Around 5:46 I noticed an a silver adapter piece thats used to screw on, my puller kit didn't come with it, what is the name of this piece? I need to run to the hardware store
For those who just want to pull the battery cables, if you have a used Saturn like I do and don't know it's history you look to run into problems with your stock stereo as soon as you cut the power. If somebody put in an anti theft code and you don't know what it is you end up with a stereo in lock down, meaning without the reset code, no stereo. Possibly a code wasn't programmed in but why take the chance?
Easy as pie Changed out my Ignition switch using this and 2 other of your videos. I also changed my Steering wheel as the one from the JY where I got the ignition switch was better,. Thanks rich for the videos!
@TMattLee I couldn't just wiggle it out it was too tight so i had to rent a steering wheel puller but thats about it. My truck was a 77 Ford so I didn't have to mess with any wires just the horn.
To everyone wanting to know whether you should take the fuse out or disconnect the battery instead when dealing with the airbag. Think about this for a second, you are dealing with an explosive device that if it goes off can do some serious damage to you. Don't take chances. I removed both the battery cable and fuse. Then I let it sit overnight.
when replacing the steering wheel back in and the fuse and not replacing the airbag, will there be any problems turning the car on and driving without the airbag attached ?
okay I am doing a project on a 97 s series with the steering wheel, can I replace the steering wheel and leave off the airbag and place the fuse back in?
What The Fuck?!?!? You Dont Need all those fancy tools like the torque wrench or the ''puller'' and you can just unhook the battery cables no need to take out the fuse Jackass your just making things sound complicated
@CharlieLUVSChevys there is still a charge in the ECU, so if you do it that way, you would need to sit on the brake pedal for about 3 minutes to discharge the ecu making it safe.
@CharlieLUVSChevys When did he use a torque wrench? The puller is to remove the wheel because it's press fitted to the column. And I think he took the fuse out to avoid risk of electrocution! If you think it's so easy then why are you watching this tutorial?
i have a quik queston i have a 91 honda accord, is it the same but with out the whole airbag thing because mine dont have 1 and i want to but a racing steering wheel on?
@anthonysakai an accord is not a race car therefore you should not put that wheel on and please remove the fart cannon and/or wing that i predict you have put on.
@Jadoogarr actually the airbags have capacitors hooked up to them and will store a certain amount of energy, your better off unclipping the harness' to each airbag then wait for the caps to discharge.
pepboys has a descent Kawasaki 1/2 Corded impact for like 65 bucks, it is corded(standard outlet) and has enough power for the DIY and get a set of 1/2 impact sockets
Awesome video, you have helped me a-lot. Do you know if i were to replace my steering wheel with another one that doesn't have an airbag, can i leave the airbag fuse out.
Fantastic demonstration, nice clear view and verbal instructions. When putting the steering wheel back on, do you have to use a lot of pushing force to set it back in?
luv the vids richpin! would u consider doing a video that shows how to remove the paneling and headliner in a gen 2 so that we can replace that ourselves? i helped my sister with hers but noticed that gen 1 panelling is diff/easier than the gen 2. thanx!
Around 5:46 I noticed an a silver adapter piece thats used to screw on, my puller kit didn't come with it, what is the name of this piece? I need to run to the hardware store
Skittlesking 20 hours ago
@Skittlesking Are you talking about the piece with the four long slots and large bolt in the middle.
richpin06a 19 hours ago
@richpin06a
No thats the yoke, I have that, I mean at the end of the long part that screws into the steering wheel
Skittlesking 18 hours ago
@Skittlesking That was part of the puller i doubt it is something you could pick up separately.
richpin06a 18 hours ago
@richpin06a
Damn alright thanks, guess I have to buy a new puller. Thank you for the video, I subbed.
Skittlesking 16 hours ago
I would recommend disconnecting the batterie also unless you like having a broken neck and possibly death. If you like your chances then have fun.
mikefknjohnson19 3 weeks ago
sounds like peter griffin :D
janMirage98 1 month ago 6
@janMirage98 what what what
richpin06a 1 month ago
For those who just want to pull the battery cables, if you have a used Saturn like I do and don't know it's history you look to run into problems with your stock stereo as soon as you cut the power. If somebody put in an anti theft code and you don't know what it is you end up with a stereo in lock down, meaning without the reset code, no stereo. Possibly a code wasn't programmed in but why take the chance?
guitarbrian46 2 months ago in playlist Saturn
great video, i thing its much simpler and safer to disconnet the battery than the fuse !!!!!!!
LoriderTA 2 months ago
just take the wheel off lol
LOLatmeade 4 months ago
you can remove my steering wheel anytime!!!
erikshead 4 months ago
Easy as pie Changed out my Ignition switch using this and 2 other of your videos. I also changed my Steering wheel as the one from the JY where I got the ignition switch was better,. Thanks rich for the videos!
charlietrain 5 months ago
very productive
Notchism88 5 months ago
life saver thanks man
nik5646 6 months ago
great video
bluntman99999 10 months ago
but its always smart to wear gloves because of static electricity.
MileyCyrus192 11 months ago
Do you need a steering wheel puller? I cant take off the wheel by hand is there another way?
Antonio865 1 year ago
@Antonio865 Yes you can use a steering wheel puller.On the 00-02 you will need adapters with the puller.
richpin06a 1 year ago
@Antonio865
Wiggle the wheel left and right as you pull. Simply pulling won't work.
TMattLee 9 months ago
@TMattLee I couldn't just wiggle it out it was too tight so i had to rent a steering wheel puller but thats about it. My truck was a 77 Ford so I didn't have to mess with any wires just the horn.
Antonio865 9 months ago
were you takin it off to put a aftermarket wheel on or do they make them for saturns?
uhsdef78 1 year ago
@uhsdef78 I took it off just to show you how.
richpin06a 1 year ago
so i removed an airbag on a sable without removing the fuse or battery cable, u telling me the airbag could have blown up in my face!!
Siciliana81 1 year ago
@Siciliana81 yes! and unhooking the battery dosent always cut it as airbags store a little juice in capacitors
blazinloud 1 year ago
You sound like Peter Griffin from the Family guy!! =)
mercjay 1 year ago
THANKS!! DO A VIDEO ON A FORD FIESTA MK5 :D
mike060187 1 year ago
To everyone wanting to know whether you should take the fuse out or disconnect the battery instead when dealing with the airbag. Think about this for a second, you are dealing with an explosive device that if it goes off can do some serious damage to you. Don't take chances. I removed both the battery cable and fuse. Then I let it sit overnight.
ajy2002 1 year ago 2
78 MGB, no holes?
dagger350ify 1 year ago
His hands are too slow. Can't work without gloves?
OhNoPaypal 1 year ago
OK
thanks
14shawn 1 year ago
can u do a video on a gen 3 Saturn 01
14shawn 1 year ago
@14shawn Yes i do have on on the gen 3
richpin06a 1 year ago
when replacing the steering wheel back in and the fuse and not replacing the airbag, will there be any problems turning the car on and driving without the airbag attached ?
lonewolfncubs 1 year ago
@lonewolfncubs I believe the only thing that will happen is the service soon light will come on.
richpin06a 1 year ago
okay I am doing a project on a 97 s series with the steering wheel, can I replace the steering wheel and leave off the airbag and place the fuse back in?
lonewolfncubs 1 year ago
can u do a video for 1998-2000 corolla?
pker799 1 year ago
@pker799 If i find myself working on one i will be sure to video the removal.
richpin06a 1 year ago
instead of taking out the fuse can you (as an alternative) disconnet the battery?
nolifeATALL23 1 year ago
@nolifeATALL23 Yes you can but be warned you will lose your presets on your radio
and the computer will have to relearn and set its readiness tests like our fellow who flamed me below probable found out
richpin06a 1 year ago
What The Fuck?!?!? You Dont Need all those fancy tools like the torque wrench or the ''puller'' and you can just unhook the battery cables no need to take out the fuse Jackass your just making things sound complicated
CharlieLUVSChevys 1 year ago 5
@CharlieLUVSChevys I think that ther could be down-sides of that meathod...
nejustinas32 1 year ago
@CharlieLUVSChevys there is still a charge in the ECU, so if you do it that way, you would need to sit on the brake pedal for about 3 minutes to discharge the ecu making it safe.
awcviper1 10 months ago 2
@CharlieLUVSChevys When did he use a torque wrench? The puller is to remove the wheel because it's press fitted to the column. And I think he took the fuse out to avoid risk of electrocution! If you think it's so easy then why are you watching this tutorial?
92Phaywood 5 days ago
i have a quik queston i have a 91 honda accord, is it the same but with out the whole airbag thing because mine dont have 1 and i want to but a racing steering wheel on?
anthonysakai 2 years ago
@anthonysakai an accord is not a race car therefore you should not put that wheel on and please remove the fart cannon and/or wing that i predict you have put on.
Devastator771 2 years ago
i dnt put that shitty ass shit on there i just cut the muffler and cadilac conv. off and i hate wings and them muffler cans nvr wnt one
anthonysakai 2 years ago
Easier way!
1. Take NEGATIVE terminal of battery out.
2. Go ahead take off the airbag.
NO NEED TO LOCATE THE FUSE AND WAIT 30 MINUTES.
Jadoogarr 2 years ago 5
@Jadoogarr actually the airbags have capacitors hooked up to them and will store a certain amount of energy, your better off unclipping the harness' to each airbag then wait for the caps to discharge.
blazinloud 1 year ago
Good video. Its funnny at around 2:00 you can hear his voice is diffrent because he wearing a helmet just incase the airbag goes off
hasnain23 2 years ago
AHH looks hard :( does the same go for a Honda Civic 98' i wanna change my wheel so bad!
Cyrex5555 2 years ago
OMG NOT FAIR!! I NEED A TORQUE WRENCH?!?1 fuck im screwed. the hub nut is SO FUKING HARD to get off of the steering wheel with a socket wrench
kbtwinkietwins 2 years ago
pepboys has a descent Kawasaki 1/2 Corded impact for like 65 bucks, it is corded(standard outlet) and has enough power for the DIY and get a set of 1/2 impact sockets
lovemym16 2 years ago
lol I've used your video for almost everything I've had to do on my 99 Saturn sc1. Thanks for making these series of repair videos.
Keishemai 2 years ago
this guy is fucking awesome!
eadad 2 years ago
Awesome video, you have helped me a-lot. Do you know if i were to replace my steering wheel with another one that doesn't have an airbag, can i leave the airbag fuse out.
94SuPraGuY 2 years ago
You can leave the air bag fuse out but the air bag light will come on.
richpin06a 2 years ago
But if I put the fuse back in the light should go back off, even though there is no airbag?
94SuPraGuY 2 years ago
Fantastic demonstration, nice clear view and verbal instructions. When putting the steering wheel back on, do you have to use a lot of pushing force to set it back in?
cyberexposure 2 years ago
No you don't have to use much force at all.
richpin06a 2 years ago
luv the vids richpin! would u consider doing a video that shows how to remove the paneling and headliner in a gen 2 so that we can replace that ourselves? i helped my sister with hers but noticed that gen 1 panelling is diff/easier than the gen 2. thanx!
uncoverbrother 2 years ago
great video! thanks!
allanfarrell 2 years ago
thanks for this high quality video. I always watch your clips when I have a rest
xybaby 2 years ago