Yeah I didn't realise this until i fit it all, but i still managed to screw in the HDD's without taking the mobo out though, the case is fantastic, one of the best out there tbh, next upgrade would be the TJ07, as it's probably the best case you can get, and best for watercooling.
'rv01 is better than the rv02' answer of you 'In looks yes' are you serious the rv02 sure doesnt look better than the rv01 ?? you got to be kidding me??
Are the blue led fans u replaced on the H50 good enough to provide just enough light inside the case? I might do that with the H70 i'll be getting. or I was thinking to replace 2 or 3 or three of the bottom fans with blue led fans, or would that be too much?
Does anyone have a vid of a 5970 in a Raven RV01? I can't find any, wondering if it needs some customizing to make it fit. I see it JUST fits in this RV02.
thanx, btw you know the bottom 5.25" bays that hold the hdd cage? yeah from what I have seen, is there a solid plate that holds both parallel sides for the 5.25" drives if so, how thick is it, is it a whole piece or a simple thin piece? im just wondering cuz I too wanna buy this case and remove that area to mount a quad radiator thanx
There are only two solid plates that hold the cage in (Part of the case wall). Also there are three 5.25 metal plates in the front panel that can be removed; you might be able to mount a rad in the front but might require some modifications.
yeah but i meant at the way bottom u know on top of the first 180mm fan? this area concerns me, like is there a mesh plate or a thin bar a solid plate on top of the fan (not the fan guard)?
*Please note due to the orientation of PCIEX 1 and PCIEX 2 slots on this motherboard, an ATX case with 8 expansion slots is required in order to TRI SLI with full mounting capability.*
Does the H50/H60/H80 fit in the Raven?;o
RozzoFX 6 months ago
@RozzoFX
I got the H60 in mine, fits fine.
Sirdiggar 4 months ago
@Sirdiggar Yeah, im getting a new case though, the Raven is kinda a fail to me, cant get out the HDD cage without taking out the mobo... :/
RozzoFX 4 months ago
Comment removed
Sirdiggar 4 months ago
@Sirdiggar Yeah the case is real good, it's just not what I want im afraid, I prefer other cases that have the standard layout, xd
RozzoFX 4 months ago
@RozzoFX
That's fair enough, each to their own!! I love the 90 degree layout to be honest, makes me two 560 ti's in SLI look cool :)
Sirdiggar 4 months ago
This has been flagged as spam show
Respond to this video...
Yeah I didn't realise this until i fit it all, but i still managed to screw in the HDD's without taking the mobo out though, the case is fantastic, one of the best out there tbh, next upgrade would be the TJ07, as it's probably the best case you can get, and best for watercooling.
Sirdiggar 4 months ago
This has been flagged as spam show
is the rv02 not smaller?? and i see over there
'rv01 is better than the rv02' answer of you 'In looks yes' are you serious the rv02 sure doesnt look better than the rv01 ?? you got to be kidding me??
clinte1 11 months ago
@0:31 CRYSIS 2!!!!!
JayJapanB 1 year ago
Awesome build.
Are the blue led fans u replaced on the H50 good enough to provide just enough light inside the case? I might do that with the H70 i'll be getting. or I was thinking to replace 2 or 3 or three of the bottom fans with blue led fans, or would that be too much?
lenmetallica 1 year ago
this case sucks....
XVAGOSX1 1 year ago
rv01 is better than the rv02 ...
barttttt13 1 year ago
@barttttt13 In looks yes, in cooling no
Scorpion7substance 1 year ago 6
Nice Build.
How's that board been working?
Any problems with it at all?
Thanks.
spearmintmonkey 1 year ago
Question regarding your H50 setup...
Its at the top blowing air out of the case or do u have push pull going out of the case?
brent3k 1 year ago
@brent3k I'm using push and pull, the air is pushed out to the top of the case
Scorpion7substance 1 year ago
@Scorpion7substance And that works for you? Cuz im thinking of how to use one in my case (didnt like the whole air coming into the case sorta thing.
Whats the average temp u get on load?
brent3k 1 year ago
@brent3k Prime 95 100% CPU max temp @ 4.0Ghz 68C. CPU idle temp 32C.
Mobo max load temp NB 55C, SB42. Mobo idle temp 34C.
Scorpion7substance 1 year ago
@Scorpion7substance no way! I'm getting this case w/ a GTX 480!
johnyrockshell 1 year ago
@Scorpion7substance
so the top is exhaust??
nd da bottom is intake??
bradahbob 1 year ago
awesome build!!!
shizdank 1 year ago
@shizdank Thanks sir :>D
Scorpion7substance 1 year ago
Does anyone have a vid of a 5970 in a Raven RV01? I can't find any, wondering if it needs some customizing to make it fit. I see it JUST fits in this RV02.
lonobersdieteren 1 year ago
pwhy would they pout the window on the right... -_- rv02 is shit
madzane94 2 years ago
what blue led fans are those? they look sweet!!!
UberPanzer666 2 years ago
Rosewill RFA-120-BL 120mm 4 Blue LEDs LED Case Fan
Bearing Type: Sleeve
RPM: 2000 RPM
Air Flow: 74.48 CFM
Noise Level: 29.28 dBA
Power Connector: 3 / 4 Pin
Color: Blue
Compatibility: Case
Dimensions: 120 x 120 x 25mm
Model #: RFA-120-BL
Scorpion7substance 2 years ago
thanx, btw you know the bottom 5.25" bays that hold the hdd cage? yeah from what I have seen, is there a solid plate that holds both parallel sides for the 5.25" drives if so, how thick is it, is it a whole piece or a simple thin piece? im just wondering cuz I too wanna buy this case and remove that area to mount a quad radiator thanx
UberPanzer666 2 years ago
There are only two solid plates that hold the cage in (Part of the case wall). Also there are three 5.25 metal plates in the front panel that can be removed; you might be able to mount a rad in the front but might require some modifications.
Scorpion7substance 2 years ago
yeah but i meant at the way bottom u know on top of the first 180mm fan? this area concerns me, like is there a mesh plate or a thin bar a solid plate on top of the fan (not the fan guard)?
UberPanzer666 2 years ago
Also look at the atx case review from the 3D Gamerman for the RV01 I think he pulls out the front panel of the case.
Scorpion7substance 2 years ago
Does the top off the case slide back...? Or am i thinking of a thermaltake case?
garretts228 2 years ago
no you have to pull it off and it snaps right back on
Scorpion7substance 2 years ago
*Please note due to the orientation of PCIEX 1 and PCIEX 2 slots on this motherboard, an ATX case with 8 expansion slots is required in order to TRI SLI with full mounting capability.*
Scorpion7substance 2 years ago
awesome vid.
whats name of the song ? :)
b0ss6769 2 years ago
Thanks just cooked up a little video to show the RV02 case, The song is by Nas, "Hate Me Now"
Scorpion7substance 2 years ago