Sampling Your Sound Card into FL Studio Edison (MP3 Version)

[x0myheart0x]

Ok. I am running FL Studio 10 on Ubuntu/ Linux.

I cannot hear any sounds! I've tried with and with out headphones, I've opened the piano roll and clicked notes, I've tried different instruments, and there is NO sound!

I've tried going to options, then Audio settings, and tried "Default" AND "Primary" NO SOUND for either.

What do I do?!

[tzoompy]

i got in the edison with the song... problem is , at playback the peaks work sound dosint.. what is the problem, i did all the steps:(

[veksu9]

Invite me :)

[CloudMac11]

... or you could save time and drag the full mp3 into edison, then chop it... -_-

[ItsYourBoyo7]

Hey Man, Have You Ever Have A Problem Loading Edison In FL Studio? When I Go To Load It, Its Saying Can Not Find, But Its In My FL Studio Folder!! Any Help Would Be Appreciated:)

[cstheboy86]

i followed every step but when i open the mixer the only sound that shows in the bar is my internal microphone on my laptop??? do you have any idea what i need to change?

[antt50]

HEY,, HOW CAN YOU DO THIS IN WINDOWS 7 SETTINGS

[pulp92]

how do you do this with windows 7 settings?

[JingleBerries11]

sound blaster live! or Diamond xtreme sound 5.1 ?? with Fl studio 9.5? sorry for crappy sound cards is just what i have at the moment Lol

[SampleSimple]

@JingleBerries11 A simple sound blaster live WITH ASIO will work perfectly. Try them both out, you might be able to rent each of them for a few days from your local music store then make your decision from there. Just make sure they support ASIO.

[WingWangDooFoo]

Thanks a bloody heap, helped a lot

[SampleSimple]

@WingWangDooFoo You're welcome. Stay tuned for more...

[UGonnaEatUrtots]

hey i was wondering, im planning on getting FL studio but i want to run it on my labtop which is well equipped processor and memory wise, but it does have integrated audio, would FL studio still work up to potential?

[SampleSimple]

@UGonnaEatUrtots Hi - FL Studio will run good however be aware that not all integrated audio will work as FL Studio requires ASIO to record. In this case you can try ASIO4ALL but I would highly recommend getting an external soundcard with ASIO drivers.

[TheNoblesGuild]

Thanx. zI didnt think 2 use ASIO. I had it on Primary Sound Driver. But FLcant record anything without ASIO.

[SampleSimple]

@TheNoblesGuild Indeed. Always remember you need ASIO to record audio into FL Studio. Please pass the message along to all of your FL Studio friends.

[JaLomangino]

hey i have windows vista and im in my control panel but nothing says sounds and audio device properties it just says sound...and then i can't find anything...

[FlowDeBarrio2004]

Ok, I have a problem!!! I was messing with my audio settings on FL Studio and out of nowhere a beeping started coming out from my speakers and now it beeps like every45 sec. even when my FLStudio is closed. PLEASE HELP.

[psilentDM]

MAN....I can't thank you enough! Perfect Tutorial.

[SampleSimple]

@psilentDM Great. Glad it helped.

[xSTiZZLE]

i dont get this shit, my control panel doesnt even look like this, im confused...and pissed

[shietnigguh]

what does the sound card do? is it to make fl studio sound professiona when it is export to a mp3 file? somebody help me.

[SampleSimple]

Hi shietnigguh, The soundcard is used to record and playback sounds in your computer. You must use a soundcard to work in FL Studio.

[mrdawud]

Thanks a lot for this video man. It helped a whole lot.

[SampleSimple]

Hi mrdawud, Glad it worked out for you. Stay tuned for more!

[Legahsee1]

dude...i was sampling through edison perfectly fne til today im trying to use a chopped mp3 sample from clerks 2 but when i play it in edison it work fine then i switch it to sliceX and nothing works for sound on fl ..but any other sound works.just fl dont

[KimoBeats]

hi!

nice tutorial i can record now! but i only got 1 problem i hear allot noise also and nearlly cant hear myself good and its very soft sound, help me?

Thanks anyway x

[SampleSimple]

Hi KimoBeats, You may need to check that the source you are recording is full volume and that your volume is completely turned up.

[TheElle88]

Hi

I followed every step in the video and succeeded in recording with edison. However, when i play the sampled beat in edison, the volumd is relatively low, that i can hardly hear it. It sounds as if i recorded a TV show with my cell phone.

Help ME!

[SampleSimple]

Hi TheElle88, Try turning up the volume on the Mixer track that Edison is placed on.

[TheMembraine]

thanks man now l really understand ! :D

[lilwindblo]

your fawKing song is annoying and dumb.. stupid bitckh!

[slayersaxe]

hey i followed all the steps in this video but when i choose my input on the mixer, i just get loud distorted noise (feedback) any ideas? ive been messing around for a while now trying to sample but seem to be stuck

[SampleSimple]

Make sure that you are already playing the audio first otherwise you will get that distortion.

[slayersaxe]

hey thanks for the reply but still no luck, i really dont know what i could be doing wrong

[redickalous]

just turn down your master volume in the mixer while recording and be sure to put your input back to none before turning your marter volume back on.

[BaBBoiHighFee]

any idea how to do this on vista?

[Darksoundez]

hey..my volume was not intel - R intregrad or something..my own is Realtek HD audio output..

is this sounds can make me record my vocal later..??

need your helpss....

[amb032]

how do you do this on a laptop? it says my input is "muxedin1-muxedin2" and the output is "not connected1-not connected2" what the fuck is that? and these options come up after i have changed the audio drivers to asiov2. if i dont change to asio it says i have no input or output whatsoever.

[SampleSimple]

Hi amb032, try to reopen FL with ASIO selected. Let me know how it goes.

[HiphopSilverhand]

nice vid

im looking for hiphop artist who need beats

come and check 'em on my channel.

the new fresh one is the "get away" beat.

listen to it HQ.

[SmacKFirst]

It doesnt work using FL 8

[DATEUSZ666]

ok that is fine, but you can just simply use goldwave and there is no need to configure as much and also you can manipulate not only with volume of particular channels.. here it looks that you need to change to much when it is possible to do it easier really... peace

[SampleSimple]

Hi DATEUSZ666, thank you for your comment. You are right about needing to change too much to accomplish this. Actually the new Edison standalone VST and EXE makes it possible to do this without the need for ASIO or any extra steps. You should check it out. Stay tuned for more.

[rh0cb0y]

mine's making a lot of noise when i do this. is there somethin wrong with my pc or anything?

[xNamikazeMinatox]

turn down the volume on ur beats to make it less noisy

[BBoyDirkNL]

hi i have windows xp.

i just do everything from the video but when i press f10 to chance the output to ASSIO4all, i cant do that because i haven't :S

what do i wrong?

peace

[Prophet6000]

Is there a update or something it wont work for me i can even get any audio to record or play on the mixer. I have vista and realtek High audio speakers

[2201jc]

im using windows vista

[2201jc]

can some one tell me were the sounds and audio device properties is at

i cant find it on the control panel

[SampleSimple]

Hi 2201jc, what version of Windows are you running?

[perplankton]

sweet video, just came across it. hit me up whenever

still

[SampleSimple]

Whatup Still, thanks for passing through. Hollar!

[fuckdisbitch13]

howcan i make the sound play in the windows media player while i have fruity loops open with asio driver on.?

when i have asio driver on i can't hear anything but what is in fruity loops.!

[coolesthomey63]

how do i do this on vista because this is definetely not working for me

[zxtwo17]

I've been trying to figure out the same thing.

[camry95black]

question for Sample Simple...does this work on the demo version?

[SampleSimple]

Hi camry95black. Yes it does. Give it a try. FL is one of the best free-trial-demo soft-DAW's on the market today giving you the ability to fully try out the software before you buy it. Plus it keeps all of your recorded and sampled audio files on your computer as well as the ability to export free MP3 beats/songs.

[thedaywalker2006]

How to open the MIXER IN list? Please help!

[SampleSimple]

Hi thedaywalker2006, make sure you have selected an ASIO driver in your AUDIO SETTINGS within FL Studio.

[thedaywalker2006]

Yes sir, I have done that, but I am having a problem opening the MIXER IN list!!!

[SampleSimple]

Is it not allowing you to select anything? What is the ASIO device that you are using?

[thedaywalker2006]

I am using ASIO4ALL V2.. The actual problem is that I do not now where to click to get the MIXER IN list...

[SampleSimple]

At 2:40 I show exactly where the MIXER IN list is. Check it out. Let me know.

[thedaywalker2006]

Sorry sir, I am very dumb. LOL. I cant see what we should click to get the Mixer In list :D

[Neko200]

My SigmaTelAudio soundcard only has these options: For playback: Volume Control Wave SW Synth CD Player Input Monitor For recording: Line In Rear MIC Microphone

[SampleSimple]

Hi Neko200, you may need to update your drivers or purchase a new soundcard.

[cpalrapk]

My voice sounds with echo the whole time!!

How can I fix it??

Help me please.

[kumitetom]

get a smaller head

[JohnLee1111]

yea i need this vid for vista too :(

[sage2good]

have u got these settings for vista os?

[Ronaldo99Pato7]

i did all of that mate and it works but it really record it will stay at peak even before i play anything

[SampleSimple]

Hi Ronaldo99Pato7, so it does record the audio or?

[niggakev]

i have a problem, i followed every step but there is no sound devices for me to click on in my (mixer in) drop list

ne help?

[SampleSimple]

Hello niggakev, you must have ASIO drivers installed on your system first. Then you need to select that ASIO driver (FL 8 includes ASIO4ALL device driver) in the Audio Settings window. Then you'll be able to select an INPUT in the mixer.

[caden311]

ITS SIMPLE LIKE THAT

[SampleSimple]

It is simple like that caden311. Thanks for watching and stay tuned for more videos.

[caden311]

its even easier if you just drop the mp3 file into edison

[duga775]

man, this aint workin for me. I put my soundcard in control panel to its proper source, n then in fl. I put it on asio4all. Bot in the mixer. there isn't any peak when I play a song in wmp. help.

[chochaos7]

In your mixer, try going to the channel that you will have the soundcard playing. On the right where you can add devices, click on the input at the top of it. Select your soundcard there. Also, for the mixer channel that you're using, you have to un-associate it from the main mixer channel.

Hope that explained it for you.

[acedrumsnyc]

when i try to selet asio4all v2 in the mixer I can't cause it's greyed out. I have FL 8.

[acedrumsnyc]

when I try to select the ASIO4all v2 in the mixer it's greyed out and I can't select it.

[gamegirl3211]

how do you turn the FL Studio Files into Mp3s?

[SampleSimple]

Set your project to SONG (SNG) mode. Go to File > Export > MP3 file

[m21mlv]

I got a problem-

in a place where you chose a asio4all i have only soundMax Hd and Primary sound driver.

Where can I get that asio4all if i don't have it???

[SampleSimple]

ASIO4ALL is included in the Setup program.

[misterasiandewd]

is there a tutorial or can you make one that can show how to record your own voice

[gpunkdomination]

I GOT A PROBLEM!! that is when i select the "stereo mix" in the "recording controle" menu as soon as i click it some spuky noise starts going off like a machine gun tatatatatttttataaata just like that, i dont kno why,n how can i FIX IT?? if u can answer me that ill apreciate it, thanx, ill be waiting for uR response on this.

it works playing my playlist into FLstudio7 but is making that machinegun noise idk why!!please help me thanx

[SampleSimple]

To be sure, play the sound file player first. You can then select the STEREO MIX then select your ASIO soundcard device driver then select your ASIO from the MIXER INput list.

[jamar1989]

Hey the only output cannels I have present on a 06 Dell Laptop are Line in and Mic...I tried using both and they do not work...

[SampleSimple]

You should have a MIXER or STEREO OUT. Make sure that you have checked all the possible settings that your soundcard presents in the Recording Panel.

[misterasiandewd]

can you use a mic to record your voice?

[SampleSimple]

Yes you can. Here at the SampleSimpleLABS we record all of our tracks and songs within FL Studio 8.

[Attila347]

great or just rip the song to your pc and done

[SampleSimple]

Yes. However these techniques can be used to record sound coming from the soundcard be it MP3, streamed, etc. Stay tuned for more videos expanding on this concept.

[GrimeUnearthed]

i tried it, all i get is feedback.

[SampleSimple]

Try playing the sound file player first. Just make sure there is a sound (MP3 or WAV) playing first then choose your INs. You'll be good to go from there.

[GrimeUnearthed]

I tried, and the same feedback was present... i think it may be my mixer settings? although when i tried with diffrent templates the exact same thing happened

[SampleSimple]

This should be working for you. Be sure to have the sound file player playing first then select your ASIO then your MIXER INput.

[GrimeUnearthed]

omg, that is the best soundcard recording methiod... ever...

[MSDesign87]

OH MY GOD

[babybark2]

I don't have a Big Peak Meter....any answers??

[meccahigh]

you dont even have to do that drag it over

to the eddison from the desktop sensless recording you lose clarity and shit...

if u doing a record it dont matter

[SampleSimple]

This is a soundcard recording technique. it allows for recording ANY sound being generated at the core soundcard level.

[youngquis161]

HELL YEA! STR8 2 THE FAVORITES LOL

[socal04]

siiick that shit works!!! but it makes my pc run slow, i might need more memory. keepm coming. peace

[SampleSimple]

We're glad it worked out for you. Yees you may need some memory as well as a solid soundcard. Stay tuned for more videos today.

[Nfamous7]

What if I have Windows Vista and everything is different from Windows Xp.

[SampleSimple]

They same rules apply however you may want to check your default Windows Volume Control Settings to determine recording settings for the core soundcard. We will soon have a Vista based version.

[cokecokecoke]

i have the same problem with the mixer in only having the 'none' option and when i go to switch the driver in the audio settings after pressing F10 the only options are 'primary sound driver' 'speakers' and 'none' there is no ASIO option

[SampleSimple]

Make sure you install the ASIO4ALL driver that is now included in all recent released versions of FL Studio. FL Studio 8 (the latest BETA version) incldues ASIO4ALL.

[meberra]

when i go to select "mixer in" the only option is None....

[SampleSimple]

Make sure you have an ASIO device driver selected first from the Audio Settings.

[pokernod]

Just search ASIO drivers in yahoo/google, freakn idiots, what do you people use your computers for, toast? Find ASIOall drivers (for basic integrated sound) and install, it will come up in the list of drivers now. Peace!

[vince2mas]

who's edison?

[SampleSimple]

Edison is the new FL Studio recorder.

[scotthutch23]

When I play music, then select a sound device from the list, I select the Stereo one. Then when I go into Edison The sound just goes up and down really fast, nothing close to the beat. Any ideas?

Thanks!

[SampleSimple]

Do you hear anything?

[scrillakeith]

for some reason when i try to sample something with this method it makes a loud noise when i select my soundcard and put edison on...any ideas?

[SampleSimple]

Try playing the music file first. Then set your soundcard.

[bochkia]

yeah drag and drop

[SampleSimple]

Keep in mind that these techniques can be used to sample any sounds that are being streamed or played through your soundcard like a streaming MP3, radio or any other streamable media.

[SampleSimple]

Keep in mind that these techniques can be used to sample any sounds that are being streamed or played through your soundcard like a streaming MP3, radio or any other streamable media.

[XacNoise]

I'm not 100% sure, but I've been trying to get this to work for a while, and it really does seem like you just can't do it in Vista. Vista's sound mixer is completely different, and I can't seem to find to right combo of settings. I used to do it all the time in XP.

[SampleSimple]

If you load a sound file, MP3, WAV, etc. into Edison, it'll typically take a bit of time to import the whole file into Edison. Also, you'll find it to be very sluggish when undo-ing and applying different effects on that whole sound file. By sampling the sound file, you can simply sample what is needed rather than messing around with the whole sound file. We are working on something that will ease this process. Stay tuned. And thanks for watching the video.

[dmgrubb]

wouldnt it be a lot easier just to load it into edison?