RC ADVENTURES - BRUSHLESS TOURING DRIFT CAR-PT #6 TAMIYA TT01 R KIT CUSTOM KIT

[TheDudewithskillz]

Build another one but with carbon pattern instead of chrome on the paint and I'll buy it for 650 us cash.

[TTibble]

Wow. blue and chrome. exactly what I wouldve done. Nice

[ngcheexiang97]

this use fuel?

[BeastlyGremlin]

@djmedic2008, Did you change the gears for your brushless setup, that props sounds stupid, but yeah?

[DarrenDiAntonio]

Looks cool and fun. How much does a good car kit that can last long cost approx?

[Halomotionex]

If you want the aluminum parts go to eBay and search for either Yeah Racing or 3 Rancing of GPM racing or XSPEDE TT01 parts and you will find like a whole kit or seperate parts but makesure you read which one you are buying like if your getting parts for the TT01 D or type E or just the normal one... If you own theory final TT01 and you got parts for the TT01 D just go online and buy the TT01 D spare parts bag B and change it out.

[babofettdude]

Hey i finished everything building wiring etc but wen i give it gas the motor doesnt turn the gear to turn wheels i need help asap

[djmedic2008]

@babofettdude Does the motor turn at all when it is not attached to the car? Power? Maybe you didnt put the diffs together right.. or turn the screws all the way in. It could be catching on something. make sure your gear mesh is not to tight

[babofettdude]

Haha just finished mine like ten mins ago

[luisvazquez95]

nice car i have a one and iam going to do the same thing as u. were did u get those alui parts at?

[kill4kill2kil]

make a playlist for ep1 to the last ep

[krispikreme]

Thanks for the videos it will come in handy Im doing a 3 racing Chassis conversion with a yeah racing aluminium full conversion with a mamba max pro and 7400 kv motor do you think thats a good setup ?

[MacPro8CoreMan]

@DJmedic2008 Great vid, I learned a little about a lot. Good job on the paint. I've been considering one of these or an Ofna JL10e GT. Just want for parking lot bashing and speed runs. Both are really low price, I can't decide. Do you know which chassis will handle the most power? Again GREAT vid!

[MacPro8CoreMan]

@FerdieFB23 if your not drifting Castle Creations has released an unbelievable combo 1/10 Sidewinder V2 S2 ESC W/CM36 540s in a wide range of Kv. The best part is they'll take huge NiMH sticks as well as up to 3s LiPo. OK the REAL best part is the price at less than $100.00!!!

[costahydro]

Hey when you going to drift it

[FerdieFB23]

Nice TT-01 setup.

At the moment my TT-01 runs on lipo and 2.4ghz with the only nescessary hop ups, but the only thing I still need is a brushless motor and ESC, then I'm all set.

I have 19T brushed in my TT-01 right now, of course I also need the right gears when I'm going brushless.

[EdAk333]

was it much expensive?

[slopeone]

mate you need a carbon upper frame which goes on top of your gear box covers helps to keep the chassis straight ya know and maybe camber adjustments for the front?? just throwing it out there bro??

[djmedic2008]

@slopeone you do realize.. this video series is years old... right? I dont even have this car anymore.. lol

[DriftingIsMyHobby]

lol medic u are the ish brother keep this stuff coming

[CB850FOUR]

OK OK OK so i had a typo Sorry !!

[gatzuberserker]

how much did this car as a whole cost?

[starcraftluver62]

you're awesome lol

[luvbigexplosions]

hey i have a tt-01 D and i have replaced the steering servo + other steering parts and i still have extreme wobble and movement in it which is cause ing it to wonder in random directions its still 95% stock how can i fix it so will will go in a straight line and not in random directions

[IceBlack406]

@luvbigexplosions my is doing the same? maby we just need to exchange all front parts to alu.

[luvbigexplosions]

@IceBlack406 ok thanks i will try and give that a go

[IceBlack406]

@IceBlack406 because there are much space between the linkage 

[erin051]

@luvbigexplosions can u show me a vid of whats happening? i might help u....

[JuniorPros118]

do you ever sell any of your RC's?

[mangaliewa]

nice rc

[CB850FOUR]

you should learn how to pernounce Celica 

[djmedic2008]

@CB850FOUR you should learn how to spell pronounce

[aelitasweet]

@djmedic2008 hahahahahahahaha

[MrUsedTampon]

@djmedic2008 lol, nice one man.

[hoegen]

@djmedic2008 Ouch!

[erin051]

@CB850FOUR ==== PRONOUNCE! NOT PERNOUNCE! LOL!!!!!!!

[djmedic2008]

@meatloaf396 Hey meatloaf.. truthfully man.. I dont really like touring, racing or drifting.. I know its a great part of our hobby.. but I find it incredibly boring. I have filmed and actually driven the cars.. and yes they are amazing pieces of technology.. but I really enjoy being outside flying, bashing, trailing or rock crawling. The race / loop thing just doesnt turn my crank..

[richardshug]

thank you for the video thats very nice of u to put it out to help others

[thuren96a]

Hi wher do you have bye all of thiss ??? Can you send mi a link ore a adres

[pedz0675]

Really i want to thank you for the Video.....

[danyboy786]

hello

[kavehmoh1238]

i hope you know this but if you add more stuff you need a biger battery

[djmedic2008]

@kavehmoh1238 ummmm... did you see I used a 5300mah 40c 2 s lipo?

[GUYANESE102]

i need some help i took out every thing from my camaro and i dont know what to do

[djmedic2008]

@GUYANESE102 do you have a camera ? Send me a pic of what you have, and the pieces you have, and Ill do the best I can... Email me at my website under "contact us" Website in the side box >>

[Matcham11]

that servo is fast heh

[AlexsDamnFilms]

I need some help, i got a skyline r34 tt01d chassis and the front wheels are kind of misplaced, like one is in the other direction then the other a little bit, also the steering servo turns more one way then the other. For the wheels I re-did all of the measurements perfectly but still one wheel is pointing in the other direction! So when i drive straight it turns to the side....

[rikuwillkillu]

you should get a s14 body or s15

[EmperorOfHonour]

i really think u should put a servo saver on your rc car b-coz even if u are quick enough to react and turn the car away from the wall

it will still run into it because da tires r slippery

if u had those soft tires

dat wuld b a different story

[xXShadowRejectsXx]

he did put one on lol

[djmedic2008]

but I did swtich it out X.. for no other reason than to run both options during filming

[xXShadowRejectsXx]

oh lol!

[xXShadowRejectsXx]

take that back lol

[AlexsDamnFilms]

Which ERH is this? is the the 40 street or riverglen one?

[djmedic2008]

its one of the same.. just 2 locations

[AlexsDamnFilms]

So i can mention medic at either one and i will get a deal? :)

[djmedic2008]

For the Medic discount.. you have to call them.. at the 40th Street location

[gbman892]

That is a very nice kit! I am new to this legit RC car hobby and have been doing some research and found your videos. As a noobie looking for a first kit, i was wondering if you could reccomend any kits of that type that are most versitile with upgradeable parts such as those alluminum pieces, gears, or bodies. I am intirested in the 1/10 size, and could use some help.

[djmedic2008]

my friend, why dont you try this kit? You will have a general guide as you go along. Try just the stock build first..add the electronics,and radio. and see if you even like the hobby. its a ton of fun. Then if you decide you want to get the upgrades. you can see here some of your options. There is a link to a hobby shop in the info box >>>> you can find Tamiya kits at the shop. If you call Eastridge Hobbies and mention my name"MEDiC" they will give you a deal on parts and kits =) Have fun!

[gbman892]

Cool. Thanks!

[DocoTaco190]

who makes that mirror chrome?

[farhanxaxau]

how much does it cost for the yeah racing parts..

[djmedic2008]

I spent about $250 CDN for the aluminum parts (including shipping)

[TachyonDriver]

So far, so Very good!

[djmedic2008]

Thanks Tach :-)

[TAPICTURES]

Verry Good

[men28yoo]

wow..... you make color by car ;-),and i love color this car....

[SamuelFletcher]

why dont you out a alloy steering sutup in it?

[plorwax]

its almost done!

[noremorse126]

awesome build

[farhanxaxau]

wow.. its nearly to an end.. why the film is coming out in january 10th 2010.. damn!!! i must wait then.. 5 star for u..

[djmedic2008]

January 2nd my friend :-) Not too far! But a great way to kick off a new year!

[bayareaaxialcrawler]

nice paint is that a celica body

[djmedic2008]

lol.. check at 9 seconds in - I believe the word used is celica =)

[langer1972]

You make some of the best vids on rc's that I have ever seen!!!!Cheers from Indiana.

[bro577]

sweet..but i have like several questions..for a newbie..where would you suggest going to guy an RC?..and what brands do you suggest?

im not into like the rock climbers, but or tunner replicas..

[traxxasslash26]

i suggest you go to your local hobby store, and ask them ask many questions as you can to understand this hobby.

there are soo many brands.. but here are some good ones for cheaper lower prices

Traxxas-great inexpensive/customer service

Hpi-cost alittle more than traxxas

Tamiya-Cost ALOT mainly due to buying the electronics yourself.

Team Associated-Very good cars, race class, but expensive..

btw: RTR-ready to run

ARTR-Almost ready to run

kit-build from scratch

[sputnikwood]

can't wait.

[diggerfreaky]

bonus vid pls

[ERYKiSTACHU]

good video

but!!!

do film how it drive :)

5*

[TraxxasRCFreak]

Great job on the car medic, its looking great! How did u attach the fan heatsink to a power scorce, did u just change the plug so it can hook up to the receiver?

[trainboy414]

cool vid but personally i would see if the esc would fit where the receiver is because it would lower the cog

[djmedic2008]

good point.. ill think about that..