or you could find an old rc car or anything that has a motor on it that spins and get 2 copper wires any copper wires i would probally use a red wire and a black wire and put it on the motor and on the other ends of the two wires put any battery you like or put a usb on the end or an aux ( so you can power it with your phone or ipod and i also put a switch on mine
to demon drugs95. Pixel discoloration happened to me before. I found if i turned the magnet backwards and waved it over the affected area, it would normalize.
Energy sources without the need for fuel or energy input exist ,But the coverup is very strong,Get a motor that needs no gas or electric input at LT-MAGNET-MOTORdotCOM ,Be the revolution!
@MrNolife14 This is how a motor works, it's just a cruddy tutorial. It doesn't tell you what of the five USB connections are ground, data, power, etc. Confusing these will make this possibly identify the unit as a device, rather than something like a light. It also doesn't tell you how strong of a magnet (too small won't work, too large is dangerous to your system) it doesn't tell you how much or what gauge of wire to use (too much won't work, too little will short your mobo) It will "work".
@guthix474 that only happens when you hold the magnet against your screen not when laying it nex tto it or something if you do hold it against it it will mix all collours on the spot you toutched wih the magnet ;)
@DemonDrug95 Its not permanent as this has happened to me once and i just degaussed my display and its all ok after. My display has that option i dont know about others may not have
@DemonDrug95 If you have a newer CRT monitor try going into the menu and choosing the Degauss option. Or you can buy a degaussing ring from the hardware store if its an older CRT. Newer flat screen monitors are not affect by electro magnetic fields.
or you could find an old rc car or anything that has a motor on it that spins and get 2 copper wires any copper wires i would probally use a red wire and a black wire and put it on the motor and on the other ends of the two wires put any battery you like or put a usb on the end or an aux ( so you can power it with your phone or ipod and i also put a switch on mine
theoneandonlydubstep 2 months ago
flu
kuliahpagisekali 4 months ago
what does it power
happycathy101 6 months ago
@happycathy101 it can power anything you like :) be creative
guthix474 5 months ago
to demon drugs95. Pixel discoloration happened to me before. I found if i turned the magnet backwards and waved it over the affected area, it would normalize.
KagomeHigurashi001 8 months ago
RUNESCAPE?! NOOOOB!
hzm32 9 months ago
for the armature or known as the magnet wire sand one whole side and then only one side of the other side
scienceresort 10 months ago
next time, please stop shaking the camera so much, hard to see what you are doing...
Nelrockz1 1 year ago
I really like your video! It's very nice.
You should try doing more things though:
More information
More entertainment
Muffinmanv2 1 year ago
This has been flagged as spam show
Energy sources without the need for fuel or energy input exist ,But the coverup is very strong,Get a motor that needs no gas or electric input at LT-MAGNET-MOTORdotCOM ,Be the revolution!
dharmastipulate 1 year ago
MOVE YOUR HAND ASSHOLE!!!
Runescapeing99 1 year ago
when i tried it my PC said ''New Hardware Found''
ripstickriderocks 1 year ago
This has been flagged as spam show
check out my video? comments/rate pls
sergiu20053 1 year ago
fakeandgay
MrNolife14 1 year ago
@MrNolife14 This is how a motor works, it's just a cruddy tutorial. It doesn't tell you what of the five USB connections are ground, data, power, etc. Confusing these will make this possibly identify the unit as a device, rather than something like a light. It also doesn't tell you how strong of a magnet (too small won't work, too large is dangerous to your system) it doesn't tell you how much or what gauge of wire to use (too much won't work, too little will short your mobo) It will "work".
silntdoogood 1 year ago
don't put an magnet near an monitor, my television pixel become messy -_-
Shiroblack 1 year ago
what would i use this for
Trev78910 1 year ago
physics FTW!
kidowner 1 year ago
Now that's cool, your using the USB Power from the computer to power your Simple but very effective Electric Motor, Nice Video.
Rated 5/5.
UserIsAnFBIAgent 2 years ago 2
use a battery
XXLATINCHOLOXX 2 years ago
nicolas tesla for the win
hector9462 2 years ago
oh wow...its an electromagnet...
rampagemilpool 2 years ago
why i asked to you. coz you haven't mention in the clip. where is sound in the clip.
bsnegi91 2 years ago
what type of copper wire should i take . bare or coated wire. let me know
bsnegi91 2 years ago 2
coated is needed but make sure that u burn like 1 inch from the end to the end so that it will make the electricity go through
guthix474 2 years ago 6
@guthix474 if it's magnet wire use steel wool to scratch off.....it works better and you cant burn your self or the wire. :D
chickenpoper 1 year ago
horsepower?
oyesoymanolo 2 years ago
español castellano argentino
matias00001 2 years ago
hey um.. dun put the magnet too close to your com it will make the pixels from the com to discolour..it happened to me once and its permanent
DemonDrug95 3 years ago 7
ok thanks for the warning i really didn't know that
guthix474 3 years ago
@guthix474 an LCD cannot be affected in any way by magnetic fields
QuickProfits 1 year ago
@guthix474 that only happens when you hold the magnet against your screen not when laying it nex tto it or something if you do hold it against it it will mix all collours on the spot you toutched wih the magnet ;)
Killgore521 1 year ago
only messes it up if you still use an ugly CRT monitor...
5h40573r 2 years ago 2
@DemonDrug95 thats only for CRTs i think, but it wil mess up any disks including a hd (not an ssd though)
stinkyhamster111 1 year ago
@stinkyhamster111 O.O
DemonDrug95 1 year ago
@DemonDrug95 not really permanent if u got the degauss function on ur monitor ;p
pwnage1407 1 year ago
@DemonDrug95 Its not permanent as this has happened to me once and i just degaussed my display and its all ok after. My display has that option i dont know about others may not have
stefnn0 1 year ago
@stefnn0 mine happened and still have the mark on it
DemonDrug95 1 year ago
@DemonDrug95 it happened to me and i just restarted the computer and the discoloration was gone. :)
katikyot20 1 year ago
@katikyot20 uhh..sometimess things just went reallly wrong and it stays there permanently like me = = but got a new screen anyways :p
DemonDrug95 1 year ago
@DemonDrug95 If you have a newer CRT monitor try going into the menu and choosing the Degauss option. Or you can buy a degaussing ring from the hardware store if its an older CRT. Newer flat screen monitors are not affect by electro magnetic fields.
Insignia96 1 year ago
@Insignia96 o.o dint knew that
DemonDrug95 1 year ago
hehe thanks but i dont see you on runescape anymore... are you like still playing??' cya
merry christmas
guthix474 3 years ago
hey guthix its me ii mau1 ii your friendly str pure =p nice vid i subbed rated....and other st00f
popcube360 3 years ago