2:30 Happy to help with the theory there. The reason is because the LED is not producing current. Rather, the presence of light of the same wavelength range as the LED produces causes the resistivity to change, essentially deadening the diode effect that normally prevents current from flowing that direction.
A white LED should probably not be used for this purpose as a white LED is actually (internally) a blue LED that shines on a a phosphorescent material that emits multi-spectral light.
A single color LED with a clear case is generally preferred for this application, and LEDs are most sensitive to the color they emit when supplied with power.
Hi wondered if this could be used on a Transistor curcuit to Amplify through several Transistors to boost voltage.. Just a Thought. Good though. Thank you.
The amplifier would need to be powered, and at that point it'd be easier to use that same power supply for your circuit. :)
I also doubt that an array of LEDs would be able to provide enough power for anything. Keep in mind that the fact that you get voltage across the terminals doesn't necessarily mean that you have enough current to run something else.
the exactly opposite of photovoltaic solarmodules. an led is a small silicium cube with 2 charged sides. negative electrones and positive "holes". If you put an current on it, the negatives fusing with the holes and escape as an photon (light) Like a solarmodule using a silicium plate. if photons hit the silicium, they split into negatives and positives, now you simply connect both sides and you have a circuit. I think if you connect a solarmodule to a poweline they ll be the brightest LED ever.
Comment removed
MrLinuxkid 4 months ago
awesome
nymphetamine001 7 months ago
what is the direction of the current flow? The conventional way or the opposite?
KennyCieux 9 months ago
THIS IS FAKE !!!
DonOfIstSarajevo 9 months ago
very good job.Come and join us.
plz subscribe ahproduction1214
AHProduction1214 9 months ago
2:30 Happy to help with the theory there. The reason is because the LED is not producing current. Rather, the presence of light of the same wavelength range as the LED produces causes the resistivity to change, essentially deadening the diode effect that normally prevents current from flowing that direction.
fennecfanatic 1 year ago
A white LED should probably not be used for this purpose as a white LED is actually (internally) a blue LED that shines on a a phosphorescent material that emits multi-spectral light.
A single color LED with a clear case is generally preferred for this application, and LEDs are most sensitive to the color they emit when supplied with power.
gnomadrocketry 1 year ago
good video and exploration
SurfOrDie1 1 year ago
thanks to photons!
sxdemon 1 year ago
Could you not use a very large aray of LED's to collect energy from the sun? and charge equipment?
HMInnovations 1 year ago
@HMInnovations In theory yes, but LEDs are too expensive, and generate less voltage than a solar cell.
Dark0Lord7 8 months ago
Hi wondered if this could be used on a Transistor curcuit to Amplify through several Transistors to boost voltage.. Just a Thought. Good though. Thank you.
subsonicnat 1 year ago
Comment removed
subsonicnat 1 year ago
The amplifier would need to be powered, and at that point it'd be easier to use that same power supply for your circuit. :)
I also doubt that an array of LEDs would be able to provide enough power for anything. Keep in mind that the fact that you get voltage across the terminals doesn't necessarily mean that you have enough current to run something else.
jollino 1 year ago
test the amps coming out of it when its short circuited. i believe it wil be a number of nanovolts
rroge5 2 years ago
I use this LED sun tracker to run my
solar panel tracker:
redrok com/electron.htm
definitionofis 2 years ago 2
ar clever but are you shure that its a normal led?
JHsadler 2 years ago
Absolutely positive. It works with any led, albeit different leds will give different values.
jollino 2 years ago
@jollino
fuck.....im trying this out right now lol
firedude201234 1 year ago 4
the exactly opposite of photovoltaic solarmodules. an led is a small silicium cube with 2 charged sides. negative electrones and positive "holes". If you put an current on it, the negatives fusing with the holes and escape as an photon (light) Like a solarmodule using a silicium plate. if photons hit the silicium, they split into negatives and positives, now you simply connect both sides and you have a circuit. I think if you connect a solarmodule to a poweline they ll be the brightest LED ever.
ORMEntertainment 8 months ago
Thanks for explaining
hexinteractive 2 years ago