@miketheknife2 Flies are fun. I did the razer trick as a teen with a .177 pellet & split it using a Crosman 2100 Don't know if I could do it again no luck with a Gamo big Cat no luck with a 1377 but then again I did not try for very long. Using my custom 2240 was easy but thats also a .22 making it twice as easy. If you make a video send me a link :-)
@imapimpyournot Cool I will have to try it with soft air bb. My two GBB pistols the WE baby hi capa & Tokyo Marui G18C are extremely accurate little plinker's. Even more accurate then a lot of pellet pistol I have shot. With all the custom parts she is shooting 350 FPS. That should be more then enough power to split a plastic bb with a razer blade.
@Frezkey Good idea :-) Maybe in another video its not that big of a deal to me. Not that hard to split a pellet on a razor blade. There are some You tubers splitting .177 pellets on razor blades & thats twice as hard as a .22
Really cool trick! My 2240 is down for the count until I get a new valve, Might as well get the BOSS valve. Unless I can get a new valve cap for cheap. Guess I'll have to try this trick with the .177 Skiff, lol. Really though the Skiff A-3000 is not nearly as inaccurate as people have stated in some reviews.
the Top cap of the valve's side walls were worn down by stupidity from boring the cap out on a drill press and not protecting the top,(where the top seal goes) from spinning on the drill press table, the result was worn down side walls. The valve worked for a while, but I guess its not good anymore. If you have just the 2240 Valve cap thats all I need as I have a brand new top seal, I just don't want to waste it on this crappy cap as the sides will likly blow out again. Ammo? Next week somtime,
Want a challenge do you have one of those crappy Marksman air pistols. The 200 fps spring loaded one, Try doing the trick with one of these, On second thought (better not) it might bounce back at you.
Yep thats the one, beleive it or not it also shoots pellets and darts. It is your basic peice of shit "so called airgun" It has a range like no other 30 feet falling rapidly to the ground.
agreed^ however, it will make a nice primer fire gun when I'm done with mine! I hope! I'll likly put a longer barrel on with a silencer, fake if I have to to avoid legal troubles.
lol, the marksman 1010 is so powerfull it went right into a soda can at point blank range after much oiling and spring (shimming), it even dented the other side!!! man watch out for the 1010, lol, j/k'ing. Its so funny doing long distance shots and watching that pellet fall well before the target, lol. Yep I like my 2240's and Skiff's power no screwing around there! NOT TOYS!
I do have a marksman 1010 and I doubt it would even have enough power to split on the blade, it would likly mark the pellet then bounce off, lol. I'm working on Making it into a cool litle much more powerful primer fire gun using 209 primers or #11 caps with powder stuffed in the pellet skirt etc.
I hear springers are getting better Going to gas ram & all if you were to get anything for your storm XT call Crosman & order a gas ram for it You can keep it cocked & loaded forever & will not hurt the gun Plus there not very loud way less recoil. I had gotin a springer years ago when I turned 18 I took it back the next day could not hit nothing with it. Thinking about geting another one with a gas ram.
You have to make the springer better. I changed out my trigger with a GRTIII trigger whih enabled me to be able to adjust both stages. Thus reducing the creap to a min. Before I changed the trigger the gun shot like crap. It shoots just fine now. Speaking of springers check out the RWS pistol that gets 700 fps.
I didn't find it funny. really I didn't. But your right someone else like you would of beat you to it and said somthing simaler, terrible how some people act.
He was 2' away, whispering "I'm 25' away" into a paper towel tube.
tcorourke2007 5 days ago
Now you no i have to try this very cool i did hit a fly at 10 yard's but this is a challange.
miketheknife2 5 months ago
@miketheknife2 Flies are fun. I did the razer trick as a teen with a .177 pellet & split it using a Crosman 2100 Don't know if I could do it again no luck with a Gamo big Cat no luck with a 1377 but then again I did not try for very long. Using my custom 2240 was easy but thats also a .22 making it twice as easy. If you make a video send me a link :-)
Xxoo0o0o0ooxX 5 months ago
Nice
Shaboogyflip 5 months ago
@imapimpyournot Cool I will have to try it with soft air bb. My two GBB pistols the WE baby hi capa & Tokyo Marui G18C are extremely accurate little plinker's. Even more accurate then a lot of pellet pistol I have shot. With all the custom parts she is shooting 350 FPS. That should be more then enough power to split a plastic bb with a razer blade.
Xxoo0o0o0ooxX 5 months ago
@Xxoo0o0o0ooxX how bout my 1250 fps rifle :)
lexnircola 5 months ago
Not that hard with two pellet guns, next time show yourself shooting
edtoch 10 months ago
@edtoch Not that hard to do with one pellet gun :-) You should give it a try some time. As for now I just have one camera sorry :-(
Xxoo0o0o0ooxX 10 months ago
@Xxoo0o0o0ooxX Use a mirror =)
Frezkey 7 months ago
@Frezkey Good idea :-) Maybe in another video its not that big of a deal to me. Not that hard to split a pellet on a razor blade. There are some You tubers splitting .177 pellets on razor blades & thats twice as hard as a .22
Xxoo0o0o0ooxX 7 months ago
@edtoch You can see the big dent or chip in the razer blade.
Xxoo0o0o0ooxX 5 months ago
its called the davey crockett
DBag1212 11 months ago
@DBag1212 Nice!!
Xxoo0o0o0ooxX 11 months ago
You should try lighting a wooden match!
I seen it at a fair shooting gallery to win a prize.
Inteligento 1 year ago
use a smoothbore rifle and an axe
deaftodd 1 year ago
i used a axe head
camerl2009 2 years ago
i did this with my 1377
camerl2009 2 years ago
Nice its a lot harder with .177
Xxoo0o0o0ooxX 2 years ago
cant do it again tryed for 3 hours
camerl2009 2 years ago
LOL!!
Xxoo0o0o0ooxX 2 years ago
Really cool trick! My 2240 is down for the count until I get a new valve, Might as well get the BOSS valve. Unless I can get a new valve cap for cheap. Guess I'll have to try this trick with the .177 Skiff, lol. Really though the Skiff A-3000 is not nearly as inaccurate as people have stated in some reviews.
Nwest82 2 years ago
Do you you just need a seal for your valve? whats wrong with the valve cap? Did you damage it during valve work?
Let me know maybe i can help When do you need ammo?
Xxoo0o0o0ooxX 2 years ago
the Top cap of the valve's side walls were worn down by stupidity from boring the cap out on a drill press and not protecting the top,(where the top seal goes) from spinning on the drill press table, the result was worn down side walls. The valve worked for a while, but I guess its not good anymore. If you have just the 2240 Valve cap thats all I need as I have a brand new top seal, I just don't want to waste it on this crappy cap as the sides will likly blow out again. Ammo? Next week somtime,
Nwest82 2 years ago
Want a challenge do you have one of those crappy Marksman air pistols. The 200 fps spring loaded one, Try doing the trick with one of these, On second thought (better not) it might bounce back at you.
kriegmeister3000 2 years ago
Ow the BB gun with a 1 inch barrel to much power for me.
Xxoo0o0o0ooxX 2 years ago
Yep thats the one, beleive it or not it also shoots pellets and darts. It is your basic peice of shit "so called airgun" It has a range like no other 30 feet falling rapidly to the ground.
kriegmeister3000 2 years ago
agreed^ however, it will make a nice primer fire gun when I'm done with mine! I hope! I'll likly put a longer barrel on with a silencer, fake if I have to to avoid legal troubles.
Nwest82 2 years ago
lol, the marksman 1010 is so powerfull it went right into a soda can at point blank range after much oiling and spring (shimming), it even dented the other side!!! man watch out for the 1010, lol, j/k'ing. Its so funny doing long distance shots and watching that pellet fall well before the target, lol. Yep I like my 2240's and Skiff's power no screwing around there! NOT TOYS!
Nwest82 2 years ago
How hard?? I think a bee sting would hurt more?
Xxoo0o0o0ooxX 2 years ago
I do have a marksman 1010 and I doubt it would even have enough power to split on the blade, it would likly mark the pellet then bounce off, lol. I'm working on Making it into a cool litle much more powerful primer fire gun using 209 primers or #11 caps with powder stuffed in the pellet skirt etc.
Nwest82 2 years ago
O.K. Anny Oakley , that was awesome, Now do it blind folded. HE HE HE. I should try that with my Storm XT.
kriegmeister3000 2 years ago
Yea it a bit harder with .177 but that how i always have done it. With my 2240 it put a nice dent in the center of the blade.
Xxoo0o0o0ooxX 2 years ago
I hear springers are getting better Going to gas ram & all if you were to get anything for your storm XT call Crosman & order a gas ram for it You can keep it cocked & loaded forever & will not hurt the gun Plus there not very loud way less recoil. I had gotin a springer years ago when I turned 18 I took it back the next day could not hit nothing with it. Thinking about geting another one with a gas ram.
in .22
Xxoo0o0o0ooxX 2 years ago
You have to make the springer better. I changed out my trigger with a GRTIII trigger whih enabled me to be able to adjust both stages. Thus reducing the creap to a min. Before I changed the trigger the gun shot like crap. It shoots just fine now. Speaking of springers check out the RWS pistol that gets 700 fps.
kriegmeister3000 2 years ago
I was gwaking at that a few years ago but desided to get the 2240. With the longer berrel and brake the is almost no kick plus its .22 hits harder.
Xxoo0o0o0ooxX 2 years ago
weihrauch have been making a gas ram rifle for over 10 years.
silver760 2 years ago
I also had a pistol that was gas ram retunded that to as the pistol was only 400 FPS in .177 but it did look cool.
Xxoo0o0o0ooxX 2 years ago
When does a stupid shooting video turn in to a dirty video.However I do not find it stupid as I would not be posting it would I????
Xxoo0o0o0ooxX 2 years ago
Gas ram for you?
Xxoo0o0o0ooxX 2 years ago
Can you split a .22 using your dick instead of a razor blade with a .22 air pistol? I suppose it depends on how erect it is !! ROFL!!
silver760 2 years ago
Sad very Sad
Xxoo0o0o0ooxX 2 years ago
I know,but funny,iy just popped in my head this morning,had to be said,before someone else beat me to it!
silver760 2 years ago
What, did ya wake up with a BONER? Careful on using the word "beat" and "popped"
kriegmeister3000 2 years ago
I wish I woke up with a boner,not like when I was 14,stiff as an iron bar,gallons of jizz and could shoot miles : {
silver760 2 years ago
lol, ok now thats funny!
Nwest82 2 years ago
The guy must be part horse, ever see a horse blow it's load. Now that's funny too!
kriegmeister3000 2 years ago
Sick!!!
Xxoo0o0o0ooxX 2 years ago
LOL!! he's a sick man!But I dont give a sht
Xxoo0o0o0ooxX 2 years ago
I didn't find it funny. really I didn't. But your right someone else like you would of beat you to it and said somthing simaler, terrible how some people act.
Nwest82 2 years ago
This has been flagged as spam show
Now that's fucking funny. OUCH!
kriegmeister3000 2 years ago