@lfrigoli Far from hard to drive with 2.76 gears. Try launching the car once when the temp is above 70 and it'll only chirp a few times. You just get the car?
Nope Had the car for a while, just been doing tune up items, like playing with heat ranges on plugs, changing all sensors, some porting, honing, all the usual suspects to help make more power.
@lfrigoli Yeah i gave up on mine and got a 88 Mustang. That car needs a lot of mods that aren't available like a decent trans and rear gears. The ZF trans thats in the car is only rated for a max of 480lb/ft of torque
@FoMoCo4ever That would be a false statement, straight out of the build book for the ZF 6HP26 the input shaft will hold 600 Ft/lb peaking at 700 Ft/Lb. So its pretty safe to say these trannys are solid for the common user.
If you need to build more power Im sure Level10 will shotpeen and Cyro the input shaft to take more power.
Starting at 20 mph, nailing it...to 60 mph was pretty darn quick. That's a 2nd to 3rd shift I presume? Definitely more blower whine...air is def. sucked in faster.
lol funny 20-60 in under 1 second and one gear.
FUCK202 7 months ago
Bullshit
FoMoCo4ever 11 months ago
@FoMoCo4ever How? explain to me how its bullshit?
lfrigoli 11 months ago
@lfrigoli 20-60 in 1 second LoL
Must of been a nice rainy day cause them cars can't spin tires that much from a dig
FoMoCo4ever 11 months ago
@FoMoCo4ever
hahahaha your funny, did you see my DSC is off? Its very hard to drive with DSC on since its constantly gripping the brakes and pulling timming.
lfrigoli 11 months ago
@lfrigoli Far from hard to drive with 2.76 gears. Try launching the car once when the temp is above 70 and it'll only chirp a few times. You just get the car?
FoMoCo4ever 11 months ago
@FoMoCo4ever
Nope Had the car for a while, just been doing tune up items, like playing with heat ranges on plugs, changing all sensors, some porting, honing, all the usual suspects to help make more power.
lfrigoli 11 months ago
@lfrigoli Yeah i gave up on mine and got a 88 Mustang. That car needs a lot of mods that aren't available like a decent trans and rear gears. The ZF trans thats in the car is only rated for a max of 480lb/ft of torque
FoMoCo4ever 11 months ago
@FoMoCo4ever That would be a false statement, straight out of the build book for the ZF 6HP26 the input shaft will hold 600 Ft/lb peaking at 700 Ft/Lb. So its pretty safe to say these trannys are solid for the common user.
If you need to build more power Im sure Level10 will shotpeen and Cyro the input shaft to take more power.
lfrigoli 11 months ago
@lfrigoli I just seen on wikipedia it's rated for 443ft/lb. I figured that was pretty accurate considering i broke mine after 33k miles lol
FoMoCo4ever 11 months ago
@FoMoCo4ever Cant always rely on wiki, this was straight out of the FSM. I don't think ZF would put false numbers
lfrigoli 11 months ago
Starting at 20 mph, nailing it...to 60 mph was pretty darn quick. That's a 2nd to 3rd shift I presume? Definitely more blower whine...air is def. sucked in faster.
chiropractic47 11 months ago
@chiropractic47
That was 2nd to 3rd.
Its utterly usless to stab the throttle from a dead stop all it will do is eat the big fat tires.
lfrigoli 11 months ago