Free electricity from the ground by Tariel Kapanadze

[kunadude]

Note: The special 3 coil transformer winding is a novel construction that takes advantage of NOT fighting your own Back emf from the coils. Naturally, since common practice normally incorporates this loss, without it fighting you it would seem as a power multiplier. This is what you would normally have if you didn't have to deal with those losses. The circuit will work even without this is my point.

The power gains in far excess of this is another matter based upon static charge induction.

[kunadude]

From Fig3 experiment, it was found that the arc is jumping from the metal screwdriver held near the open ended hv wire. It was found that the arc is more

pronounced with a POS Voltage than too the NEG Voltage wire, which is only noticeable with a unipolar charge on the end wires. Not noticeable with ac due to the polaritys switching. However, during the ARC, no surge or pull is noticed on the input driving side. The electrons in the screwdriver are being attracted to the Pos charged wire.

[kunadude]

Now, no magic in the transformer that he uses, thats for simplifying and doing away with multiple circuits. Essentially, his generators tank circuit with the output replaces the screwdriver. The input provides the open HV to the other electrode. Both it and the other side of the tank connects to gnd, separated by an odd multiple of the driving freq. Now, charges within the copper wiring itself along with those in the gnd are attracted to that HV electrode causing an ARC. Relax's then repeats.

[kunadude]

:) Mankind has a tendency to over complicate things. This circuit's working principle has been demonstrated in basic experiments from "Alexander Chernetskii" & Avramenko' s Plug. Also, Yuri Galkin. Alexander Frolov's publication on "Potential - Power Transformation" will illustrate what is happening. See Fig#3 of his basic circuit demonstration and findings.

Tariel's Generator is simply a resonant Tank ckt that replaces the "Screwdriver"

in Fig3. Input is simply HV open coil to gap and gnd.

[MattBlytheTheOne]

this looks very much like the principles in my Tesla video :)

[TheIronStark]

what is the soundtrack it's great!!!

[oscarnine2]

Nice drawing, but like all so-called free energy designs I've seen, no one has actually built it and made it work! I can't even make it out, its too small. Can this schematic in a larger form, be found somewhere else?

[oztronix]

@oscarnine2

Go To: Overunity Com

and type: Kapanadze (he is the inventor).

There are his videos there, as well...

He's in Geogia, at the moment...

[MrTopbuzzer]

@oscarnine2 it runs ! search on google : jnaudin kapagen

[germeten]

This circuit is so simple is funny. The arc portion is unnecessary, all it does is establish 50Hz where you can get (60Hz) direct from household line current. The

TV HV transformer(s) could be a MOT that drives the parallel resonant tank. The whole "secret" is the parallel resonant tank that powers the load. It's HAM radio on steroids.

[germeten]

This circuit is so simple is funny. The arc portion is unnecessary, all it does is establish 50Hz where you can get (60Hz) direct from household line current. The

TV HV transformer(s) could be a MOT that drives the parallel resonant tank. The whole "secret" is the parallel resonant tank that powers the load. It's HAM radio on steroids.

[teslaandlyne]

What is the ~ in a circle, that is an AC generator.

[skinostra]

@teslaandlyne Yes that is the "TICKLER " frequency generator.I am guessing that this part of the circuit acts like a "SYPHON"to get the rest of the circuit to go into resonance.

[insightllc]

@teslaandlyne I JUST GAVE YOU THE SECRET OF THE 33rd Degree THAT WHICH YOUR GRANDCHILDREN'S CHILDREN WOULD NEVER SEE....

SCIENCE NO BETTER THAN RELIGION FOR 111 YEARS ENERGY WAS FREE.

[bravenobel]

of course this schematic is not correct. yhe work this thing for many year . he will not show the secret.

[Pirate88179]

Kapanadze is the man!!

Bill

[lvildos]

the spark discharge magnetic coupler reflects a very low impedance to the tank circuit when it need a very high impedance. I don't think this schematic is correct