@FlyingRustler depends on whast kit your running, if you have a losi mini rock crawler, switch the shock and lower link places on the axle, and do that with both axles... flip the shocks on the axial kis so the shock body is near the axle.
@FlyingRustler another thing you can do to fight the twist is to put some nitro fuel line you might have, or some coffee stirrer on the shaft, because you dont want too much articulation, itll get less power to the axles.
are the badlands good for crawling, i have a set. i had them on my brushless rustler and they were wicked on it. but i was using them for dirt, grass, ect.
YES! my crawler is a full droop settup. Droop is better because if you get high centered your axles will drop down and grab the rocks, pulling you over or up whatever your stuck on, vs a normal settup. If you get high centeredwith it your axle cant drop down because your shocks are already fully extended. A spring settup is better for bashing because you can jump the truck and the springs can absorb it.
I dont agree with you on the subject of getting high centered, anyone can get high centered droop or no droop your clearance is technically the same or maybe even a little bit less with a droop setup, however the main advantage of running a droop setup is that your center of gravity is much lower. Regards.
now if i can just figure out why he is such a douchebag.....
remotecontrolhorror 6 months ago
are those bodies easy to paint nice truck
9motofreak 1 year ago
heyy can someone plz tell me if its worth putting rear wheel steering on a rock crawler thanks
Bigdog1496 1 year ago
@Bigdog1496 yes but for competition use its not allowed but many people use a dig for competition
bulldog32220 1 year ago
to low ued catch on things
nameloc1000 2 years ago
@nameloc1000 You had no clue what you as talking about when you wrote that did you?
TheMrJacksonShow 1 year ago
@TheMrJacksonShow was a noob at da time sorry
nameloc1000 1 year ago
@nameloc1000 Lol. I figured. A lot of people really didn't know what a comp truck really looked like and how unbelieveibly low they are.
TheMrJacksonShow 1 year ago
what do you do about torque twist?
FlyingRustler 2 years ago
@FlyingRustler depends on whast kit your running, if you have a losi mini rock crawler, switch the shock and lower link places on the axle, and do that with both axles... flip the shocks on the axial kis so the shock body is near the axle.
Monkeykid5228 2 years ago
thanks i have a mini rock crawler. the hard part is the springs are so soft.
FlyingRustler 2 years ago
@FlyingRustler another thing you can do to fight the twist is to put some nitro fuel line you might have, or some coffee stirrer on the shaft, because you dont want too much articulation, itll get less power to the axles.
Monkeykid5228 2 years ago
thats a good idea. would having droop suspension work also?
FlyingRustler 2 years ago
@FlyingRustler to a point, yes it would. it also depends on where the weight distribution is...
Monkeykid5228 2 years ago
thanks
FlyingRustler 2 years ago
is it waterproof
familyguylover911 2 years ago
are the badlands good for crawling, i have a set. i had them on my brushless rustler and they were wicked on it. but i was using them for dirt, grass, ect.
fillopygeesi 2 years ago
he probly used tcs plates
Draven1474 3 years ago
is drop good and is dig good
rccrawlerboy 3 years ago
YES! my crawler is a full droop settup. Droop is better because if you get high centered your axles will drop down and grab the rocks, pulling you over or up whatever your stuck on, vs a normal settup. If you get high centeredwith it your axle cant drop down because your shocks are already fully extended. A spring settup is better for bashing because you can jump the truck and the springs can absorb it.
ollieal96 3 years ago
I dont agree with you on the subject of getting high centered, anyone can get high centered droop or no droop your clearance is technically the same or maybe even a little bit less with a droop setup, however the main advantage of running a droop setup is that your center of gravity is much lower. Regards.
killerkowalczyk 2 years ago
why did you buy more bent links if the ones on it are already bent????
jacobsmith78 3 years ago
what battery mounts did you use on the front axle?
pigy15 3 years ago