Added: 3 years ago
From: hescobal
Views: 44,657
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (99)

Sign In or Sign Up now to post a comment!
  • can i do this with an rc 18b losi

  • Awsome... Mine can run at 92km/h but yours looks like can run at 170km/h or some thing O_O

  • how fast is it

  • 14.8 volts x 9400kv = 139,120 RPM. electic is the way to go

  • now i know what they mean when they say you can never put too much in a car lol

  • looks like atleasy 100 mph ballsack faggots

  • See if you can get a Tekin 2.5T 11.500KV 1/10 motor in that beast then run it on 4s lipo :)

  • @Vince62965 Use an octa x12 2.5 turn. My traxxas goes 135/km and im only using 2s

  • wat motor and esc do u have on it??????

  • HOLY SHIT!!!!!!!!!!!!!!!!!! THATS FAST!!!!!!!!!

  • hey awsome video man i just uploaded a few of my 18t2 brushless check it out and even subscribe more to come.

    -OffroadRcManiac

  • were did you get the rc18t at?

  • thats crazy :) have had the speed measured

  • what is the top speed

  • win true false

  • LOL that motor is running at almost 140,000 RPM on full throttle o_O

  • Where did you get the idea of flipping the rear suspension arms around? that is a good idea man! It adds some wheelbase and protects the rear shocks from "ass damage."

  • What battery pack is that? By what manufacturer?

  • on your rc18t you said you had a Hitec HS-65HB Servo. When you got the servo im guessing you used a hitec servo saver but did you just use the original mounting hols casue it look like your car works great!! so was just asking cause im think about buying a Hitec HS-65HB Servo and i just wanted to know how big a job it was

  • it is 4wd, right? i think i will get one of these with brushless. can i use 2s lipos with ''normal'' size? how big is your lipo battery in the video?

  • 4 cells on a 9400kv ??????????

    you are going to burn the shit out of it

  • damn

  • The 1/10th tires fits with the original mount?

  • how fast is that?

  • How did you get the wing on the back of the car I have the same one and I want to put a wing on it

  • OMFG what a fast car !

    Nice !

  • Holly crap that thing can probably out run my jato 2.5R ok maybe not but that thing is stupid fast

  • im pretty sure it could that thing is mega fast cause i have the same brushless system in my 18t

  • 139,120RPM to that small defenseless motor... Poor little guy =( sadface

  • can you tell me: how long is your lipo accu pack??

    i need to know that, my pack is 15 cm long !! and i want to use it in this car

    nice vid !! 5 stars

    (sry for my bad english)

  • i bet your bearings are worn doing like that

  • is that faster than the mamba

  • i got 1 of these but ma spur gear is stripped :(

  • is only 3 dollars at your local hobby store

  • Alot of power in that setup, brotha.

  • Coolman. Very cool. Shame the action footage isn't following the movement though.

  • was i on either of those surfaces in the video? nope

    The wing keeps the front end on the ground. If I had no wing, the car would wheelie and I'd have a bunch of broken parts

  • This car is mainly set up for high speed on road. As you can see the shock geometry is laying flat. Another option is to use a 12 scale body to have more downforce on the front end.

    That's some serious speed by the way!!! I'm planning to get my 18t running this fast too!

  • @needforspeedrc for someone with a name that suggests the need for speed you sure are a moron. a front wing is used so that it forces the air over the car therefore keeping the front end down.

  • hey man, have you ever got a speed check on it yet?

  • is the front wing mount home made? if so, how did you mount it?

  • oh and is the quark and motor you have rated for 4s??

  • Toe in provides straight line stability, but it may cause some loss in speed due to more rolling resistance. I took the trade off because I'd take the loss in speed so I won't have a car that loses control and crashes!

    Also, no, neither the quark or motor were rated for 4s. Quarks are outdated, look at picking up a Castle sidewinder micro and add your own heatsink, or just buy the mamba micro pro.

  • cool thanks man, yeah i allready have the micro pro, i like it alot. so you end up burnin up your motor and esc with 4s or is it still holdin up?

  • I see you mentioned you have a 3 degree toe in, i saw some rear hinge mounts with different degrees on thetoyz. what does that do/help with handeling?? im tryin to get the most out of my stupid fast 18t also. she hit 70 yesterday!!

  • hey were did you get that chassis?

  • google search diggity designs

  • thanks o i tried to find the a wing for mine i can't find one? where did u find it

  • no problem. As for the wing, I think I got it from The Toyz. A vendetta or Kyosho mini inferno wing should work

  • yep mini inferno wings work nice.

  • Because mounts the dampers contrarily? I see correct?

  • it seems it doesn't stops accelerating, that's scarying fast.

  • holy crap that thing is fast!  like the wing on the front as well thats a good idea

  • holly crap dude......thats nuts

  • how much are one of these

  • about £600 £1000

  • starting at about $180-200 for a ready to run model. then you pour the money in lol

  • you balance your wheels? might get a little let speed wob.

  • hwo fast do you think it goes cause i got the same motor set up in my mini t

  • does this overheat every time you run it?

  • Cool! but im more on an 18r fan, much more protected and handles really good. nice vid, but mine's faster! =D

  • wat r the lipos m8

  • i have a quark 33amp also but i cant seem to get it set up correctly if you could post a video of how to program mine like yours that would be the best

  • how much did that cost? for upgrades

  • How long does your foam tires usually last?

  • wats the mph

  • fastest so far is 64mph. New setup on the way

  • dang faster than mine,mine only goes about 55

  • I have the same thing minus the integy alloy steering. Having the car low helps a lot too. The spoilers also aren't just for looks. If I had no front spoiler, my car would have already wheelied and and crashed multiple times

  • Just wondering how you were able to get the steering so stable? I already have the DP drag link along with the integy aluminum steering kit. With a hitec metal gear servo, metal C clip for the servo & TI tuenbuckles. For some reason I just cannot get the car to remain stable for more then about 30ft? I'm running a Mamba Micro Pro with 8000kv & a 3S lipo 18c. I also am running 26mm front & 30mm rear 1/10th scale foams & nothing really seems to be helping.

  • Hey man, just wanted to ask something, are those tires long lasting on asphalt? and how long have you been using yours? thanks!

  • where do you get these things

  • Help please.

    my 18r performs better without the body.

    is that normal?? like it's more stable, turns better, and tracks better without the body. I ve cut the wheel opening bigger already but it still performs better without the body. is there anything i should check or do becuase id like it to perform just as well with the body

    thanks

  • That is insane.

  • Is my diff just loose becouse when i put my rear wheels to ground they stop but front wheels spin slowly?

  • No rigging things up, fits great!

  • holy sh!t

    does the losi 9400kv xcelren combo fit the

    18t without rigging things up

  • The motor 139120 rpm, can't belive it has the balls to handle that

  • at first it sounded like a jet engine winding up to speed haha

  • how long does your batery last? what kind is it?

  • I have 18T with 3s 20c 2200Mah 11.1V, But have problems with the Diff. the tooth jump over the others in 6 or 9 runs. 1)What can i do to get results. 2) How Can i do my 18t pousi traction.

  • how can i get my 18r going this fast?

    please help :(

  • easy. read the description.

  • That must be a durable motor and esc to handle that much juice, Im thinking xcelorin is the best sensorless stuff, wish they would make a sensored 18 scale like the novak mongoose.

  • is 1/18 xcelorin or 1/18 mamba max better?

  • "get ready to make the jump to hyperspace"!

    thats what i kept thinking when i was watching this. how did you mount the front and rear wing?

    vendetta on the rear?

  • Oh shizney! Crazy fast.

  • I'm scared.

  • whats the point in flipping the rear a-arms for?

  • It's a cheap and easy way to extend your wheelbase.

  • now thats fast

    how fast does that thing go?

  • lol wow never seen foams ballon before

  • i love it

  • no no light speed is to slow we need ludacris speed. ya buddy that thing flat gets out and moves

  • HHOOLLYY CRAP that's crazy

  • that´s a bad boy....

  • I'm sorry but that's stupid fast.

  • holy cow! you had it on the stand and it just kept winding and winding! that's just not right! nice video!

  • was waiting for it to lift off

  • HOLY SHIT DUDE...that's crazy (BTW, its your buddy Junk aka I Roll Lazy...who sells you stuff that doesn't work, haha, just kidding).

  • Hey whats up!? Are you stalking me? lol J/K. Thanks again for the charger!

    I used it to charge the batteries in this video ;)

  • Sweet. Good to hear it...can't believe what kind of a monster that car is.

    Too bad the charger is only good for 3S. :(

  • Little guy is moving. Get it on radar.

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more