Drag race tököl, Bishop's honda civic 1.4i turbo

[abec666]

My friend do you remember your torque on 0.6?

You used z6 head?

Thx

[dzsi2006]

Apu RX8-asa LOL!!! Nagyot lép, szép!!!

[bishopvideo]

@dzsi2006

Gondoltam "apu" kocsija, mert a kisgyereknek csak nem fussa hirtelen ilyen gépezetre....

Én apukámnak meg pláne... :)

[Welcome2SweetLife]

great video man, i have the same engine. can you tell me wich injectors, ic, bov and WG you use? thanks

[abbass92]

thats really impressive!

what liter engine is it?

and could you tell me alllllll the mods you did??

thankyou! :D

I wanna know because I have the same car, and atm, I got 120 brave horses in it! ;)

[bishopvideo]

@abbass92

It is only a 1396cc D14a8 engine. Absolutely default. I have done an ecu swap from a D16z6. I was a serious wiring work... So I chipped it, tuned it, and use it on LOW boost. The car put 142 whp @ 0,6 bar.  On the street i used only at lower boost values.

[manasel]

i see that the car runs smooth ,no detonations etc,who made you the soft?thanx

[bishopvideo]

@manasel

It was me! I made the whole thing...

[pipike150]

Nagyon szépen megy a hondád igaz csak 1.4 es de nagyon komoly! Grat hozzá!

[jamezzzzzz1986]

have you just put a turbo on a standard engine where have you connected the oil feed pipe for the turbo and the return. sounds very interesting i would of thought you need to change pistons rods an all that crap

[SpirtualSuzie]

im surprized engine is stock because there is more to it then bolton a turbo.for a start the compression would not be right for a turbo

[hondanickx]

The compression of that stock engine is allready on the low side , 9.1 :1 to be exact.Some aftermarket turbo pistons give you 9.0 :1 compression so it aint bad to start with. ;-)

[hondadrag]

csak egy 1.4 es honda ;)

[hondanickx]

So you made around 160hp at the crank right?Did you ever have any problems with the rods or something?I'm trying to figure out what the stock rods can handle (safe).I was hoping 160 hp to the crank.

[bishopvideo]

It has 170Hp on the crank, I heard that, this stock engine can handle 180-200Hp.  I never wanted to try it, because i now two other D14 civics and thay are blown...

[simpson3100]

Where do u get this turbo from and can u literally bolt it straight on?

[bishopvideo]

It's a K03 turbo from audi (or seat leon) 1.8 T.

The heater was made for this setup. So If u can weld (or know a man who can do it for U) this isn't a difficult job to built it.

[Membership1001]

Csak lightosan...

[kriskellas]

This is quality totally inspired me to go ahead with doing mine!

[SKYLINE5555]

I have the same honda with the same engine,and i like yours very much.How many hp does it have?

[bishopvideo]

With the stock D14 engine on boost (0,6 Bar) it made 142 Whp. But it coud be better.

I didn't want to hurt the engine, so i built a stronger D16...

[hondanickx]

Another question did you used the stock transmission and axles?Also how high where your reving Stock rev limit 7000rpm? or higher or lower ?grtz