Hi. A few months ago I bought and replaced my iphone's digitazer. It worked ok, then the LCD went gray, I thought it was a matter of replacing it aswell sou I did that. Problem is the new one also appears gray all the time. What should I do now. Please help!
Hi, if this process becomes to complex or you need other repairs such as Lcd, Battery, Headphone Jack, Home Button/Power Button, etc. Please visit my Site! We will be more than happy to fix your iPhone or iPod Touch any gen. wix.com/iRepairit/iRepair
ok this must be a different iphone 3g because it looks nothing like mine on the inside. I just need to replace the screen because i dropped my phone while at a bar. derrr. I've got most of it taken apart. The only thing is, I can't seem to get the screen apart from the frame where the home button is. I've looked for screws or a release of some sort and can't seem to find it. Does this thing come apart any further?, and if so, how? Hope someone can help.
STOP this is how to wreck your iphone. All u need to do to replace the lcd is remove the 2 screws and carefully lift the glass from the home button end with a sucker (or a blob of epoxy if the screen is cracked). Disconnect 3 ribbon cables, remove 6 tiny screws from metal frame on screen, pull sides of outer main frame away from sides of inner lcd frame to SIMPLY release lcd...do not use a tool to try levering the lcd you will break it. Heat glass with hairdryer for +5mins. Easy!
ok, so i broke my lcd screen while replacing the glass and digitizer on my iphone 3g, i ordered a new one, but i dont think it comes with that metal backplate, do i have to order a seperate one, or is there a way to remove the old one from the orignal lcd?
there's just 2 side strips of adhesive holding the screen to the blackplate. Remove and reuse backplate...new screen should have the strips (they are only 1mm wide). Cable end of lcd is same end as backplate tabs...line up the projections on the lcd with the holes in the backplate.
Plz can u help me my dock button touch screen is not working rest of the screen touch is working properly but when i connect it to my charger then dock button touch screen works.Can u tell me what is the fault n what should i do plz help meeeee.
follow the video to disassemble and then bath the board in 90 percent alcohol... That should get of any imperfections that could cause the board to not work.
Good luck!
Let it try for 12 hours before you attempt use after you bath the board in alcohol.
I've watched half a dozen iPhone repair videos, and this is, by far, the best!
outlandishmanta 3 months ago in playlist iphone repair 2011
nobody actually Likes bon jovi dude....
duecify 6 months ago
Go to your address bar, after the word YOU and before the word TUBE, type in "win" then press enter
MrMcclovinit 11 months ago
Hi. A few months ago I bought and replaced my iphone's digitazer. It worked ok, then the LCD went gray, I thought it was a matter of replacing it aswell sou I did that. Problem is the new one also appears gray all the time. What should I do now. Please help!
daedaarstad 11 months ago
Why WOULDNT I feel free to put pause anytime I want, tell me?
mauridaherg 1 year ago
my tray broke into half one part of it went in side the card reader HELP ME ASAP
khaliq100 1 year ago
nice song.
JOHNBASS117111 1 year ago
how long does this take
brokenxpieces 1 year ago
CHEAP replacement parts at repairtechie(DOT)com
repairtechie 1 year ago
New Iphone4 burned + dropped 20 stories watch?v=Pg0NSpTu-24
IMAproductionz 1 year ago
This has been flagged as spam show
Hi, if this process becomes to complex or you need other repairs such as Lcd, Battery, Headphone Jack, Home Button/Power Button, etc. Please visit my Site! We will be more than happy to fix your iPhone or iPod Touch any gen. wix.com/iRepairit/iRepair
NOW WE ARE SELLING iPHONES AND IPOD TOUCHES
iRepair4 1 year ago
This is dumb. He did it backwards, you can just take the screen off and replace it rather than taking the whole phone apart to get to the screen.
fbxcore 1 year ago 2
@fbxcore Agreed, while this is required for the iPhone 4 it is not at all necessary with the 3G/3GS
psilokan 10 months ago
fantastic clip
bhaviksp1 1 year ago
Bon Jovi baby!
IINutzernameII 1 year ago
lol he told us how to take it apart, but not to put it back together.
poe526 1 year ago
wooooo bon jovii
pollitods 1 year ago
ok this must be a different iphone 3g because it looks nothing like mine on the inside. I just need to replace the screen because i dropped my phone while at a bar. derrr. I've got most of it taken apart. The only thing is, I can't seem to get the screen apart from the frame where the home button is. I've looked for screws or a release of some sort and can't seem to find it. Does this thing come apart any further?, and if so, how? Hope someone can help.
boomboom3000 2 years ago
This has been flagged as spam show
@boomboom3000 Check out this video:
/watch?v=lsFTlVTSeIA&feature=related
gutozao 2 years ago
@boomboom3000 theres adhesive sticking the two together, you gotta heat it up with a hairdryer
noholo1 2 years ago
Comment removed
winston0024 2 years ago
STOP this is how to wreck your iphone. All u need to do to replace the lcd is remove the 2 screws and carefully lift the glass from the home button end with a sucker (or a blob of epoxy if the screen is cracked). Disconnect 3 ribbon cables, remove 6 tiny screws from metal frame on screen, pull sides of outer main frame away from sides of inner lcd frame to SIMPLY release lcd...do not use a tool to try levering the lcd you will break it. Heat glass with hairdryer for +5mins. Easy!
stressticles 2 years ago
ok, so i broke my lcd screen while replacing the glass and digitizer on my iphone 3g, i ordered a new one, but i dont think it comes with that metal backplate, do i have to order a seperate one, or is there a way to remove the old one from the orignal lcd?
kwick818 2 years ago
there's just 2 side strips of adhesive holding the screen to the blackplate. Remove and reuse backplate...new screen should have the strips (they are only 1mm wide). Cable end of lcd is same end as backplate tabs...line up the projections on the lcd with the holes in the backplate.
stressticles 2 years ago
Plz can u help me my dock button touch screen is not working rest of the screen touch is working properly but when i connect it to my charger then dock button touch screen works.Can u tell me what is the fault n what should i do plz help meeeee.
dexterlalu 2 years ago
But the phone has water damage does it still work if the phone has water damage?
cornbread5151 2 years ago
can i buy your water damaged iphone 3g
nissanlambo 2 years ago
how do u fix a water damaged iphone 3g
cornbread5151 2 years ago
follow the video to disassemble and then bath the board in 90 percent alcohol... That should get of any imperfections that could cause the board to not work.
Good luck!
Let it try for 12 hours before you attempt use after you bath the board in alcohol.
phxdrummer16 2 years ago
If you are gentle and follow the instructions, you will not break your device.
TechtronicsDotCom 2 years ago
im to scared yo break it
nba7172737475 2 years ago