@timewaster6991 No, you wouldn't want to refinish a laminated stock, maybe just clean it up good and maybe apply some clear varnish to help seal the stock
Great job! all you need is a lot of elbow greese and patience with this kind of project. I would like to do mine in satin finish. Thanks for the video.
Nice job; Looks great. I refinished one the same way. I left the wood its natural color and just put some tung oil on it and knocked down the shine a little with 0000 steel wool. Looks excellent.
Really nice job on the rifle. Can't really improve on what you did, so I will do the same with mine.
Bought three of them from Cabela's, one is a 1939 Tula, the other two are 1942 Izhevsk. Pretty much in fine shape and nearly identical, but the Tula's butt stock is 3/4" longer and it has metal plates around the sling holes. This one will be mine, the other two will go as gifts to my brother and a good friend. We look to start a small M-N club in S. Louisiana with them.
@TheDoug76@ThrowingSpoon help me pleas ei have an issue hwere i can get bolt all assembled perfectly set put it in the decock position the piring pen turns and coumplety out of the cut notches i can fit it perfect again put it in the gun and itll still be slightly off the set notches shood i junk my gun?
Hey brother first off let me say nice job on the finish. I also bought my first mosin on friday and it was covered in cosmoline. I personally used a Blow Dryer and it took a little less than an hour to get clean. By far the hair dryer is the least time consuming imo.
Looks GREAT! You got me so inspired that I can't wait till I order and receive mine! Where do you get "Tru-Oil"? Never heard of it..... (Home Depot, Lowe's?)
@djlouiemtraxx Ididn't stain it, I used Tru-Oil which just adds a nice shine to the wood and hardens almost like a resin, but I did each coat all at once by hanging the stock up with a wire hanger, I just bent it to go through the mag and screw holes that were empty since I had it disassembled.
Looks great. I used 8 coats of tru-oil on mine and I really like the way it turned out. Nice job :) I tried posting a video of mine to this but I'm not sure how to do it?
@TheMHandDSfan I started with a 250 grit and moved on to a 400 grit to finish it off. The cosmoline is basically just a preservant that soaks into the wood and metal over time and when the gun heats up when fired it seeps out and can cause problems like jaming up the bolt or the cartridge in the chamber
It kinda sticks to the jacket I went back to the steel In combat I what it to silde on and off quickly. But you did a great job, Its a great rifel I have 2 of them one is a finn 1895 from the ruesso-finesh war of 1938/39 they made it in to a sinper dam can it shoot. It shoots almost as well as a wen-model-70 sinper and Im a gunsmith
have fun with it. I put a scope on mine but a very good one have fun later.
beautiful rifle, love what you did with it. I had a quick question what did you use to get the shiny finish on the stock, i know you mention it but i cant quite make out what you said. I would appreciate it.
@daunderdogg It's called "True Oil" by Birchwood Casey. You can usually find it in most gunshops & sporting goods stores, sometimes Walmart even has it
Where can I get the rubber butt for the stock??? Also the ring clips for the forestock?? My son is in the process of refinishing his Mosin because he saw your video.Also would you do anything different?
@Alwayscarry1 The rubber buttpad u can get at most gun supply online stores everything from cheaperthandirt to ebay, I got mine on ebay they had the best price. As for the rings, not sure, would probably have to google it and see who has 'em, I know I've never seen a set without the stock. I've always wanted to do a more tactical mosin, pout on a synthetic black stock, bent bolt handle scope & mount, cut down the barrel, but I'd onlly do that to a mosin in bad shape, otherwise keep it original
Where can I get the rubber butt for the stock??? Also the ring clips for the forestock?? My son is in the process of refinishing his Mosin because he saw your video.
Just pick up a 91/30 today, saw you vid on dis-assembly which will be a big help, and that turned out beautiful I hope my looks half that good. Btw where did you get that butt pad? Will be using mine as a deer rifle
@tschuler3 I got the buttpad on ebay, can't remember the seller, he was offering the buttpad & the pack of 5 stripper clips for $15 plus free shipping, was a pretty good deal. Glad the vid helps, they're great rifles, but sometimes people either just don't want to or are affraid to take apart old milsurp rifles, seen too many good rifles fall apart because they never were cleaned or repaired because people were concerned about "keeping it original" I say for $125 dollar rifle have fun with it.
@NeverEnuffAmmo Thanks for the quick response, I got mine for $97.41out the door at a gun show my dad got one a month ago for a little over $100 a couple months ago and have been wanted one almost as soon as I saw it. I don't get people wrapped up on original, on these guns, others I could see I want to rebuild mine to suit my purpose not the Soviet Army's.
@tschuler3 Yeah they're great to just do whatever u want with, for the money they're great to even experiment on and see what u can make of it. This one I have now I just wanted to refinish the stock and keep it fairly stock but with a couple updates, but I want to get another one, and make a "Tactical Mosin" just for the hell of it.
@NeverEnuffAmmo Just confirmed payment on my pad and stripper clips from redbirdgunparts on ebay, I was going to put an ATI stock on it but I think Im just going to put a scope on it and leave it alone. Im considering an SKS with a dragonov stock for a fighting rifle. That one will have to wait a little while I gotta get my wife a .380 bersa and my self a .22 pistol for gator control when I go fishing in South East Texas
@tschuler3 Yeah u should wait till the next Mosin to put the ATI stock on .... lol
SKS is a great rifle, all around a good rifle for defense plus it's capable of using for hunting if u needed to, definitely worth having one in the collection.
Have you gotten it out to the range yet? I was curious about sight adjustment, I have read a couple things online about taking the front sight assembly off and drilling a hole them replacing the pin with a set screw any thoughts on this?
@LivebytheSig Haven' gotten it to the range yet, what I've heard is that if your going to use iron sights, and the front post is still in it's original position from the russian armory that it should be left alone, but again, who really knows, it's going to depend on the rifle, some of the old Mosins were more accurate than others & may have been sighted in better as well. The set screw option is probably a viable option, this particular one I'm wanting to leave original except for refinishing
@NeverEnuffAmmo it looks great anyways, I did that with my Yugo sks, the only difference i did was I took a wood burner and burned the serial number in the side of the stock. I am considering doing a video of it soon (as soon as I can get a video camera) because I havent seen any on this. It is a very accurate weapon. I will let you know when its up so you can take a look at it. Thanks again for the vids and keep them coming.
@jackmeoffer I have someone (don't know who it is) who watches all my vids just to give them a thumbs down. They've been doing it since mid summer, I don't know who it is, or why they don't like me, but whoever they are they're at least giving me a view for the vid, and they do it so soon after I put the vid up that they have to be subbed to me to know I put up a new vid, so I don't care ..... lol
@NeverEnuffAmmo Your Mosin project has me thinking I want to do one. Any tips on where to buy one? This summer I would see them at gun shows, but was not interested then. Now I think it would be a great winter project to get one cleaned up. Let me know if you have any suggestions.
@jackmeoffer Yeah definitely gun shows are the best place to get them, cause you'll usually get the best price there, other than that order one online from jgsalesDOTcom u can get one for $79.99 , now u have to pay for shipping and an FFL transfer fee to have it sent to an authorized FFL in your area to pick it up, and if u want one with a good bore they'll pick out a good one for an extra $30 bucks, but even after all that your still looking at less than $150 bucks.
That looks amazing! I love the finish you put on that wood handle, it looks so shiny! and to think you can even get a mirror polish on that, wish I had your skills lol. I love how you made this gun into a project and in a way made it your own. Makes it that much special and sentimental. Blood sweat and tears infused into any product is the secret ingredient to any outstanding product :p Great vid, awesome end results/project!
@jeffjuice3886 Thanks bro, I had alot of fun with it, and it turned out better than I thought it would. I love fixing, and tinkering with stuff, and I actually used to refinish guns for extra cash several years ago, forgot how much fun it was!
Great Job dude! Unfortunately I had to do something similar to my M1 Garand. It turned out perfect. I would have preferred leaving it original, but the previous owner did a bad finish job on it so it gave me a fun gun project.
@Rorona550 Well there may be better ways than what I did but I just used Hoppe's solvent and alot of scrubbing, I like to use a medium or hard bristle toothbruth, just dip it in the solvent and scrub, just make sure to take the rifle apart first so u can get all the areas covered in cosmoline. What works really good is using a hard bristle barrel brush sized for a 12 gauge on the chamber, it the perfect size, then a good .30 caliber brush for the barrel.
that is one truly nice rifle. i was thinking about refinishing my springfield 67E 12 ga because i found out that they are not really worth a spit but i couldn't find out how to take it apart so i guess i'm going to be heading to the gunsmith pretty soon
@videoenthusiast23 Yeah it was really easy, and came out better than I thought it would, if u ever get a Mosin (they're dirt cheap) I'll walk u through how to do it.
@crippycrippy I used 200 grit to sand the whole stock down, then used 400 grit to lightly sand inbetween coats of True Oil. Did u ever get that Mosin?
@NeverEnuffAmmo cool.. i have a rem. 870 that i'd like to do that to.. no havent gotten anything lately.. going for the ar next.. but probably after the holidays cuz kids have a long list this year lol
@crippycrippy Oh wow for some reason I was thinking U said something about getting a Mosin ...... lol , Sorry bro, your like the only guy on here I know from B-ville so I was was thinking it was u, I know it was someone local to me, cause they were talking about getting it at Johnny's True Value in Harlingen.
@NeverEnuffAmmo lol yeah i havent bumped into anybody from down here besides you bro.. im sure theres couple of more fellers around.lol.. ohh i remember i had talked to you about the glock 23 or 22.. must of been that.. have u tried masseys range yet?
@crippycrippy No I haven't yet, but I really want to get over there, it's really close to my family's house, I heard they sell year memberships pretty cheap I wanna pick one up. Just between work and everything else I haven't made it over there. I did just find their website about a week ago, but I really wanna take the Mosin and the AK over there, it definitely the closest range to me for rifle shooting.
@NeverEnuffAmmo yeah it is really cheap .. its a good place .. they have couple of different set ups.. i think the longest he has is up to 5 or 600 yards..
youtube fails again! i cant post it as a video response for some reason. i tried to do it and thought it worked but its not showing up here. i tried to re-do it and its not even listing the video in the choose a video part! ill pm you a link.
soooo, i did this about a month or so ago. ive had the video up for a while now but i think ill put the response to here. i used tru oil also and its great.
@NeverEnuffAmmo i did it but it isnt showing up, i ll do it again. ive got like 3 videos showcasing the refinishing job but ill just do they upgrades video because it tells about everything i changed.
Great job! looks fantastic, keep it just like that. Trick out the next one you get. The oil looks fantastic that you applied to it. Do you sand between coats with that?
@tim12161974 Thanks bro, yeah I think I'm gonna leave like this, it looks too pretty to mess with. With the True Oil I lightly sand with a 400 grit inbetween coats, I've seen some people just put on coats without sanding, but it doesn't look as good.
@Lookinformemarbles Yeah I'd love to shine up the bolt, I wasn't planning on doing it because I was going to get a bent bolt, but now that I'm planning on leaving it the way it is I think I'll put a little elbow grease into shining up the bolt.
@Lookinformemarbles Yeah I've seen that guy, in fact I think there are 2 guys doing that on there, that's what I was thinking about doing, I think he was doing it for $39.99 or $49.99
@filo4life11 Yeah, once u get your hands on one, and realize what a great rifle u got for around $100 bucks, u start to wonder why u don't have more of them ..... lol
@txmalcontent Yeah once u get your hands on one, and see how much rifle u get for the money, you'll wonder why u have been buying up every one u see ... lol
Is stock refinishing necessary for lamenated stock?
timewaster6991 1 day ago
@timewaster6991 No, you wouldn't want to refinish a laminated stock, maybe just clean it up good and maybe apply some clear varnish to help seal the stock
NeverEnuffAmmo 1 day ago
Great job! all you need is a lot of elbow greese and patience with this kind of project. I would like to do mine in satin finish. Thanks for the video.
iamsonny7 5 days ago
subscribed!!!! Where did you buy yours I think im going to get one
douglas0929 1 month ago in playlist More videos from NeverEnuffAmmo
Nice job; Looks great. I refinished one the same way. I left the wood its natural color and just put some tung oil on it and knocked down the shine a little with 0000 steel wool. Looks excellent.
79thOVI 1 month ago
@79thOVI Yeah it came out really well, thanks 4 watching
NeverEnuffAmmo 1 month ago
Really nice job on the rifle. Can't really improve on what you did, so I will do the same with mine.
Bought three of them from Cabela's, one is a 1939 Tula, the other two are 1942 Izhevsk. Pretty much in fine shape and nearly identical, but the Tula's butt stock is 3/4" longer and it has metal plates around the sling holes. This one will be mine, the other two will go as gifts to my brother and a good friend. We look to start a small M-N club in S. Louisiana with them.
TheDoug76 1 month ago
@TheDoug76 Well ya'll are gonna have alot of fun with 'em, they're great rifles. Thanks 4 watching
NeverEnuffAmmo 1 month ago
This has been flagged as spam show
@TheDoug76 @ThrowingSpoon help me pleas ei have an issue hwere i can get bolt all assembled perfectly set put it in the decock position the piring pen turns and coumplety out of the cut notches i can fit it perfect again put it in the gun and itll still be slightly off the set notches shood i junk my gun?
cber8860 1 month ago
Great job! Where did you order the butt plate?
915greaser 1 month ago
@915greaser Got it off of ebay
NeverEnuffAmmo 1 month ago
Hey brother first off let me say nice job on the finish. I also bought my first mosin on friday and it was covered in cosmoline. I personally used a Blow Dryer and it took a little less than an hour to get clean. By far the hair dryer is the least time consuming imo.
kcroc44 1 month ago
@kcroc44 Yeah I used a heat gun on a couple tough spots on mine
NeverEnuffAmmo 1 month ago
Really nice!! I just got mine i want to dura coat mine kinda like nutafancy but ireally like this one great job!
dmoreusmc 1 month ago
@dmoreusmc Thanks, glad ya liked the vid
NeverEnuffAmmo 1 month ago
It hardens...M'kay... Mr Garrison.
MEERKATmichael 1 month ago
@MEERKATmichael Oh yes it does!
NeverEnuffAmmo 1 month ago
nice looking gun!
fishblade2 1 month ago
@fishblade2 Thanks
NeverEnuffAmmo 1 month ago
Thanks for posting and sharing and your Mosin Nagant looks really really good. Great Job!
ratagris21 1 month ago
@ratagris21 Yeah it came out looking good, thanks 4 watching
NeverEnuffAmmo 1 month ago
Beautiful gun
bassmaster690 2 months ago
@bassmaster690 Thanks bro
NeverEnuffAmmo 2 months ago
Very good vid. The Mosin looks great. I'm sure they didn't look that nice when they were built.
fatfred74 2 months ago
@fatfred74 Thanks, it came out looking pretty good, I was happy with it. Thanks 4 watching
NeverEnuffAmmo 2 months ago
i keep hearing the trigger pin comes out easily but both my mosins never had that problem.
MrMosinNagant1937 3 months ago
Looks GREAT! You got me so inspired that I can't wait till I order and receive mine! Where do you get "Tru-Oil"? Never heard of it..... (Home Depot, Lowe's?)
Dreemwever 3 months ago
@Dreemwever I get mine from Academy sports or the local gunshop
NeverEnuffAmmo 3 months ago
@Dreemwever Cabelas carries it, search for item IK-212448
gkimminau 2 months ago
Thank you!
djlouiemtraxx 4 months ago
@djlouiemtraxx Thanks 4 watching
NeverEnuffAmmo 4 months ago
When you stained it did you do one side at a time? How did you prop it up while staining it?
djlouiemtraxx 4 months ago
@djlouiemtraxx Ididn't stain it, I used Tru-Oil which just adds a nice shine to the wood and hardens almost like a resin, but I did each coat all at once by hanging the stock up with a wire hanger, I just bent it to go through the mag and screw holes that were empty since I had it disassembled.
NeverEnuffAmmo 4 months ago
Beautiful rifle! I think you've convinced me to do the same thing to mine.
444QUAD444 4 months ago
@444QUAD444 Very cool, its a good way to get your Mosin looking good. The Tru-Oil is great stuff
NeverEnuffAmmo 4 months ago
Looks great. I used 8 coats of tru-oil on mine and I really like the way it turned out. Nice job :) I tried posting a video of mine to this but I'm not sure how to do it?
76Stankfinger 4 months ago
@76Stankfinger Yeah I love Tru-oil, it's great stuff. I just approved the vid response. Thanks 4 watching!
NeverEnuffAmmo 4 months ago
Really really good job
Darkcanyon505 4 months ago
@Darkcanyon505 Thanks, I think it came out pretty well
NeverEnuffAmmo 4 months ago
What grains did you use to sand it?also what does the cosmaline do to the gun? Looks great by the way
TheMHandDSfan 5 months ago
@TheMHandDSfan I started with a 250 grit and moved on to a 400 grit to finish it off. The cosmoline is basically just a preservant that soaks into the wood and metal over time and when the gun heats up when fired it seeps out and can cause problems like jaming up the bolt or the cartridge in the chamber
NeverEnuffAmmo 5 months ago
What grains did you use to sand it? Looks great by the way
TheMHandDSfan 5 months ago
It kinda sticks to the jacket I went back to the steel In combat I what it to silde on and off quickly. But you did a great job, Its a great rifel I have 2 of them one is a finn 1895 from the ruesso-finesh war of 1938/39 they made it in to a sinper dam can it shoot. It shoots almost as well as a wen-model-70 sinper and Im a gunsmith
have fun with it. I put a scope on mine but a very good one have fun later.
RoflmaoAtSheepeople 5 months ago
beautiful rifle, love what you did with it. I had a quick question what did you use to get the shiny finish on the stock, i know you mention it but i cant quite make out what you said. I would appreciate it.
daunderdogg 6 months ago
@daunderdogg It's called "True Oil" by Birchwood Casey. You can usually find it in most gunshops & sporting goods stores, sometimes Walmart even has it
NeverEnuffAmmo 6 months ago
@NeverEnuffAmmo thanks for the reply, helps a lot. By the way i forgot to ask if you had cleaned the stock beforehand or did you not need to?
daunderdogg 6 months ago
@daunderdogg I just sanded the stock before applying the True Oil
NeverEnuffAmmo 6 months ago
lol shiny stock are very nice but the second you put a tiny ding in it!
xxuncexx 8 months ago
cool
175yam1 8 months ago
@175yam1 Thanks bro!
NeverEnuffAmmo 8 months ago
Is there an easy way to tell if it was a sniper rifle?
Alwayscarry1 10 months ago
Where can I get the rubber butt for the stock??? Also the ring clips for the forestock?? My son is in the process of refinishing his Mosin because he saw your video.Also would you do anything different?
Alwayscarry1 10 months ago
@Alwayscarry1 The rubber buttpad u can get at most gun supply online stores everything from cheaperthandirt to ebay, I got mine on ebay they had the best price. As for the rings, not sure, would probably have to google it and see who has 'em, I know I've never seen a set without the stock. I've always wanted to do a more tactical mosin, pout on a synthetic black stock, bent bolt handle scope & mount, cut down the barrel, but I'd onlly do that to a mosin in bad shape, otherwise keep it original
NeverEnuffAmmo 10 months ago
@Alwayscarry1 Check this wesite out, it should help u determine if yours is a former sniper ....
russian-mosin-nagantDOTcom/sniper_9130DOThtml
NeverEnuffAmmo 10 months ago
Where can I get the rubber butt for the stock??? Also the ring clips for the forestock?? My son is in the process of refinishing his Mosin because he saw your video.
Alwayscarry1 10 months ago
is ammo for this gun expensive
hulkbuster1026 1 year ago
@hulkbuster1026 Not at all, I usually order it online, I buy 440 rounds ammo cans for around $80 to $90 bucks depending on where I order.
NeverEnuffAmmo 1 year ago
Just pick up a 91/30 today, saw you vid on dis-assembly which will be a big help, and that turned out beautiful I hope my looks half that good. Btw where did you get that butt pad? Will be using mine as a deer rifle
tschuler3 1 year ago
@tschuler3 I got the buttpad on ebay, can't remember the seller, he was offering the buttpad & the pack of 5 stripper clips for $15 plus free shipping, was a pretty good deal. Glad the vid helps, they're great rifles, but sometimes people either just don't want to or are affraid to take apart old milsurp rifles, seen too many good rifles fall apart because they never were cleaned or repaired because people were concerned about "keeping it original" I say for $125 dollar rifle have fun with it.
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo Thanks for the quick response, I got mine for $97.41out the door at a gun show my dad got one a month ago for a little over $100 a couple months ago and have been wanted one almost as soon as I saw it. I don't get people wrapped up on original, on these guns, others I could see I want to rebuild mine to suit my purpose not the Soviet Army's.
tschuler3 1 year ago
@tschuler3 Yeah they're great to just do whatever u want with, for the money they're great to even experiment on and see what u can make of it. This one I have now I just wanted to refinish the stock and keep it fairly stock but with a couple updates, but I want to get another one, and make a "Tactical Mosin" just for the hell of it.
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo Just confirmed payment on my pad and stripper clips from redbirdgunparts on ebay, I was going to put an ATI stock on it but I think Im just going to put a scope on it and leave it alone. Im considering an SKS with a dragonov stock for a fighting rifle. That one will have to wait a little while I gotta get my wife a .380 bersa and my self a .22 pistol for gator control when I go fishing in South East Texas
tschuler3 1 year ago
@tschuler3 Yeah u should wait till the next Mosin to put the ATI stock on .... lol
SKS is a great rifle, all around a good rifle for defense plus it's capable of using for hunting if u needed to, definitely worth having one in the collection.
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo yeah Im wanting an SKS bad I saw a few at the show today and had too walk away reluctantly I hate budget's lol
tschuler3 1 year ago
@tschuler3 I know what u mean, I was at a gun show today too, down here in South Tx, and had to restrict myself alot more than I wanted to.
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo I had about $150 budget for this trip got my gun some beef jerky and some fudge for my wife lol
tschuler3 1 year ago
@tschuler3 Sounds like a good deal for everybody all around ..... lol
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo yeah it was a pretty good trip my dad even got some things for his aristica 7.7 jap rifle, bayonet and aircraft sights
tschuler3 1 year ago
@tschuler3 Does it still have the mum?
tfoshohoe 1 year ago
@tfoshohoe on the aristica, yes its there but was half assed ground off so yes and no
misslindzy 1 year ago
@tfoshohoe the misslindzy comment was mine didnt realize I was logged on to my wifes account lol
tschuler3 1 year ago
@tschuler3 SUUUUUURRE haha.yeah mine also bummer=(
tfoshohoe 1 year ago
@tschuler3 oh hey not being rude but its arisaka=)
tfoshohoe 1 year ago
Man you did a outstanding job best mosin i have seen
tfoshohoe 1 year ago
@tfoshohoe Thanks alot bro, glad u liked it, it definitely came out better than I thought it would!
NeverEnuffAmmo 1 year ago
Have you gotten it out to the range yet? I was curious about sight adjustment, I have read a couple things online about taking the front sight assembly off and drilling a hole them replacing the pin with a set screw any thoughts on this?
LivebytheSig 1 year ago
@LivebytheSig Haven' gotten it to the range yet, what I've heard is that if your going to use iron sights, and the front post is still in it's original position from the russian armory that it should be left alone, but again, who really knows, it's going to depend on the rifle, some of the old Mosins were more accurate than others & may have been sighted in better as well. The set screw option is probably a viable option, this particular one I'm wanting to leave original except for refinishing
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo it looks great anyways, I did that with my Yugo sks, the only difference i did was I took a wood burner and burned the serial number in the side of the stock. I am considering doing a video of it soon (as soon as I can get a video camera) because I havent seen any on this. It is a very accurate weapon. I will let you know when its up so you can take a look at it. Thanks again for the vids and keep them coming.
LivebytheSig 1 year ago
@LivebytheSig No problem bro, and definitely let me know when u get the vid up!
NeverEnuffAmmo 1 year ago
Looks bad ass bro... great job!
GunznPoker 1 year ago
@GunznPoker I appreciate it bro, it came out better than I thought it would!
NeverEnuffAmmo 1 year ago
Very Nice, looks beautiful.
OilTheGun 1 year ago
@OilTheGun thanks alot bro!
NeverEnuffAmmo 1 year ago
Who, and why would someone "dislike" this?
jackmeoffer 1 year ago
@jackmeoffer I have someone (don't know who it is) who watches all my vids just to give them a thumbs down. They've been doing it since mid summer, I don't know who it is, or why they don't like me, but whoever they are they're at least giving me a view for the vid, and they do it so soon after I put the vid up that they have to be subbed to me to know I put up a new vid, so I don't care ..... lol
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo Your Mosin project has me thinking I want to do one. Any tips on where to buy one? This summer I would see them at gun shows, but was not interested then. Now I think it would be a great winter project to get one cleaned up. Let me know if you have any suggestions.
jackmeoffer 1 year ago
@jackmeoffer Yeah definitely gun shows are the best place to get them, cause you'll usually get the best price there, other than that order one online from jgsalesDOTcom u can get one for $79.99 , now u have to pay for shipping and an FFL transfer fee to have it sent to an authorized FFL in your area to pick it up, and if u want one with a good bore they'll pick out a good one for an extra $30 bucks, but even after all that your still looking at less than $150 bucks.
NeverEnuffAmmo 1 year ago
That looks amazing! I love the finish you put on that wood handle, it looks so shiny! and to think you can even get a mirror polish on that, wish I had your skills lol. I love how you made this gun into a project and in a way made it your own. Makes it that much special and sentimental. Blood sweat and tears infused into any product is the secret ingredient to any outstanding product :p Great vid, awesome end results/project!
jeffjuice3886 1 year ago
@jeffjuice3886 Thanks bro, I had alot of fun with it, and it turned out better than I thought it would. I love fixing, and tinkering with stuff, and I actually used to refinish guns for extra cash several years ago, forgot how much fun it was!
NeverEnuffAmmo 1 year ago
Nice work! I like to finish off with some 0000 steel wool to give it a satin finish, but the gloss really looks good on a Mosin.
ODgr33n 1 year ago
@ODgr33n Thanks alot bro, I really was suprised it came out looking as good as it did!!
NeverEnuffAmmo 1 year ago
Great Job dude! Unfortunately I had to do something similar to my M1 Garand. It turned out perfect. I would have preferred leaving it original, but the previous owner did a bad finish job on it so it gave me a fun gun project.
CampfireTalk 1 year ago
@CampfireTalk Yeah I love gun projects, this is the first one I've done in about 2 years, so it was alot of fun!!
NeverEnuffAmmo 1 year ago
Very cool! ★★★★★
DocTacDad 1 year ago
@DocTacDad Thanks bro!!
NeverEnuffAmmo 1 year ago
Lookin' good, man! Nice!
DemonHide 1 year ago
@DemonHide Thanks, it came out better than I thought it would.
NeverEnuffAmmo 1 year ago
Mosin Nagants rule!!!
sailingmanuel 1 year ago
@sailingmanuel Yeah I love 'em, can't beat 'em for the price!
NeverEnuffAmmo 1 year ago
Tactical Mosin sounds awesome .
TheGunGarage20 1 year ago
@TheGunGarage20 Yeah I'm hoping to pick up another Mosin at the next gun show coming up to start making a "Tactical Mosin"
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo Sweet, loocking foward to it !
TheGunGarage20 1 year ago
☆☆☆☆☆
007TheReaper007 1 year ago
@007TheReaper007 Thanks bro!!
NeverEnuffAmmo 1 year ago
@SOFSEC1 LOL ....... yeah I know what u mean, at least the good thing is u can pick one of these up for around $100 bucks!
NeverEnuffAmmo 1 year ago
great end result, looks fantastic, good work matt
thomassmyth65 1 year ago
@thomassmyth65 Thanks alot bro, it turned out pretty good!
NeverEnuffAmmo 1 year ago
that is one fine looking mosin, great job if and when i finaly get a mosin i will use the same finish as you used it looks awsome.
ICWWEVERYDAY 1 year ago
im getting mine tomorrow whats the best way to take off the cosmoline
Rorona550 1 year ago
@Rorona550 Well there may be better ways than what I did but I just used Hoppe's solvent and alot of scrubbing, I like to use a medium or hard bristle toothbruth, just dip it in the solvent and scrub, just make sure to take the rifle apart first so u can get all the areas covered in cosmoline. What works really good is using a hard bristle barrel brush sized for a 12 gauge on the chamber, it the perfect size, then a good .30 caliber brush for the barrel.
NeverEnuffAmmo 1 year ago
@videoenthusiast23 Yeah the cheapest I've seen 'em is $69 but that's rare.
NeverEnuffAmmo 1 year ago
that is one truly nice rifle. i was thinking about refinishing my springfield 67E 12 ga because i found out that they are not really worth a spit but i couldn't find out how to take it apart so i guess i'm going to be heading to the gunsmith pretty soon
duemamay 1 year ago
@duemamay Well if u get it fixed u should definitely make a project out of it, should like it'd make a fun project.
NeverEnuffAmmo 1 year ago
Nice finishing job on the stock Matt, it looks wet, beautiful :)
GUNeRAG 1 year ago
@GUNeRAG Thanks bro, it really came out good, alot better than I thought it would!
NeverEnuffAmmo 1 year ago
looks gorgeous
YokoWenis 1 year ago
@YokoWenis Thanks bro!
NeverEnuffAmmo 1 year ago
Looks beautiful man!
DangerousDude2010 1 year ago
@DangerousDude2010 Much appreciated bro, it came out better than I thought.
NeverEnuffAmmo 1 year ago
man thats sweet! made a cheap gun look expensive.
INTOGUNS1 1 year ago
@INTOGUNS1 Yeah it looks pretty good, thanks 4 watchin bro!!
NeverEnuffAmmo 1 year ago
Wow...that stock looks really nice. Good job!
qwikslvr74 1 year ago
@qwikslvr74 Thanks, I was happy with the results!!
NeverEnuffAmmo 1 year ago
You did a excellent job on the stock, Really looks good. Can't wait to see it in action.
biguy525 1 year ago
@biguy525 Thanks bro!!
NeverEnuffAmmo 1 year ago
@videoenthusiast23 Yeah it was really easy, and came out better than I thought it would, if u ever get a Mosin (they're dirt cheap) I'll walk u through how to do it.
NeverEnuffAmmo 1 year ago
Wow, that really turned out nice! Great job. Beautiful rifle.
glynn72 1 year ago
@glynn72 Thanks alot bro, it turned out better than I expected.
NeverEnuffAmmo 1 year ago
looks good mat! what grit of sand paper did you use?
crippycrippy 1 year ago
@crippycrippy I used 200 grit to sand the whole stock down, then used 400 grit to lightly sand inbetween coats of True Oil. Did u ever get that Mosin?
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo cool.. i have a rem. 870 that i'd like to do that to.. no havent gotten anything lately.. going for the ar next.. but probably after the holidays cuz kids have a long list this year lol
crippycrippy 1 year ago
@crippycrippy Oh wow for some reason I was thinking U said something about getting a Mosin ...... lol , Sorry bro, your like the only guy on here I know from B-ville so I was was thinking it was u, I know it was someone local to me, cause they were talking about getting it at Johnny's True Value in Harlingen.
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo lol yeah i havent bumped into anybody from down here besides you bro.. im sure theres couple of more fellers around.lol.. ohh i remember i had talked to you about the glock 23 or 22.. must of been that.. have u tried masseys range yet?
crippycrippy 1 year ago
@crippycrippy No I haven't yet, but I really want to get over there, it's really close to my family's house, I heard they sell year memberships pretty cheap I wanna pick one up. Just between work and everything else I haven't made it over there. I did just find their website about a week ago, but I really wanna take the Mosin and the AK over there, it definitely the closest range to me for rifle shooting.
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo yeah it is really cheap .. its a good place .. they have couple of different set ups.. i think the longest he has is up to 5 or 600 yards..
crippycrippy 1 year ago
@crippycrippy Yeah I really got to get up there soon.
NeverEnuffAmmo 1 year ago
@MrKatphish Thanks bro!!
NeverEnuffAmmo 1 year ago
@TheAmericanprepper Yeah I really like it, the more I look at it, and hold it the more the butt pad grows on me.
NeverEnuffAmmo 1 year ago
youtube fails again! i cant post it as a video response for some reason. i tried to do it and thought it worked but its not showing up here. i tried to re-do it and its not even listing the video in the choose a video part! ill pm you a link.
mxf7010g8k 1 year ago
@mxf7010g8k It's working now.
NeverEnuffAmmo 1 year ago
soooo, i did this about a month or so ago. ive had the video up for a while now but i think ill put the response to here. i used tru oil also and its great.
mxf7010g8k 1 year ago
@mxf7010g8k Yeah cool bro, definitely attach it to this vid, I'd love to see it!!
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo i did it but it isnt showing up, i ll do it again. ive got like 3 videos showcasing the refinishing job but ill just do they upgrades video because it tells about everything i changed.
mxf7010g8k 1 year ago
Wow I am going to have to try some of that Tru-oil. So nice and shinny!
Mrcaffinebean 1 year ago
@Mrcaffinebean Yeah it works really well, I love that stuff, the more u use the better it looks!
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo I'm definitely using on my next gun project it makes that Mosin stock look nice. If/When I do I'll attach it as a response vid.
Mrcaffinebean 1 year ago
Great job! looks fantastic, keep it just like that. Trick out the next one you get. The oil looks fantastic that you applied to it. Do you sand between coats with that?
tim12161974 1 year ago
@tim12161974 Thanks bro, yeah I think I'm gonna leave like this, it looks too pretty to mess with. With the True Oil I lightly sand with a 400 grit inbetween coats, I've seen some people just put on coats without sanding, but it doesn't look as good.
NeverEnuffAmmo 1 year ago
Looks great! Take some Flitz to that Bolt! Will make it PoP!!
Lookinformemarbles 1 year ago
@Lookinformemarbles Yeah I'd love to shine up the bolt, I wasn't planning on doing it because I was going to get a bent bolt, but now that I'm planning on leaving it the way it is I think I'll put a little elbow grease into shining up the bolt.
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo There is a guy on ebay if you send your bolt he will bend it and send it back!
Lookinformemarbles 1 year ago
@Lookinformemarbles Yeah I've seen that guy, in fact I think there are 2 guys doing that on there, that's what I was thinking about doing, I think he was doing it for $39.99 or $49.99
NeverEnuffAmmo 1 year ago
Looks Great Matt!!!
MadBadVoodo 1 year ago
@MadBadVoodo Thanks alot bro!
NeverEnuffAmmo 1 year ago
She looks nice! I love mosins.
filo4life11 1 year ago
@filo4life11 Yeah, once u get your hands on one, and realize what a great rifle u got for around $100 bucks, u start to wonder why u don't have more of them ..... lol
NeverEnuffAmmo 1 year ago
Looks really nice dude. Good work:)
xxFRANKENZTEINxx 1 year ago
@xxFRANKENZTEINxx Thanks bro, it came out better than I expected.
NeverEnuffAmmo 1 year ago
★★★★★
MadBadVoodo 1 year ago
she is a beauty! I want one to restore probaly a M44 or a M38. I want a 91/30 to build.
willwood487 1 year ago
@willwood487 Yeah I really want to get my hands on a M44, would love to clean one of those up like I did this one!
NeverEnuffAmmo 1 year ago
Very cool!
ristin59 1 year ago
@ristin59 Thanks bro!
NeverEnuffAmmo 1 year ago
cool vid man
pjicleanair420 1 year ago
@pjicleanair420 Thanks 4 watchin!
NeverEnuffAmmo 1 year ago
Wow that is a nice looking rifle. I need to get a Mosin. Can't beat it for $100
txmalcontent 1 year ago
@txmalcontent Yeah once u get your hands on one, and see how much rifle u get for the money, you'll wonder why u have been buying up every one u see ... lol
NeverEnuffAmmo 1 year ago
Amazing look,very nice job! Sweat dont cost much, but what a great finish!
cadrician 1 year ago
@cadrician Yeah it came out really nice, alot better than I thought it would. Thanks 4 watchin bro!!
NeverEnuffAmmo 1 year ago
Sarco bent sniper bolt...srsly, even if your not going to scope the rifle, it makes life so much easier shootin your nugget
DaytonaRoadster 1 year ago
@DaytonaRoadster Yeah the bent bolt is really something that just makes it so much better, that straight bolt really takes awhile to get fast with.
NeverEnuffAmmo 1 year ago
@NeverEnuffAmmo ya, its also is harder to use since u get less leverage
DaytonaRoadster 1 year ago