Do this in the bathroom: Heat up the bathroom with water from your sink for the dust to get away from the air, wait 5 minutes. Clean your device with a LCD-cleaning kit and get away any extra dust by simply putting a layer of tape on your LCD and remove it. Read ZAGG's instructions carefully, then when you're going to apply the shield, put it at the bottom of your device, use the squeegee and slightly tilt the shield back against it and push the squeegee forward to apply it. No bubbles. :)
I bought this invisibleSHIELD for my ZTE Blade a few days ago (at the same time I purchased the mobilephone) and just earlier today I opened the box for my ZTE Blade and picked it up, battery wasn't pre-installed so I installed the invisibleSHIELD right away, no fingerprints and a totally new phone. I did however watch a few videos before installing and reading the installation guide thoroughly and I got a almost perfect install, maybe 1mm too far to the right but no bubbles whatsoever. Perfect.
This "shield" is piece of crap. I've had to buy 3 times the shield.
This third time I nearly threw the phone to the wall and ripped the shield since IT IS IMPOSSIBLE TO FIND A PLACE WITHOUT DUST!!
You'd had to be in a freaking operatin room!! Now this thid shield has some dust in it and I've tried 4 times to get it off!! No success! thank you for wasting my money!!!
I don't get it why does he spray the screen and the sticky part of the shield won't that damage the phone? I know he used the squeegee but after the shield is on completly won't some of the liquid still be there and eventually damage the screen?
I really don't like these cases, it always looked flimsy to me. But just now my older brother asked me to put it on his Droid Charge.(I'm good at perfection) To be honest the install was super easy took like 10 seconds to get it on perfect without bubbles too. You have to kind of stretch it on to fit the whole screen though, and they don't give you enough of the spray to put on the full shield for back and front. I don't really like the feel of the protector but thats just me. I like it smoother
This is BULLSHIT! the product is supposedly good and the material from which it is made also feels ok i guess, but i came up with a conclusion that you have to be super pro at this, it does look very easy, i agree! but its waaaayyy easier to FUCK it up! you try again and again, and then some dirt comes beneath the shield, which you can't make go away, and ultimately u get so fucking pissed for spending over 25$ for it, i dont really recommend, try other alternatives
@santaahobo actually i am very well aware of that, but it doesn't matter at all! it has already failed as a product, and a lifetime warranty doesn't necessarily make a specific product worth buying, for me it is just a way to tempt people and convince them to buy it. i hope they will come up with something else that will prove itself in a better way and will be actually simple and useful as much as people would expect from something like that to be..
Big problem, i bought it, less than a week, edges starting to peel off. Went back, they repair, after a week, peel off again, even worse. Went back second time, they said, adhesive already gone, they cant repair. FAIL!!! Wasted my money
Gadget Filmz is 50,000 times easier to install and has a life time replacement even if you mess it up while installing it! they also have this carbon fiber that looks amazing! love my iphone now.
I just installed this on my phone (I only bought the front piece) it's really not too hard to install, but yes, you are spraying liquid onto the phone. The important thing to remember is that you should be focusing on the glass. Don't drench it and it will be fine.
I have this on my x10 mini, it functions very well and is barely noticeable but it makes the grip suck especially when its warm outside and your hands are sweaty, that combined with the small size of the phone makes me drop it all the fucking time lol
I just got this today on amazon.com for $15 and it was easy to put on I think everyone should have one of these I'd you have an iPod touch it is worth the $15
i did this and then it looked like my ipod touch was gonna die, then my mom screamed at me because it costed like 20 dollars and i messed up my ipod touch that was like 200-300 dollars? then i hated the invisable shield... but the next day it was all clear and flawless and stuff and i was likeYAY!!!! then my mom apolagized to me :D
@313bro@eEemppUu the stuff is non-conductive, unlike water. so you could theoretically spray it directly on your internal parts and they would still work fine. I've put a few on different phones now and its really not scary. as long as you take your time and follow the instructions.
@ CoolCanadianGuy7 1st learn to read miss typed or broken text 2ndly pay me & i'll take my time 2 tex properly 3rdly no where in my instructions did it say avoid ports I don't know about wut u thinkn but this product is bullsht how the hell do u avoid ports when phones r made differantly? that dam water doesn't help the screen still sticks during process,the end result is a soked phone.
ZAGG SHOULD BE SUED FOR NOT WARNING US ABOUT THE HARMFUL EFFECTS OF THE SOLUTION A SALES PERSON AT RADIO SHACK TOLD ME IT WASN'T HARMFUL 2 PHONES NOW AFTER APLYING WITH LOTS OF SOLUTION I'M READING THIS WTF!!!
@313bro 1st learn to speak bud. 2nd Its water, avoid the ports like they CLEARLY said and let your device sit for 24 hours like they CLEARLY said also. Don't blame Zagg because you can't follow instructions, or even type properly. By the way, YOU DON'T NEED TO TYPE IN ALL CAPS TO GET PEOPLE TO READ YOUR COMMENT
this is WAY harder than it looks. I totally failed it when letting finger marks and other dust in there, couldn't get it off, i washed the shield like for 5 mins, no change :S
ordered mine from visitnow.org only 5$ and with rubber/silicon materials that can really protect your iphone from the collision with the floor, real antishock capabilites.
I use these products for utility items such as digital voltmeters and embedded controller displays. Small phones also. To put one on an ipad or droid tablet is just going to make it look like crap though. Plus it is really difficult to get the bubbles out and the squeegie will scar the surface of the film if you press to hard.
you can send your device to ZAGG (the makers of invisibleshield), for a professional install. they charg$15. i had them install my shield on my iPhone and looks perfect
Ok... So I bought this online for my Nokia 7705 Twist, it looks easy BUT ITS NOT! Didn't even come with a lint-free cloth... So my invisible sheild was COVERED IN DUST BECAUSEI DIDNT HAVE ONE. Also my phone got soaked and got inside my phone. GREAT. Awesome thing though :D
ALL these cases are like building a FORTRESS, but without the Gates.
THE DISPLAY IS STILL CONSTANTLY EXPOSED!!! Idiotic.
I guess Apple earns so much money on repairing displays they dont allow cases that protects the Display.
My brother (does heavy works with construction) got a case with carbonfiber-like material but with a cover/lid part for the Display, wich saved it (iPhnoe3G) many times over. Neither him nor i can find it in any of the stores anymore!
My installation experience was much different than this. I bought one for my EVO and followed the directions EXACTLY, even sprayed my finger tips. That god damn sticker did not slide one little bit once it touched the screen. It was like fucking super glue. After pulling the thing off probably 7 times and re-wetting it with no luck it turned into a matter of trying to just lay it down perfect cuz I knew it wasnt gonna slide. Ended up getting shit under it with my 15 minutes of manhandling. Junk
the new zagg doesnt include the spray anymore they have a new sponge which makes it even more harder to install.. idk why they stopped making the spray
Follow the damn directions and it's not THAT damn hard. Took me about 15 mins of playing with it. Don't be excessive with the damn spray, don't get frustrated when it looks like crap, cuz it takes days to look right, and don't worry about the 12 hours, I never turned my phone off once and it's fine. Impatience abound in here. I just put mine on 3 hrs ago, i'll let you know in 3 days if it turns out right.
Had the shield for over a year. I took it off though, because I got some chemicals on it and ruined the front. My iPhone screen was as good as the day I bought it. I called ZAGG and they shipped me out an entirely new set, no problems. They will even install it for free. Thumbs up to ZAGG.
This is the worst product ever! The shield was not cut for my ipod. (YES I BOUGHT THE 2g version) The headphone jack kept getting covered along with the power button AND USB connection port. The "water solution" made the shield not stick to my ipod (i even waited 1hr for drying!!) And I tried registering my product and it wouldn't let me! After all the stress i just took the shield off crumpled it and threw it AWAY. IT EVEN LEFT PERMANENT STICKY GOO STUFF ON MY IPOD!!! Great! THUMBS DOWN!!!!
@Kebbe666 the stuff is non-conductive, unlike water. so you could theoretically spray it directly on your internal parts and they would still work fine. I've put a few on different phones now and its really not scary. as long as you take your time and follow the instructions.
lol id screwed up I spayed also the iphone too and with spraying the front shield, but everything came out good at the end, they should came with 2 sheets instead of 1 sheet,
My only tip is when applying the the corners and sides is to leave them to dry for at least 10 minutes so they dry and get sticky enough, if they are still wet they will not stick. When this is done use the palming technique and your fingers and hold it till it stays. I found it a bit tricky but got it in the end ;). Only difference is in England ours comes with sponge soaked in solution instead of the spray.
@chipmonkeyharvey Strange, I bought mine from Carephone a couple of weeks ago ant there was no spray. Seriously it was only a small sealed tray with a black sponge in it, cost me £15.
i have just installed my shield onto an iphone 4. i had no problems with it. as long as you take your time then you dont get any bubbles . i would recommend it to anyone
For scratches, but remember that there isnt cases that wud protect ur ipod or iphone. If u drop it a few times you will see that the memory of the iphone and ipod touches begin to fade. So better keep your Ipod/Iphone on real safe and like a flower in your hand.
i just got the iphone 4, should be here in a week or so. anyways i got a skin fom skinit.com and i wanna put this shield on top of the skin. is it possible?
Is it safe to get the adhesive on the speaker like that? I got this and want to put it on my iPhone but can't imagine spraying adhesive either on the speaker or on the home button... Not sure what to do..
Installing was hard, their site is weird. I have weird coloring dots on my screen and a lot of bubbles on the back. Now I have to leave my iPhone alone for 24 hrs, which is a true hell for me.
@carlinecaribou They work okay. I got one awhile back and it looked nice but then the texture of it is just horrible. when you tap on things on your iphone it doesnt respond all the time, and like i said, i personally dont like the texture of it, it feels really weird. it does work though
You have a point, All the additional features are fantastic, the only thing dissapointing is that the screen is smaller.
Alot of people watchin' this video don't have the cash to afford the iPhone 4g, it's just going to cost alot
Good news, I discovered on the Apple FB Fan Page earlier they are giving away a ton of iphone 4gs. If your lazy, this is the link to Apples contest page ... just copy and paste
To everyone considering buying this. If you are mentally ill, don't buy it, cause you prolly wont be able to apply it. But with an IQ over 50 this is no problem at all, and the result is perfect. You get a few "clusters" of small bubbles, but they were gone after 10 hours. Used it for 2 days now, and no bubbles are left and no scratches. Awesome shield if you ask me.
i am so pissed off at this company. for the blackberry 85XX series they dont' have this freaking spray and i jsut screwed mine up and it looks horrible and if your hands aren't perfectly clean and you don't take off the "backing" when it DOESNT EVEN TELL YOU TO then your left with a stupid piece of sticky plastic that you crumble up, spit on, and throw out. FUCK
i am so pissed off at this company. for the blackberry 85XX series they dont' have this freaking spray and i jsut screwed mine up and it looks horrible and if your hands aren't perfectly clean and you don't take off the "backing" when it DOESNT EVEN TELL YOU TO then your left with a stupid piece of sticky plastic that you crumble up, spit on, and throw out. FUCK
@h8tenonyou i would if u have lodes and lodes of patients but when i brought one it didn't go very well and i ended up ripping it off and lobbing it out the window
dont buy this product. installing it is a bullshit. i regret getting this. i should've just watch the video and reviews first. :( just a waste of money and time.
OK, i have an old case that fits exactly to my ipod touch, instead of palming, adn I put the shield on,( im only doing the back) adn close it up in the case? will that help the corners adhere?
i think it's made of carbon nanotubes which is even harder than diamond and there for harder to scratch. Things softer than other gets scratched by harder materials. hard materials are hard to form and soft materials like water is easy to form
The invisishield was honestly quite dissapointing. I've used similar protective films in the past, they were all easier to apply, have resisted scratches better (scratches to the film) and have had smoother surfaces.
I expect to replace mine for a better looking one once I feel like wasting another $10-20.
Actually the phone wont break if you spray the shield spray onto the screen (as long as the phone is off the phone will be alright)
143ambiguity 1 week ago
why in the hell would anyone wanna buy a lifetime warranty shield for a gadget that lasts no longer than 3 years?
delkana80 1 month ago
Surly the fluid will go inside the speaker, side of screen and the home button???
simonjrope 2 months ago
Do this in the bathroom: Heat up the bathroom with water from your sink for the dust to get away from the air, wait 5 minutes. Clean your device with a LCD-cleaning kit and get away any extra dust by simply putting a layer of tape on your LCD and remove it. Read ZAGG's instructions carefully, then when you're going to apply the shield, put it at the bottom of your device, use the squeegee and slightly tilt the shield back against it and push the squeegee forward to apply it. No bubbles. :)
CrazyAngelDude 2 months ago
I bought this invisibleSHIELD for my ZTE Blade a few days ago (at the same time I purchased the mobilephone) and just earlier today I opened the box for my ZTE Blade and picked it up, battery wasn't pre-installed so I installed the invisibleSHIELD right away, no fingerprints and a totally new phone. I did however watch a few videos before installing and reading the installation guide thoroughly and I got a almost perfect install, maybe 1mm too far to the right but no bubbles whatsoever. Perfect.
CrazyAngelDude 2 months ago
This "shield" is piece of crap. I've had to buy 3 times the shield.
This third time I nearly threw the phone to the wall and ripped the shield since IT IS IMPOSSIBLE TO FIND A PLACE WITHOUT DUST!!
You'd had to be in a freaking operatin room!! Now this thid shield has some dust in it and I've tried 4 times to get it off!! No success! thank you for wasting my money!!!
Vemutin 2 months ago
We must remove the original protective film before applying the new (Invisibleshield) ??????
MrYanissss 3 months ago
I watch this for this guys voice, I find it funny
predatoronmars 4 months ago
I don't get it why does he spray the screen and the sticky part of the shield won't that damage the phone? I know he used the squeegee but after the shield is on completly won't some of the liquid still be there and eventually damage the screen?
trema12345 5 months ago
neat
pokgdxsansinghwbable 6 months ago in playlist www.ezFreeiPhone.tk
lol you guys r retarted im going back to porn
jmon3y14 6 months ago
I really don't like these cases, it always looked flimsy to me. But just now my older brother asked me to put it on his Droid Charge.(I'm good at perfection) To be honest the install was super easy took like 10 seconds to get it on perfect without bubbles too. You have to kind of stretch it on to fit the whole screen though, and they don't give you enough of the spray to put on the full shield for back and front. I don't really like the feel of the protector but thats just me. I like it smoother
iIlestDGK 6 months ago
This has been flagged as spam show
DO NOT BUY THIS!!!!....I GOT WATER DAMAGE FROM THE LIQUID PROVIDED!!!
Iwaynel 7 months ago 2
@Iwaynel i did get a replacement iPhone from apple though > 3 >
Iwaynel 6 months ago
@Iwaynel <------what he said
Iwaynel 6 months ago
This has been flagged as spam show
DO NOT BUY THIS!!!!....I GOT WATER DAMAGE FROM THE LIQUID PROVIDED!!!
Iwaynel 7 months ago 2
@Iwaynel<----- what he said
Iwaynel 6 months ago
@Iwaynel <-----what they said he said
Iwaynel 6 months ago
This has been flagged as spam show
DO NOT BUY THIS!!!!....I GOT WATER DAMAGE FROM THE LIQUID PROVIDED!!!
Iwaynel 7 months ago 2
This has been flagged as spam show
DO NOT BUY THIS!!!!....I GOT WATER DAMAGE FROM THE LIQUID PROVIDED!!!
Iwaynel 7 months ago 2
DO NOT BUY THIS!!!!....I GOT WATER DAMAGE FROM THE LIQUID PROVIDED!!!
Iwaynel 7 months ago
@Iwaynel Too But Rly
Scissorify 6 months ago
DO NOT BUY THIS!!!!....I GOT WATER DAMAGE FROM THE LIQUID PROVIDED!!!
Iwaynel 7 months ago
@Iwaynel your probably the only one that said that. why wud they give you the spray if it will damage your idevice?
ROFLitZjEffReY 6 months ago
This is BULLSHIT! the product is supposedly good and the material from which it is made also feels ok i guess, but i came up with a conclusion that you have to be super pro at this, it does look very easy, i agree! but its waaaayyy easier to FUCK it up! you try again and again, and then some dirt comes beneath the shield, which you can't make go away, and ultimately u get so fucking pissed for spending over 25$ for it, i dont really recommend, try other alternatives
xSniperDelux3x 7 months ago
@xSniperDelux3x i hope you realize there is a lifetime warranty...
santaahobo 4 months ago
@santaahobo actually i am very well aware of that, but it doesn't matter at all! it has already failed as a product, and a lifetime warranty doesn't necessarily make a specific product worth buying, for me it is just a way to tempt people and convince them to buy it. i hope they will come up with something else that will prove itself in a better way and will be actually simple and useful as much as people would expect from something like that to be..
xSniperDelux3x 4 months ago
Comment removed
xSniperDelux3x 7 months ago
Comment removed
xSniperDelux3x 7 months ago
is it supposed to like be some liquid again between the phone and the shield or did i use too much of the spray??
VegardTheSkater 7 months ago
Big problem, i bought it, less than a week, edges starting to peel off. Went back, they repair, after a week, peel off again, even worse. Went back second time, they said, adhesive already gone, they cant repair. FAIL!!! Wasted my money
archmad 7 months ago
Gadget Filmz is 50,000 times easier to install and has a life time replacement even if you mess it up while installing it! they also have this carbon fiber that looks amazing! love my iphone now.
rogder1431 7 months ago
this product sucks i got small amount of spray, so i used water instead and it got fucked up. military grade my ass. u.s made my ass.
purple7427 7 months ago
I just installed this on my phone (I only bought the front piece) it's really not too hard to install, but yes, you are spraying liquid onto the phone. The important thing to remember is that you should be focusing on the glass. Don't drench it and it will be fine.
msellman5284 7 months ago
It looks easy but, After I tried the back piece... 1 word !Shit!
MrLaith97 7 months ago 18
@MrLaith97 IKR i just gave up and bought an incase case lOL
GungFuPanda 7 months ago
Anyone who doesn't understand that you are putting liquid directly on an electronic device as a basic principal here is fucking retarded.
mrmikej03 9 months ago
GET.;,IPOD'_`TOUCH.;;F'R'E'E:`:
ＷＷＷ.ＦＲＥＥＩＰＯＤＨＥＲＥ.ＴＫ
COPY::`THE,`;ADDRESS';'
WentilianaVergie 9 months ago
I have this on my x10 mini, it functions very well and is barely noticeable but it makes the grip suck especially when its warm outside and your hands are sweaty, that combined with the small size of the phone makes me drop it all the fucking time lol
dannee543 10 months ago
very hard to install
1bbn777 10 months ago
This has been flagged as spam show
GET.‵,A'‵◜IPHONE,‵,FREE.'◜
ｗｗｗ․IPHONE4UFREE․TK
MoisesMcKinney 10 months ago
This has been flagged as spam show
★★★ Get a Iphone on My Website ★★★
WWW.ＩＰＨＯＮＥ４ＦＲＥＥ.ＴＫ
Copy & Paste the URL Above ...
FlorentinoPhipps 10 months ago 12
Love this product.
johnnylor34 11 months ago
I just got this today on amazon.com for $15 and it was easy to put on I think everyone should have one of these I'd you have an iPod touch it is worth the $15
dannygranger3 11 months ago
i did this and then it looked like my ipod touch was gonna die, then my mom screamed at me because it costed like 20 dollars and i messed up my ipod touch that was like 200-300 dollars? then i hated the invisable shield... but the next day it was all clear and flawless and stuff and i was likeYAY!!!! then my mom apolagized to me :D
LOLanyday 11 months ago
this looks like shit on my ipod touch
TheDude9459 1 year ago
i nearly died by installing this
PianoTymmey 1 year ago 50
is it safe to spray on the phone ?
eEemppUu 1 year ago
Some screens arnt ment 2 come n contact with water at all zagg product is garbage !!!!!!!
313bro 1 year ago
This has been flagged as spam show
@313bro @eEemppUu the stuff is non-conductive, unlike water. so you could theoretically spray it directly on your internal parts and they would still work fine. I've put a few on different phones now and its really not scary. as long as you take your time and follow the instructions.
mrendall90 11 months ago
@ CoolCanadianGuy7 1st learn to read miss typed or broken text 2ndly pay me & i'll take my time 2 tex properly 3rdly no where in my instructions did it say avoid ports I don't know about wut u thinkn but this product is bullsht how the hell do u avoid ports when phones r made differantly? that dam water doesn't help the screen still sticks during process,the end result is a soked phone.
313bro 1 year ago
I called and found out this morning that the so called solution is 99% water,no wanings on package zagg should be sued!!!
313bro 1 year ago
THE BOTTOM LINE ANYTIME U SCEPTICAL ABOUT SOMETHING COME 2 YOUTUBE 1ST AS A RULE!!!!!!!
313bro 1 year ago
ZAGG SHOULD BE SUED FOR NOT WARNING US ABOUT THE HARMFUL EFFECTS OF THE SOLUTION A SALES PERSON AT RADIO SHACK TOLD ME IT WASN'T HARMFUL 2 PHONES NOW AFTER APLYING WITH LOTS OF SOLUTION I'M READING THIS WTF!!!
313bro 1 year ago
@313bro 1st learn to speak bud. 2nd Its water, avoid the ports like they CLEARLY said and let your device sit for 24 hours like they CLEARLY said also. Don't blame Zagg because you can't follow instructions, or even type properly. By the way, YOU DON'T NEED TO TYPE IN ALL CAPS TO GET PEOPLE TO READ YOUR COMMENT
CoolCanadianGuy7 1 year ago
would it fit on a iPod or is there an iPod version please reply.
MegaSn00kie 1 year ago
@MegaSn00kie would it fit on a forth generation i mean.
MegaSn00kie 1 year ago
@MegaSn00kie There's a version for all versions of the iPod.
TheHabboNetwork 1 year ago
20 bucks for this??, and guaranteed a schmo like me gets a spot under and I gotta redo
jsheehan100 1 year ago
I don't know why people say its so hard lol
When I did it I watched 3 YouTube videos before hand
If you watch only one short tutorial and rush it then of course you're going to mess up ;)
iHsg16 1 year ago
Who ever said my phones volume was fucked up is because you didn't avoid the ports :)
chavitavb 1 year ago
haha had mine put on by some guy in Thailand lol gotta love em
Davezy1 1 year ago
this is WAY harder than it looks. I totally failed it when letting finger marks and other dust in there, couldn't get it off, i washed the shield like for 5 mins, no change :S
SanAnkka 1 year ago
I wish I was U :~/
ljbew 1 year ago
u scratch it with the table!
RNBmaster100 1 year ago
This has been flagged as spam show
ordered mine from visitnow.org only 5$ and with rubber/silicon materials that can really protect your iphone from the collision with the floor, real antishock capabilites.
the best 5$ spended ever!
gadgetsgurus 1 year ago
**be careful when putting on that spray, i fucked up and got into the earpiece now i cant hear who im tlking to.
14minusthebear 1 year ago
I use these products for utility items such as digital voltmeters and embedded controller displays. Small phones also. To put one on an ipad or droid tablet is just going to make it look like crap though. Plus it is really difficult to get the bubbles out and the squeegie will scar the surface of the film if you press to hard.
ValiRossi 1 year ago
Comment removed
sulkyns 1 year ago
@moonstarproductions nice fone, me got the shield for the samsung i900, but i had it for the ZTE Blade =)
Btw, ive tried this out with rubber gloves, maby its easier that way :D
ziwx 1 year ago
@moonstarproductions haha, or you just sat there all day long and waited for a reply ;)
What phone did u have the sheild for?
ziwx 1 year ago
@moonstarproductions haha, i've done 2 already and it wasnt very hard...
So what shield is easier to put on ?
ziwx 1 year ago
hey does anybody know if you supposed to put the piece of sheild over the home button?
GoZito75 1 year ago
you can send your device to ZAGG (the makers of invisibleshield), for a professional install. they charg$15. i had them install my shield on my iPhone and looks perfect
MELTER04 1 year ago
ITS NOT THIS EASY
mocool50 1 year ago
this guy made this look so easy lmfao
XxJSPDUDExX 1 year ago
Ok... So I bought this online for my Nokia 7705 Twist, it looks easy BUT ITS NOT! Didn't even come with a lint-free cloth... So my invisible sheild was COVERED IN DUST BECAUSEI DIDNT HAVE ONE. Also my phone got soaked and got inside my phone. GREAT. Awesome thing though :D
Ijellop 1 year ago
@Ijellop it never said it came with a cloth.
MommyKiller1 1 year ago
@MommyKiller1 I've bought several and I believe it's supposed to come with one microfiber cloth.
TackyNames 1 year ago
i got this on my ipad....SO ubbes or shit wrong its awesome :D but yeah dont use it for like 2 days oorrrrrrr u may mess it up
XzTOBYzX 1 year ago
ALL these cases are like building a FORTRESS, but without the Gates.
THE DISPLAY IS STILL CONSTANTLY EXPOSED!!! Idiotic.
I guess Apple earns so much money on repairing displays they dont allow cases that protects the Display.
My brother (does heavy works with construction) got a case with carbonfiber-like material but with a cover/lid part for the Display, wich saved it (iPhnoe3G) many times over. Neither him nor i can find it in any of the stores anymore!
>:(
Bellybeard 1 year ago
@Bellybeard Get an otterbox defender.
mjon5706 1 year ago
This has been flagged as spam show
@Bellybeard do you post this comment on every invisibleSHIELD video? It's really annoying.
destinationpsp 1 year ago
it brocke my key not my phone
1dptwin 1 year ago
lol he is using a shamwow
anwachukwu 1 year ago
how come they do it so easily
BULLDOGS476 1 year ago
what's an iphone?...i have an android!
souls666 1 year ago
@souls666 ´what the fuck is an android?! souns like shit bitch.
ORQUIDEASALVAJE 1 year ago
This has been flagged as spam show
@souls666 ´what the fuck is an android?! sounds like shit bitch.
ORQUIDEASALVAJE 1 year ago
My installation experience was much different than this. I bought one for my EVO and followed the directions EXACTLY, even sprayed my finger tips. That god damn sticker did not slide one little bit once it touched the screen. It was like fucking super glue. After pulling the thing off probably 7 times and re-wetting it with no luck it turned into a matter of trying to just lay it down perfect cuz I knew it wasnt gonna slide. Ended up getting shit under it with my 15 minutes of manhandling. Junk
supchaka 1 year ago
@supchaka Indeeeed, fml
rabbben 1 year ago
its like were performing surgery or something
Airman32292 1 year ago
i should of seen this video before i attempted to install it... it was just a disaster.
johnthegreek80 1 year ago
the new zagg doesnt include the spray anymore they have a new sponge which makes it even more harder to install.. idk why they stopped making the spray
vipercccp 1 year ago
damn where do u get lint free cloths
danthaman7777 1 year ago
@danthaman7777 anyone who has a glasses case just rob/borrow it
Hashpotato 1 year ago
even though i dont even have one of those i still think its the best protection prodoct for the psp iphone and a bunch of other electronics
ThePaulmax029223 1 year ago
Follow the damn directions and it's not THAT damn hard. Took me about 15 mins of playing with it. Don't be excessive with the damn spray, don't get frustrated when it looks like crap, cuz it takes days to look right, and don't worry about the 12 hours, I never turned my phone off once and it's fine. Impatience abound in here. I just put mine on 3 hrs ago, i'll let you know in 3 days if it turns out right.
shaftymacnasty 1 year ago
Had the shield for over a year. I took it off though, because I got some chemicals on it and ruined the front. My iPhone screen was as good as the day I bought it. I called ZAGG and they shipped me out an entirely new set, no problems. They will even install it for free. Thumbs up to ZAGG.
tike0rz 1 year ago
This is the worst product ever! The shield was not cut for my ipod. (YES I BOUGHT THE 2g version) The headphone jack kept getting covered along with the power button AND USB connection port. The "water solution" made the shield not stick to my ipod (i even waited 1hr for drying!!) And I tried registering my product and it wouldn't let me! After all the stress i just took the shield off crumpled it and threw it AWAY. IT EVEN LEFT PERMANENT STICKY GOO STUFF ON MY IPOD!!! Great! THUMBS DOWN!!!!
MagicXXMadness 1 year ago
@MagicXXMadness The installation instructions clearly state to wait for 12 hours for drying
Synergist2k 1 year ago
I mangeded to turn the phone on 3 times during the installation.. so i guess it wont matter if i wait 12 hours now. I have a htc desire btw.
Kogrant123 1 year ago
After installing this, my iphone is destroyed. Only some of the touch functions work. Now I have to buy a new iphone ... I am so mad at ZAGG now
Cherrysangel83 1 year ago
@Cherrysangel83 wow really? 3g or 4?
Menace013 1 year ago
This is A LOT harder than it looks! I f*cked it up!
MASKdk 1 year ago 60
@MASKdk
It's a fucking PAIN in the ASS!!
fibreoptik 1 year ago
@MASKdk damnnnnnnn riteeeeee
lilegyptshun 1 year ago
This has been flagged as spam show
they dont give enough spray
chipmonkeyharvey 1 year ago
some of these steps and techniques won't in the documentation when i got the zagg sheild...
legendabc123 1 year ago
is it safe to spray it with the solution? because the solution will touch the device..and do u have to spray it? cant we just stick it on?
MrToad321 1 year ago
WTF?! 12 HOURS?!! I'll die before then!
MrJNEW82 1 year ago
@MrJNEW82 I KNOW, im getting my iphone 4 in 10 days, i want to put it on the phone while its brand new and never touched but umm 12 HOURS!!!
Can i just like wait 3
Kromius99 1 year ago
I'd rather not spray anything at my phone.
Kebbe666 1 year ago 2
@Kebbe666 the stuff is non-conductive, unlike water. so you could theoretically spray it directly on your internal parts and they would still work fine. I've put a few on different phones now and its really not scary. as long as you take your time and follow the instructions.
mrendall90 11 months ago
lol id screwed up I spayed also the iphone too and with spraying the front shield, but everything came out good at the end, they should came with 2 sheets instead of 1 sheet,
xxbox6191 1 year ago
My only tip is when applying the the corners and sides is to leave them to dry for at least 10 minutes so they dry and get sticky enough, if they are still wet they will not stick. When this is done use the palming technique and your fingers and hold it till it stays. I found it a bit tricky but got it in the end ;). Only difference is in England ours comes with sponge soaked in solution instead of the spray.
Awesome product 10/10.
hotlips922 1 year ago 2
@hotlips922 not true spray is sold with it in the carfone warehouse in england
chipmonkeyharvey 1 year ago
@chipmonkeyharvey Strange, I bought mine from Carephone a couple of weeks ago ant there was no spray. Seriously it was only a small sealed tray with a black sponge in it, cost me £15.
hotlips922 1 year ago
i have just installed my shield onto an iphone 4. i had no problems with it. as long as you take your time then you dont get any bubbles . i would recommend it to anyone
icclewu 1 year ago
It protects the hoke button also? Cool
Frosty6209 1 year ago
@Frosty6209 gotta love the hoke button ;)
djsfilms1 1 year ago
For scratches, but remember that there isnt cases that wud protect ur ipod or iphone. If u drop it a few times you will see that the memory of the iphone and ipod touches begin to fade. So better keep your Ipod/Iphone on real safe and like a flower in your hand.
Firter 1 year ago
this guy has fat fingers
kimsterjizznugget 1 year ago
would it be possible to put one of those in a car???
NoLgU3N 1 year ago
Bodyguardz is much better
ThaAivd 1 year ago
Is this antiglare or the reflective ones? btw, is there any shipping available?
JustinMac92 1 year ago
oh so its that easy! sweet! i thought it would take a whole hour of disappointment
great product though! :D
TheGrove101 1 year ago
I received mine for my iPhone 4 last week. The back went on fine. But the front messed up so I've had to order another front screen :(
Good product though, I definatly reccomend it. The texture does take a few days to get used to though.
HTUK2007 1 year ago
i was thinking my iphone would go invisible after wearing this superhero costume on it
areev 1 year ago
i just got the iphone 4, should be here in a week or so. anyways i got a skin fom skinit.com and i wanna put this shield on top of the skin. is it possible?
mendizeo 1 year ago
This has been flagged as spam show
I wanna take a shit on it
boyzinyourclub 1 year ago
Is it safe to get the adhesive on the speaker like that? I got this and want to put it on my iPhone but can't imagine spraying adhesive either on the speaker or on the home button... Not sure what to do..
nmr85 1 year ago
Apple should sell the iphone with this already installed!
Hazsgs 1 year ago 152
@Hazsgs ??? yes
obeit1 1 year ago
@Hazsgs But then they would increase the price by another 100 dollars because they are greedy.
i3ak3ri301 1 year ago
@Hazsgs
this is the best comment i have ever read!!!!!
No Joke!!
knexfan0011 1 year ago
Do I really have to use the spray for the installation? Can't I just stick it on directly?
(Front shield)
OE47 1 year ago
@OE47 yes you can but only if you are confident that you wont mess it up.
SwissshProductions 1 year ago
@OE47 no, you have to use the spray. the liquid underneath is really helpful for squeegeeing out bubbles.
Coodude26 1 year ago
@iDoxish yes its just like a screen protector. They come off
Ranman46 1 year ago
whats the name of the song within the first 13 seconds of the video
johnny5634 1 year ago
Installing was hard, their site is weird. I have weird coloring dots on my screen and a lot of bubbles on the back. Now I have to leave my iPhone alone for 24 hrs, which is a true hell for me.
MrSkaapable 1 year ago
Do these actually work well?
carlinecaribou 1 year ago
@carlinecaribou They work okay. I got one awhile back and it looked nice but then the texture of it is just horrible. when you tap on things on your iphone it doesnt respond all the time, and like i said, i personally dont like the texture of it, it feels really weird. it does work though
ZombicidalZach 1 year ago
Just get a whole plastic covering. I got a grifin case for my ipod nano and they have a case for iphones too.
MrChilloutDude 1 year ago
This has been flagged as spam show
@InfoBall987
You have a point, All the additional features are fantastic, the only thing dissapointing is that the screen is smaller.
Alot of people watchin' this video don't have the cash to afford the iPhone 4g, it's just going to cost alot
Good news, I discovered on the Apple FB Fan Page earlier they are giving away a ton of iphone 4gs. If your lazy, this is the link to Apples contest page ... just copy and paste
shortener｡org/37964
Use this code at the end FACEBOOK10541
MrsBunnies1990 1 year ago
fucking crap. Never buy this shit
Sunkmaster2000 1 year ago
I thought you couldn't get any kind of liquids on the device ?
mmw21111 1 year ago
that spray bottle is nothing but soap and water, its just like putting tint on a car window real easy.
safwan19 1 year ago
This has been flagged as spam show
USAiTunesGiftCards . COM Says it all !
preemptivejonat 1 year ago
So today we have three iPhones with ZAGG(tm) shields on them. The question is-Will it blend?
ShadowkingA321 1 year ago 2
if i put the InvisibleSHIELD on the front only will I Be Able to put a case on the Back?
WIZARDTOONTOWN 1 year ago
@WIZARDTOONTOWN
Ya, they're very thin, hardly noticeable.
originalarmo 1 year ago
will invisibleSHIELD protect my iphone from getting blended?
nallenito 1 year ago 45
@nallenito yes
lvrcmps1027 1 year ago
@nallenito now that is the question my friend
rakovski95 1 year ago
T-T-T-T-T TWELVE HOURS?!?!?!?!
WIZARDTOONTOWN 1 year ago
To everyone considering buying this. If you are mentally ill, don't buy it, cause you prolly wont be able to apply it. But with an IQ over 50 this is no problem at all, and the result is perfect. You get a few "clusters" of small bubbles, but they were gone after 10 hours. Used it for 2 days now, and no bubbles are left and no scratches. Awesome shield if you ask me.
Noooxid 1 year ago
This has been flagged as spam show
i am so pissed off at this company. for the blackberry 85XX series they dont' have this freaking spray and i jsut screwed mine up and it looks horrible and if your hands aren't perfectly clean and you don't take off the "backing" when it DOESNT EVEN TELL YOU TO then your left with a stupid piece of sticky plastic that you crumble up, spit on, and throw out. FUCK
mikeguimond94 1 year ago
i am so pissed off at this company. for the blackberry 85XX series they dont' have this freaking spray and i jsut screwed mine up and it looks horrible and if your hands aren't perfectly clean and you don't take off the "backing" when it DOESNT EVEN TELL YOU TO then your left with a stupid piece of sticky plastic that you crumble up, spit on, and throw out. FUCK
mikeguimond94 1 year ago
can you take it off if you want? or is it permanent
doukhead 1 year ago
I am going to buy an iphone soon, and I was wondering if anybody recommends this product. Please Reply.
h8tenonyou 1 year ago
@h8tenonyou i would if u have lodes and lodes of patients but when i brought one it didn't go very well and i ended up ripping it off and lobbing it out the window
hasmanDUDE 1 year ago
@h8tenonyou don´t buy it. It´s crap
Sunkmaster2000 1 year ago
If an infant would've been present while installing this, I would have punched it.
ARGH!
Drumsquire 1 year ago 4
@Drumsquire maybe someone should punch you in the genitals so you don't have to worry about that problem
SodiumCyanide 1 year ago
lol.. i bought only front coverage and they sent me front and back coverage :-) ..WIN!
AirCalv 1 year ago
dont buy this product. installing it is a bullshit. i regret getting this. i should've just watch the video and reviews first. :( just a waste of money and time.
lowkah 1 year ago
Its the worst crap ever i got lots of scratches and it get ruiend and fall off after time dont buy it
TheVampireXhunter 1 year ago
Interesting product. Looking at this for my HTC Desire.
Nagrom0709 1 year ago
Wash those hands.
foshizzlefizzle 1 year ago
how you make the ™?here i only paste it.
nikos4603 1 year ago
is there one for Iphone 3GS ?
ao0o0o0oa 1 year ago
@ao0o0o0oa
The 3g shield works fine for 3gs since they're the same dimensions.
originalarmo 1 year ago
@ao0o0o0oa there is an invisible shield for every smartphone
MrAnimeStealth 1 year ago
OK, i have an old case that fits exactly to my ipod touch, instead of palming, adn I put the shield on,( im only doing the back) adn close it up in the case? will that help the corners adhere?
aaron13133 1 year ago
i think it's made of carbon nanotubes which is even harder than diamond and there for harder to scratch. Things softer than other gets scratched by harder materials. hard materials are hard to form and soft materials like water is easy to form
1337saklart 1 year ago
The invisishield was honestly quite dissapointing. I've used similar protective films in the past, they were all easier to apply, have resisted scratches better (scratches to the film) and have had smoother surfaces.
I expect to replace mine for a better looking one once I feel like wasting another $10-20.
s4jt 1 year ago