@darbmonkey perhaps they didn't like the idea of it rattling around in the tube. probably they figured that they could peel off some wax and lose pellets into the trigger mechanism.
I have a question so I thought I'd ask a man who could properly address it. As far as performance, is there any difference between a wax load vs. a cut shell? From experience, I'd say the major difference would be range, more being with the wax load as well as better ejection. However at present, that's just my hypothesis. Gun on!
Ever thought of showing these rounds in geletin? I for one wonder how they act on impact. A slow motion shot from the side into Geletin would clearly show this.
just like anything that we use in the world today is tested to its extreme before its let out to the public .... example metal baseball bats are tested with a 200mph baseball before its sent out to the little leage ball field you dont think the weapon manufacters dont find out how far they can push there own equipment . Barry keep doing what your doing its fine . And nice shooting
these videos are great and the wax slug is genius keep it coming brother don't listen to people on here.
guys i'm sure that with all the firearms experience he has he wouldn't post up something that would that would hurt somebody.
he also did mention that the cut shells where a "fall back plan" when the proper ammo wasn't available back in the day so lets not go getting our panties in a bunch. i think its cool and i learned something from watching keep it up.
@ThrowingSpoon I think a lot of people have speculations about the cut shells who have never tried them, just overthink what can happen. Let's say the cut shell gets lodged in the barrel as it starts down the barrel, it would just blow open the crimp at the end and shoot normally after that, so essentially it has a built in safety all ready.
@Swagman00 any smoothbore gun wont leave that bullistic footprint on the slug anyway so if thats what you want to avoid the old 12 ga. is the best choice!
great video and good job! plan to do the same with a lot of old bird shots laying around the house, cheap and effective way to do slug practice! thanks and keep up the good work!
@saik0pod You can pick up some paraffin wax at the grocery store. Look in the canning section, canning jars, canning lids, wax...
I would think if you used enough glue to work it would skin over on top and never set up in the center. That would be a mess to clean out of a barrel. And wax is cheap.
Hi Barry, Just curious can't you just open the shell and pour wax straight into the pellets without removing them. Also I have a rifled barrel shotgun when you fire shot out of it at 25 yards you might get one pellet hit the target just wondering if you would know if putting a removable full choke on it would tighten up the pellet spray many thanks mate.
what is the spot about halfway between the shooter and the target that appears when he shoots at 1:16? right where the tire tracks start in the grass. its only there for a flash
You were using target shells, are those less strong than regular? It looked like the wax shells have plenty of power also. Would this modification be acceptable for hunting? Also the mods in the previous two vids?
The hissing sound as the slug goes down range, I get the same thing from Federal Top Gun wax slugs I made. Is that noise from the wad staying attached to the slug as it travels? I don't get that noise from Lee cast slugs or any factory slugs.
Im guessing that the effect is that the slug deforms and sprays the pellets afer impact... would it be better than a standard slug?? probably perfect for zombie slaying
just subscribed to your video's and i have to say they are awsume. This is great i gotta try it on my 410 single shot. 1 in chamber 3 inbetween fingers and 6 in a stock shell holder i made. i do drills and have gottin pretty good that i can shoot my ten pretty close to that of a pump. I gotta try this too.Now off to watch all your vid's.
People are telling you that'll blow up a shotgun? Wow. Dumb people. #1, wax doesn't add enough weight, and isn't going to swell or anything strongly enough to make the wad stick. #2, target loads typically run around 8,000 to 9,000 PSI, often less, compared to the 11,500 maximum. You would need to add at least a fifth of an ounce of extra weight, to even get up to the maximum. You'd need to add a LOT more than that, maybe 1/2 oz. or more, to be in any danger. Not going to happen with wax.
Awesome video, but I have one question, can I shoot the wax slug in a gun that is chocke operated? if yes which chocke should i use ? thx and please keep your good video up :)
vary nice almost frangible would do nice on a bad guy in a home defense hmm should try shooting some at mock wall see how it does over bird shot and slugs
Love your videos Barry, I could not tell if you were cycling the wax slugs in your pump later in the vid? Are the waxers safe to cycle in a pump magazine? I see they are fine in a saiga mag so I was wondering if you should single shot with a pump or if you can load them in a pump mag?
tried it with my 30 inch beretta teknys, 3 1/2 inch 10 shot group at 50 yards. This makes a very good range round. and thanks for showing me that hi point
tried it last week! Easier to make than I thought it would be, I didnt spill as much as Barry! However, I was not nearly as accurate with mine as he was.. at 50yards I had a 12inch group out of a 20" bbl side by side 12ga... going to try some more today, made some more and I was a little more careful to keep the top cut off more uniform perhaps that will help. Thanks for the vid!
@k3nm3ist3r Im trying to put a rail on my wifes ATI sultan,My problem is there are no pre drilled holes and I see 4 cresent shaped indentions on either side of the rear sights(bead and backbone type) Do you know if these indentions are used for mounting rails/scope rings?the shapes are very simular to this )III( )III( the lines are the rear sights.
@swenner64 Full choke will be fine. I just don't like shooting them out of a modified choke of any type of any shotgun with interchangeable chokes of any kind. I will be making up some 20 gauge ones and shooting them maybe this sunday is all goes according to plan. Thanks for watching. You always make direct and meaningful comments.
@tomterahedrob It may be in the works at some point buy don't hold your breath. I'm still kind of small time right now, but I have a very good following. It's getting to the point where I can't go in Walmart without someone approaching me and asking if I'm the Youtube guy.
my grandad used axel grease instead of wax, he taught me how to do both.....the grease is just easier on the barrel and it stays inside the wad so you dont really get any grease in the barrel.
I have SOME reservations about the cut slugs, mostly because the OD of the shell is about .080" bigger than the ID of my shotgun's muzzle. I've made up some of these wax slugs and plan to film those in slow motion in the future. These seem just as nasty as the cut slugs.
@Iraqveteran8888 Thank you for those very interesting videos. I can not wait to try them out. As you said, If you need to go deer hunting, and do not have any slugs, this is the way to go. Thanks
i was just wondering if this would work after seeing the cut shell video. i was just at the range yesterday and tried a cut shell through my friends break action 410 pistol. i wonder what a cut shell would do coming out of a judge? feel free to make a video on that one i would like to find out.
@bonesword98 They can be loaded and cycled in the action no problem. He was running them through the magazine when he was shooting at the gallon jugs.
@bud1014 It's funny you say that. I recently discovered his channel and it surprises the hell out of me how many subscribers and views he has for what he posts. I know machine guns are popular and stuff, but it seems a little suspicious that he gets a hold of the stuff that he does. People don't care about learning things anymore, they just want to be entertained.
@Iraqveteran8888 watch?v=4g8uN3wIsMU that video tells you how he gets a hold of most of the guns he shoots. I'm not trying to get a bunch of people to his watch his videos but I watch his and yours along with a bunch of others too and like them all. Keep posting the great videos. Love the Lost Art of cut shells videos, and the Sporter Mosin as I made one myself.
@zunkted Eh....Whatever floats your boat. I guess I'm a little jaded, because I'm ex-military, but FA is not all it's caked up to be. Give me a 130 year old piece of yak greased caked iron and steel and I'm happy.
nice video guys... dont pay any attention to all the crybabys and safety sally's... these videos rock, and barry's a badass... i wouldn't want to even be in the same county as him if he was on my ass with a shotgun ! lol
I dont understand the benefit to this. Suspending shot in wax is suposed to make? It seems to me it behaves just like a normal lead slug would. When I first saw "wax slug" I thought maybe it was a country boys less lethal thing like you would shoot a dog off your chickens with but guess not.
I honestly wouldn't have believed these could be effective in any way unless until I'd seen this video, you sure showed me! This looks like awesome fun and thank you for reviving these 'lost arts'. Great work!
The reason these are "lost arts" is because now I can go down to Wal-mart and pick up a box of rifled slugs. Thse tricks were used when slugs did not exist the way we understand them today. I guess it is never a bad idea to have information of the old ways though. You know know when you need a slug but only have some bird shot handy.
I saw the comments from the "expert" claiming the cut slugs create a "barrel obstruction". That's like saying any projectile is a barrel obstruction. Great video guys. I forgot to do a slow-mo test of the cut slugs this weekend. dernit.
really cool cant wait to see how you make them just one question i have inter changeable chokes on my shotgun what choke should i use when shooting slugs
Can you make this from reloadable hulls? I reload so I hate cutting up hulls. It's such a waste when it can be used again. I'm thinking I may thry this with a over shot card on top of the waxed shot and crimping the hull like I normally do will give the same results without cutting the hull up.
people are such babies crying about someone is going to get hurt. when you modify any ammo there is a risk but shit happens. good video don't let the safety sally people stop yall.
This will be extremely helpful in a survival situation such as SHTF. These shells AND wax are availabe at most gas stations where I live
flipflopking56 4 hours ago
when you use the wax loads does it leave a lot of gunk in the barrel?
hungeredone 18 hours ago
Hell...... youd think it would make that pump shottie boot like a mule, didnt appear to though ....
LPtheDESTROYER 1 week ago
I noticed you loaded each shell individually on the pump action. Is there any reason its a bad idea to load 5 in the tube mag on a remington 870?
darbmonkey 1 week ago
@darbmonkey perhaps they didn't like the idea of it rattling around in the tube. probably they figured that they could peel off some wax and lose pellets into the trigger mechanism.
bf2lover42 1 week ago
I have a question so I thought I'd ask a man who could properly address it. As far as performance, is there any difference between a wax load vs. a cut shell? From experience, I'd say the major difference would be range, more being with the wax load as well as better ejection. However at present, that's just my hypothesis. Gun on!
DreamReaper338 1 week ago
I'd like to see these going through ballistic gelatine in slow motion :)
MrSzymonSz 2 weeks ago
This has been flagged as spam show
Ever thought of showing these rounds in geletin? I for one wonder how they act on impact. A slow motion shot from the side into Geletin would clearly show this.
Tinman253 2 weeks ago
you shot those out the saiga? i thought all modified shells would fail to feed
ShepsAlmighty 2 weeks ago
just like anything that we use in the world today is tested to its extreme before its let out to the public .... example metal baseball bats are tested with a 200mph baseball before its sent out to the little leage ball field you dont think the weapon manufacters dont find out how far they can push there own equipment . Barry keep doing what your doing its fine . And nice shooting
5100mikeb 2 weeks ago
the zing you hear from the shot sounds badass
aklane666 3 weeks ago
Thank you! made 50 of these. I cracked a basketball size rock in two. Very easy and powerful! btw my choulder has a 4inch bright red bruise, lol.
nalBleeding 3 weeks ago
Not bad for an improvised slug.
RatkoUSA 3 weeks ago
barry is a bad ass old man.
these videos are great and the wax slug is genius keep it coming brother don't listen to people on here.
guys i'm sure that with all the firearms experience he has he wouldn't post up something that would that would hurt somebody.
he also did mention that the cut shells where a "fall back plan" when the proper ammo wasn't available back in the day so lets not go getting our panties in a bunch. i think its cool and i learned something from watching keep it up.
ladyfeind 4 weeks ago
hey berry tell the critcs to fuck off
banjoman
banjolimy 4 weeks ago
Don't wanna meet that guy in the parking lot!
rednex108 1 month ago
gotta love remington target loads... cheaper than dirt :)
mrkawi624 1 month ago
So is there any truth to the pressure blowing up the receiver from cut shells?
ThrowingSpoon 1 month ago
@ThrowingSpoon I think a lot of people have speculations about the cut shells who have never tried them, just overthink what can happen. Let's say the cut shell gets lodged in the barrel as it starts down the barrel, it would just blow open the crimp at the end and shoot normally after that, so essentially it has a built in safety all ready.
taofledermaus 1 month ago in playlist Firearms & Weapons
really awesome stuff! thanks for the videos guys, I finally get a break from the outrageous slug prices!
nozman1 1 month ago
Hi guys, looks like fun. You have to hold over much at 100yds with those wax slugs?
miniaddict12 1 month ago
excellent. kinda like homemade safety slugs.
aseglkj 1 month ago
How is it cleaning the wax residue out of the action in the semi auto? Does nitro solvent take it off???
lowriderchevy7 1 month ago
this is an old hunting trick, depends how much wax you use. Usually was used in hunting ducks (half a spun of wax).
Kahur2007 1 month ago
I bet the feds love watching this knowing that it makes ballistic fingerprinting of the wax slug near impossible.
Swagman00 1 month ago
@Swagman00 any smoothbore gun wont leave that bullistic footprint on the slug anyway so if thats what you want to avoid the old 12 ga. is the best choice!
montanaflytyer 1 month ago
When the slugs hit, does the shot break up inside the target?
ThinkFaster66 1 month ago
great video and good job! plan to do the same with a lot of old bird shots laying around the house, cheap and effective way to do slug practice! thanks and keep up the good work!
fordtractors4100 1 month ago
ballistics gel on wax slugs. please! i love these things.
drumONdrugs23 1 month ago
very nice, i enjoyed that alot!
TONYROCKSME 1 month ago
@Iraqveteran8888 I don't have wax, but can I use Gorilla Super Glue as an alternative? Please advise. 12ga shells
saik0pod 1 month ago
@saik0pod You can pick up some paraffin wax at the grocery store. Look in the canning section, canning jars, canning lids, wax...
I would think if you used enough glue to work it would skin over on top and never set up in the center. That would be a mess to clean out of a barrel. And wax is cheap.
fishreelez 1 month ago
wow, thats awesome =D definitely some awesome shootin by mr barry haha
VivaLaBamUrDead 1 month ago
Hey, I saw your comment saying that you dont like shooting these threw modified chokes and guns with interchangeable chokes, whys this?
Outdoorsman351 1 month ago
out standing sir! i have never seen this done before im very impressed
irishtank24 1 month ago
This and all the lost art vids are very interesting!
stelbats 1 month ago
Hi Barry, Just curious can't you just open the shell and pour wax straight into the pellets without removing them. Also I have a rifled barrel shotgun when you fire shot out of it at 25 yards you might get one pellet hit the target just wondering if you would know if putting a removable full choke on it would tighten up the pellet spray many thanks mate.
Mike
mikecappelli 2 months ago
what is the spot about halfway between the shooter and the target that appears when he shoots at 1:16? right where the tire tracks start in the grass. its only there for a flash
joshdrobny 2 months ago
weird sound
spam1712 2 months ago
anybudy know what kind of bench rest that is and where i can find one??
floridayank22 2 months ago
Ya'll ever thought about showing how to load rock salt loads?
misoharny 2 months ago
love the sound it make when the wax fly!
Ec0topia 2 months ago
i am wondering, when these hit the target, do the pellets sort of spread apart? would this cause more damage too the target on impact?
angryace13 2 months ago
Just asking, why not interchangeable chokes like IMP, or Cyl. I am asking because I was going to shoot them in my Stoger O/U 20 ga..
MrAndrewsiii 3 months ago
Can i rent barry as an uncle for a day?
MuhsinTheMomin 3 months ago 19
i would like to see what these things do to a side of beef!
srlbbggg 3 months ago
Hmm, It is hard to find 10 gauge slugs. I find mostly 10 gauge bird shot.
Thinking I will have to try this wax slug .
How does the barrel handle the wax over time ?
frankgon4 3 months ago
500 yards with a scope wax slugs ?????????
glennwih 3 months ago
You were using target shells, are those less strong than regular? It looked like the wax shells have plenty of power also. Would this modification be acceptable for hunting? Also the mods in the previous two vids?
1anthonybrowning 3 months ago
The hissing sound as the slug goes down range, I get the same thing from Federal Top Gun wax slugs I made. Is that noise from the wad staying attached to the slug as it travels? I don't get that noise from Lee cast slugs or any factory slugs.
lutnit 4 months ago
I'm sure this has been asked but what kind of camera do you use?
savagenomore 4 months ago
Im guessing that the effect is that the slug deforms and sprays the pellets afer impact... would it be better than a standard slug?? probably perfect for zombie slaying
InnerSilence123 4 months ago
watching the effect of this in ballistic gel would be awesome
InnerSilence123 4 months ago
I really wish I had my old 20 back :\
TheWhoaDude 4 months ago
just subscribed to your video's and i have to say they are awsume. This is great i gotta try it on my 410 single shot. 1 in chamber 3 inbetween fingers and 6 in a stock shell holder i made. i do drills and have gottin pretty good that i can shoot my ten pretty close to that of a pump. I gotta try this too.Now off to watch all your vid's.
swc64844 4 months ago
There's nothing special about these shells, over say Winchester or Federal value-box stuff, right?
MOLRobocop 4 months ago
Transfix this a brick wall? If not, you discovered how to cheap produce frangible equivalent slugs!
LNVacilotto 4 months ago
People are telling you that'll blow up a shotgun? Wow. Dumb people. #1, wax doesn't add enough weight, and isn't going to swell or anything strongly enough to make the wad stick. #2, target loads typically run around 8,000 to 9,000 PSI, often less, compared to the 11,500 maximum. You would need to add at least a fifth of an ounce of extra weight, to even get up to the maximum. You'd need to add a LOT more than that, maybe 1/2 oz. or more, to be in any danger. Not going to happen with wax.
arrkhal 4 months ago
Awesome video, but I have one question, can I shoot the wax slug in a gun that is chocke operated? if yes which chocke should i use ? thx and please keep your good video up :)
LebaneseHunters 4 months ago
vary nice almost frangible would do nice on a bad guy in a home defense hmm should try shooting some at mock wall see how it does over bird shot and slugs
camerl2009 4 months ago
@MrLakewind2012
I wouldn't bet my life on this.
omegapoint777 6 months ago
Love your videos Barry, I could not tell if you were cycling the wax slugs in your pump later in the vid? Are the waxers safe to cycle in a pump magazine? I see they are fine in a saiga mag so I was wondering if you should single shot with a pump or if you can load them in a pump mag?
WritinBookz 6 months ago
tried it with my 30 inch beretta teknys, 3 1/2 inch 10 shot group at 50 yards. This makes a very good range round. and thanks for showing me that hi point
nw00738 7 months ago
Make some nice defensive rounds..
wat720 7 months ago
SHOOT SOME BALLISTICS GELL!! I wanna see what it does :C
peepeevagi 7 months ago
Great vid, but how come you don't like firing them through a modified choke? If it's a fixed modified choke would it be ok??
HeavyJ318 7 months ago
Comment removed
KERNFUZED 7 months ago
Comment removed
KERNFUZED 8 months ago
tried it last week! Easier to make than I thought it would be, I didnt spill as much as Barry! However, I was not nearly as accurate with mine as he was.. at 50yards I had a 12inch group out of a 20" bbl side by side 12ga... going to try some more today, made some more and I was a little more careful to keep the top cut off more uniform perhaps that will help. Thanks for the vid!
k3nm3ist3r 8 months ago 5
@k3nm3ist3r Nice thing about it, is there are cheap enough you can shoot the hell out of them and not go broke.
Iraqveteran8888 8 months ago 7
@Iraqveteran8888 Is the recoil much more then a regular target load?
CollapseSakanade 3 months ago
@k3nm3ist3r Im trying to put a rail on my wifes ATI sultan,My problem is there are no pre drilled holes and I see 4 cresent shaped indentions on either side of the rear sights(bead and backbone type) Do you know if these indentions are used for mounting rails/scope rings?the shapes are very simular to this )III( )III( the lines are the rear sights.
thanks
MrBLADEFOOT 2 months ago
Made them in 20gauge easy. Do you think these would have any problems from a full choke? Thanks for your channel.
swenner64 8 months ago
@swenner64 Full choke will be fine. I just don't like shooting them out of a modified choke of any type of any shotgun with interchangeable chokes of any kind. I will be making up some 20 gauge ones and shooting them maybe this sunday is all goes according to plan. Thanks for watching. You always make direct and meaningful comments.
Iraqveteran8888 8 months ago
here's a question, Can you just use an empty hull and primer and just fill it up with wax and use it like that?
Umimugo 8 months ago
danm man you're awesome!!!
maxiborgaro 8 months ago in playlist FIREARMS related
Thank you !!! I always thought there was merit to this idea.VERY USEFUL channel you have.I hope you make a dvd of all your vids so far and sell em!
tomterahedrob 8 months ago
@tomterahedrob It may be in the works at some point buy don't hold your breath. I'm still kind of small time right now, but I have a very good following. It's getting to the point where I can't go in Walmart without someone approaching me and asking if I'm the Youtube guy.
Iraqveteran8888 8 months ago 9
i wouldnt wanna be at the end of tht
bballbaby771 8 months ago
so is that a slugger barrel or what? i only have two barrels for my mossberg, so im curious.
poormanprepper 8 months ago
Another excellent vid ;-) keep up the good work
nickglotus 8 months ago
I would love to see how hard they hit some thicker steel.
CaptAmerica11 8 months ago
Those things really hiss as they go downrange !
762gunr 8 months ago
Very cool! very lethal!
lovesara850 8 months ago
Another great Lost Arts video. Keep it up!
toj66 8 months ago
Is there any way for you to do a test of those shells on ballistics gel? Would love to see how the shot displaces after impact.
Bawana2006 8 months ago 2
Comment removed
varng1 8 months ago
my grandad used axel grease instead of wax, he taught me how to do both.....the grease is just easier on the barrel and it stays inside the wad so you dont really get any grease in the barrel.
varng1 8 months ago
i want to see how many layers of dry wall and fiberglass insulation that will go through
SkidinDingo 8 months ago
Ok, I thought it wouldn't be lethal in the beginning but once I saw that was a steel target I learned I was wrong.
Dalwhinnie15 8 months ago
Ok, I thought it wouldn't be lethal in the beginning but once I saw that was a steel I learned I was wrong.
Dalwhinnie15 8 months ago
I have SOME reservations about the cut slugs, mostly because the OD of the shell is about .080" bigger than the ID of my shotgun's muzzle. I've made up some of these wax slugs and plan to film those in slow motion in the future. These seem just as nasty as the cut slugs.
taofledermaus 8 months ago
does the shotgun in the video have a rifled barrel?
martywhitevan 8 months ago
I love the sound these make haha might have to try this. What kinda shotgun is that?
RussianAmericanArms 8 months ago
Jeez. Homemade slugs kick ass!
TheIzzysteve 8 months ago
with your videos you should get more views awesome vid keep up the good work
backelskin89 8 months ago 5
@backelskin89 Eh...All my subscribers are class "A" people. I have the best subscribers. Quality over quantity.
Iraqveteran8888 8 months ago 27
Talk about frangible! Good zombie killers for the price of a box of trap shot and a candle!
MrROTTENJUGGALO 8 months ago
Ray likes that saiga 12 i dont blame him....Ray is the man! Barry too
dills2403 8 months ago
Barry is my superhero.
WarMachine550 8 months ago
where to get more information on the lost arts. thank you
odinn62 8 months ago
@odinn62 The OOOLLLLLDDDDDD SCHOOL.
Iraqveteran8888 8 months ago 11
@Iraqveteran8888 Thank you for those very interesting videos. I can not wait to try them out. As you said, If you need to go deer hunting, and do not have any slugs, this is the way to go. Thanks
CaptAmerica11 8 months ago
Man those wax slugs does a hell a lot of damage.
blueman4444444 8 months ago
this totally eliminates the need for a rifled barrel?
dammitcrap 8 months ago
i was just wondering if this would work after seeing the cut shell video. i was just at the range yesterday and tried a cut shell through my friends break action 410 pistol. i wonder what a cut shell would do coming out of a judge? feel free to make a video on that one i would like to find out.
ihearvoices22 8 months ago
These look like some fun guys to hang out with. Keep making fun and informative video.
Iam4armalitem15 8 months ago
I would love to see how these are made. Once the "slug" hits the solid target, will it fragment out to deisperse the shot throughout the target?
crocksrock101 8 months ago
Eric,
I noticed Barry hand feeding at the beginning of the video, can those not be cycled through a manual magazine?
Thanks Rick
bonesword98 8 months ago
@bonesword98 They can be loaded and cycled in the action no problem. He was running them through the magazine when he was shooting at the gallon jugs.
Iraqveteran8888 8 months ago
@bonesword98 I noticed that too... thought maybe the wax would gum up the primers or something? But if it works it works, I guess.
spugintrntl 8 months ago
AWESOME!!! thats all I have to say
daveyboy126 8 months ago
Erm, is it just me or does the report sound like a supersonic round sent down-range? Distinctive crack.
SpecJack15 8 months ago
Would those work in a rifled barrel?
Gungeek 8 months ago
I'm on his team when the zombie apocalypse starts
Goatoftheforest 8 months ago
was that auto at the end?
williamED15 8 months ago
Thumps up my friends. You won't see any this on fpsrussia channel..... that fake.
bud1014 8 months ago
@bud1014 It's funny you say that. I recently discovered his channel and it surprises the hell out of me how many subscribers and views he has for what he posts. I know machine guns are popular and stuff, but it seems a little suspicious that he gets a hold of the stuff that he does. People don't care about learning things anymore, they just want to be entertained.
Iraqveteran8888 8 months ago 4
@Iraqveteran8888 watch?v=4g8uN3wIsMU that video tells you how he gets a hold of most of the guns he shoots. I'm not trying to get a bunch of people to his watch his videos but I watch his and yours along with a bunch of others too and like them all. Keep posting the great videos. Love the Lost Art of cut shells videos, and the Sporter Mosin as I made one myself.
zunkted 8 months ago
@zunkted Eh....Whatever floats your boat. I guess I'm a little jaded, because I'm ex-military, but FA is not all it's caked up to be. Give me a 130 year old piece of yak greased caked iron and steel and I'm happy.
Iraqveteran8888 8 months ago
@Iraqveteran8888 Yea same here, I'm happy with the oldie's also.
zunkted 8 months ago
nice video guys... dont pay any attention to all the crybabys and safety sally's... these videos rock, and barry's a badass... i wouldn't want to even be in the same county as him if he was on my ass with a shotgun ! lol
rosssheetmetal 8 months ago
Very nice !!!!
auburn5978 8 months ago
My dad said he did this one time in Vietnam. Said it took a man's arm completely off...
icebergnotsoslim 8 months ago 2
dude barry is the shit
locknloadvideo 8 months ago
Who the hell is claiming that it spikes pressure!? He's full of it!
1999CSVT 8 months ago
Fuck the naysayer's, keep up the good work guy's.
klesmer 8 months ago 2
another badass old guy that'll rip yo nuts off and feed em to ya!!! go army!!!!!
eastoneagle75 8 months ago
What could you expect ftlbs. wise from those?
cwbyfan223 8 months ago
I dont understand the benefit to this. Suspending shot in wax is suposed to make? It seems to me it behaves just like a normal lead slug would. When I first saw "wax slug" I thought maybe it was a country boys less lethal thing like you would shoot a dog off your chickens with but guess not.
MarksmanCentral 8 months ago
I'm sorry, are these slugs made of ordinary wax (made by bees)? Did I understand right?
CZXh 8 months ago
@CZXh Paraffin wax....Video on making them coming soon.
Iraqveteran8888 8 months ago
@Iraqveteran8888 cant wait
poormanprepper 8 months ago
This is very interesting. Subscribing like right now.
Coffeeandasmoke 9 months ago
What about a wax rocksalt slug ? that would be a motherfucker with a gutshot
erklaerbaer01 9 months ago 2
The south will rise again. ;)
hangemhigh2000 9 months ago
Cool, I liked the part where the water jugs explode.
z3160200 9 months ago
Holy, fucking, shit.
Wulf8933 9 months ago
nice ......
pakifucker999999999 9 months ago
I honestly wouldn't have believed these could be effective in any way unless until I'd seen this video, you sure showed me! This looks like awesome fun and thank you for reviving these 'lost arts'. Great work!
SporadicallySane 9 months ago
The reason these are "lost arts" is because now I can go down to Wal-mart and pick up a box of rifled slugs. Thse tricks were used when slugs did not exist the way we understand them today. I guess it is never a bad idea to have information of the old ways though. You know know when you need a slug but only have some bird shot handy.
Jesses001 9 months ago
Also to appreciate how ingenious and imaginative people were back then.
We're no sons of idiots by any means.
Skullchaser08 9 months ago 2
lol awesome and ingenuous way of making a 12 gauge slug please post the how to video thanxs and god bless
26014hg 9 months ago
love ur lost art vids pal.....thx for sharing
maniaque007 9 months ago
OUCH !!!!!!!!!!!!!!!!!!
vince38curious2 9 months ago
That's interesting. Can't wait for the 'how to video'.
OneMansSanctuary 9 months ago
Wouldn't the wax gunk up the bore a little more than normal?
sadeater 9 months ago
@sadeater i would think the barrel would be too hot for the wax to stick to it, thus blowing any excess wax out of the muzzle.
SNIPERSTEVE420 9 months ago
Wow!
honda8354 9 months ago
Well.......can't wait to see how to make those!
Georgiapine2A 9 months ago
Beautiful
glennwih 9 months ago
Great informative video, always interested in seeing something different. Thanks for sharing.
ThePatriotGunner 9 months ago
loving the lost art series! hope to see more..
HellbillyCuntryMusic 9 months ago
Is that a stock Saiga 12 trigger?
MotorCityPrepper 9 months ago
I saw the comments from the "expert" claiming the cut slugs create a "barrel obstruction". That's like saying any projectile is a barrel obstruction. Great video guys. I forgot to do a slow-mo test of the cut slugs this weekend. dernit.
taofledermaus 9 months ago
really cool cant wait to see how you make them just one question i have inter changeable chokes on my shotgun what choke should i use when shooting slugs
regards yammo12
yammo12 9 months ago
@yammo12 You should never use any choke when firing slugs, especially when using regular lead or sabot slugs.
Simply unscrew any choke you have on before using slugs.
109268 9 months ago
@109268 thanks for that info but would i damage the threads in the barrel if i shot a slug without having a choke screw in
Regards
yammo12
yammo12 9 months ago
@109268 actually its perectly fine to shoot with a choke on, says it right in the ammo box.
desighnedmilitent 9 months ago
Cant wait to see how these thing are made man shit like this is why your one of my favorite channels.
GotAmmo21 9 months ago
As always, great video and information. Barry isn't doing much to save his ears with those muffs up on his temple though :)
bapabob 9 months ago
Amazing, shotguns are awesome weapons. Good video
thawkins426 9 months ago
Can you make this from reloadable hulls? I reload so I hate cutting up hulls. It's such a waste when it can be used again. I'm thinking I may thry this with a over shot card on top of the waxed shot and crimping the hull like I normally do will give the same results without cutting the hull up.
bcoverss 9 months ago
amazing...loved that information
mach1mustang1971 9 months ago
Love the Lost Arts vids, keep em coming
OldSchoolPatriot 9 months ago
wow
bonesforvp 9 months ago
i can't wait for the next vid
pinhead1304 9 months ago
people are such babies crying about someone is going to get hurt. when you modify any ammo there is a risk but shit happens. good video don't let the safety sally people stop yall.
bhbuckwheat 9 months ago
@bhbuckwheat If you are a safety sally you shouldn't be using firearms because they are dangerous and can kill people=D
vampire847 9 months ago
@vampire847 good point
bhbuckwheat 9 months ago
@vampire847 Guns don't kill people. People Kill People. . .
comedyguy911 9 months ago
@vampire847 They aren't dangerous and they can't kill people. Those using them can use them dangerously and kill people with them.
AdmiralGST 9 months ago
@AdmiralGST I was being sarcastic sorry>.>
vampire847 9 months ago
nice stuff you have going on here.