That's some eye candy you got there! Any chance you would be able to integrate an IR led for remote controlling and arduino or IR enabled chip in say like a PC like mine the USS EURISKO ? Please have a look at my channel and tell me if you'd like to cooperate!
@MobiusOne86 the playmate one I did using an upgrade kit designed and built by a fellow prop builder. The modifications were done by me and I installed the blinkies I got from him. Took about 2mweeks working a couple hours a day.
@MobiusOne86 the playmate one I did using an upgrade kit designed and built by a fellow prop builder. The modifications were done by me and I installed the blinkies I got from him. Took about 2mweeks working a couple hours a day.
Did you have problems using gmprops instructions? Did you find measurements were out, and the most critical parts of the panel installing and glueing etc weren't explained in enough detail? I'm making the same kit as you've made, and I'm following his measurements precisely, and several parts are falling short, not long enough, not wide enough etc.
@trekpropguy my measurements were a little off and the box wasn't square when I was done, but I was not taking as much care as I should have to really Donita up right. Mine ended ip thinner than it was supposed to be because I assembled it wrong. This project is not something you can rush through. You have to take your time or else you will end up with a substandard piece. Take it slow and easy and good luck.
HI, are you going to sell any of them. I always wanted one. Please let me know. Thanks. I like the third one you opened. And if you do want to sell one, please let me know how much. Thank you. I give this vid 5 star.
I wish I could aford one rhem. Very nice. Are you planning on selling one. Always wanted one but cost so much. Great collection.
blade75964 3 months ago
That's some eye candy you got there! Any chance you would be able to integrate an IR led for remote controlling and arduino or IR enabled chip in say like a PC like mine the USS EURISKO ? Please have a look at my channel and tell me if you'd like to cooperate!
ASPHIAX 4 months ago
@MobiusOne86 the playmate one I did using an upgrade kit designed and built by a fellow prop builder. The modifications were done by me and I installed the blinkies I got from him. Took about 2mweeks working a couple hours a day.
cjvince 5 months ago
@MobiusOne86 the playmate one I did using an upgrade kit designed and built by a fellow prop builder. The modifications were done by me and I installed the blinkies I got from him. Took about 2mweeks working a couple hours a day.
cjvince 5 months ago
That Playmate-Tric Prop is great. Built it yourself? Or can you buy the parts? And how did you do the original opening sound?
Thanks!
MobiusOne86 9 months ago
Nice job! They're great!
Beanick 1 year ago
where can i buy tricorders like that?
swissm8 1 year ago
You should rly make a med tricorder. And how did you make them or get them?
logolimi 1 year ago
you are going too run out of battries)
bigadrian100 1 year ago
Did you have problems using gmprops instructions? Did you find measurements were out, and the most critical parts of the panel installing and glueing etc weren't explained in enough detail? I'm making the same kit as you've made, and I'm following his measurements precisely, and several parts are falling short, not long enough, not wide enough etc.
trekpropguy 1 year ago
@trekpropguy my measurements were a little off and the box wasn't square when I was done, but I was not taking as much care as I should have to really Donita up right. Mine ended ip thinner than it was supposed to be because I assembled it wrong. This project is not something you can rush through. You have to take your time or else you will end up with a substandard piece. Take it slow and easy and good luck.
cjvince 1 year ago
Hey will you trade me for a built voyager tricorder?
tricorder545 2 years ago
sorry, not interested in trading. Thanks
cjvince 2 years ago
@cjvince i know the inside of these replicas have cool chips in it see it shin makes it look futuristic
mquiroz90 1 year ago
are the parts still avaialble to enhance tricorders ? I have a playmates tricorder which i am considering upgrading.....many thanks phil
philtw 2 years ago
Oh those are awesome. They actually look like they are from the show. Ah man, I want those. lol. Great job on them.
shanejensen 2 years ago
Nice job on all of them!!
Trekcollector 2 years ago
HI, are you going to sell any of them. I always wanted one. Please let me know. Thanks. I like the third one you opened. And if you do want to sell one, please let me know how much. Thank you. I give this vid 5 star.
blade75964 2 years ago