sounds pretty good! bro ive been trying to do this to my 04 cbr1000rr if their is any suggestions on modifications I would GREATLY appreciate it or if you know anyone that does this type of work you can refer me to.
@Hamiltonrepsol Yea I'm with zoro1krr! How much do you want for a copy of the design so I can make it? since your not willing to take this $500 off my hands....
@Hamiltonrepsol I see you are not making these anymore. Any chance you could share the design details so I could have one done by another fab guy? Specificly looking to know if you are using a muffler somewhere in there or if this is straight pipe
I need to fine a exhaust like this one its sick. Is that undertail a regular Hotbodies undertail and you just covered up the hole and repainted its or it that the way it came from hotbodies? thanks
Hi dude..Im in love with the bike in the video..Im getting the same bike in a couple of months & decided mine HAS to look like that! ><" just wanted to ask a few things..
1) you make the exhaust for $550- is that correct?
2) where did you get the undertail from? or is the entire tail one piece?
3) did you get the swingarm & & aluminium bits powdercoated?
thanks.. my email is alvynsofjan@hotmail.com ..I live in australia, so if possible I'd like to pay for your services & shipping to me.
do you make these for other people or is this just for your bike? and if you build to sell how much do u charge and what do u need if i wanted 1 the bike or header? i live in GA so i dont think i could bring u my bike. and awsome bike bro!!!!
Thanks, I have not built any for a year or so. dont have the bike any more so dont have a anything to mock it up to to build....would have to have a bike to do it...sorry
Nice bike with a sweet sound. I'm trying to find the loudest pipe, but still want a quality sound. Any one have any idea? I have an older bike, it's a 93 CBR 900.
i have a 2005 cbr 1000rr i just put a m4 slip on exhaust on and the sevr o meter or whatever that is hooked to the exhaust that i took off made a red light flash fi on my bike now,,,what do i do,,there is no place to hook it back up now..help me
you said you had to leave your servo on so it must not have been fixed to the stock pipe then...or how did you leave it on.....and do you no if that red light being on effects how my bike runs
my ears hurt just listening to this vid. sounds great tho. undertail looks great too. i have the other one. looks great too but urs def looks nicer. good luck..
Looks like you used the 'o8 Brake fluid reservoir?? Did you have to fab a new bracket? Tickets for side mounted plates are $110 around here.. I like your location!!
sounds pretty good! bro ive been trying to do this to my 04 cbr1000rr if their is any suggestions on modifications I would GREATLY appreciate it or if you know anyone that does this type of work you can refer me to.
1macktx 1 month ago
@BakerFF225 i have seen the exact same bike runing thru jacksonville florida where i live everyday
supan00b1 6 months ago
IIIIIIssoooooooo é Moto
diego85188 6 months ago
linda
1912Ander 6 months ago
LOL where the exhaust pipe ?
Dandy1488 7 months ago
Why is the rear tire moving on neutral when you are reving?
wiktorkramer 7 months ago
@wiktorkramer
cuz the vibrating. you dont have a bike at yourself ?
ni3lsj3 6 months ago
@ni3lsj3 i have, mine is not moving at neutral like this
wiktorkramer 6 months ago
@wiktorkramer
full throttle, i have an r6 2009 and it does the same thing on my paddack though.
ni3lsj3 6 months ago
@ni3lsj3 maybe because it has a lot of power and vibrations. Mine is a CBR 125R and it has got only 15 HP. haha
wiktorkramer 6 months ago
@wiktorkramer
haha that makes the difference.
ni3lsj3 6 months ago
@wiktorkramer friction in the transmission, it only turns cause its of the ground
MrCraves 6 months ago
@Hamiltonrepsol Yea I'm with zoro1krr! How much do you want for a copy of the design so I can make it? since your not willing to take this $500 off my hands....
jbkimble28 8 months ago
@Hamiltonrepsol I see you are not making these anymore. Any chance you could share the design details so I could have one done by another fab guy? Specificly looking to know if you are using a muffler somewhere in there or if this is straight pipe
zoro1krr 8 months ago 5
Hey were u get the wheels stickers? are nice, I have the same bike and I'm looking for that kind of stickers.
Diego777Alex 9 months ago
I need to fine a exhaust like this one its sick. Is that undertail a regular Hotbodies undertail and you just covered up the hole and repainted its or it that the way it came from hotbodies? thanks
jumpnbean1 10 months ago
raspy little rat bastard
RedResurrections 1 year ago
is that bike in the background a honda vtr?
Nice bike btw ;)
Zidd1800 1 year ago
Holy shit that bike is so sick!!
NosoCOMINSOON 1 year ago
very pretty bike with the tail tidy and all
779LR 1 year ago
Dream bike
ndadash 1 year ago
i have this mode
l fell on it so many times its a wreck but i ride it daily and its still faster than most if not every one else on the road
13abyShark 1 year ago
nice
FahrradJens 1 year ago
how much ps ?
MrHeidend 1 year ago
Damn man that bike is Beatyfull and the sound of the engine is my music 5/5
DaMiAn3x4FUN 1 year ago
love the rc51 in the background
zero937 1 year ago
Man Id pay alot of money for that bike. Honda is never a let-down..
peterinfamilyguy 1 year ago
how much bro?...
achikdeen 1 year ago
@achikdeen Not building them anymore...not enough interest to continue. Thanks for the interest though!
Hamiltonrepsol 1 year ago 11
go race now !
XghostriderrX 1 year ago
cool
Edan3211 1 year ago
but i don't like the front of it
keiran6 1 year ago
good bike there mate look after it
keiran6 1 year ago
Hi dude..Im in love with the bike in the video..Im getting the same bike in a couple of months & decided mine HAS to look like that! ><" just wanted to ask a few things..
1) you make the exhaust for $550- is that correct?
2) where did you get the undertail from? or is the entire tail one piece?
3) did you get the swingarm & & aluminium bits powdercoated?
thanks.. my email is alvynsofjan@hotmail.com ..I live in australia, so if possible I'd like to pay for your services & shipping to me.
Alvyn82 1 year ago
love the ass on that bike... boner poppin' fun!! love the repsol
fcarabat 1 year ago
oh my fckn god this bike is awesome
aidas999 1 year ago
boner
deathrow209 1 year ago
do you make these for other people or is this just for your bike? and if you build to sell how much do u charge and what do u need if i wanted 1 the bike or header? i live in GA so i dont think i could bring u my bike. and awsome bike bro!!!!
motcrue1 1 year ago
@motcrue1
Thanks, I have not built any for a year or so. dont have the bike any more so dont have a anything to mock it up to to build....would have to have a bike to do it...sorry
Hamiltonrepsol 1 year ago
cream my pants
skater4circa940 1 year ago
@BakerFF225 Nope....I'm in UT
Hamiltonrepsol 1 year ago
my dreambike looks sweeeeeeet!and the sound omg :)
sagara1988 1 year ago
do you know what pipes they use for the motogp repsol team?
cant get them anywhere. i thought it was arrows but couldnt fin any on youtube.
but just today i saw that its not arrow. couldnt tell what it was cos it was blocked
rsoreo 1 year ago
@rsoreo they are custom hand made one off for there team. Nothing on those bikes are on any kind of production line.
Hamiltonrepsol 1 year ago
@Hamiltonrepsol
thanks. but ive seen a few brands labelling their products as gp exhausts.
so i reckon its the ones they really use in motogp
rsoreo 1 year ago
@Hamiltonrepsol
thanks for the reply.
so i guess the pipes with GP in their names are just marketing gimmicks
rsoreo 1 year ago
HolY shiT i just crapped my pants...;
compri 1 year ago
Sick bike!
Tractorracer5812 1 year ago
thats looks mean, great job man:D
monkeyinatree123 1 year ago
you still build them? moving to stg from vegas in fall.
lvgordo 1 year ago
@lvgordo Ya, will still build them but need ur bike to fit and modify.
Hamiltonrepsol 1 year ago
where can i get get one for my 06
zukiman77 1 year ago
YOu got any dyno figures ?
michaelball123 1 year ago
ohhh jizz
bagheadbaby 1 year ago
SWEET BIKE DUDE!!! GOOD WORK!!!
jireh100jewels 1 year ago
i dropped my jaw.
kaiwoon 1 year ago
beautiful bike!!! great sound!!
sparatapazzo 1 year ago
where can i get that exhaust?? please hit me back bro!!
bigghost27 1 year ago
@bigghost27 I build them...$550 and need your stock header to midify
Hamiltonrepsol 1 year ago
Nice bike with a sweet sound. I'm trying to find the loudest pipe, but still want a quality sound. Any one have any idea? I have an older bike, it's a 93 CBR 900.
LoveTheRoad 1 year ago
is this pipe available anywhere?
BAMunz600 1 year ago
where u purchase the exhaust? sounds good, lots of money?¿ message me if u can . thanks
RingerOFDeath 2 years ago
i have a 2005 cbr 1000rr i just put a m4 slip on exhaust on and the sevr o meter or whatever that is hooked to the exhaust that i took off made a red light flash fi on my bike now,,,what do i do,,there is no place to hook it back up now..help me
DiSwHiTeBoY2KrAzY 2 years ago
had to leave my servo on and plugged in and just pull all the cables out
Hamiltonrepsol 2 years ago
you said you had to leave your servo on so it must not have been fixed to the stock pipe then...or how did you leave it on.....and do you no if that red light being on effects how my bike runs
DiSwHiTeBoY2KrAzY 2 years ago
music to my ears
Eksirrob 2 years ago
Gostei onde ficou o reservatorio de oleo traseiro ..........a moto inteira fico show....parabens........
thony1000rr 2 years ago
nice mate very nice
RA20R 2 years ago
very nice!!!
xHotLatinoChiccox 2 years ago
nicest cbr pipe ive seen
very nice
the bike is also nice
ENJOY DAT SHIT
d1apbt 2 years ago
how about moving below the speed of 80kmh and using your cbr1000r? will it wheele?
jazz9019 2 years ago
1st and 2nd gear wheelies are no problem without the clutch
Hamiltonrepsol 2 years ago
i was just wondering, if u suddently press the throttle to max without pressing the clutch when moving, will the bike wheele it self? thanks....
jazz9019 2 years ago
Comment removed
n00bSLicer 2 years ago
Depends on the bike, and your speed.
n00bSLicer 2 years ago
the 09 sure as hell does almost back flps
HITMAN45742 2 years ago
sweet bike!!!
gretschfiltertron68 2 years ago
ohhhhhhhha pervers
UrBaNStYlE7 2 years ago
what does HRC stand for?
rush2905 2 years ago
Honda Racing corp.
Hamiltonrepsol 2 years ago
ussualy hate honda's but this bike is just beautiful.
arnaxsas 2 years ago
thanks! :)
Hamiltonrepsol 2 years ago
Just wanna ask, is this exhaust is legall? I mena if the police pulls u over, can they not do anything?
arnaxsas 2 years ago
here in Utah we just have to have some kind muffler material and i have 8" of baffle...so its legal
Hamiltonrepsol 2 years ago
looks to me like its a track bike, if you ever watch motorcycle racing, none of them have mirrors, mine dosent either
groves750 2 years ago
no its totally street...just hate mirrors! Just a distraction to me
Hamiltonrepsol 2 years ago
where's your mirrors? lol
erniethefart 2 years ago
how about a video of the nice 2004 RC-51 ???
seams to be on the corner by a trailer
; )
urudufusmisrael 2 years ago
Thanks...Thats the wifes Nicky Hayden edition!
Hamiltonrepsol 2 years ago
you have nice wife
motomaniak94 2 years ago
@Hamiltonrepsol your WIFE HAS A HAYDEN!!!! Wanna ditch her and marry me? <3
BrutalDavis 9 months ago
ouuu sh...:)i wanna have it too!!:D
llllllllllama 2 years ago
I'd kill for that bike
ROLNIKxPL 2 years ago
dry clutch can hear it
MrLIONWILD 2 years ago
sounds the same to me.
xjoewhitex 2 years ago
sexy bike dude...
ipodok 2 years ago
man that diffuser plate makes a difference :P
Take and leave it off is good with me lol
I watched this video when you first put it up and I just now saw that rc51 O_O
What year is he?
VMann420 2 years ago
Its an '04 Nicky Hayden edition and its for sale! that diffuser plate has been gone for a year and i machined a real nice aluminum end cap
Hamiltonrepsol 2 years ago
hi mate i`m in england...did u have to modify the bodywork to get the exhaust to exit motogp style and is it a one off? cheers
simoncbr900rr 2 years ago
Had to trim a little half moon piece out to clear it. no trimming is needed for the '06-07
Hamiltonrepsol 2 years ago
Very nice sound!
Precision2020 2 years ago
Its a Repsol Edition Honda
L4SD4S 2 years ago
cool!
nice exhaust
okamoto0010 2 years ago
....... erection ........ ^_^ sweet bike !!!
SurreaLityAthens 2 years ago
stupid question but where can i get an exhaust like this for my cbr and BTW beautiful looking and sounding bike
ScoobWRX04 2 years ago
It sounds angry... i bet you could scare the living soul out of some "HARLEY" guys with that "THING". That is a beauty with in the beast.
PS: OHH nice bike man.
zerotoxico 2 years ago 5
Why is it that the exaust has that metal mesh inside if it?
XxThexRiotxInsidexX 2 years ago
That is by far the sexiest, slickest meanest machine i've ever seen.
kny4eva 2 years ago
Damn man.... thanks!
Hamiltonrepsol 2 years ago
GODDAMN is that a nice bike! love the rims!
585balla 2 years ago
one of the best lookin street bikes I've ever seen by far
3L3CTR0static 2 years ago
thank you!!
Hamiltonrepsol 2 years ago
does anyone know if they make any 600 on the market (cbr zx6 gsxr etc. . .) like this where they have replicas of race bikes?
ktmracer100 2 years ago
Every company has them. And those are just replica plastics btw
protossenslaver 2 years ago
the cbr and the gsx r ;)
albiz94 2 years ago
name exhaust???
feHSUICIDE 2 years ago
I'm really amazed by this one, good work. How is the torque/power output using this exhaust system? Any chance of some dyno specs? ;)
Jietse 2 years ago
check out my other videos... there is one with the dyno runs
Hamiltonrepsol 2 years ago
get that diffuser plate outta there!
DmitriTheWise 2 years ago
i did already. machined a really nice end cap
Hamiltonrepsol 2 years ago
damnnnnnn man sickk bike
gig049 2 years ago
I kinda like her too....thanks!
Hamiltonrepsol 2 years ago
SHes Beautiful..
martinjacksonbbd 2 years ago
thank you!
Hamiltonrepsol 2 years ago
good way to wake a cop up from his nap!
gregger454 2 years ago
my ears hurt just listening to this vid. sounds great tho. undertail looks great too. i have the other one. looks great too but urs def looks nicer. good luck..
italianogq21 2 years ago
dude ur bike is sick
gcoxisexy 2 years ago
Thank you!
Hamiltonrepsol 2 years ago
nnnnniiiicccceeeee.....
Escud3ro 2 years ago
badass, i just messed in my pants a little!
yoyo2171 2 years ago
2004 kawasaki ZX10R Owner...
But, that is one BADDASS BIKE brother...
Love it!
CastingStonez 2 years ago
Very Impressive ride. Can I ask what Brand of front disk brake set up do you have on their. And what type of sprockets do you run it with?
trese0000 2 years ago
The brakes and gearing is still stock. The chain is a DID gold
Hamiltonrepsol 2 years ago
That exhaust sounds ferocious.
Even more so at 10 grand I'll bet.
GulfSeal 2 years ago
that is one sexy bike my friend. it makes a great sound
aznmav2 2 years ago
I like the custom fairings. I wish suzuki made some nice ones for the gsxrs.
Good exhaust too
PillowPanTs8490 2 years ago
Thank you!
Hamiltonrepsol 2 years ago
they did make some like that but they only made like 1000 bikes world wide... its those motogp suzuki farings the light blue ones
EINSATZGRUPPEN 2 years ago
Very nice bike. I love the Repsol replicas
juneya04 3 years ago
Absolutely impresive
3L3CTR0static 3 years ago
beautiful bike ... i love it
Rily23 3 years ago 2
how did u make that
melissa080106 3 years ago
RC51 in the background <3
TheMachRider 3 years ago
Hey brutha, sweet vid...
Goodtimes on the rides we've done. How's that kid doin'? Remember this day!?!
watch?v=UKNHwczf_UE
vegasstreetriders 3 years ago
thats goin to be a buzz for 5 min and then everyone will be like thats too loud
limwad 3 years ago
id leave the diffuser plate off, sounds better i think.
yomi1896 3 years ago
Did you build the exhaust yourself? If not where did you find it? KICKS ARSE!
dirtybob30236 3 years ago
I want to relocate my battery to the rear and shave the under side completely.
gsixty 3 years ago
Looks like you used the 'o8 Brake fluid reservoir?? Did you have to fab a new bracket? Tickets for side mounted plates are $110 around here.. I like your location!!
Great job btw.
gsixty 3 years ago
i used the 07' R6 rear reservoir.
Thank you very much for the compliments!
Hamiltonrepsol 3 years ago
email sent... thanks for the reply :)
rg94yota 3 years ago
do you build them to sell?
Dget01 3 years ago
Is that pretty much a strait pipe?
Dget01 3 years ago
there is 8" of baffle in the end.
Hamiltonrepsol 3 years ago
very nice :D
trixy07 3 years ago
Thats badass man!
cateyes711 3 years ago
Thanks! its a work in progress
Hamiltonrepsol 3 years ago
about 4 hours and $100 bucks
Hamiltonrepsol 3 years ago
hey, would you be willing to fab another one for my 04' 1000rr? would LOVE you for it! email or IM me at "rg94yota" at hotmail or any major IM.
pe@ce!
rg94yota 3 years ago
working on getting it dyno tested and a custom map built first. I would need your stock header to modify, and the plastic has to be trimmed also
Hamiltonrepsol 3 years ago