How To OverClock An Intel i5 750 Quad Core (@3675.03Ghz) with P55 Gigabyte Motherboards

[FellTheSky]

hey men, i have a p7p55-m mobo, it supports 2200 memory, now i have a core i3 540, and im thinking it in upgrade to a core i5 2500, however, i can get a trade with a friend, and get this processor, the question is, do you think the i5 750 OC, can get closer to the i5 2500 at gaming?

[keiki646]

@FellTheSky for oen you can't compare the i5 sandy bridge processors against the Lynfield processors (switch lacks PCI express lanes support) the i5 2500 is a much better processor and faster but 15%

[candycandy57]

IS GIGABYTE GA-G41MT-S2P LGA 775 Intel G41 Micro ATX DDR3 1333 Desktop Motherboard ABLE TO OVERCLOCK CAUSE IM GETTING ONE

[gustavopipito]

DP55WB is possible to overclock?

[keiki646]

@gustavopipito Yes it possible but do note, that please beware that intel motherboard are not like aftermarket motherboard, You may or may not have a limitations

[Salukiegaming]

were is the program from

[zZoiks]

@Salukiegaming i think you'd best give overclocking a miss.

[callepro]

"DRAM (if 1333MHz overlock to 1400Mhz set voltage to 1.64Mhz)" what do you mean? where do i overclock it to 1400mhz?

[callepro]

I also wanna overlock my i5 750 (2.67ghz) processor. I have 4gb ddr3, windows 7 32 bit, Motherboard: P55-UD3 and a normal stock fan for my CPU i think, will replace it with a proper one before overclocking though, what should i set all the settings to, i wanna overclock it to atleast 3.00ghz preferably if possible, more. How do i do it?

[keiki646]

@callepro maybe you should not ask me and watch the tutorial instead

[masisrules]

i was wondering, im running a core i5 750 at 3.3ghz and if i wanted to make it 3.5 or 3.6 do i have to change everything or just change too 170mhz or 175mhz with same settings?

[wungfu12]

Will this overheat my computer? ~ Just curious.... also if you could help me.... I have 3 LED fans ~ one under power supply ( in back ) 2 on sides ...... And my computer will go to 60-70C (if i over clock it with Easy Tune6 to the green one which for me is: 2.8Ghz by runing game with lowest resolution and it still does. Itll make the game very slow and shit.... idk how to fix this?? And does that mean that way will also overheat it? Thanks for reply :)

[keiki646]

@wungfu12 Sorry but manual is and always have been the best option in O.C the system. Now for heat issues< well now if you have a good CPU cooler and it works well(and I am not talking about a stock Intel cooler) aftermarket CPU cooler are the best for overclocking in this stage. Please be ensure that you will either see a temp increase with the Voltage for the CPU has to increase for stability but with an aftermarket CPU cooler it will work just fine. Just follow the sets and no short cuts, Ok

[Crysis2ful]

Hi I want to overclock my CPU (2.66GHZ I5-750). I want to get to 3.4 Ghz. I bought the Arctic Cooling Freezer 13 heatsink. My setup: ATI 6950 2GB, 4 GB DDR3 1333 (Corsair), I5-750 2.66, Corsair GS600 (PSU) (+12 V = 48A).

I want to know how should I set the BIOS parameters. Thanks for your time.

[keiki646]

@Crysis2ful if you want this video on a video I will post here, look for it. it will show you how to set your base clock and block frequency to where you will like it. 3.4 is about 155 or 158 base block frequencies and make sure you enable tthe load Calibration for the voltages

[takumisensei]

Thanks! So far so good. If my computer burns, that's okay. I buy new motherboard and i7 :)

[deviljnk]

is there any software for it?

[masisrules]

@deviljnk there is software out there but its not recommended as the settings in the bios might not be 100% accurate to how they should be.. stick to the old fashion way.

[cirusMEDIA]

Dude.. i couldn't see half of what was taking place there!!! :(

[NWewok]

Can you leave on the Virtualization Technology and still have a stable overclock?

[keiki646]

@NWewok you can if you want

[NWewok]

@keiki646 Should I change other settings to or can I just leave on Virtualization Technology and  Do what you did in the vid. And will it get hotter with Virtualization Technology?

First time :P

[keiki646]

@NWewok you can disable it if you like but your not going to be using Virtualization in the first place

[alcantara13]

what is the password for windows ?

[mritunjaymusale]

does this harm or jam our pc



[lapierreb]

You cant tell anyone that "those" setting will work on every machine... you got there a low VID processor... which will help you a lot on OC it.

[coram2007]

normally it's 3575 Mhz because 20x175=3575 Mhz

But 21x175=3675 Mhz

So there is a mistake I think no ?

[keiki646]

@coram2007 no, I have it on a 21x so it;s 3675 if it on 20 it will be 3575

[calipo50]

may be but with my gygabit I had the same setting it depends on the cpu (

[calipo50]

me 4337 mhz 1.40 (max 68°)

21x215

imc 1.30

ddr3 1643 1.55

asus sabertooth i55

[keiki646]

@calipo50 fail! YOu fail due to this is a gigabyte video and not a ASUS sabertooth video

[X41N3]

@calipo50 1.4V max 68c wtf?

when i used the auto tune feature on my p7p55d-e deluxe the i5 760 reached 4ghz at 1.37~V and within just 5 secs it reached 74C according to speedfan.

As for cooling, i'm using the corsair H70 so tell me..how the fuck did u do that?

BTW 4ghz stable at 1.232V here

[calipo50]

@X41N3 cpu + noctua noctua nh sand-d14

I am stable at 4 ghz 1.26 OCCT me that I use

[calipo50]

@X41N3 I haf 922 case is a rather well and that cools

[lukestratton1]

What is the music?

[keiki646]

@lukestratton1 E.S. Posthumus - Lepcis Magna

[Bezemkast33]

@keiki646 Will this run 100% stable? No crashes garuenteed?

[scizorrr]

Hi. This tutuorial works and overclocks it, but after a while, if I leave my coputer alone and it goes into standby, whne I click the mouse and try to bring it out of standby, all my computer does is make a whirring sound and then appear to turn off.

Then 5 seconds later it will make awhirring sound again and appaear to turn off. This will continue until I turn off the power.

Then when I turn it back on it says an error occured due to overclocking and it sets back to 2.85 ghz again.

[sk8rdude985]

i think the title is a little misleading

[nawaz2kx]

nice soundtrack

[xinc89]

Hi, I have 1600Mhz memory, how should I adjust the setting to get it running at 1600Mhz while maintaining the same cpu speed? Thank you!

[teamkenmei]

Should I get Gigabyte MB?

cause i found the core i5 750 with a MB with it, called intel DP55WB Motherboard

Would these settings work for that as well?

[keiki646]

@teamkenmei Sorry to be some blunt about it but you didn't pay attention to this video did you ? This is for Gigabyte motherboards, Not Intel MB and Intel MB for limited on how much you can overclock

[teamkenmei]

@keiki646 I know that this video is for gigabyte mb, I'm not stupid

I'm just asking if the same process your doing would be similar to an intel MB that's all

[keiki646]

@teamkenmei clearly the answer is NO

[bjmagnus]

Lol, title fails. Saying; 3675.03GHz lol

[andrei847]

very useful your video,especialy for those who own gigabyte mobos

[rsetiono]

First sorry for double posting :P

and second, yes you are correct i think i over voltage my CPU and my RAM. Last nite i have reduce it (but i need to sacrifice my BLKC core speed and), I am thinking to run my i5 in daily to 3.56Ghz, temp is arond 28-33 Celc degree.

I forgot about the setting, but i have print screen it on my desktop. Later will show it to you. Anyway, i just go to your channel and surprise that you are a woman and you like to do this OC thing?!? Cool....! Thumbs up! :)

[rsetiono]

hi, I am using Gigabyte P55 UD5 (BIOS F10), below is my setting to hit 4058 Mhz : LLC : Level 2 CPU core : 1.43750v QPI/Vtt core : 1.420v DRAM volt : 1.700v QPI Clock ratio : 32x System Memory Multiplier : 8.0 CPU Clock Drive : 900mV PCI express Clock drive : 900mV I have try your set up there, but its always failing. I dunno why. Maybe is it becoz of my memory? I am using GEIL DDR3 ULTRA PC3-17000 2133MHz C9 Timing that i have set for my mem : 9-9-9-28

[keiki646]

@rsetiono First and foremost that you are very much over voltage right now. On top of that you are mostly not using watercooling. everything is too high for the setting you have provided me here. Default and never go over 1.4v (or less you watercooling)

QPI/VTT is ony should be at 1.25-1.30v

on top the the CPU voltages 1.35v should be enough for 4.0GHz

listen I have another video here that will should you how to overclocking the right way but you must listen and understand.

[keiki646]

@rsetiono Go on my channel and look for How To Overclocking Intel i5/i7 CPU Processors, it a new video for you extreme overclockers

[FingerTech]

On the ram latency time wouldn't using 7, 7, 7, 24 be much faster than using 9, 9, 9, 24?

[keiki646]

@FingerTech But yes true but is the MHz is higher than 1600Mhz , Like I have G.Skill Trident Extreme Performance 2000MHz Gaming RAM at 9-9-9-27, I have better FPS and faster, look at my updated video posted on 3D Mark score video I have posted

[IrishTopgun12]

I havw my i5 750 running at 3 Ghz with at 150x20 and i increased the voltage by one step from 1.21 to 1.28 or something simular. Do you think ill be ok.My temps at 100% load are 55 C*.And ill probably want to go to 3.2 or 3.5 Ghz soon.I just never am sure how much voltage to add.

[keiki646]

@IrishTopgun12 You're using the stock heatsink are you? at 3GHz at 1.28 is too much. Might want to think about replacing that stock heatsink that is if you are using it.

[IrishTopgun12]

@keiki646 Im using a Scythe Yasya (if you dont know it its about as good as the Mugen 2).Id like to have sevral Bios Profiles with different steps of an OC. So

Profile 1 : 3 GHz (150x20) @ 1.25v (ive lowered it to 1.25 do you tink i need more/less?)

Profile 2: 3.3GHz (166x20) @ 1.26v (ok? +/-?)

Profile 3: 3.675 GHz (175x21) @ 1.275v (is the voltage ok?and is it ok to set multiplier to 21?)

Thanx for your help.

[keiki646]

@IrishTopgun12 Now in this case I would used the 3.3GHz setting for 24 hours and do a Prime95 test for more than 12 hours and a memtest86 for about 16 hours to make sure there is a stable system.

[IrishTopgun12]

@keiki646 Ok ive run Prime95 with no errors and temps were never over 64°C.

now i wanted to get the 3.66 GHz Profile done,so i set multiplier to x20 and Base Clock to 180.But when im in Windows CPU-Z(and CoreTemp) shows that im at 3.8 GHz with a multiplier of 21 eaven tho i set it to 20. (voltage @ 1.27v)

[keiki646]

@IrishTopgun12 Make sure that you have a few thing disabled in the BIOS like Turbo Boost, EIST, with the 21X multiplier - the turbo boost will automatic enabled itself so it's will be best to sure 20x and to adjust the Memory MHz settings too

[keiki646]

@IrishTopgun12 keep note that this are the things that needs to be disabled, Turbo Boost (Make sure you sure a 20x Multiplier)

Turbo Boost - Disabled

CPU Enhanced Halt (C1E) Disabled

C3/C6/C7 State Support - Disabled

CPU EIST Function - Disabled

Not sure what Ram you have 1600MHz or 1333MHz

But make sure you so some adjustments To the system Memory Multplier (SPD)

I will make another video in a few minutes to explain why

[IrishTopgun12]

@keiki646 I have all these settings disabled except C3/C6/C7 Support.

I'll see if disabling helps.I have DDR3 1333 RAM and have the Multiplier at 6.0 (so its running @ 1100) dunno if its safe to set it to 8.0.thanx

[IrishTopgun12]

@keiki646 wow now im eaven more confused.In Coretemp and CPU-Z it shows as 3.8 GHZ but in my result of 3DMark06 it shows as 3.66 GHz.weird :P

[keiki646]

@IrishTopgun12 really why is that CPU-Z shows you what you have change in setup up the BIOS at an 21x Multiplier. When you are using the 21x Multipler you enable turbo boost. The system shows that but whatever programs that you are using it will always using 3.67 or 3.66GHz. Turbo Boost is when the software or program that you are using at the time needs a little help and that is when Turbo Boost comes in

[DiarmaidSC]

@keiki646 yeah but i have the multiplier in the bios at x20 and turbo boost off.And CPU-Z always shows 183x21.

[speedyks255]

@combatkirbyh that's because one cpu is diferente from the other. I have a i5 750 at 4.0GHZ with a voltage of 1.24, on air, and some cpu's don't do the 4GHz in less then 1.3.

as to the vcore, just keep giving more untill it gets stable

[bdavis2446]

i have a i5 750 and is overclocked to 4.1 ghz on air with a asrock motherboard.. and this thing is fast.

[webfugitive]

What is the sweet spot for retaining stock voltages with this setup ?

... or is it 3675 ?

[neroinaction]

what is overclocking?

[nawaz2kx]

whats this song called?

[SkISl0pE]

@nawaz2kx E.S. Posthumus - Lepcis Magna

[nawaz2kx]

i'm running at 4ghz :) dude your bios really needs updating

[yowiesan]

man great tutorial. I copied exactly step-by-step and just wondering, in cpu-z, my Memory Channel #: is Single when it suppose to be Dual channel ddr3 memory?

[nawaz2kx]

turbo boost enabled and virtualization tech. disabled? lol who taught you how to overclock..

[bungeegums]

your voltages are vcore 1.20000V qpi/vtt 1.150v PCH 1.050 CPU PLL 1.800V i dont get these numbers CPU Vcore 1.2000V - 1.2500V QPI/VTT is at 1.1500V - 1.2000v PCH Core 1.050V - 1.230v CPU PLL 1.800V - 1.860V - 1.880v you put 1.2000V to vocre not 1.25000

[bowarrful]

can you use stock cooler if u want it to go to 3.2ghz?

[Maxbladee]

@bowarrful ya but watch temperatures with prime should not go above 75 degrees

[SiaSound]

See the anime this song was on?

[keiki646]

@combatkirbyh

[700gsteak]

why did you switch off virtualization? Just a precaution or does it not work when oc'ed

[keiki646]

@700gsteak Yes and NO, there is no need for the Virtualization

[touchdowntexas13]

So the stock frequency is at 3.675 GHz correct? That would put the turbo boost somewhere in the neighborhood of 4 GHz right? That's impressive.

However you did have to disable all of the power saving features. The i5 750 is awesome with its power efficiency. I would have left all of those features on and just gone for a 3-3.2 GHz stock clock with turbo on. But that's just my personal preference.

Cool video by the way. Are you planning on overclocking your RAM timings?

[thevlaka]

hi mate

i have a gigabyte p55 ud6 and 2400 ram and a i5 750 was wondering how to overclock seeing as the ram speed is only 7 7 7 18

[donerhaarlem]

Hello.

thanks for the instructions but i tried this settings and just after booting windows 7 64x i get a blue screen of death...

setup is

Core i5 750

mugen 2

Gigabyte p55a-ud3

Team Elite 4GB DDR3-1333

coolermaster real power m520

do you have any suggestions why this fails?

[caltake1]

It seems your CPU is 1000x faster than any other i5... Most people only get theirs up to 3675 MEGAHERTZ.

[keiki646]

@caltake1 @caltake1 well I have mine at 4.2Ghz the link to my updated video as of May 22,2010 is in the information box above

[caltake1]

@keiki646 You don't seem to realize what I'm saying. In the video title, and in the description, it says 3675.03 GHZ, or gigahertz. People with your chip have been able to reliably get to speeds of 3670 MHZ, or megahertz, a gigahert is 1000 megahertz.

[keiki646]

@caltake1 I did understood what you were saying. Yes people with an Intel i5 750 with a gigabyte motherboard are able to reliably get 3.6Ghz

[caltake1]

@keiki646 You still seam to insist that your rig can operate at 1000 times that.

[keiki646]

@caltake1 Do me one thing and please quit while you're ahead right now. Everyone here knows that it's at a clock ratio of 3675MHz. Why are you adding words to my sentences and mouth. You're the only one here making a fool of yourself right about now but causing troublesome feedback that everyone is aware of.

[20ID]

@keiki646 Your exact title, copied and pasted:

"How To OverClock An Intel i5 750 Quad Core (@3675.03Ghz) with all Gigabyte Motherboards "

[nawaz2kx]

@caltake1 some get 4.4ghz :)

[imthentertainer]

Would this work on a computer made by Gateway? I'm afraid that it would blow up :(

[keiki646]

@imthentertainer NOOOOOOOOOOOOOOO

[imthentertainer]

@keiki646 Great thanks for the help =___=

[keiki646]

@imthentertainer Let me tell you another thing about computer information like this. You have Gateway computer that has a low end Intel motherboard. This video is for Gigabyte Aftermarket Motherboards. You system will not even have an Overclock menu in your BIOS.

[davynfinity93]

wow

[dani83bp]

thx man!

[eliran1]

Another stupid question, will this work (nothing over clocked), if i use both different types of MHz RAM, example: 2Ghz 1333MHz and 2Ghz 1600Mhz?

if works, if i over clock my computer, do i have to configure each ram slot differently?

and 1 last question :s, i heard it is possible to overclock my video card "ASUS EAH4850 512 MB DDR3", is that true?

[keiki646]

@eliran1 MSI afterburner is the program to overclock the GPU Core and Memory Clock pass it's limited but the 4870 was a RV700 artitech GPU so I am not fully sure if it works with 4850 card but I am sure enough to know it does work on 5000 series cards. But just use the ATI driver call CCC to overclock it

[eliran1]

hi, this might be a stupid question, i dont know much abt bios & their settings, just how 2 change boot order. I never touch the other settings, but i want 2

I have the new GA-H57M-USB3, i5 750/2.66Ghz/8MB/LGA1156, 4GB DDR3 1333Mhz.

Will this video work for the new GA-H57M-USB3 motherboard?

[keiki646]

@eliran1 @eliran1 For one GA H57 mobo are difference from P55 Mobo's so you need to find out that information yourself, but if you want to change a boot order like for Hard drives then you will need to go into integrated Peripheral in the BIOS

[eliran1]

@keiki646 Thank you for your reply. :)

[Crysis2ful]

Hello. how do I know if intel turbo boot is active. I i5 750 2.66? help

[keiki646]

@Crysis2ful Are you even paying an attention to the video. Advance CPU Core Feature will have Turbo Boost, Enable is Active and Disable is Deactive, Next time pay close attention because the answer is right in front of you

[herhhh]

@Crysis2ful You did not watch the whole video.

[keiki646]

note that you can either pick X36 or X32 for QPI Clock Ratio

[Bezemkast33]

well my pc crashed once using this, but i had the voltages wrong

[keiki646]

@Bezemkast33 Yes I am going to say the same to you about the Voltage

[Mdot1982]

what kind of music is that called? it's good stuff. is it orchestra stuff? movie music?

[keiki646]

@Mdot1982 It's E.S Posthumus

[ysatria]

nicely done :-))) very useful!

[keiki646]

@ysatria THANK YOU

[GreeneMan510]

Good stuff.

[keiki646]

@GreeneMan510 thank you

[keiki646]

For those that can't read the numbers

CPU Vcore 1.2000V

QPI/VTT is at 1.1500V

PCH Core 1.050V

CPU PLL 1.800V

DRAM (if 1333MHz overlock to 1400Mhz set voltage to 1.64Mhz)

DRAM (if 1600Mhz overlock to 1700MHz set votlage to 1.64V

If not overclocked then set it to 1.56oVoltages

[xfm766]

thanks for this mate. I appreciate your assistance.

do i need to overclock the RAM?

Im only new to this and have read a few articles and seen a few youtube vids but everyone seems to have a different method.

[keiki646]

@xfm766 Ok if you were just viewing this video you can clearly see when you overclock the CPU you can see the Memory Multiplier change as you overclock for the Base Clock.

[xfm766]

thanks for the clip but im having problems reading some of the numbers too. the video is a little blocky and i cant tell the diff between 0's and 8's the numbers are hard to read. I am looking to do this on my i5 750 too but as a first timer i dont want to put the wrong numbers in. Can i ask you to clarify some of the figrues i cant read please?

[keiki646]

@xfm766 In the more Info I wrote down the Voltages

CPU Vcore 1.2000V

QPI/VTT 1.150

PCH 1.05 or 1.10

PLL 1.800

[keiki646]

@rodrocket2009 You're the only one saying that you can't see it and everyone else says that they can see it clear.

[Mupp1t]

great video 5/5

[keiki646]

Thank you are the comment, alot of people ask me to make another one and the more people ask the more I was like ok one more and the final one...

[IHunger4Battle1]

It might be a perfect BIOS overclock for YOUR CPU, but every CPU is different and won't overclock the exact same way. 5/5 either way.

[keiki646]

@IHunger4Battle1 This is for Only Intel i5 Quad Core, In the last 3 weeks I have build 3 Intel i5 Quad Core Gaming RIG's, One for my friend KOU and the two others were clients that ask me if I can help them and the system for overclocking I did the same and I have Prime95 all three system and memtest86 and no errors

[IHunger4Battle1]

@keiki646 I understand that bud, but if someone has a bad batch of CPU, they could overheat and burn up their chip...I just think you should strongly urge people to overclock gradually rather than going full bore and ruining a great chip.

[keiki646]

Oh I've fully understand what you are saying.

one client wanted me to overclock it to 4.0Ghz and just told him the truth that it would be recommended that I would like to overclock the system to at lease 3.4Ghz. After explaining to him everything about airflow of the case and etc, she thought it would me good that I would overclock his system at a nice overclock ratio. So his temps are in the mid 30's to Late 30"s on idle, full load is low 50 's and late 40"s. (his case is a antec 900

[keiki646]

Quote " she thought it would me good that I would overclock his system at a nice overclock ratio." He not she