Mauser SR - Trigger Disassembly - Reassembly {Type 96 (L96)}

[tklondis10]

cut your nails

[808Kameleon]

@MIKADOOFTW I will sens you a few links in your inbox for a metal replacement.....

[GAGHUNF]

i have disassembly my trigger box how in your video but when i would reassembly it, i see that i have a other triggerbox then you... now i dont know how to reassembly -_-

[808Kameleon]

@GAGHUNF Is your trigger box rectangular or is it more triangular? Wider on one end than the other? And my trigger assembly box is a KM brand trigger assembly. A little different than stock, especially the top spring that control the sear.

[GAGHUNF]

@808Kameleon this is my trigger box (all is normal: Well L96)

here is a link of my: htt p://in dividual.utoronto. ca/aznpos531/Airsoft_trigger_a­ssembly_labeled 2.jpg

(without space)

[808Kameleon]

@GAGHUNF The link is ineffective. I couldn't connect. Copy, then paste in my INBOX message, since YouTube doesn't allow links on public message. I need the "w- w - w dot"

[GAGHUNF]

@808Kameleon h t t p://individual.utoronto.ca/azn­pos531/Airsoft_trigger_a­ssemb­ly_labeled2.jpg

[sfascafwfasvwqfq]

@GAGHUNF

Can u pleas tell me where can i get one of this trigger mechanisms in europe?

[thewalker7878]

Will you send me a link for the trigger assembly at jeremytwalker@ live.com

[ECHO7AIRSOFT]

@thewalker7878 there is a video response that says "Airsoft L96 plastic vs metal trigger assembly. check that out i have 2 store links. thanks!

[GAGHUNF]

i think you are good in softair parts but i have a problem pls help

this is my problem: /watch?v=L8YrzgvU4Is

THIS IS NOT MY VIDEO I ONLY SHOW YOU MY PROBLEM

pls help me

[808Kameleon]

@GAGHUNF Broken trigger assembly. A VERY common problem. Sending you store links for a replacement.

[GRUxGUNZ]

Is there a place where I can buy the metal shell of the asembly? And will it fit the UTG MK96?

[808Kameleon]

@GRUxGUNZ Yes! I will send you links to your inbox.

[GRUxGUNZ]

@808Kameleon Cool!

[JerFish12]

very nice vid

[123chucke]

Please mark you videos with (airsoft) it is very annoying when you have your hands covered with cosmoline to click on a damned airsoft video.

[ken15ian]

where you buy it ?????

[808Kameleon]

@ken15ian Tokyo Model in Hong Kong for $208.00. But I believe it is discontinued. X-Fire in Japan has the somewhat new PDI metal trigger for around $160.00.....

[imgod123100]

Thank u. Thnx to u I fixed my gun

[ECHO7AIRSOFT]

What camera do you use?

[808Kameleon]

@ECHO7AIRSOFT I started out with a Canon PowerShot A590. But that one jammed during our twin waterspout (look like TWO tornados from where I seen it form and dissipate....).

So I ran in the rain during a thunderstorm to RadioShack and got me a smaller Canon PowerShot A495, since anyting similar was not available. ;(

[quallen1]

hey is there another place that has metal gear boxes that will fit a well mb-05

[808Kameleon]

@quallen1 I have five store links you could try. These CONSTANTLY get sold OUT!  I mean, once it comes in, it flies out of their warehouse, and become sold out again.

Uh... are you willing to spend a little over $150.00?

[quallen1]

@808Kameleon 150 for just a metal trig or the whole gun?

[808Kameleon]

@quallen1 Just the metal trigger! It is cheaper than the $208.00 one you see on this video... and it is all sold out!

[quallen1]

@808Kameleon when does it usually cone in. on a website it has this gear box but it says unknown for the in stock section?

[808Kameleon]

@quallen1 If you ordered within the United States, it should rrive to your door within 7 days. Grom Hong Kong, it is around 8 - 17 days, depends. Did you order from one of the fve links I sent you?

[quallen1]

@808Kameleon yes i did i think i got one

[LatinoSoulja1]

hey where did u get this trigger box can u send a link plz

[808Kameleon]

@LatinoSoulja1 This K2 all metal trigger assembly is NO LONGER AVAILABLE! ;(

But I will send you a links for the somewhat new PDI all metal trigger assembly. Buy it from Japan, because Hong Kong adds about $40.00 more to the cost of this new PDI tigger assembly. Will be sending you the link now.....

=D

[LatinoSoulja1]

@808Kameleon ok thank you very much :)

[best220166]

thx



[mattb807]

@808kameleon yes

I do i dont wanna spend the money on the zero trigger and the one manafactured by WELL has been spuld oit everywhere for a while but lyramid air said they were restocking april 29 but i doubt it do u have a old metal trigger or something u can sell

Me

[808Kameleon]

@mattb807 Yeah... the $22.00 one is all sold out, and as soon as the shops get them in, it literaly flies out their warehouse! That is why I offer my viewers multiple links.

You just have to keep trying.

I had MANY request from my other viewers if i have parts or an old trigger assembly to sell. Mines dintergrated in dozens of peices!! Well, the plastic box did. The K2 I have, is STILL intact and working after 2 years, and that cost me $208.00 without shipping!

[mattb807]

Hey if i bought a pdi trigger sear part 1 and a k2 trigger sear part 2 and put them in the stock one. Will it work

[808Kameleon]

@mattb807 Do you have the original PLASTIC trigger assembly box? If you do, you will end up wasting your money! The plasitc trigger box will eventually break regardless if you have the stock sears or the up-graded sear. I would save money and get the pre-made ones instead: the METAL box trigger assembly.

Parts-wise, what you see on-line will be compatible to the original Maruzen Type 96. The clones (Cybergun, WELL, UTG, AGM, etc.) will accept the parts you mention, but the box will break!

[Nuk3Fish]

there is a piston that is for type 96 would it work on the sr pro since it is a 96 system

[808Kameleon]

@Nuk3Fish YUP! ANY brand made for the Maruzen Type 96 WILL fit, as ANY brand of the L96 clones are... well CLONES of the Maruzen Type 96. Only ones I would know much about are the ones that uses the odd trapazoidal shape trigger box.

Be wary of the after market stand-alone piston uses the 9mm spring and spring guide.

[Nuk3Fish]

is there anyway on the SR pro to take the bolt out without splitting the gun in half?

[808Kameleon]

@Nuk3Fish Yes. The pin on the bottom inside of your trigger well, right before your trigger. Use your thumb and finger to push it down, then pull out your bolt. But remove your cheek-rest FIRST!

[Nuk3Fish]

@808Kameleon but the only thing is that i have the SR pro Tatical from cybergun and the construction of the trigger guard is different. its that same exact pin but i believe that the trigger guard restricts me from pulling it down all of the way

[808Kameleon]

@Nuk3Fish Is there a square hole right below the pin ON the trigger guard?

[808Kameleon]

@Nuk3Fish I just check some on-line photos, and it MIGHT be possibly to drill and file a square hole to accomidate the pin to be released down.

[nickliewwc]

spring powered?

[veez914]

hey, so i see you had the same problem as i did (cracked my trigger assembly)

when yours cracked would the bolt charge back but the spring wouldnt compress and stay back? im trying to find out if theres other things i need to replace other then the trigger assembly

[808Kameleon]

@veez914 The weakest pont is the pin that goes through the piston sear. I once had it held together by KRAZY GLUE until I had no parts left to glue! There are upgraded (EXPENSIVE) trigger assembly you could buy, and there are e-shops selling METAL trigger assembly for around $22.00. There are also upgrade kits you can buy (metal piston, metal spring guide, stronger spring) that canadd more punch to your rifle, and slightly longer range.

[VELFARRECLUBBA]

great video with great angles. I see in the description that the trigger box is a whopping $200+! do you know or recommend anything in the $50's to $100 range? thanks so much.

[808Kameleon]

@VELFARRECLUBBA YES! This trigger assembly was $208.00 withOUT shipping! But now it is all sold OUT! Possibly discontinued!

Depending on WHAT type of up-grades you are going to do, you can start with the metal box trigger replacement for $22.00, and I didn't see any triggers for $50.00 - $100.00... And if YOU did, you can post it on your channel, make a video of those triggers, and you can have MANY viewers waching your video and Subscribing to you!

=D

[Wehoo91]

Hi there my name is Tommy, I just wanna say tank you very much i had som serious issues with assembly the springs next to the sear :) ty for the help :):):):))

[FreeRunCentral]

Okay, thanks, might just go for the 120-130 spring to be safe,.

[FreeRunCentral]

Thanks, I know it won't handle most upgraded springs, but can it handle a 150-170? That's all I really need for now... Thanks

[808Kameleon]

@FreeRunCentral Not 100% sure. I just provide the links to those who needs a replacement trigger. My K2 could handle a 210, but my K2 SPRING GUIDE couldn't handle the spring. You just have to use good judgement as to what about $23.00 can do for you and be able to handle....

[FreeRunCentral]

I just bought my sniper, so I'm don't have the best budget, do you know of a trigger box that will withstand and upgraded spring, but isn't off the charts? Like from 20-50? Thanks

[808Kameleon]

@FreeRunCentral OK. That would be a $22.00 drop-in replacement that is a metal version of the cheap plastic one. That is the one that my viewers were requesting a link for. I will send you the links to FIVE e-shops that carries it. ALL shops are sold out, and many of my viewers placed themselves on the waiting list.

[808Kameleon]

@ericlebronjamez This K2 trigger assembly is now possibly discontinued! Someone bought the last one last week! But it was $208.00 U.S. Dollars! I will send you a link to a just released PDI trigger assembly directly from JAPAN. Cost is around $143 U.S. Dollars, and that is withot shipping cost to the Netherlands. Need to cantact e-shop if they will ship to the Netherlands. Will send link to your inbox.

[AirsoftSniper2145]

@808Kameleon could you possibly send me the link to

[stealthyairsoft996]

stock my bolt wont click or lock when i pull it back it slides forward is this what I need to buy?

[808Kameleon]

@stealthyairsoft996 OK. It MAY be a broken trigger, as I have NUMEROUS request for a new trigger. I started out giving the exact replacement trigger links, but found out that they now make a durable metal trigger box and assembly! So I will give to you five e-shops links, because they are ALL sold out. You can try different shops to PRE-order. I will give you the links in your inbox, since YouTube doesn't allow links on open comments.

[stealthyairsoft996]

where can I buy a New trigger box for well l96

[808Kameleon]

@stealthyairsoft996 Do you want a stock metal replacement, or the more expensive upgradedones?

[porcoclero]

...Me too , I'm another one with a broken trigger box could you send me the links also??

thanks!

[lugi3232]

hey, if you could send me the link to the metal trigger mech.

that'd be great... thanks

[808Kameleon]

@lugi3232 WELCOME to YouTube! I will send you links to both the $23.00 and the $208.00 trigger assembly in your inbox. YouTube does not allow links in public comments.

[lugi3232]

@808Kameleon alright thanks so much!

[lugi3232]

@808Kameleon alright thanks soo much! you've reallly helped me out.. okay, well i dont want to be 208 for a trigger assembly so im buying the cheaper one. but on all those 3 links you gave me .. all they metal interiour and exterior?

[urokjg]

@808Kameleon Would you please end me the same links?

[808Kameleon]

@urokjg Sure can do! I will send you the links in your inbox. YouTube won't allow links on public messages.....

[kyleplace92]

srry to bother you man but I'm another one with a broken trigger box could you send me the links also?? thank you.

[808Kameleon]

@kyleplace92 Already sent you links to the new metal trigger assembly.

All others, please note: Because the L96 variant rifles (Mauser, Cybergun, WELL, UTG, AGM, TSD, Tercel) are so POPULAR, and ALL these rifles have the SAME CHEAP PLASTIC trigger boxes, ALL e-shops are sold out internationally as of this writing! So I will provide you the links, and you have to PRE-order.

[zombiepa666]

can someone please send me a link... i really dont want to pay all that money, or buy a new gun...

[808Kameleon]

@zombiepa666 I'll send you links to both the cheap plastic replacement and the new metal low cost replacement.

[l96shooter]

where can i buy a new trigger box

[808Kameleon]

@l96shooter I'll send you links for both the cheapo plastic replacement and the new metal one. IF you can afford this $208.00 one, I can do that to.

[Hrapo1Era]

I no ur sick of this question but will u send me a link too. I really dont want to pay 200 dollars.

[808Kameleon]

@Hrapo1Era Will do! Note to others. I have links to a direct replacement that cost around $14.08 (average). BUT they are now out of stock all over! Because i suggest you buy three (3), because these WILL break again!

[mckaigfun]

can someone please send me a link where i can buy a type 96 trigger. I dont care even if its homemade i just need one.

[808Kameleon]

@mckaigfun That would be me again. This is a MAJOR problem for all L96 clone owners. The Chinese manufacturer used the wrong type of plastic to make the trigger boxes. Evenof you left your rifle stock with no upgrades, the trigger box WILL break! I will send you links for replacement in your INBOX.

[ShotgunTM4204]

Can someone please send me links for the simple trigger box....would be very helpful...seems to crack pretty easy but $200 is just a little too much.

[808Kameleon]

@ShotgunTM4204 That would be me. I will send you links to your inbox. ALL American e-shops are SOLD OUT right now. I will send you the American and one Hong Kong e-shop links.

[motocrosser491]

can u please send me the link for that trigger box it would be a life saver thanks

[808Kameleon]

@motocrosser491

OK. Will do. I trust you simply want the replacement, and not the very expensive up-graded ones. Most stores that sells the replacements are all sold out. I will just send you the links in your "inbox" and see which e-shop has one available.

[vladutzu86]

can u please send me the sketch of the aluminium model ...so i can do it easier on a CNC machine...thanks

[peepoole]

hey theres a problem . well i think there is the peice that you pulled out that took u lots of force gets loose and comes off slowly do u noe whats the problem and also what can be a problem with my gun, Most of the time thhe bbs dont really go to straight and i looked at my hop up and its at mininum can it be i have tuy a new barrel and hop up? thank you

[808Kameleon]

@peepoole That would be the trigger sear connector bar. The camera and tripod was in my way, making it difficult to see straight down at what I was doing!

If you have a stock hop up and inner barrel, it could be as simple as a dirty inner barrel, or a small scratch INSIDE the inner barrel. It is not a good idea to re-use a pellet that was shot out previously. Try and clean your inner barrel, and fire more shots after cleaning. And does your pellets NOT fly straight up & down or L& R?

[peepoole]

@808Kameleon well it depends every day it goes difrently lol but if theres a scratch what do i do? buy a new barrel . but this one simple question uhm is my gun broken because my bbs dont go straight?

[808Kameleon]

@peepoole It could be a LOOSE inner barrel. Tighten that allen nut in the hop-up chamber. Also, check your inner barrel by shining a flash light on the opposite side of the barrel, and look into the barrel. Check for crud, dust, and if you can find any scratches. If there are scratches, it is time to buy a new inner barrel.

[peepoole]

@808Kameleon oh ok

[peepoole]

@808Kameleon acculy what il do is make a video ans show u what it does bbut itl be on my difrent account kk acdc1wow2

[peepoole]

@808Kameleon and also theres a peice that u unscrew for the hop up to more or less well that screw got unscrewed ;o

[808Kameleon]

@peepoole Hmmm..... I actually use thread lock (Tamiya Thread Lock) on all my screws. I brought my rifle to our airsoft battle field, and was surprised that even I made my screws TIGHT, my scope nearly fell off, and other parts became LOOSE! So now, I thread-lock EVERYTHING.

I will check your video. Inform me when it is up-loaded.

[peepoole]

@808Kameleon oh ok well the screw didnt really fall off by it self it was acculy me that took it off ok, on the video il show u what screw and i will inform you thank you

[808Kameleon]

@peepoole OK. I will be waiting for your video. I'll carry on from there!

[deltawhitefan]

hey, i have a well mb05 and my trigger box cracked in half! Can you please tell me where you got yours? Thank you.

[808Kameleon]

@deltawhitefan OK. The WELL MB05 is the same as the Mauser Protactical. I will send you the links in your inbox.

[MuffinMannTV]

hey my l96 trigger box shattered and everything inside is broken can u send me a link to buy a trigger box? thank youu

[808Kameleon]

@MuffinMannTV OK. NO problem! I will send you multiple links in your inbox in case one e-shop still don't have it, while another one will !

=D

[MuffinMannTV]

@808Kameleon thank you sooo much ima suscribing thxx soo muchh

[jordanBAMAmiller345]

where did you get a meatel trigger assembely

[808Kameleon]

@jordanBAMAmiller345 This metal trigger assembly ALONE will cost MORE than the cost of your rifle, and shipping cost! THIS one cost me $208.00 withOUT shipping cost! And only one store in the world sell this particular trigger assembly. Toyko Model shop out in Hong Hong. IF you think you can afford this, send me a personal message and I will give you the store link.

Did you try the other links for the plastic replacement I sent you?

[LuGiank]

my Ace of Spades mauser SR trigger is broken, it is like the one in the video.

where can i purchase one?

[808Kameleon]

@LuGiank This trigger assembly I got IS the most expensive! It cost $208.00 withOUT shippping! YouTube will not allow links in public messages, so I will give you the link in your inbox.

[jordanBAMAmiller345]

my l96 trigger assembely broke where can i buy a new one

[808Kameleon]

@jordanBAMAmiller345 I will send you the links in your INBOX. Some e-stores MAY have them in stock right now, but people are snatching whatever they sell right out of the warehouse!

[teamshameclan]

hey can you please send me the link to because mine just shattered not two weeks ago and cant find one thx

[808Kameleon]

@teamshameclan Will do! I will send you the replacement ($11.00 - $13.00), and the more expensive upgraded ones ($185 - $208.00) in your inbox.

[808Kameleon]

@TheChannelCuz Will do! In your Inbox.....

[ViperIceTea]

heyho,

can you send me the link to my inbox too please? i need the complete trigger system. mine is broken :(

thanks (:

[808Kameleon]

@ViperIceTea Will do! I will give you multiple links to a "direct replacement:, as well as the upgraded ones!

[videkiman1234]

hey can you also send me a link to my inbox for the metal trigger box please?

[blackwolf6733]

hey can u send me the link cuz my gear box is falling apart....

[808Kameleon]

@blackwolf6733 Did I give YOU a link? YouTube screwed up with my message notifications!

[blackwolf6733]

@808Kameleon yea thnx i got it

[Bgelzer161]

hey can you also send me a link to my inbox for the metal trigger box please?

[808Kameleon]

@Bgelzer161 Will do!

[deathsquad53]

Can you please send me the link for the metal trigger,

[808Kameleon]

@deathsquad53 I sure will! There is only ONE store to my knowledge that sells the one I videographed here. I will send you the link in your inbox.

[deathsquad53]

@808Kameleon

thank you

[TomBart33]

thank you!!!!!

[rustedaway36]

hey can you send me the link to get one of those metal gearboxes?

[808Kameleon]

@rustedaway36 Will send links to your inbox, since YouTube doesn't allow links on live comments.....

[rustedaway36]

hey i cant find anywhere to get a metal one. can you sent me the link to plz? my gearbox keeps breaking..thanx

[a100nick]

i need to no were to buy the metal trigger box mine broke

[808Kameleon]

@a100nick YouTube will not allow links on viewers channel. I will send you the link in your inbox.

[trotlo1]

@808Kameleon man pls could u send me the link too pls? i need metal trigger box too... thx

[808Kameleon]

@trotlo1 I will send the store-links to your inbox message. YouTube will NOT allow links posted on Comments (Reply).

[imprezax95]

hey guys, i have the utg l96, and my trigger assembly broke can someone pleaseeeeeeeee gime me one if u have an extra-----youtube pleaseeeeee i will do anything for one im in desperate need for one...im not rich....

[minion785]

3 words I LOVE YOU!

Dude your the best for doing this i have the stock trigger box that broke not long after buying the gun...its because i put the 2 little springs in wrong....

[808Kameleon]

@minion785 Was it the "tricky springs" on the top? Usually, the pin socket of which SUPPOSE to hold the ends of the "L" of the springs, will break OFF. As you can see in my aluminum trigger box, I do NOT have the pin socket to hold the "L" of the "tricky spring".

I read somewhere that UTG will come out with an up-grade trigger box... hopefully made out of metal and NOT and expensive as mines.....

[ak47legend]

Hey great video..this really comes in handy..Thank for Posting!!!!

[papagloc]

Those look like working hands. Thnx for posting.