How to install swap a 350 Chevy Chevrolet SBC V8 Vortec 700R4 into a 1987 Toyota Supra MKIII

[pimbuk]

Do you have the wiring diagram u used for this? Was it a carbed 350?

[MultiReviewking]

like the camera detail work

[kirbyyasha]

Can always depend on quality Chevrolet power to make a Toyota go fast :P

[BboyBlackout]

Hey. Love the build. What mounts did you use?

[Vacationtime247]

@BboyBlackout Check out my other video's. I have a video devoted to how the mounts were installed. It was pretty easy to fab up. It's easy to work under the hood now. The 7M was a PITA!

VT247

[Vacationtime247]

@BboyBlackout Check out my other video's. I have a video devoted to how the mounts were installed. It was pretty easy to fab up. It's easy to work under the hood now. The 7M was a PITA!

VT247

[The1997ChevyMan]

who sings the first part of that song at 0:13?

[Vacationtime247]

@The1997ChevyMan Particle Man by They Might Be Giants

VT247

[The1997ChevyMan]

@Vacationtime247 thanks

[SR204G637MGTE]

im not gonna hate fuck you completely i just wanna know why when 7m are cheap and can hold over 700 hp on stock internals. tell me its just for drag and ill be ok ...i mean i get it sbc is cheap and easy to find parts and build but 7m is crazy strong and relatively easy to mod

[Dmac11a666]

@SR204G637MGTE 700hp on the stock internals? LOL Yeah, for a week....

[blawrence010]

haha this shit looks dangerous but fun

[aknowneemus]

that is one hell of a good idea!

I especially like the overdrive tranny. and a vortec small block? sweeeet!

[cs35043cs35043]

looks like it was meant for it, good job man. got a chance to take it for a drive hows it handle?

[cs35043cs35043]

looks like it was meant for it, good job man. got a chance to take it for a drive hows it handle?

[Duncan2037]

Good video. A pushrod V8 looks at home in this chassis.

[CHEVYCAMARO4GEN]

Real Nice Work, Would Love Seen it Run. Best Security System As i can See.

[mouatech]

original motor was a inline 6 not 4. nice build tho.

[skaterboy22ify]

i made a youtube account just to comment this.....sk8forlife90....ur a dumbass supras origionally had a 6 cylinder

[sstig13]

FYI the supra had an inline 6, not a 4 cylinder. But if your not familiar with imports its easy to make that mistake. A v8 is definitly a step up for power. No replacement for cubic displacement.

[rlopez355]

sorry guys but any project you want too do you need to cleaned first, you need help about how drees cars, I can't show some like that right here, sorry but is the truth, is better take time to finish not matter how long

[okcitisoldier]

awesome,i have an 89 supra turbo that i'm going to put a 327 bored .30 over into.taking notes too cuz i have no idea what the hell i'm doing but i hope it turns into something awesome too

[TWBouska]

damn dude this is the set up im putting into my el camino....i cant even imagine how much ass it would make this supra haul...still will get great MPGS with the overdrive too...props man this is such a cool build.

[bobbyesterly]

hahaha nice car and glock

[chevettesrme]

great work.

[dbzgt545]

pimp i wanna do it to a rx-7

[elcaminochevy]

wow nice build man............

was it a lot of work?????? ......

im planing on doing something similar a 383 with 700r into a rx7 but I like how your supra came out kudos !!!!!!!!!

[Vacationtime247]

It wasn't as much work as I figured it would be. Just figuring out how to mount the engine was the biggest obstacle. But I figured out how to mount it and am satisfied with the results. This is another project on hold. I'll pick up on it again here soon. I have an '83 RX7 that I was origanally going to swap this engine with, but chose the Supra instead. The RX7 still runs with the rotary. The RX7 is lighter, but I like the body of the Supra more. Plus it has back seats.

VT247

[Rote70SS]

Excellent job man! I've got a 240Z that I'll be swapping a LS6/T56 into as soon as more funds are available. Gonna stick with fuel injection on mine, use a Megasquirt in place of the factory ECU. Gonna try to keep it quiet, hopefully make a bit of a sleeper out of it. Can't wait to see more progress!

[sk8forlife90]

does that car hall compared to a built 4 cylinder that was originally in it?

[Vacationtime247]

@sk8forlife90 Car is stupid fast. Loud as hell and can kick it sideways leaving tracks all the way down the road.

[SRZsmack]

@sk8forlife90 these had a 3.0l 6 cyl in them. they werent bad engines the 7m series has a good soul just not enough torque stock, lol this definatley helps out :D.

[BettyBluntz]

@sk8forlife90 it comes with a 6 cylinder

[koldfire08]

@sk8forlife90 Wow your ignorant, just leave along with everyone else that thinks a Supra is a 4 cyl. car.

[hellsdeadjuggalo]

@sk8forlife90 it came with an inline 6 that actually has alot of torque if you got the turbo model still nothing like a nice sbc though

[roguegrizzly1]

you can install a SBC in just about anything on the road

[halopersin]

lol this is awesome if i was forced to have a tuner this would be a must

[domesticbuilt]

lol love the security optional system !!

[Chauvinisticzero]

you should spray the rustoleum on with a hlvp

[ajv6969]

dude you did a shitty job,

you got wires hanging off it and hoeses

hanging off, im going to put up a vid of my chevy at the end of the summer to show you how its supposed to be done

[Vacationtime247]

This video was made before it was done. I'm making videos as the build progresses. I'm still not done with it. I'll work on it for a while, take a break then start back in on it again.

VT247

[ajv6969]

how long is it taking?

i put my vortech in in three days

[Vacationtime247]

As long as it takes to get it done and running well. Obviously they didn't put 350/700R4 Chevy's in Toyota's so it's taking me a bit longer to finish. I still need to put a decent paint job on the car, get a windshield (it's busted) and a 3.73 rear diffential. The 4.33 that it came with are way to low. I'm waiting on Advanced Auto Parts to get my passenger caliper in along with rear pads for the discs.

VT247

[ajv6969]

oh so you just got little things to do,

the biggest thing is the paint,

souldnt take but 5 days to do,

week tops

[BLACKSHEEPc10]

yeah man very nice job don't listen to that idiot , the 350 can make 500+ hp naturally aspirated with the right heads/cam combo, make sure to slap a billet serrvo on that tranny , superior makes one for about 60 bucks and will help alot , i personally have a 200-4r in my c10 truck bullet proffed and im very happy with it

[ajv6969]

you wouldnt get that much hp

[sk8forlife90]

with lots of money and the right block you can make 1000hp naturally aspirated with a 350

[sbsupra86]

Nice i have a 86.5 geting ready for a sbc motor install, nice stroker backed with a 4spd hopefully if not the turbo350 built up

[Vacationtime247]

You should really go with an aftermarket 5 speed, 700R4 or a 200R4. Remember that the rear axle ratio is probably a 4.33 rear gear. Great for take off, but you'll wind out at around 100mph. The overdrive is albeit necessary if you plan on driving it on the street. That or swap out the rear gear assembly (3rd member) to a 3.73 LSD (limited slip differential) from a later model Supra.

VT247

[gsx2vr4]

wow....wtf? that seems to be every rednecks answer when they cant get enough horsepower out of the toyota motor it came with ...MULLET MOTOR sbc ..... 7mgte 1jzgte way more potential and you dont have to fabricate all that jenkiness......lets see some horsepower numbers or 1/4 mile times that will into perspective how pointless this really was......and the gun just points out the redneck thing even more......WEAK SAUCE WEAK FKN SAUCE

[Vacationtime247]

I can make more horsepower for less money this way. 1/4 mile times will be in the mid 12's, even faster with a 125hp shot of Nitrous. To build a 7MGTE or a 1JZGTE would of cost thousands more and be a pain in the arse to work on too.

VT247

[carfanatic89]

i like it. nice job, a 350 will make reliable HP all day. Im wanting to do a 7mgte swap on my 87 supra, Target HP 700.

[viperkillertt]

very nice! :)