it's pissing in the wind.
Cal
calfellows 4 years ago
Steven Mark's TPU doesn't require an external function generator or power supply because it has a small "control unit" built into it. This unit is responsible or regulating the input frequencies. To better understand what the coil is actually doing, look up Stefan Marinov's MAGVID. It works on the similar funimental principles though he wasn't using it to collect energy from the environment.
Jdo300 4 years ago
Steven Mark inserts two tiny magnets into 2 tiny coils to power-up his device, and I am wondering if capacitors or tiny Batteries woud then begin to oscillate the same tiny magnets, self powering the device, causing A/C in outer coils. He claims 6000 hertz A/C 90volts, good amps.
Here's the concept, add generator coil and downsizing: /watch?v=YMCk8zBE-4U
sirmikeydotcom 3 years ago
I did a little research on Steven Marks TPU. I read that he used the Earth's natural frequency to power the units. I believe that he also used three different frequencies by tuning 3 different circuits and combining the frequencies with little "kicks" into one big kick which would provide necessary pressure or voltage. The amount of energy usage would depend on the size of the TPU and the Load demands.
bcoulal 3 years ago
The Linden Experiment uses a compass instead of sound waves to generate the current. Compass also needs no power source.
Instructions:
rimstar dot org/sdenergy/testa/lindenexp.htm
Compass Illustration:
linux-host dot org/energy/eswiss.html
sirmikey01 4 years ago
an AMV will perhaps do.
it's obviously vital that it be selfrunning. as it is I'd bet you the fucking signal generator is powering the diode. pardon my french. but keep at it
DanFrederiksen 4 years ago
Thanks guys for the responses. I may have more video soon in the coming weeks. At the moment, I'm building a custom control board to drive the frequency input.
Jdo300 4 years ago
ok i just read the new popular science magazine they are sending power through air with 5 or 10 mhz a new company is doing this now it is in the new magazine popsciecnce or pop mechanics
ncbookz 4 years ago
Good job! Hope to see more of this soon!
brianempson 4 years ago