was wondering about your work with DC. Tried to mail you from your website, but there is no contact info there. Are you still doing it? Do you find DC preferential to AC? What pulse rate are you using with DC and for your car test, what was the Hz? I know you had 40V, but I think that was all you mentioned.
My email has been and is still "johnaarons at hydrogen tap dot com" . They won't let you put in a web address here so you have to spell it out ..I will await your mail.. John AArons
I have received many questions about comparing other units with mine. I don't believe anyone can boast that they are getting more Hydrogen without showing the test first. You get more Hydrogen by putting more power through the unit. You can get that by raising the volts or putting the plates closer or making them larger or using electroliytes. John AArons
John, i would like to order the first one. If it works as it will, I will need many more for The Wilds, which is North America's largest conservation of endangered species, which provides tours through open pastures on gasoline buses. Obviously, we are looking and invest in "green-friendly" technologies.
Thanks. I will start shipping the 19th. I hope you understand that we are getting into uncharted water here and what I have is still experimental. I have received a lot of unexpected mail asking when I intend to sell the Series 3L. I am nervous about this because I don't want to take any money from anyone that doesn't understand what we are doing. John Aarons
In case I haven't mentioned already, John I think your efforts are fantastic. Equally inmportant is the fact that you publish them in an open fashion. It closely resembles software Open Source. It is power to the people, only literally. Thank you.
John, Are these units going to produce more hydrogen then the magdrive generators? According to Jim at magdrive his unit doesn't produce enough to run the engine (V8) on the generator. However he is using the stainless tubes not the plates. I would really like to hear your opinion on this. I have enjoyed watching all of your videos and have learn alot.
I am not trying to be in competition with anyone. My goal is to get the system working. Publishing is to pull back the curtain. The tubes do not produce more. You have to use area and amps. I am trying to standardize the system there is no magic.
your a good man, Am I correct in assuming your device is an HHO generator? After looking at some of your videos I did notice quite a bit of corrosion on the connection leads that connect to the plates are you going to isolate those leads in future prototypes? have you determined how long the SS plates will last? will you be publishing optimum Hydrogen output for a given current/cell setup?
The leads (in the new series "L") are now gold plated. The answer is "yes" and I will show the output in a video when the "L" is completed. Next day or two.John AArons
sorry about all the questions I did a little experimentation with hydrogen production myself in the late 80's but had to put it on hold as my duties in the Navy were keeping me to busy. at any rate I will be watching your progress and good luck.
All input is welcome. Please check the last video it shows a lot of revisions to the unit I will sell.The unit is the Series 3L and it will be completed in the few days. (manyh extras.
Gernerator should be easiest as there's no accelleration. Only an idle state which almost eliminates the need for A/F regulation. Generator should be first because it is easiest.
Hi John,
was wondering about your work with DC. Tried to mail you from your website, but there is no contact info there. Are you still doing it? Do you find DC preferential to AC? What pulse rate are you using with DC and for your car test, what was the Hz? I know you had 40V, but I think that was all you mentioned.
Thanks!
J
seoulpatch 4 years ago
My email has been and is still "johnaarons at hydrogen tap dot com" . They won't let you put in a web address here so you have to spell it out ..I will await your mail.. John AArons
johnaarons 4 years ago
As a DJ, I love the use of headphone jacks as your water fill sensor. Best of luck to you.
TheSoulMekanik 5 years ago
So far so good; I am always testing for problems and to date no problems. Interesting a DJ would be watching; thanks for your interest. John AArons
johnaarons 5 years ago
I have received many questions about comparing other units with mine. I don't believe anyone can boast that they are getting more Hydrogen without showing the test first. You get more Hydrogen by putting more power through the unit. You can get that by raising the volts or putting the plates closer or making them larger or using electroliytes. John AArons
johnaarons 5 years ago
Thanks
johnaarons 5 years ago
John, i would like to order the first one. If it works as it will, I will need many more for The Wilds, which is North America's largest conservation of endangered species, which provides tours through open pastures on gasoline buses. Obviously, we are looking and invest in "green-friendly" technologies.
All the best.
mcburney7 5 years ago
Thanks. I will start shipping the 19th. I hope you understand that we are getting into uncharted water here and what I have is still experimental. I have received a lot of unexpected mail asking when I intend to sell the Series 3L. I am nervous about this because I don't want to take any money from anyone that doesn't understand what we are doing. John Aarons
johnaarons 5 years ago
In case I haven't mentioned already, John I think your efforts are fantastic. Equally inmportant is the fact that you publish them in an open fashion. It closely resembles software Open Source. It is power to the people, only literally. Thank you.
nategreg 5 years ago
Thanks and the open idea (the ability to add on to the unit) is just what I had in mind. The Series 3L is made to accept other items. John AArons.
johnaarons 5 years ago
John, Are these units going to produce more hydrogen then the magdrive generators? According to Jim at magdrive his unit doesn't produce enough to run the engine (V8) on the generator. However he is using the stainless tubes not the plates. I would really like to hear your opinion on this. I have enjoyed watching all of your videos and have learn alot.
Thanks Mark
MARKFALLEN 5 years ago
I am not trying to be in competition with anyone. My goal is to get the system working. Publishing is to pull back the curtain. The tubes do not produce more. You have to use area and amps. I am trying to standardize the system there is no magic.
johnaarons 5 years ago
your a good man, Am I correct in assuming your device is an HHO generator? After looking at some of your videos I did notice quite a bit of corrosion on the connection leads that connect to the plates are you going to isolate those leads in future prototypes? have you determined how long the SS plates will last? will you be publishing optimum Hydrogen output for a given current/cell setup?
dwinslow1245 5 years ago
The leads (in the new series "L") are now gold plated. The answer is "yes" and I will show the output in a video when the "L" is completed. Next day or two.John AArons
johnaarons 5 years ago
sorry about all the questions I did a little experimentation with hydrogen production myself in the late 80's but had to put it on hold as my duties in the Navy were keeping me to busy. at any rate I will be watching your progress and good luck.
dwinslow1245 5 years ago
All input is welcome. Please check the last video it shows a lot of revisions to the unit I will sell.The unit is the Series 3L and it will be completed in the few days. (manyh extras.
johnaarons 5 years ago
Question is are you able to produce a large enough volume of hydrogen to run your vehicle? how about a small gasoline generator?
dwinslow1245 5 years ago
I am first working on the mileage first than I will be working on a system to run directly. There are many things you have to do between the two.
johnaarons 5 years ago
Gernerator should be easiest as there's no accelleration. Only an idle state which almost eliminates the need for A/F regulation. Generator should be first because it is easiest.
nategreg 5 years ago