"71 F100 True Dual Stack Exhaust"

[NickelbackPWNS]

I like how it backfires like my lawnmower.

[l3artledoo]

Nice! Stacks look and sound great on an old ford. White smoke all the way!

[jackwilliom]

just jizzed



[Z3CHYD]

@jackwilliom haha I'll take that as a compliment lmao

[71FordSportCustom]

Makes me flinch to see those holes ripped in the bed =/. I think I'm gonna walk out to my 1971, give it a big hug, and let it know that this will never happen to it lol

[Z3CHYD]

@71FordSportCustom there were already holes in the bed in the corners there, all I did was peel the metal up lol. If it was a nice bed I wouldn't of hacked holes in it trust me lol

[caniwitech]

Love it bro! I;m sure you get a million diesel guys making comment about it being a gas truck, but hey, stacks are about looks, nothing else. They make no more sense on a diesel that a gas engine. Enjoy your truck ,and let everyone else worry about themselves!

[Z3CHYD]

@caniwitech Thanks man! Yea there's a select few people who make fun of it being a "gas truck with stacks" but fun fact: The first truck to officially have stacks from the factory was gas "the little red rider" dodge truck. But most people love the truck round here haha

[HovalAirsoft666]

come on dude, first off dont uses sections of pipe, and 2.5 inch pipe and lower your idle and tune your engine!!!

[Z3CHYD]

@HovalAirsoft666 you use sections of pipe when your poor and build it yourself. it was a cold start hence the high idle, and it is tuned, it's almost a 40 yr old motor what do you expect lol

[grosteph58]

71 Ford truck , he don't runs so bad , is it the stock engine, how many miles on it ? certainly needs some cheap adjustments on the valves rockers to fix that backfiring problem .Don't worry it sounds good anyways .

[Z3CHYD]

@grosteph58 It's not the original motor, it used to have a 390 in it, my dad swapped that out for a 360 and used the 390 in a street rod project, and the backfiring "problem" is the carb, it's adjusted a bit rich and could use a rebuild. Nothing can kill this truck though, it's never not started lol

[powerstroker0864]

Idk if it replayed or not but try running ur exhaust above the driveshaft for the drivers side stack if there is room I had to run my exhaust on my f150 like that

[Z3CHYD]

@powerstroker0864 I tried but when the truck was flexed it would hit, that's why both stacks are now on the right side

[killakobra]

@Z3CHYD run it under the tailshaft

[Z3CHYD]

@killakobra I did, I would've hit either way

[powerstroker0864]

You said about the ground clearance is there room for you to go above the drive shaft to gain back the clearance that's what I did when I had my '91 f-150 I had it come out infront of ye rear tires and when I Yd the pipe I just ran it above my driveshaft but I had the room too wasn't sure if that would help you out or not

[powerstroker0864]

The little red express should be the only gas truck to have stacks you should run 3" true duals and exit it before the real wheels and get them mandrel bent they look much better that way

[Z3CHYD]

@powerstroker0864 trust me buddy, I would if I had the money. This was just more or less a "shit's n giggles" exhaust setup. Although it does get alot of attention haha. Thanks for being mature with the comments, alot of people on here are a little more childish

[Cummins12valve69]

Already had holes just had to make them bigger lol that would be a ford not a dodge

[datingadult101]

5 Stars short Movie

[Biker12266]

Love 100 Ford V8

[deathfromsniper]

is that milk line for the pipes?

[Z3CHYD]

@deathfromsniper milk line?! idk what that is lol the exhaust pipe is...well exhaust pipe from autozone

[deathfromsniper]

@Z3CHYD we use milk line it looks exactly like it i know alot of pipe looks that same but it looks exact. milk line is pipes that directs the flow of milk into a holding take its generally 2 1/2 inches to

[Z3CHYD]

@deathfromsniper well if i had milk line i woulda used it then haha I try to not spend as much as i can lol

[dkhill27]

That's pretty good. Like the sound of it. Im thinking about doing that to my 77 ford. But my toolbox is going to be in the way I think

[Z3CHYD]

@dkhill27 yea its homemade true duals off the manifolds into glasspacks, I've seen trucks with stacks and also toolboxes, but the move the toolbox back just enough for the stacks to come through

[motorcrossrider11]

that looks and sounds pretty cool



[Z3CHYD]

@motorcrossrider11 thanks its just a truck we get firewood/fool around with, so i figured i'd make it more fun haha

[skateordi93]

you get those things at walmart or somthing

[Z3CHYD]

@skateordi93 no Advanced Auto, it's not supposed to look professional if thats what your getting at lol

[skateordi93]

@Z3CHYD nope just because their tiny!

[Z3CHYD]

@skateordi93 there 2-1/2 which is plenty big for a stock 360 big block lol

[jasonman1515]

is it running open headers up the the stacks.

[Z3CHYD]

@jasonman1515 no its stock manifolds with true duals going into 2 glasspacks, then up the stacks

[Z3CHYD]

@djc342001 yea you should see it at night, its awesome!! lol but it's probably because it needs plugs/wires and the carb is the original

[Z3CHYD]

I might be moving the left stack side by side with the right because the way i have the pipe I lose about 3 inches of ground clearance, can't have that!