automotive spray painting clear coat

[SHOWMONEY5]

when i shoot my clear to make it look like glas i first shot it 6 inches away all around i shoot it quick so it can stick good for the second coat i get an inch closer but lil slower motion than so when i get to the 3rd coat i get 3 inches away and very gentle slower motion  it dont drip that easy or get orange peal but if im shooting say a door i do tha same but shoot fast wait about 2 minutes apply second coat waith 3 minutes then for the kill hehe

[eyewarnedyou]

I notice you don't keep the gun at a 90* angle (square) and the end of your spray lengths, is there a reason? Doesn't this allow for some orange peel in those areas? Just curious.

[Zlyzer]

If anybody has actually sprayed clear before, it's really hard to get right. If you spray too far away you'll get orange peel, and too close you'll get runs. I've just finished spraying my car bonnet for the second time, and although it's a LOT better than the first time I did it, it's not PERFECT. Trust me, it's hard to get clear right.

[pcorf]

I like the satin black finish better!!

[darrenn438]

I would have done one panel at a time and worked top to bottom but i suppose we all have our own style.

[maurorex]

this is nice but whats the name of the spray tool you are ussing?

[adam0carter]

Hi mate. Is the the gti pro? I have that gun and I'm really struggeling to set it up right.. What psi have you got it at? I have the needle screw set so you can see two rings on the thread and the fan wide open.. And advice? Would be much appreciated! Adam

[RalphdaCuban]

I'm A&P (Jet Mech) and I know plenty pro painters, I tell you this guy knows his sh*t has a great fuk'n rhythm. I can weld anything, in any position with great rhythm but I fall apart when I get a paint gun in my hand I don't know why. This sh*t is a art every body has there own style what ever works, sammy nice fuk'n job mate!

[TymonRuchalski]

and where the second layer?

[burgz666]

i will now comment in australia you are ment to wear an airwash hood because the isocyanates still can go through your ears and skin...!. and i would definatley not walk the whole side of the car because more than likly you will spray unevenly...oh and i spray from bottom to top most of the time its just my preference if you are good enough painter you can do this with no dramas

showie mate good on ya... giv some of those backyarders a tip lol...

[osip55]

wow lots of cunts in here who are hero expert spray painters.he does sick jobs so fuckin spin your shit somewhere else

[ElNino1092]

cool respirator

[sammycsharp]

thanks for the positive feed back mate. Its a Devilbiss GTI.

[SHY910]

why does everyone have to bag out and point out the bad points in every video?? fucking hell im sure when you post vids up you get negative comments too....

nice painting mate, different style to me is that a devilbiss gun? oi panhead walf the entire side? pffft what you mean when your doing a candy job yeah but not clear coat? every painter ive worked with does a panel at a time...... but i do agree with starting from the top but i guess thats personal prefference

[sammycsharp]

haha, bet your a sick cunt too!

[panhead1219]

VERY poor gun handling. Keep the gun straight, you limp wristed poofter! And being as you have the luxury of a down draft booth, EDUCATED people will know that you start from the TOP and go down!

Also, you WALK the entire sides, not a panel at a time! (sheesh!)

But at least you appear to be wearing a forced air system, instead of a cartridge respirator like all the other dorks.

[pellebjurman]

How many bars do you have when clearcoating?.

[Abbertont]

maybe you should move a bit quicker next time

[sammycsharp]

Thanks mate, only the first coat. 2 coats applied. 2:1 5-15 hardener 20% reducer.

[pellebjurman]

Was it one clearcoting??.Everybody has not the same tehnique,but holy!!!! this was nice painting by the guy.he seems happy!

[sammycsharp]

Whats wrong with the Gun?

[antonyr123]

how do u mix clear coat ?

is it 50/50 with thinner and 20% harder ?

Cheers.

[silvereskimo]

that gun was nasty. try a sata rp

[zkxlz]

Hope that wasn't the finish coat,looked like shit...

[shajohan]

nice vid..

did u use HVLP spray gun?

do u have pic or video after spray this car?

how the finishing looks? i mean orange fell problem or did it glossy?

[mazztermike]

hey you miss a spot right there by the handle....

[sammycsharp]

haha.... noiseydj sik fuk

[noiseydj]

what hapened to doing the edges first and doing a grip coat??????? amateur

[ContigoSinTi]

ey dude...... excelent....

im informatic, but i painted my car... but i dont used clear coat.... im going to paint and use clear, but i wanna ask u

how many times, i have to pass clear...

2 caps, 3 caps..4..

thnks!!

[bladey1010]

Go Man Go! Do a tutorial on spot panels and fading blends!!!

[sammycsharp]

Hi steve