I have a 89 k5 with 40 pro comp tires when I try to rock crawl it bounces wildly 4inc lift any ideas.It dont seem like axle wrap.It just hops like a 6000 pound rabit.
@K20wheeler This is a old set up i had on the crusher, in this video i had crossover steering, with 39.5 tsl on about 5 inch's of lift with alot of fender trimming for flexing reason's Now i have the same size tires even lower lift and tons more flex. Running 56" spring front and Rear. Check out my page for a playlist of videos, i have dont a full one ton swap up front now, high steer. Keep on rockin bro.
i wish i could afford a dana 60 front but i got a hd 44 and a 14 bolt for 400 and i got another 14 for 100 so i guess ill be ok ill save my pennys and dimes and get one someday sick jimmy tho beat it break it and repeat it'll take it
@68chev4x4 Thanks bro, i love all old school chevy man. The Crusher had a Dana 44 and 14b FF in this video. This is the one of the reason i up graded got tires of breaking axle's bro. =0) but i was Welded up front and running 40's. You can diff get away with it running 37" and Selectable locker up front like ARB Air locker or Electric locker.
can u give me the low down on the truck in this video? i got an 88 jimmy i wanna crawl with it has 33 inch bfg mud terrain, it has a eaton limited slip in it now . i have plans for it such as a 4inch lift d 60 &14 detroit locker 4:11 and 37 and other stuff but im 16 so i dnt got alot of cash. how much can 10 bolts handle with a 4 inch and 35. or wat would be the best thing to do to it for 1000 bucks. like a detroit locker and 35`s??
Well i have a spring swap called the 52/56 inch spring swap, but i have 56's up front and rear on my truck. it take a little more work and cost about the same a a good lift, but the outcome is ten times better with flexing, but this set up for Trail rigs not recomended for daily driving rides bro. For a 10 bolt the max tire you want is a 33 and locked out back with a detriot and a limited slip up front works great and keeps axle shaft breaks down, if you lock the front it will break.
@1magh3ttoman For a lift it and a simple swap, would have to recomend TUFF COUNTRY, because of they make ther springs with great spring rate for flexing and trail rideing, While other ride stiff and dont flex tuff country flex and ride good, alot of rock crawlers doo. A 4 inch lift would work out perfect for 33 inch tires bro. Also if you still have your stock push and pull steering you gonna want to upgrade to a crossover set up. Private message me ill give you my number to talk about this stuf
@tozir14 Cheap bro, these truck are afforadable and a great all around wheeling Mudd truck and Rock Crawling. You can go extremem mudder or extreme rocker, or even stay kinda imbetween and make one sweet Wheeler truck man. Check out my new vids of this truck in action have a NEW DANA 60 up front and new SUPER FLEXY SPRING ALL THE WAY AROUND.
@dodgeman86 They are 39.5 tsl's Grooved. Thanks for the comment bro, here im running a 14bff rear and dana 44 front. But now have full one tons dana 60 and 14bff fully built.
check out the new flexing video i got with the new one ton up front and flexy ass spring up front man. IT ROCKIN EVEN MORE NOW. Gonna be wheeling very soon and making vids. SUB IF YOU LIKE. ROCK ON MAN.
@steveandant dana 44 yup, that sucker last tons of trip being welded. Buddy has it in hi ranger now, and i got a 60 up front now man. Check out my other videos in my list when you get the chance bro. Thanks for watching
thanks man. i had no dash and gauges when i got it. made something out of sheet metal and auto zone gauges. check out the pics at the end. ROCK ON BRO.
I had to sell my k5, it was a sad day, now the guy who bought it is selling it for alot more... watching this video keeps my memory of her alive, once I get outta basic training I am debating on a Suzuki Samurai, or a CUCV m1009 what should i get?
a SUZUKIE SAMURAI with a cucv drive train. one ton that baby and wheel it anywere. =0) But if you can't find both then just get a cucv cuz it already has one tons, mostlikely.
@dbzgt545 yea theres alot of sammy's in my area for cheap, parts are cheap for it too, a cucv would cost me over 4 grand not including shipping to my place LOL, ill figure it out once i get my crap done with Ill talk to you soon buddy
@perezl1 They are biasply tires and 20 pds is the max. i had them at 12psi. They really dont start to wrinkle and fold tell i put them to 9psi but didn't feel like loseing a bead that day so i left them at 12 buddy. =0) ROCK ON BUDDY. thanks for the comment
@therizz602 Cool buddy, thanks. actualy about to do a 60 swap up front check out my vid on my page man. Got the first video up. Gonna be able to rip it up them ledges now. =0)
awesome man, still a sick 80's here soon hopfuly the 88 blazer will be back in action last trip we kinda shattered the trans so when shes back vids will be going back up but looks like a blast man
I have a 89 k5 with 40 pro comp tires when I try to rock crawl it bounces wildly 4inc lift any ideas.It dont seem like axle wrap.It just hops like a 6000 pound rabit.
dbzluva987654321 3 weeks ago
@dbzluva987654321 only eles you can try is to get better shocks to asorb whats happening.
dbzgt545 3 weeks ago
alot of 14 bolts just welded last forever. just set my friends up with 56" rear and welded. waitin on the 60 for the front.
383truckss 1 month ago
What size lift an tires do u run? I have a 85 k30 4inch an 38 TSLs. Do u run the Cross over steering or Highsteer?
K20wheeler 2 months ago
@K20wheeler This is a old set up i had on the crusher, in this video i had crossover steering, with 39.5 tsl on about 5 inch's of lift with alot of fender trimming for flexing reason's Now i have the same size tires even lower lift and tons more flex. Running 56" spring front and Rear. Check out my page for a playlist of videos, i have dont a full one ton swap up front now, high steer. Keep on rockin bro.
dbzgt545 2 months ago
very nice rig
TheWhitneyfam 3 months ago in playlist My GMC JIMMY CRUSHER Edition
@TheWhitneyfam thanks bro, have some newer vids of it on my page. Keep on rockin man.
dbzgt545 3 months ago
@dbzgt545 look into building a 14bolt front iv'e seen them and there tank status
TheWhitneyfam 3 months ago
i wish i could afford a dana 60 front but i got a hd 44 and a 14 bolt for 400 and i got another 14 for 100 so i guess ill be ok ill save my pennys and dimes and get one someday sick jimmy tho beat it break it and repeat it'll take it
68chev4x4 3 months ago
@68chev4x4 Thanks bro, i love all old school chevy man. The Crusher had a Dana 44 and 14b FF in this video. This is the one of the reason i up graded got tires of breaking axle's bro. =0) but i was Welded up front and running 40's. You can diff get away with it running 37" and Selectable locker up front like ARB Air locker or Electric locker.
dbzgt545 3 months ago
can u give me the low down on the truck in this video? i got an 88 jimmy i wanna crawl with it has 33 inch bfg mud terrain, it has a eaton limited slip in it now . i have plans for it such as a 4inch lift d 60 &14 detroit locker 4:11 and 37 and other stuff but im 16 so i dnt got alot of cash. how much can 10 bolts handle with a 4 inch and 35. or wat would be the best thing to do to it for 1000 bucks. like a detroit locker and 35`s??
1magh3ttoman 7 months ago
Well i have a spring swap called the 52/56 inch spring swap, but i have 56's up front and rear on my truck. it take a little more work and cost about the same a a good lift, but the outcome is ten times better with flexing, but this set up for Trail rigs not recomended for daily driving rides bro. For a 10 bolt the max tire you want is a 33 and locked out back with a detriot and a limited slip up front works great and keeps axle shaft breaks down, if you lock the front it will break.
dbzgt545 7 months ago
@1magh3ttoman For a lift it and a simple swap, would have to recomend TUFF COUNTRY, because of they make ther springs with great spring rate for flexing and trail rideing, While other ride stiff and dont flex tuff country flex and ride good, alot of rock crawlers doo. A 4 inch lift would work out perfect for 33 inch tires bro. Also if you still have your stock push and pull steering you gonna want to upgrade to a crossover set up. Private message me ill give you my number to talk about this stuf
dbzgt545 7 months ago
great vid. i'm thinking about getting a project truck, how would one of these be as a week end warrior?
tozir14 7 months ago
@tozir14 Cheap bro, these truck are afforadable and a great all around wheeling Mudd truck and Rock Crawling. You can go extremem mudder or extreme rocker, or even stay kinda imbetween and make one sweet Wheeler truck man. Check out my new vids of this truck in action have a NEW DANA 60 up front and new SUPER FLEXY SPRING ALL THE WAY AROUND.
dbzgt545 7 months ago
where are yall at im in waco and lookin for a club to get into.. theres a couple around here but none catch my intrest..
dodgeman86 8 months ago
what size tires? im slowly tryin to get mine where urs is.. pretty nice..
dodgeman86 8 months ago
@dodgeman86 They are 39.5 tsl's Grooved. Thanks for the comment bro, here im running a 14bff rear and dana 44 front. But now have full one tons dana 60 and 14bff fully built.
dbzgt545 8 months ago
nice thats good shit bro!
docreefer86 1 year ago
@docreefer86 thanks bro, =0)
check out the new flexing video i got with the new one ton up front and flexy ass spring up front man. IT ROCKIN EVEN MORE NOW. Gonna be wheeling very soon and making vids. SUB IF YOU LIKE. ROCK ON MAN.
dbzgt545 1 year ago
lost the 10 bolt lol
steveandant 1 year ago
@steveandant dana 44 yup, that sucker last tons of trip being welded. Buddy has it in hi ranger now, and i got a 60 up front now man. Check out my other videos in my list when you get the chance bro. Thanks for watching
SKULL CRUSHER ADVENTURES.
dbzgt545 1 year ago
Did you blow the d60 shafts or is that the old 44?
rebelsoutherner 1 year ago
@rebelsoutherner
dana 44 in this video, have't wheeled the 60 yet. Waiting on parts then gonna go rockin man.
dbzgt545 1 year ago
nice truck man!
dirtbikeracer24 1 year ago
@dirtbikeracer24
thanks man. i had no dash and gauges when i got it. made something out of sheet metal and auto zone gauges. check out the pics at the end. ROCK ON BRO.
dbzgt545 1 year ago
I had to sell my k5, it was a sad day, now the guy who bought it is selling it for alot more... watching this video keeps my memory of her alive, once I get outta basic training I am debating on a Suzuki Samurai, or a CUCV m1009 what should i get?
SHOOPDAWHOOP0987 1 year ago
@SHOOPDAWHOOP0987
a SUZUKIE SAMURAI with a cucv drive train. one ton that baby and wheel it anywere. =0) But if you can't find both then just get a cucv cuz it already has one tons, mostlikely.
dbzgt545 1 year ago
@dbzgt545 yea theres alot of sammy's in my area for cheap, parts are cheap for it too, a cucv would cost me over 4 grand not including shipping to my place LOL, ill figure it out once i get my crap done with Ill talk to you soon buddy
SHOOPDAWHOOP0987 1 year ago
If you want up more easy then remove some air at the tires (15 - 20 lb) you can use whitout problem.
perezl1 1 year ago
@perezl1 They are biasply tires and 20 pds is the max. i had them at 12psi. They really dont start to wrinkle and fold tell i put them to 9psi but didn't feel like loseing a bead that day so i left them at 12 buddy. =0) ROCK ON BUDDY. thanks for the comment
dbzgt545 1 year ago
a roll of duct tape on that seat and it look like new. one bad truck bro
stevemcgranahan 1 year ago
@stevemcgranahan some 200mph tap can fix many things. NASCAR APPORVED.
I KEEP A ROLL in my z71 for emergency. lol
dbzgt545 1 year ago
nice truck boss. chewed that steel up on that axle SKULL CRUSHER!
stevemcgranahan 1 year ago
This has been flagged as spam show
nice work man... You drive her like i do keep going till you break something and then some lol.... truck is looking great...
therizz602 1 year ago
nice work man... You drive her like i do keep going till you break something and then some lol.... truck is looking great...
therizz602 1 year ago
@therizz602 Cool buddy, thanks. actualy about to do a 60 swap up front check out my vid on my page man. Got the first video up. Gonna be able to rip it up them ledges now. =0)
dbzgt545 1 year ago
Nice video man have a good one
CrazyBroncoMan135 1 year ago
thanks you too... bro. Sub me i got some new videos coming of the 60 swap.
dbzgt545 1 year ago
awesome man, still a sick 80's here soon hopfuly the 88 blazer will be back in action last trip we kinda shattered the trans so when shes back vids will be going back up but looks like a blast man
Corbin4538 1 year ago
Love the Jimmy! Wheeling in TX looks like a blast. I need to get down there someday.
cdm121880 1 year ago
Thanks man, check out my other videos. diff gonna be getting more vids up.
Skull crusher is getting a 60 swap and im diff wheelin it and makeing a video of it. =0) thanks for the comment.
dbzgt545 1 year ago
nice ! this is an other good video man !!! keep it up =)
MUDSTERmachine 1 year ago
Thanks man, hopefully im gonna have a 60 pretty soon fully builts =0). Ill make a video of it.
dbzgt545 1 year ago
Cool, if you ain't bracken parts you ain't wheeling.
recoveryteam 1 year ago
Hell Yeah man. =0) Thanks for the comment
dbzgt545 1 year ago
Cool vid man!!!
rekjavicxxx 1 year ago
awesome thanks buddy, hopefully after my 60 swap i can get up on it . =0) owee yeah.
dbzgt545 1 year ago
SICK!!!! good video man!!
franklast 1 year ago
@franklast
thanks man, Gonna be throw my spare axle shaft in today. And diff gonna get me doing that sucker on video. =0)
dbzgt545 1 year ago
@dbzgt545 can't wait man!!!
franklast 1 year ago