hmmmm this is one way of over complicating mixer channel gain, easier to just automate the mixer tracks that way you have full control of the fader through out the whole track ( starting all your channels at 0db is a bad idea anyway )
yo make sure the sample is being played while you talk, i couldnt get it working for a bit too but then i just realized i wasnt looping the sample. if that doesnt work, make sure that the mute button isnt selected on both peak controllers (on the bottom right). hopefully that can solve it for u snallis
Well I can't hear anything, but when I make a mp3 out of it it seems to work, cuz it's very much alike what the vids shows... I can't hear while I'm doing it in fl studio for some reason...
I've tried to do this a few times but failed. I've even downloaded the FLP to try if it works. But I can't make it work, I'm doing something wrong but I can't find it out. Everything seems to be right. I am following the instructions right... *HELP REQUESTED*
5. Formula controller for subtracting Peak 1 from Peak 2.
6. Crowd noise output to speakers.
What I would like you to do is follow the above numbers until you get to the point where you get no sound, contoller don't work, can't figure it out, etc.
If possible, disable any suspect plugins if you think they are killing your sound. Then tell me where you are.
it wud be easier for me to use audacity and adjust the volume with envolope or fade in fade out feature...voices sound electronic almst...still cool trick.
I think the way you did it sounds kindda fake, i mean its too programed and usually the crowd goes by the feel. But its a cool way how you did it though
ROFL @ Blee-otch. Dude, your tutorials are awesome! I don't know how you figured out this live crowd simulation, but thanks for sharing just the same. :-)
The "Circle of Fifths" or "Cycle of Fifths" It's a very useful tool showing the musical relationships between notes. (A different, more useful way to measure distance)
If your sound driver supports it you can just choose your microphone as an "input" for a mixer channel, and then record the voice using Edison or the disk icon at the bottom of that channel. You might need to use ASIO drivers.
2. Make sure you are recording from Mic, and not Wave out. This is not an FL Setting! This is a windows sound settings property on the Recording page. Important!
BLIACTH! LMAO Great tutorial man
MrSOSbeats 1 month ago
can u send me the flp
Iwantapplez109 4 months ago
Lmfao wow!...that was THE greatest joke of all time
leimaru11 8 months ago
heyyyyyyyyy youtubbbbeee
chubbychubbdub 1 year ago
this looks useful for rising pads that come after a bass or piano sound , thanks for tutorial
jmm1233 1 year ago
lol How are you feeling tonight, citizens of EARTH(!?)? Looks like an alien visiting our plant.
ilhadosmacacos 1 year ago
LMAO! ble-ach!
mikesslob 1 year ago
that was fun thanks homie.
muzikbiz001 1 year ago
ble-ach lol
MRBKNUMBER1 1 year ago
can someone send me a link or tell me where i can find crowd samples ???
MistaSly 1 year ago
Where do I get the long and short decay plugins? I can't find them at all
MyNameGreg 1 year ago
great vid!
MidiRain 2 years ago
1:10
WHO DONE IT
Goldbloodeddragon 2 years ago
HEY does anyone know where the actual crowd cheers are
Wine30 2 years ago
yeah! the fifth circle in the background!
RufusLoacker 2 years ago
hmmmm this is one way of over complicating mixer channel gain, easier to just automate the mixer tracks that way you have full control of the fader through out the whole track ( starting all your channels at 0db is a bad idea anyway )
fukdyamum 2 years ago
@fukdyamum Na-ah. Not if you want that distorted sound and/or do instrument recordings.
alexpietkiewicz 1 year ago
doesnt make a dfference, even distorted sounds shouldnt clip
fukdyamum 1 year ago
i like
fizzo9191 2 years ago
Uhh i did not understand anything =( i really want crowd noises =S
BboyUBP 2 years ago 2
Lol! good shit
tigga510 2 years ago 2
just stick the mic outside for more sounds lol good tut btw
BKkillaz 2 years ago
image-line magician.. nice yet again..
osoar215 2 years ago
with what FL studio version you made your tutorials?
Topulis91 2 years ago
LMAO!!!!!! BLIATCHHH
KaCeBeatz 2 years ago 15
lol, that "hey youtuuuube" at the beginning cracks me up :D cant really comment on the vid tho - my internets not letting it load past 9 seconds
resindrummer 2 years ago
wtf cycle of fifths in the back
OxidaneProductions 2 years ago
it's the circle of fifths.
AquaDonkey 2 years ago 2
Wow, you got charisma, man.
Great tutorial!
lost4soul 2 years ago
bliotch lol!
zxq12 2 years ago 2
1:10 siren outside o.O
AreForFilms 2 years ago
yup
JonAndCallum 2 years ago
This has been flagged as spam show
Check Out My Songs
Check Out My Songs
Daniel8295music 2 years ago
bloeoeeuurgrgrggg
all4trance 2 years ago
Awh man, I'm still laughing at that joke, did you write it yourself?
As always, great tutorial.
HelixMusic 2 years ago
yo make sure the sample is being played while you talk, i couldnt get it working for a bit too but then i just realized i wasnt looping the sample. if that doesnt work, make sure that the mute button isnt selected on both peak controllers (on the bottom right). hopefully that can solve it for u snallis
killapheen 2 years ago
Well I can't hear anything, but when I make a mp3 out of it it seems to work, cuz it's very much alike what the vids shows... I can't hear while I'm doing it in fl studio for some reason...
Snallis 3 years ago
Look at your audio settings, then click on ASIO settings. If your audio has an X next to it, you need to close all other programs that use sound.
Kermit4Prezident 2 years ago
Thanks for the tip man, appreciated
Snallis 2 years ago
I've tried to do this a few times but failed. I've even downloaded the FLP to try if it works. But I can't make it work, I'm doing something wrong but I can't find it out. Everything seems to be right. I am following the instructions right... *HELP REQUESTED*
Snallis 3 years ago
Ok, the main elements of this are:
1. source sound (mic)
2. Crowd noises
3. Peak controller 1 (fast)
4. Peak controller 2 (slow)
5. Formula controller for subtracting Peak 1 from Peak 2.
6. Crowd noise output to speakers.
What I would like you to do is follow the above numbers until you get to the point where you get no sound, contoller don't work, can't figure it out, etc.
If possible, disable any suspect plugins if you think they are killing your sound. Then tell me where you are.
AcePincter 3 years ago
it wud be easier for me to use audacity and adjust the volume with envolope or fade in fade out feature...voices sound electronic almst...still cool trick.
massergiomusica 3 years ago
Nice one =)
DuskY1991 3 years ago
I think the way you did it sounds kindda fake, i mean its too programed and usually the crowd goes by the feel. But its a cool way how you did it though
pointer3x 3 years ago
nice one
pvictoradrian 3 years ago
where can I get short decay and long decay, cuz I can't find it?
Snallis 3 years ago
Love your work man! :)
Great tuts..
adamdren 3 years ago
thats actually a good joke. lol
NitroRhino 3 years ago 3
where can you find those crowd sound? :D
essejilen6 3 years ago
There are more Ace's on youtube then I thought lol
AceBobcat 3 years ago
GHETTO. I heard a siren lol
ta6ron 3 years ago 16
ROFL @ Blee-otch. Dude, your tutorials are awesome! I don't know how you figured out this live crowd simulation, but thanks for sharing just the same. :-)
TavinFan 3 years ago
Whats that pie chart of notes on your background called?
Sockheadrps 3 years ago
The "Circle of Fifths" or "Cycle of Fifths" It's a very useful tool showing the musical relationships between notes. (A different, more useful way to measure distance)
AcePincter 3 years ago
BLEE-OTCH!! lmao!
But really, awesome tut! :D
RastafarianPilgrim 3 years ago
There are hundreds of people, then suddenly only 15...
Devourer09 3 years ago 5
Yeah, pattern 2 is a screaming crowd, and pattern 3 is a laugh track. It's to demonstrate the versatility, not the realism.
AcePincter 3 years ago
I know, I just thought it was funny.
Devourer09 3 years ago 2
yo
can someone help me...i cant seem to get any sound...
PLEASE HELP
asap
mischiefproduction 3 years ago
hey man, i downloaded it and opened the file in fruityloops, i see nothing lol
can you help
BlackmailTV 3 years ago
bro, i use a midi-keyboard. the prob is, the output sound is comin out a bit late...!!! help me...!!!!
jcent06 3 years ago
Try using ASIO sound drivers, or go into your "Audio settings" and decrease your "output latency"!
AcePincter 3 years ago
yo thats awesome man!
youse a smart mofo aintcha? haha
BLEEOTCH!
renegadetrip 4 years ago
the way you pronounced the word "bleach" cracks me up? is that funny word you said "bleach"? haha
kalsikum 4 years ago
Yep. Bleach "Blee-otch"...
AcePincter 4 years ago
hahahaha that was awesome
skatekid501 3 years ago
lol
I hope i never sound like that in front of a crowd ;)
great tutorial though, you really know your flstudio :)
jasonbrianmerrill 4 years ago
This was a good tut. How would I record lyrics for a song?
salcidorob 4 years ago
If your sound driver supports it you can just choose your microphone as an "input" for a mixer channel, and then record the voice using Edison or the disk icon at the bottom of that channel. You might need to use ASIO drivers.
AcePincter 4 years ago
Cool. Well I got that set up, but I'm getting a lot of feedback when the mic is on. Any tips? Get new mic?
salcidorob 4 years ago
1. Play your song in headphones.
2. Make sure you are recording from Mic, and not Wave out. This is not an FL Setting! This is a windows sound settings property on the Recording page. Important!
AcePincter 4 years ago
Thank you once again!
salcidorob 4 years ago
:( you mean FL studio is better than reason 3? great ! i have to start learning Fl studio now that i know Reason 3 a bit :)
btw how's the quality of instruments and other sounds in FL ? in reason i can see it's not so good .. can you export Loop as audio format in FL?
nesch1 4 years ago
yes
GrimeGalore 2 years ago
FREAGING CRAZY LOL
socal04 4 years ago
probably no more reason tuts. I will, however, do some music theory tutorials which will be useful to any software user.
AcePincter 4 years ago
looking forward to these.
DubQWST 4 years ago
awesome hehe! looking forward to them. i might start trying to use FL using your tuts ;). thanks for this.
mrpeeman 4 years ago
Thanks man! I liked your voice-over. :)
mjakobite 4 years ago
2 thumbs up.
Jhaakri 4 years ago
Excellent, as always. This is UgoZg, signing off.
UgoZg 4 years ago
super tutorial even if i don't use the software it was very interesting ;) 5 stars
flashguru 4 years ago
Awesome man. i cant see myself using it but it sure looks fun :D
Your tutorials are the best, keep 'em coming :)
yauluhim 4 years ago
I don't understand how you did that, but all I know is that the final outcome was COOL as hell! Great job!!!
MakeItFunkyProds 4 years ago
Bro, I explained everything I did! Thanks anyway - try it sometime!
AcePincter 4 years ago
awesome, now i can go on tour, thanks haha
evolvi 4 years ago