How to Make a Homemade Airsoft Grenade Launcher Part 2: Step by Step

[M46t3rF1r3w0rk6]

NICE JORDANS :D

[Maddog19716]

What size shell to use or wich one should I buy

[aderonn]

@Maddog19716 Nearly all grenade shells are 40mm, so they will all fit this design. As for brand, I recommend the S-thunder or madbull ones.

[merlionjr]

Great how to video here... very thorough. One item though, if you move your foregrip forward an inch or so, you can bypass having that piece of string you have. Not that it matters, but you can save some time. Thanks for posting.

[brandon123e4]

Can u make a shooting demo

[aderonn]

@brandon123e4 I did. Its the second link in the description. Its an older video, but it shows the grenade launcher working.

[marshy1122334455]

Where exactly did you buy the grenade?

[THATpbGUY14]

Nice shoes

[TheGunsfool]

could u use 1 2/4 pvc 

[TheGunsfool]

so the grenadewill fit

[lucasmiroslaw]

This doesnt work anymore, I think it is patched.

[DrRandomHobo]

can u use a homemade grenade

[aderonn]

@DrRandomHobo If you can make an airsoft grenade that works the same as a manufactured airsoft 40mm grenade, then yeah.

[ScheissRTL1]

Really Works !!!!!

[Warhamer116]

Surprised to hear that you're only 15 years old an yet you talk quite clearly and sensibly.

I guess i've been too long with those snotty mouthbreathing kids you get when playing fps games.

Anyway good design, and most of all does not endanger fellow players (like some gunpowder contraptions i have seen, gos those were dangerous to both user and the target).

Liked, favorited, commented.

[aderonn]

@Warhamer116 Thanks! I'm glad you liked it and its nice to get some support instead of all the usual hate. happy holidays

[RyanAirsoftReviews]

Thank you!!

[RyanAirsoftReviews]

Aderonn please check out our channel! Love your channel and we could use some recommendations and ideas!

[aderonn]

@RyanAirsoftReviews Hey I checked out your channel and it has potential, just keep posting videos and you'll see more and more subscribers start to roll in.

[SniperShotz99]

Can u tell me if a paper towel roll will be good for casing the grenade?

[aderonn]

@SniperShotz99 A thick walled cardboard tube might, but probably not. It will be best if you use pvc.

[innyopinjo]

can you reuse the grenade?

[aderonn]

@innyopinjo Yup. Just push the button in all the way to reset the grenade, fill it with bb's, and fill it with gas.

[tapout332211]

i like the jordans under the table

[plixplop]

Looks better than I expected!

[slumberbadak]

can i change the grenade with co2 cartridges?

[aderonn]

@slumberbadak Not with this design. The whole point of this is to fire off the grenade.

[slumberbadak]

@aderonn alrightt. i get it :)

[llrap21]

can i haz o-O

[fifaforlif3]

Nice air Jordans

[ChickenwithaMohawk]

it costs 60 quid for one grenade so its really not worth it no matter how freekin cool this looks

[fenix24031980]

in spanish , please

[halohomasi123]

If done right does it shoot good

[aderonn]

@halohomasi123 Yes but it mostly depends on the grenade you use. I recommend s-thunder or madbull grenades.

[Little99N]

could you use ducktape

[aderonn]

@Little99N Instead of electrical? Yes. And don't use hot glue (my mistake). Use some sort of strong epoxy

[jsp766581]

Nice shoes seen e'm in the back ground

[airsoftawesomeness]

what should i use to cut the caulk gun? a hack sack?

[aderonn]

@airsoftawesomeness Yeah, a hack saw will work.

[DAbeast2123]

f*** that ill just go and get an airsoft m203

Na im just playin thats pretty cool tho

[larrygarry10125]

but how do u make the bullet

[aderonn]

@larrygarry10125 You can't make them. They are made of CnC'ed aluminum and are designed to hold large amounts of pressure. Thats not something you can build yourself by hand.

[josh3629]

nice jordons man

[flarepie24]

I meant make it lol

[flarepie24]

It looks amazing and I would totally male it, I just don't wanna buy the grenade XD

[TeChN0JUNKY]

you are a genius!

[numberboyowns]

you should make more airsoft guns and make tutorials for them :D

[2841peanutbutter]

nice jays haha

[IDoIt777]

r the grenades reusable

[1000superhappyfun]

Wait how dose it shoot

[aderonn]

@1000superhappyfun You need a 40mm airsoft gas powered grenade launcher. The rod pushes the button on the grenade and fires it off, expelling the gas and pushing the bb's.

[1000superhappyfun]

Wia5

[CallOfDutyBoss64]

Your an awesome genius and I subscribed. Also I think you should get a 120 round grenade.

[PoEmSuNeEk619]

This wicked and legit haha

[j0rg3131]

I like the intro.

[brandonlitt1]

how much did it caust u and do u cut the caluking gun in half and at the end????????

[aderonn]

@brandonlitt1 It cost about $20 to $25 for the launcher, not including the grenade (link is in the description to buy one). And yes, I cut the front half off the caulking gun.

[SuperHunterWithBow]

@brandonlitt1 its not that hard to the meddle

[MrJacob2567]

like it will make one but how much psi is ther on it

[tatertot1435]

beastly shoes!!

[DALTONDC54]

How much did u buy the grenades for

[aderonn]

@DALTONDC54 They cost between $35 and $60. links are in the description.

[SuperROBBY28]

thanks



[123asd1]

k so 1 and a half inch round pvc?

[aderonn]

@123asd1 1 1/2 inches in diameter.

[SuperROBBY28]

do you have to buy the shells

[aderonn]

@SuperROBBY28 yes. link in the description

[757anorfan]

@aderonn thanks.

[757anorfan]

@aderonn Crap, i just flagged this

Video on accident): oh well. But anyway i see what your saying. Tigher group is more range and for a grenade launcher that extra few feet or how ever long it may be will be very usefull. But i have one question. I watched some of your videos. And i understand, you have a few 40mm grenade shells. The s-thunder and the other kind. Which do you personally prefer? Because i think im goin to get a grenade. Do you prefer the s-thunder design with one big hole in t

[aderonn]

@757anorfan I definitely prefer the s-thunder grenades. They work much better than the other brands I have tried and are easier to load with the large hold in the top instead of the little single bb slots.

[757anorfan]

Love the idea. gunna make one. And i love your reviews and videos. And by the way, does the long barrel reeeally effect the acuracy? I mean, theres only so much a few inches of PVC can do for guiding a whole bunch of bbs. I can understand a rubber or foam slug. But bbs doesnt sound realistic. (no offense. I will agree that long barrel=accuracy)

[aderonn]

@757anorfan Well the longer barrel just means the bb's will keep a tighter grouping and leave the barrel at a tighter angle relative to the tip of the grenade. I would think at longer distances (75+ ft) that could mean quite a bit of difference.

[CHALLIONER100]

man nice shoes Js all the way

[mrclembeast]

Nice dildo

[geweher1]

where do i get ammo for this? do i talk to some taliban? or can i talk to my uncle Achmed? and is the ammo able to be converted to contain paintballs?

[aderonn]

@geweher1 I don't appreciate the ill humor but there is a link in the description. The s-thunder grenades with the open top can hold 4 or 5 paintballs each.

[TheChachi1993]

no I mean de idea's and the plan's to make it or or did you made it up by yourself?

[aderonn]

@TheChachi1993 Oh. I made this up myself.

[mrmanpower22]

@aderonn i don understand how to put in the hinge at 5:36 can you made it clearly so that i can understand?

[aderonn]

@mrmanpower22 I pretty much just glued it on. Nothing too special.

[TheChachi1993]

what are your sources

[aderonn]

@TheChachi1993 what do you mean my sources? like where i got the materials? homedepot

[Devoo55]

"7" for longer distances."

[nerfagent100]

does it use gas to fire

[aderonn]

@nerfagent100 Yes. The compressed gas is used to propel the bb's.

[ibanezcole]

what about the grenade itself. where does it come from

[WorldsMostAwesome7]

your a airsoft god

[aderonn]

@WorldsMostAwesome7 lol thanks.

[WorldsMostAwesome7]

@aderonn im serious dud

[kevincampos911]

Nice shoes

[MrPLR11]

love the jordans

[wyattwadlow]

Ha he's warin jordans

[DrewRod13]

cant you just cut the plate off of the caulking tube rod and use the existing rod that is already there as the firing pin?

[aderonn]

@DrewRod13 yes you can. You just need to make sure you put some glue or something on the end of the trod where the plate was so it doesnt slide through the back of the launcher.

[ninga638]

tell me what you can use for a firing pin. something cheap and durable for multiple grenade launchers. and if you use a golf tee, wont it ruine your grenade?

[aderonn]

@ninga638 The golf tee wont be as bad as a metal bolt would be. You can use a metal bolt tho as long as you wrap it with a layer of electrical tape to keep the metal bolt from touching and scratching the metal shell.

[ninga638]

tell me what you can use for a firing pin. something cheap and durable for multiple grenade launchers.

[coolkids998]

Can u make a video making one that would be really helpful

[flamingtacos42]

would something like a nail or screw work as a firing pin?

[aderonn]

@flamingtacos42 it could but the metal screw could mess up the CNC metal grenade. If you do use a metal nail or screw, i recommend covering it in a thick layer of tape or padding.

[TheAirsoftkillerz]

how wide is the pvc pipe in the materials list you said 1.5 in. and in this video you said 4 in.

[flamingtacos42]

@TheAirsoftkillerz the pipe is 1.5 inches wide. its four inches long. 

[huntingiscool]

HELP should the circular metal piece of the cualking gun fit through the pipe?!!!

[aderonn]

@huntingiscool yes it should. but you can cut it off if you want. then you wont need to put a bolt on the front of the metal disk. Just make sure you put a little glue on the rod so it doesnt slide out the back.

[baller3493]

where do u get the grenades ?

[aderonn]

@baller3493 evike. there is a link in the description.

[FalconForce62]

plus im gonna just flip the hinge instead of usuing the string at the end.

[aderonn]

@FalconForce62 it doesnt work that well because the pivot point will get in the way of the barrel. If you use the same hinge that i did, you will have to cut into the barrel to get it to fit, which will get in the way of the grenade inside.

[FalconForce62]

@aderonn ahh, well thanks, i was just about to go buy a cheap hinge!

[FalconForce62]

Hey aderron, im ordering the same shells as you have, and i will also build your grenade laucher, in about a month and a half, il have an actual step by step build of it, and since its your creation, i wanted to see you ideas on it, and if you came up with any new ideas for it. i will also post a video of it in a skirmish too!!! subscribe evry1!!!!!

[aderonn]

@FalconForce62 sweet. good luck with building it. remember to post your vids as video responses to my vid so i can see it.

[FalconForce62]

@aderonn il do that but il also be posting a few other videos, similar to yours, il try to get one of the building, since il be building 2, along with my cousin. I will also be using a powerful magnet instead of the eyelet. im also going to find out if godfather airsoft will even let me use it in their cqb arena!!

[FalconForce62]

@aderonn il do that but il also be posting a few other videos, similar to yours, il try to get one of the building, since il be building 2, along with my cousin. I will also be using a powerful magnet instead of the eyelet. im also going to find out if godfather airsoft will even let me use it in their cqb arena!! plus, can i just use regular sandpaper to sand it out? i have access to a sanding tool, but its pretty far away,

[aderonn]

@FalconForce62 you can use regular sand paper but it will take a long time and your hands will hurt.

[kaveka33]

wee did you get your fore grips?

[aderonn]

@kaveka33 its the back of a car squeegee.

[edman13371]

thank you matt

[bunywoo]

the intro is cool:D

[nodnarb454454454]

Are all airsoft grenades the same size because i don't want to buy the wrong one and be out of 30 dollars and are they all gas?

[aderonn]

@nodnarb454454454 all 40mm grenades are the same diameter (40mm). they are different lengths tho. and yes, they are all gas, tho some are green gas/propane and some are CO2

[brentonwatters]

you should shoot it

[aderonn]

@brentonwatters you should look for my shooting test video in the related videos ---->

[larryqa]

noob toob

[combatarmsman101]

i totaly am gunna make one

[braseldazzle]

how much is it to make

[aderonn]

@braseldazzle it costs about $20 to $25. You can buy an airsoft grenade for $35 to $60 on evike.com if you dont already have one.

[THED1J]

my god every 1 in america has pvc pipe

[aderonn]

@THED1J because you can buy it at any home improvement store for quite cheap.

[THED1J]

@aderonn kl

[BlurConfusion]

awesome



[BlazingChimera]

this thing reminds me of the thumper

[madmicah2]

imagine this imagine that!! just show us how to do it right!!

[MrKills12]

u should make one that shoots four at once with one trigger

[ubernate860]

1:45 cheat sheet

[aderonn]

@ubernate860 heck yeah! i dont trust myself to remember all this stuff off the top of my head during the video. i always try and make a list to remind myself of what to say.

[575david]

@aderonn hey aderonn one thng do you have a mp7 because i was wondering if you could make a review for the mp7

[aderonn]

@575david sorry but i dont have an mp7. what kind of mp7 are you interested in? electric or gbb?

[mrSwedishdude666]

@ubernate860 dude do it better at your self..

[ubernate860]

@mrSwedishdude666 if ur gonna be a troll go jump off a bridge...i wasn't criticizing anyone

[deadcanetoad]

@GhilleGhille your a little bit slow.

[GhilleGhille]

lol look at 1:18 bottom of screen you can see his jordans

[sniperman58]

How much fps does it go?

[aderonn]

@sniperman58 it depends on the grenade shell you use.

[TheGuyWithADog]

want me to send a video of my grenade launcher?

[TheGuyWithADog]

@SpetsnazP226 i used a hacksaw

[TheGuyWithADog]

it would be easier to take out the nut on the disc shaped thingy on the caulk gun and pull the disc out instead of gluing on a bolt.

(Finished mine)

[aderonn]

@TheGuyWithADog the nut was glued on. but for mine i just used my dremel tool to cut it off.

[shanny2323]

can u make the barrel really thin and use like 28mm pellets

[blackasad]

COOOOOOOOOOOOOOOOOOL

[just4dafish]

how much total cost would u say?

[aderonn]

@just4dafish about $20 to $25. and then $40 to $60 for a 40mm grenade shell if you dont already have one.

[vrakamana]

whear i can find grenades?

[aderonn]

@vrakamana i put a link in the video description.

[vrakamana]

@aderonn can this website on the link snd worldwide?

[aderonn]

@vrakamana im pretty sure they do. check their policies page.

[vrakamana]

@aderonn ok man thank you .(there are expensive)

[bocaj574]

so can i use home made grenades in it or do i have to buy some??

[aderonn]

@bocaj574 you have to buy them. the grenades deal with very high pressures and arent something you want to make yourself unless you have a CNC machine to make it out of aluminum.

[Ghastlyfartest]

your link doesn't work, i have the same jordans btw

[firethecracker]

NICE JORDANS

[TeamBlackEagle1]

All that glue might have me to worried about it during a game. but ill still make one just to save 300+ dollars lol

~Fox

[ozzotheozman]

u are geuinos

[fieryfoxproductios]

i want to make one and paint it brown and black like a m79

[versatilechicken]

does evike ship internationally?

[aderonn]

@versatilechicken no, sorry

[Deathboy2k]

@aderonn

Well that's bullshit. Half my club have ordered from evike to Norway.

[aderonn]

@Deathboy2k alright then. sorry for going by just what they say on their website. dont have to be so rude about it.

[didijustd0that]

how long is that plastic pin

[aderonn]

@didijustd0that doesnt really matter that much, but i think its around 3 inches or so.

[mstrsmall]

nice air jordans

[sagargondaliya4]

For those of us that have a Dremel, just cut off the circular plate on the "piston" part of the caulking gun. Then glue a bead or a small peice of plastic to the tip. There is a much less chance of the pin breaking.

[aderonn]

@sagargondaliya4 true. thats what i've been doing on my newer models.

[zs7iey]

hey i saw the first in this 40mm grenade tutorial series and it's amazing!

[1zacster]

It it a real grenade like blows up On impact?

[aderonn]

@1zacster no. its more like a large shotgun. it shoots a shower of 18 to 200bbs (depending on which 40mm airsoft grenade you use)