1033 RWHP

[Floordford]

I love watching these high horsepower videos. Then thinking of those morons that cant strap 300 horsepower to a dyno without loosing traction on the barrels. Then bragging about it.

[bzoomer]

lol..Dumbest things on wheels...

[1jetzfan]

WOW!!

[MrV3lmu]

Dear santa...

[R8Tr0RaM0s916]

i bet it heat up after a few runs

[bzoomer]

The motor did not get too hot and it colled pretty quick between rounds. The big battle was trans temps. We have a blower for the converter for between rounds.

[need2speed94]

what size turbo?

[bzoomer]

88mm Precision Turbo

[MrDirtyslu]

If i were riding in it i'd be like........YEEEEWWW HAAAWWW lol. that thing is AMMMMMAAAAZAZAZAZAZING!!! Love the fox man

[killer807ownz]

so.. thats what a 1000hp sounds like, that last mustang vid i watched said 1000hp and he was barley spinning tires lol

[jaemustang89]

lilsten to that turbo scream

[JMoore4291]

1000HP is so much more than 999

[bzoomer]

More is always good! :-)

[bzoomer]

LOL

[Dizzles]

dammit... now i dont want just any mustang..... I want THAT ONE lol

[TheLaneyzf]

hey whats the advantage of not using a blowoff vave?

[bzoomer]

None, other than it was one less expense.

[04gtstang]

@bzoomer Um, if you do not use a blow off valve, you will send the compressor into compressor surge as the air stalls around the blades and start putting cracks into the impeller blade. Anything over 6PSI is a must or you are reducing life of the bearings and compressor wheel...

[bzoomer]

True.....That would be a large concern if this was driven on the street but it is just a drag car. And we had as much as 25+ lbs of boost.

[TheMean93]

@TheLaneyzf there is no advantage ..haha!! it's insurance if you don't have " blow off valve" you will blow that engine to hell,you see it release's pressure....

[rompn4x]

Nice!



[racer34aa]

this exactly why i think a bugati is waaay over priced. v8 and more hp. with the same kind of money you can build dozens of these cars. awsome job on job!!!

[91trxryder]

now thats a bov! lol

[bobbybob3680]

whats that orange light coming on inside when he is almost all the way maxed out

[bzoomer]

The Shift light. It was set at 7200 and we would go throught the traps at about 7400 to 7600.

[bobbybob3680]

@bzoomer damn thats awesome >:D

[TheMechanicalchaos]

@bobbybob3680 DEEE DEE DEEE A SHIFT LIGHT DUR!!! LMAO ROFL

[letterpool]

@bobbybob3680 that would be the devil himself grinning ear to fucking ear!!!

[33Markeith]

dadz mustang

[bzoomer]

Nope..A friend of mine and his dad own this and I just get to be the driver, wrench, co engineer and gofer...lol.

[lilmarv08]

@bzoomer lol i would love to be a gofer,wrench and driver for this lol

[slostang89]

Is that compressor surge when the blow off valve is opening?

[bzoomer]

NO blowoff valve, compressor surge. That ait has to go somewhere when the throttle is shut.

[johnboyp92]

@bzoomer just put a wastgate it wouldbe better

[Chriskawi34]

bi or single turbo?

[bzoomer]

Single 88mm Precision Turbo

[84buckstar]

Bowties be scared!

[jrockdaman2]

u aint getting no races with that damn thing a man would have to b stupid as monkey to sitdown with your ass

[toughguyv]

wow man great work!

[SpaceCookie69]

its beautiful

[supersmrf]

what does that thing do in a 1/4 mile?

[bzoomer]

8.31 @ 168

[thaandiesel]

@bzoomer craziness, nice build!!!

[ripetomatoes]

cool and everything, but what's the use of high power cars like this?

[joey053187]

@ripetomatoes i hope this comment was a joke

[ripetomatoes]

@joey053187 it kinda is a joke, but kindof not. i mean, the only time you can really use this without cops or whatever jumping on your ass is on a drag strip/race track....

[joey053187]

@ripetomatoes IT IS A RACE CAR R U SERIOUS?

[ripetomatoes]

@joey053187 no. lol i just want to see how many people will freak out over what i post! rofl

[brown05046]

that sounds so smooth when revving got-dam! is that thing gotta dohc mod in it?? if not thats how you build a ohv motor!!!

[bzoomer]

Just an old Cleveland base motor.

[bradlyw420]

@bzoomer better than a windsor

[TheCharlesmonroe]

Dude, Boner!

[macbook5000]

hell naww that thats not on pump gas !

[bzoomer]

nope..VP C-16

[KaptainAmerika1]

whats your cubic inches

[bzoomer]

352 ci

[MotelCambodia]

is it stock?

[bzoomer]

@MotelCambodia No,... It is 90% Ford parts.

[NiteRyda88]

damn listen to that sexy ass butterfly flap its wings after each pull, gotta love it

[nimblezx9]

I was wondering can you put a twin turbo or single on a 10.5 to 1 motor.. I just built a 408. I was planning to shoot it but i just think turbos might be alittle easier on it.. what do you think?????

[bzoomer]

2 small with a little boost might do the trick. Too much boost and timing can make just as many broken parts as too much shot. do your homework

[mustangtomiata]

Boosting a 10.5:1 compression motor isn't the best idea.

[sokkford]

@mustangtomiata depends on wich fuel your runnin :)

[ALXxpress]

Tune the car on E85 or make it a Alcohol car, but you probably would be better off just killing compression to about 9:1 or so. Anything is possible.

[xImEdGe24x]

might be a stupid question, but is it street legal?

[bzoomer]

Yes, other than no windshield wipers.

[XzEr0xPoSuReX]

thats just plain sick!!!

[NissanTy]

i remember horsepower tv built a twn turbo 347 stroker using a hellion kit and they got around 950 on pump gas and like 1100 with race fuel.

[bzoomer]

VP C-16 here

[Bigswole408]

Theyre probably aware of the comp surge, but im sure they know what their doing lol. If not their stang would be no where near 1,000hp

[GaHVino]

very nice

[urdaddy4321]

You need a bigger BOV on there.

That wooshing sound on throttle let up is

compressor surge

Compressor Surge = Bad

[bzoomer]

What BOV? there is not one on it.

[moregoodlier]

Just sick....nice job! Who's headers are you running?

[bzoomer]

home built

[allroundpower]

A pair of Procharger Red BOV's shoud do it!!!

[marshie1337]

what is that blow off from under the car when he backs off the gas? the turbo?

[bzoomer]

Just very rich exhaust.

[zxcvbnm177]

nice

how much psi?

pump or race gas?

[ShadowReaper1967]

was that a turbo or was it a procharger???

[bzoomer]

7800

[bzoomer]

88mm precision turbo

[ChromedOutDubs]

What RPMs are you turning that beast to?

[bzoomer]

Speedworld in AZ

[86T66T123]

was that at radical racing in atco nj

[mmarmash]

ok now ur just fuckin around eh! lol

[BIGRIG147]

HOLY SURGE!!! LOVE IT MAN!!!

[STiTypeUK]

for reeeeal! add another BOV in line with ur current one.. ur not venting all ur boost.. holy crap! sounds like ur turbo is crying.

[kraden18]

What did that entire engine cost you to build roughly? 5.0 block?

[aqualung6000]

i love the light and fast foxbodies

[bzoomer]

and a top fuel wing...lol

[bzoomer]

88mm precision

[fordboy111591]

wat turbo you runnin

[evabobevaya]

That is the shit. Hell yeah.

[bzoomer]

7800 RPM

[Shifterkartsforlyfe]

Damn! whats that thing rev to?

[blown349]

absolutely nasty! See my coupe, (just a street one)

[OuchMyGlands666]

Eats rice for breakfast, lunch and a sensible dinner.

[bzoomer]

lol

[starr101010]

what does it run on the 1/4 mile

[bzoomer]

8.31 168 There is a video posted of that as well

[albee26]

HELL YEA!!!!!!

[91slownotch]

Very, very nice! Love it!

[o56kid]

No more hearing for any of thw guys in that shop!

[Mason670]

thats wut u call rice burner uper lol nice stang now lets see them dumb rice burners cetch that!

[bzoomer]

shirt point shorter than the 1320 RPM......352ci, 4.125 bore SVO block.

[mrht07]

what size block?

[yfz162]

like the way he keeps his foot in it way past the shift light lol..

[Tigeron1a]

YEAH!!

[gameboss100]

pure horsepower baby

[jimbom347]

Whats it got? One of them K&N filters?

[bzoomer]

LOL

[Kingvideo10]

sorry god but JESUS CHRIST!!!

[marcomariaz26]

where is the dyno read out of 1033 hp???

[03blwncobra]

thats sick sounding nice work!

[superstang9698]

i wish i had the money to make my 04 cobra sound like that lol lol lol

[musclemustangboy101]

dude all u need is the hellion twin turbo setup they have for 03-04 cobras and the system bolts to ur blower so yeah it sould make same hp or more lol

look at there site to see more info dude

[c30650]

Wish I had about 500 more horsepower...haha

[marcomariaz26]

Wish I had same... LOL...

[codithsaves]

HELL YESSSS

[sykcobra]

aaaaggghhhhhh.......(relieving­ myself)

[elr2141979]

thats true v8 power

[93foxGT]

oh my god! very sweet... wish i had money like that so mine can do that

[Aalountulai]

I'm an Alabama ***** and I wanna be free.... Hohoho

[cetariumdrummer]

i got a boner from this vid

[XenigmaX2426]

fuck a supra this car is the shit

[supermanaaron]

i bet you a guy in a mk4 supra gets more pussy off it then a fag in this ugly ford

[hollowpoint27]

if you need your car as your primary source of pussy, i think you really need to be investing your money in sources.

[Itbreaths]

AHAHAHAHAHAHAhA. That was epic ownage.

[metalrayne1]

Hahahaha....

[Maxmaj1q]

nicely done

[halo491]

@hollowpoint27 dude that car is going to get pussy...no matter what haha

[americanwarrior81]

doesn't pop like a rice popper.

[bzboarder17]

You have about twice as much HP than my fox...I can't even imagine lol. Nice car man. Any time slips?

[pusher1012000]

wow insane really i wanna get a fast car like that one day

[rfelix7]

Nice you guys sold My friend a mustang built by you guys(AMP performance. was a 97 or 98 i believe ,white, procharged ,one off wheels, etc.. Runing in the 11s..

Thing is a fuckin beast. Nice work.

[Lucarex14]

how much cost?

[bzoomer]

the last set of upgrades was about 15K..turbo, ecu, re-plumbing, re-wiring..etc etc

[hjjfffaa]

how much boost?

[bzoomer]

26lbs

[Xarmy187]

i found the BOV 0,0

[big88foxbodyfan]

damn man what all did you do to it, i got me a 88 gt stang and i'm just wanting to put 500 to the rear wheels, any suggestions of what all i could do? i'm also wanting to keep it in a 302 range, although i may poke it out to be a 305

[bzoomer]

351 ci SVO. C302B heads ported. Edelbrock intake ported and injector bungs installed. ^50 lift roller cam. 88mm turbo...There is alot you can do. It all depends on what you want to do and how large your wallet is. Call and talk to Chris at AMP performance in Phoenix AZ.

[marktalley]

@big88foxbodyfan 306

[frankenstein01]

It's almost like it's laughing at you.

[schroedercasey2001]

U still have the car?, Done anything with it lately?

[bzoomer]

Yes, still have the car. Short block is complete now I am waiting for the AZ temps to cool off. Need to update the cage next. We were hoping to be out again this fall but that will probably be delayed.

[stangtattoo]

Man you could blow dry your laundry with that blow back ,SWEET!

[bzoomer]

too much...lol...If you had to pay someone to build it all from scratch, probably 40-60K.

[weggy123]

ROFL!!!!!!!!!!!!!! Turbo surge! That is SO sick..on average how much does it take to put a car like that together? Seriously..

[turbosuperiority]

That sounds incredible!  Nicely done

[bzoomer]

26 to 28 lbs

[T04E]

Got turbo surge? lol that is awesome, how much boost?

[bzoomer]

No blow off. What you hear is the air coming back out of the turbo. There will be a blow off next time around.

[supedstang]

wow, that is freakin sweet. i like the blowoff.

[saw426]

Jesus !

[mustangmatt46]

awesome ride... what have you got for a bottom end in it?

[bzoomer]

SVO block with a girdle, Crower Crank and Bill Miller Rods. The new short block will have Dart Block and MBR billet rods.

[grindking10000]

what size rims and tires are you running? Did you have to mini tub it to make them fit? Awesome ride man. Cant beat the sound of a spooling V8.

[bzoomer]

13x31 M/T ET Streets, 12" wheels..and tubbed.. Hope to be out again this fall.

[Giftied]

no way really? thats fucking amzing is a ford motor?

[bzoomer]

Ford motor - SVO block and C302B heads. 88mm turbo and EFI ...The new motor will be using a dart block.

[Giftied]

what size enginge

[bzoomer]

352ci