2001 Dodge Cummins with 4" Diamond Eye exhaust

[SuzukiBoy77]

Damn nice truck bud, i believe those are the same exact rims i have though haha

[Prowelder24]

@SuzukiBoy77 Awesome!!

[SuzukiBoy77]

@Prowelder24 They are Pacer's right? Look damn good on the truck except mine was used and i dont think them rims have ever been cleaned, so im taking a couple hours to sand them down and buff them out

[Prowelder24]

@SuzukiBoy77 Yep that's what they are. They were on the truck when I bought the truck and I polished them all up at one point. They need it again but until winter is over, it would be pointless. lol

[SuzukiBoy77]

@Prowelder24 Haha yeah thats what im saying with my rims. Im waiting until summer to do alot with my truck. I am ripping its running boards off and will probably put stainless steps on it. Possibly a south benz triple disk clutch because the edge juice is having its way with my stock clutch haha. Then the 110 horse injectors, and light bars and i think i will be done

[Prowelder24]

@SuzukiBoy77 Yeah for the time being, everything is caught up. When summer gets here I'm going to build some new step bars, something kinda like N-Fabs. Or I might just buy a set of them, I don't know yet. Then I've got a lot of work to help do on a friend's rig. But I'm pretty much down to just needing either twins or a larger single, water/meth, headstuds, and a Smarty stack. Then maybe some little things that I can't think about right now. However, they are never "done" are they?? HAHA!

[SuzukiBoy77]

@Prowelder24 Lmao i know right!! You will be saying "damn i own the best damn truck in the world" Then you see a truck go rollin by with something you never even thought of and think to yourself. "Hot damn i gotta get me one of them!" Up where i work, a buddy of mine always has his truck in there. It's an 04 and he put atleast 20k just in his engine. All you have to do is let the clutch out a little too fast and its squealin the tires. lol thats american right there

[Prowelder24]

@SuzukiBoy77 That sounds like a beast!! I don't know if I could spend just 20k on my engine alone... On the other hand, it doesn't take that much to do it!! HAHA!

[SuzukiBoy77]

@Prowelder24 Lol let me tell you. I have a pontiac trans am. A little work done to the engine, its a WS.6 And he basically ate it alive. His truck is a six speed, so if he is just cruising on the highway doing 60 in sixth gear, all he has to do is smack the pedal to the floor and his truck will start burning the tires off. At 60mph! lmao his truck is rediculous.

[Prowelder24]

@SuzukiBoy77 WOW that's impressive!!

[CATZR600BRAAAAAP]

@SuzukiBoy77 in 6th gear at 60 he burns the tires off.... hahah wake up and stop dreaming.

[SuzukiBoy77]

@CATZR600BRAAAAAP Lol you trust me now buddy. He has over 16 grand invested in his engine alone

[CATZR600BRAAAAAP]

@SuzukiBoy77 lets see it

[SuzukiBoy77]

@CATZR600BRAAAAAP Well I haven't seen him around, now your going to say im just saying shit because i dont have a video. But if i did, i would love to share it because his truck is just amazing

[CATZR600BRAAAAAP]

@SuzukiBoy77 It does kinda sound like bs, but im not gonna say your a liar, that'd honestly would be a sweet video to see.

[rangaman86]

Dammit Winslow, you got the same tires I'm putting on my truck!! Same turbo, same exhaust, and now same tires!! Shit!! I think you would've noticed more performance gain from the exhaust if it was a stock truck. I did. Plus you can hear that hybrid whistle a TON more!! Sounds a lot better man... But STOP buying shit I have!!!! lol just kidding man!! Nice rig!!

[Prowelder24]

@rangaman86 HAHAHAHA I guess I'll have to do something different.... thinking twins? lol

[rangaman86]

@Prowelder24 Dink! lol hahah

[Prowelder24]

@rangaman86 But next are batteries, step bars, ladder bars, headstuds, hood paint, and maybe some other minor things. Any of those are your list?? Or do you already have them? lol

[rangaman86]

@Prowelder24 I got the step bars but I'm taking them off. Trucks been off the road since July. Trying to save for a paint job this spring. Also going to do 17's with 35" fierce attitude tires. Then going to add a billet input, laminated flexplate and a new 3 disc goerand converter. Then the twins and what not. Then I'm done!! hahah

[Prowelder24]

@rangaman86 Awesome man!! That will be one nice rig once you get it done!!

[rangaman86]

@Prowelder24 Take me a little while but she'll be perfect when its done. Be a nice summer toy. Buying a little beater truck for the winter to try and keep the salt off the diesel

[Prowelder24]

@rangaman86 That's why I bought a modern truck to save my classics!

[doubleblackD]

Thanks for the info. The only reason i'm debating on the straight pipe is it's cheaper! haha. Could you notice a quicker spool up compared to the 3" straight pipe?

[Prowelder24]

@doubleblackD Haha that it is. As for spool up, maybe a little, but nothing to brag about really. 

[doubleblackD]

So, i have a question for you. I am in the same situation as you were. Stock exhaust straight piped and i'm looking at the 4 inch diamond eye system... Do you like the version with the muffler? I can't decide whether to go with the straight piped system or not...

Thanks in advance.

[Prowelder24]

@doubleblackD I love it!! I didn't like the sound level of the straight pipe which is one reason I wanted a new exhaust. If your truck is a shortbed quad cab, then it will come with an extra piece of pipe. If it is a long bed, well I guess you will have to buy a piece if you decide to straight pipe it. I prefer the muffler but that's me.

[grizzlyman239]

do you know the numbers on urs? and thats right below the vp pump or by the pan?

[Prowelder24]

@grizzlyman239 Yeah my is a 54 block which is a good block too. It's right above the oil pan.

[grizzlyman239]

@Prowelder24 ok i was just wanting to know.

[Prowelder24]

@grizzlyman239 Glad to help you out!

[grizzlyman239]

@Prowelder24 thanks and ill still have to find out what i have. thanks again

[spacecalander]

Sounds great! finally a 2001 new video, did you get to hear how it sounds with no muffler?

[Prowelder24]

@spacecalander I drove it for over a year with the stock 3" straight pipe so yeah. I've even got a video on here too of the way it was.

[rangaman86]

Sounds good Winslow!! Thumbs up for sure for sure!!!

[Prowelder24]

@rangaman86 Thanks man!!

[grizzlyman239]

thats not good. when did they start doing that? and when did the go to the other block? and whats the other blocks number?

[Prowelder24]

@grizzlyman239 They did it from 1998-2001 24v engines. However, a few 12v engines even have this block. The other numbers are 54, 55, 56, and a bunch of little numbers. Any of those are good blocks to have.

[Platinumflamepyro]

@Prowelder24 That we do that we do! Need to get this going soon too.

[Prowelder24]

@Platinumflamepyro That we do!

[Platinumflamepyro]

I'm a good friend of his I drive a 98 quad cab SLT LARAMIE 12v automatic. Its the Holy grail of 12v trucks.

I run DTT billet band anchors, struts, servo, accumulator, and shift kit. 4" K&N Clamp on, custom heat shield, 4k GSK, 60# valvesprings, 4" straight pipe, 2.5" HBS leveling kit, 35x12.50r16 M/T BAJA CLAWS on 16x10" DICK CEPECK DC-2 Wheels. Soon to have a pusher style intake and tow mirrors as well as new intercooler clamps and boots.

[Prowelder24]

@Platinumflamepyro We've got to get some videos up of the trucks man!!

[Platinumflamepyro]

Black Magic is the name of his truck, 2 cycle refers to the fact that he runs 2 cycle oil like what you put into mix gas for a 2 stroke engine, and he has a 54 block, one of the strongest block castings available.

[grizzlyman239]

so have you all done to the truck for performance mods



[Prowelder24]

@grizzlyman239 Black Magic! 2001 Ram 2500 QCSB, 4x4, 2-cycle, 54 Block!, NV4500, 3.55 gears, Autometer Ultra-Light: Boost, EGT, & Fuel Pressure, Valair 13" Kevlar/Ceramic 3400 lb Single Disc, Valair Hydros, Edge Comp, Jkidd 150 hp matched sticks, 4" Diamond Eye w/ muffler, HX-35/40 Hybrid, Custom Intake Horn, BHAF with 7075 T-6 Heat Shield & Red OuterWare, AFE Torque Tube, Air Dog II w/ custom cover, PSC Pump & Brace, Jkidd Sport Headlights, Tunnel Ram Intake, and High Idle Fooler!

[Prowelder24]

@Prowelder24 That's my signature off of CF. I'm known as Prowelder on there, Mopar1973Man's forum, Diesel Bombers, and HotRodDIeselClub.

[grizzlyman239]

@Prowelder24 wow thats a lot! what the black magic thing? and 2 cycle 54 block?

[Prowelder24]

@grizzlyman239 Yep, the 2 cycle is for lube for the VP. You mix an once per gallon in the fuel. Black Magic is the name of my rig and the 54 block is the block number.

[grizzlyman239]

@Prowelder24 ok does the oil mess any thing up? and were do you fine the number on the block?

[Prowelder24]

@grizzlyman239 Nope, it adds lube to the fuel. Cummins even authorized up to 5% of waste oil but I wouldn't use that much nor use waste oil. The number on the block is the front driver's side behind the power-steering pump. Check out Mopar1973man.co for more info on the 2-cycle and just Google "53 block" for more info on that.

[grizzlyman239]

@Prowelder24 ok so 54 is better.

[Prowelder24]

@grizzlyman239 Yeah the 53 block has a thin, weak water jacket walls. It has the tendency to crack and leak water.

[grizzlyman239]

@Prowelder24 i don't see 53 on my block so how to find the other numbers.

[Prowelder24]

@grizzlyman239 Well there should be some little numbers on the block. If you Google "53 Block" some info will pop up that should help you out.

[grizzlyman239]

@Prowelder24 so the little numbers mean its not a 53 block?

[Prowelder24]

@grizzlyman239 Yep if you have the little numbers, those are suppose to be the best blocks made.

[grizzlyman239]

@Prowelder24 sweet so if i get the numbers who should i talk to when i get the little numbers?

[Prowelder24]

@grizzlyman239 That I don't know. But really since you've got the little numbers, I won't worry about it. I don't know if anyone decoded them... Really not a need to though.

[grizzlyman239]

nice i wat to get rims for mine

[Prowelder24]

@grizzlyman239 They really help set off the truck, that's for sure. I got lucky and it already had these on it when I bought it!! That was awesome!!

[grizzlyman239]

@Prowelder24 man your lucky. wish i could fine some cheap



[Prowelder24]

@grizzlyman239 LOL I don't know if I am or not. But I feel like I was on this truck. It had some fun goodies on it when I bought it and it was a good price too!

[grizzlyman239]

@Prowelder24 nice mine came with stacks. and supper chip but i got rid of that.

[Prowelder24]

@grizzlyman239 Mine came with the Edge Comp, Autometer gauges, rims, steps, nice stereo with subs and amp, and the straight pipe on the stock exhaust.

[grizzlyman239]

@Prowelder24 nice i got after market radio when i bought mine 2. how many mile do you have on yours?

[Prowelder24]

@grizzlyman239 It had like 207k when I bought it, now has 235,600ish.

[grizzlyman239]

@Prowelder24 mine had 154,000 now i have 167,800ish.

[grizzlyman239]

what size are the tires and rims? and what kind?

[Prowelder24]

@grizzlyman239 The tires are 315/75R16 Fierce Attitude MTs. The wheels are 16" Pacers. I think they are 10" wide, but I'm not 100% sure. I really like the tires, they aren't too loud going down the highway and drive pretty nicely. Haven't really had a chance to "test" them out yet though... lol