My PMr is possesed.

[AAVince2513]

missing o ring

[GenGen0089]

wo man that lookso much like my PMR i even have a black sock on my co2 tank

[SamieMan1]

Woww, tighten it you dumb ass!

[biggtubbz]

hey dumbass u shuld prolly got use an allan wrench on it

[10mcguire1]

my metal one does that just get the allen wrench that fits the back cap and tighten it but not too tight

[DTATODAYify]

its stripped or the small screws inside are screwed in too tight

[DADDYKRUSE1K]

how the hekk is that possesed

[Zgut94]

mine does the same thing, please help! cannot play with it like this

[Zgut94]

Mine does the same thing PLEASE HELP! im pretty sure its the o ring but im not sure. anyone know whats wrong?

[TylerDailey]

@Zgut94 the screw cap is stripped get a new metal one...

[987koolkid]

@Zgut94 u stripped it u need to buy a new backcap upgrade it to the metal one

[rampagedpaintballer]

im gonna laugh when the back cap files out and goes into your eye

[PushPopKilla]

how bout you get a allen key and tighten it you dumbass

[paintballsuperfreak]

get a new gun

[droyfiend138]

tighten your grub screws

[AlbieGfromMyspace]

worn out threads probably..

[warpedspeed05]

Haha my g3 did that

[WolverineFan317]

worn out threads

[pepsidude308]

tigten it so that its really hard

[paintballapilot4]

just tighten the bolt like fuck...or get a new back cap

[nelaHnaVeiddE]

Vibration's just moving it.

[OMGitzMason]

hahahahahaha thats funny, get a orange bolt

[ingz1993]

what do u mean whit that?

do u know anny good uppgrades for pmr?

[OMGitzMason]

its a type of bolt, a really nice one. you can get a dye ul frame, a little pricey. um a on/off is convenient i would recomend custom products. they also have nice regulators.

[ingz1993]

k.thanks

[Lboyer1992]

UL frame and Barrle, new back cap(no one likes plastic) new asa and a new feedneck if you dont have the clamping lever

[paintballer9608]

put some locktite or pipe sealing tape on it

[SnuggleBear545]

Has nobody heard of loctite! :)

[starfox477]

i have the same kind and it does that too. it sucks when it happenes in the middle of a game cuz i have to keep spinning it in with my hands. before every game i just have to tighten it alot

[emerica245]

screw it in tight with an allen wrench

[WAHOOBOYS]

mi back cap ripped off can anyone tell me how to put a new one back on

[voodoo996]

On the back of the bolt where the back cap goes, there are little Allen screws. Unscrew them a little bit and it should go in fine. Then tighten them again but not too tight.

[middleman017]

reminds me of scary movie 2 when the possessed girls head spins as she yells

[swingline5678]

you need a new back cap its stripped

[SocomHAX24]

yes the threads on the side are ruined

[copperfront]

BE CAREFUL! the last thing you want is it to blow out the back in your face when your playing

[gaijiinn]

Really the newdesignz back cap is worth it.. Kinda expensive for a piece of alluminium (25$) but all the backcap probs will be solved

[xabjxskater]

u might have stripped it, u might need a new back cap or o ring

[KaosFromCoD4]

either ur hand tightning which ur not supposed to do and is not tight enough or u need to replace ur oring

[pbstryker]

oring or u know what just go a new cap cheaper almost lol

[sweetlicks123]

tighten it hard thats what happens to my grip screws

[thec0nky]

funny, my back cap is jammed into my gun and i can't remove it to get at the bolt.

[calvinloveshxc]

get one of the aluminum ones

[kirbdawg3]

fukin o ring dumass and tighten it more fuktard bich tits

[Daveyvibe14]

replace the o ring on the cap.

[protomatrix15]

why dont people just get the PMR SE for $15 more its has the aluminum back cap and everything

[SpeedBaller45]

i know right?

[ipodman161]

its $25, lol, and idk its such a great deal.

[jayman5895]

you striped the backcap because it is plastic they get stiped pretty much on every marker so you have to buy the aluminum backcap for about 30 bucks.

[ShockerIAN]

screw it in tighter, i would say use loctite but then you would never get it out. Just drop $25 on an aluminum one.

[jfkdidmymom]

just get an alloy back cap from ndz, great product

[SgtBootz]

Nvm this was added a year ago... my biz

[n1ck01907]

wyf how is it possesd

[Bloodlezz]

Its just a joke to show that his PMR backcap was just moving on its own. Solution as said - Aluminum Backcap (As said above and below)

[miotch910]

theres 4 little screws on the bolt where the back cap goes in, the 1 at the bottom has to stick out a lil bit and im pretty sure that will stop this, i just got my pmr its a great gun btw

[hk703pball93]

lol mine would do that in a game and id be hold it with my fingers and shooting. tighten it super tight and it stayed for me.

[ihateionhaters]

LOOOK REALLLLLLY closely in the back cap there is TINY screws that go in a groove you need to screw them out enough to catch the grove

[JAG9100]

It's because it's not tight enough. My shocker doe's the same thing.

[eugeniy123]

watchout for that...u might be playing and the bolt opens up and hits you in the face

[juggalocamo]

ow!

[RswirdS]

u got a mask on when u play, u kno

[juggalocamo]

yea but theres alot of force behind that bolt

[RswirdS]

doubt it would have hurt...

[juggalocamo]

i bet it would

[SgtBootz]

Did it look like he was playing. Cause i sure as hell didnt see bunkers. For the person who made this video. You need an Aluminum backcap, cause you probably over tightened your back cap, stripping the threads now it is always loose and when you shoot it, it will spin. Buy a new back cap

[BryTab5492]

wow what a retard. theres a reason why it comes with tools...

[paco91]

thats a turn off in trying to get this gun...and in another vid someone reviewed it that since its cheap plastic things break a lot so fuck it im going with the invert mini...i heard it kills the ion and this gun but never know ill make a vid when i get it to see if i like or not

[ionforlife101]

i think the oring on the back is to small and alows it to spin. try changing the oring.

[yashescooll]

maybe u didnt screw it in tight enough?

[COBRAGT45]

Wow you use your hand to tighten it a the start of the vid

KNUB QUIT PAINTBALL!!!!!!!!!!!!!1

[sp33dBALLA]

ye i think its stripped

[cj397]

is that the stock back cap?

[p8ntballer193]

put some locktite

[ImMrBoom]

NO DONT USE LOCTITE YOU NEED TO BE ABLE TO UNSCREW IT TO LUBE! Get a new back cap (NDZ is good) looks like your threads are stripped

[p8ntballer193]

sorry didn't think about that.

[paintballgundown8]

keep shooting

[sportsman7034]

all u need to do is put in a new oring inside of there u must be missing it

[Chapmanhunter]

I think your gay

hay tighten it up and it wont do that fag

[sgtsnakeeyes11]

lol angry?

[MLMarkDark]

why the fuck dont you have my pulse??? we traded a while ago, you got my perfect pulse and rf chip and i got your broken POS Vlo... well alls good I got my money back from that, all 150 of em...

[ProtoMaverick25]

ya the same thing happened to me u striped a ring so just get an aluminum they work really good

[protorailfreak3]

take it to a paintball shop get it out and get the metal backcap...

[headshotsniping]

hey my backcap started to disform and now my allen key can't take out the bolt what can i do help pss xD

[BOCABALLER88]

can you get the backcap off? if you can take that off and use a squeege to push the bolt out from the front. then reconnect the backcap with the 4 set screws on the bolt. i had to do this myself last night. its easy

[BOCABALLER88]

my other comment was to headshotsniping sorry

[DylanDaPaintballer]

get a new designz backcap.

[piemiester]

yeah, thats just because the plastic treads got stripped. i had the same problem. just get an aluminum bolt cap and that fixes it.

[piroflash93]

hahaha! i enjoyed it i guess get an aluminum

[cowsoncrack24]

nvm u striped it gat an alumnem 1 they work beder and dont strip like that

[cowsoncrack24]

its called a fucking allan key

[aquascummm]

Actually it's called an "Allen" key

[ChickenDoughnut]

i had problems with stripping on the back cap w/the alan wrench when i had my PMR so i got an aluminum one, i had the guy install it on my bolt cuz im a busy man, anyways, he unscrewed one of the small set screws on the side, where the bolt attatches to the cap, keep it out a little ways, and line it up with the small notch in the gun when you put your bolt back in, should keep it from unscrewing, if not, then no clue

[jonnymatt1212]

yea pmr's chew up back caps for some reason, even aftermarket ones

[invertballer678]

stripped it

[eliteguitar123]

stripped dood... buy a new backcap

[blackpenguin55]

lol

[mattserna]

hey dbags that is alrdy an alluminum backcap it looks like he has on there

[rickjames400ex]

lol

its from the vibration

buy a new one

[Sk8er41000]

u stripped it, buy a new one

[137steve1373]

well theres your problem  lol

[20DEF0WNZ]

u probably stripped it, buy a new alloy backcap that wont for like 15-25$

[TheIronSwede]

Wow that back cap sucks but I bet if you used an alan wrench to screw it in like you're supposed to you wouldn't have that problem, or

go with a New Designz back cap they make good stuff I got lots of NDZ stuff on my PMR.

[maycam10]

no thats a pos

[skaterdude745]

use an allenwrench for the back cap check the ram also.

[mxbstudiosDOTcom]

Just tighten the screws at the backcap, theres an o ring in it, take it out and check for cracks. Fixed my friends earlier this morning, should be the same idea

[ooSNlCKERSoo]

lol now you no how to calculate bps on your pmr all you did was strip it----buy a new dezighns metal/allunium back cap

[Bloodwake14]

u stripped the backcap

[godumbboy]

replace the o ring

[TWITCH772]

ha this made me laugh.

[piemiester]

get a new back cap.

[paintballer1184]

teflon or get a new backcap for 15$

[enisity]

SUPER GLUE :) lolol ...im not sure exactly....whats arong wit it...

[CubanPaintballer]

you need to make sure that you put a ring in there to give it some grip

[jamparty000]

i would think the bolt would shoot right out the back of the gun wtf im gonna try that

[jamparty000]

wat would happen if u fired the gun without that thing on or how bout taking the bolt pin out on an open bolt marker and shot it wat would happen???!?!?!!?!?

[se1zure]

All the air woudl leak out is my guess.

[enisity]

....then the gun wouldnt work...u must not know much about markers....

[rempli]

how much lube are ya usin

[beauadams1]

u need to get an aluminum back cap

[se1zure]

it's an ndz backcap, quit acting like you know what you are talking about. ndz backcaps are really good.

[beauadams1]

get an aluminum back cap

[se1zure]

god you're stupid. The NDZ backcap is made of aluminum...

"aircraft grade aluminum"

I guess your head is made of aluminum too, because you can't read what i said, or see it in the video. Yout hink you konw what you're talking about, but you don't.

[hk703pball93]

lol, mines did the same, id have to tighten it with my fingers during games, then i just tightend it with a wrench, and never did that again. could be an oring.

[se1zure]

nah, i just needed to use a wrench.

[titush1991]

Thats kinda funny!! lol all i can say is check you oring and try not to lube the threads.

hope that helps

[p8ntballaholic]

ya dude its possesed for sure.(sarcasm)

[evilempire90]

um either u need to lube the last oring on the bolt or just get a replacement thats what i did but get it from new designs

[se1zure]

yeah, it just wans't turned in enough. needed to use an alan, hand tightening isn't good enough.

[beradtoosher]

try just cranking it on hella hard with the allen key. or get some loctite.

[cky438]

just to tell you if you did not know thats a bad thing...

[ProtoBoiii]

um dumbass. you dont have an oring on your backcap.

[se1zure]

there is an oring on the backcap moron.