Credit where it's due for posting your videos instead of all the arm chair critics that don't do jack but wear a paint suit dude whether it's solvent or water base keep that sh*t off your skin. If you like what your doing make sure you're doing it for a long time....
Nice Job good video, don't listen to the overly critical comments. I don't think they knew that you were not painting the whole car, you were blending with the original color. They didn't noticed that you cleared the whole section. Again good job.
total unprofessionell: mit der Pistole rumgeeiert,ungleichmäßig.Keine Schutzkleidung.Scheinbar keine richtige Absaugung.Also ich habe das anders gelernt
@pigidly if we were living in the 70's he might lol if you go into any body shop all you'll find is gray you might find some red that's 30 years old (JUST REDUCE IT IT WILL BE FINE HA HA)
I got a quick question. Say I were to bring my truck, 96 Dodge Ram Ext Cab and an 8ft bed, in to get totally repainted. How much would you think it would cost if I brought it in and they had to do all the sanding and painting? It's blue and silver right now and I am thinking about paintin it like a brighter orange, or red, or possibly black.
@PackyTV dammm thats alot of prep work for starters and blacks a bitch when it come to spraying unless u pay for all the bodywork to be done black shows up every little fault withing the bodywork . anyway i reckon your looking at probably anything from a grand onwards and depending whit paint finish you want to of course
For once can you youtubers just watch the video and comment something on that vid low72 guy, you just had a bipolar moment there saying to grow up, when your the one who keeps responding with capiche, like what the fuck who says that ! That 206sole guy is just a bi
@jimmo4life hey man great job, i am just wondering how much does it normally cost to paint a small car (honda civic), because i am planning to get mine painted.. thanks!
In all my 20 plus years of spraying I have never seen the end to end spray technique. You make it look easy. I might try it on a smaller car to start and see how it works. Great air flow in the booth, looks like higher pressure than most use, what PSI to your gun and product type?
that looks awesome. since your in that industry, i was thinking of getting my 99 civic hatch painted, but has 3 of 4 softball size dents i want out and painted black original color. I don't plan to have the car for 10's of years probably around 4-5 years and don't want to spend too much on it, what prices should i be expecting and what things should i watch out for?
okay so today my mom comes in my room while im watching gone in 60 seconds, and it was the part where auto was painting the flames on a car anyways my mom starts yelling at me bc i dont no what i want to do with my future yet. (im 17) and all of sudden i was like.. i actually would love to paint cars, im creative and i love cars but i dont want to be a mechanic but to paint them wouldbe awesome, how would i get into this career?
What was on the cloth that you used at the beginning? Was it a tack cloth, or was it wax and grease remover? Do you have to use both a tack cloth AND a wax and grease remover? If so, then how long before you paint, and in what order? Basically, how to I prep the surface RIGHT before I paint...
@206sole what's with your little internet nerds whose only insults are mentioning parents & incest? Seriously if you think that offends anybody your mistaken
@low72 Its funny how when someone doesn't have a good comeback they make fun of the other persons spelling. Hah, when did we start using proper English on the internet, oh yeah, only people that are insecure about there intelligence do that. And by the way I was inebriated and fingering you sister with two hands when I typed those comments douche bag. Capich.... wait only faggots say that.
@206sole It's just a given, you know, something you should of paid attention to in school. I mean come on it's not that hard to learn and make a good habit of. Sorry, bro...I don't have a sister. What's with you little internet nerds always trying to insult other people with comments about sexual activities involving their family members that they've never seen / met before? What are you, 10 years old? If anything you should do a little growing up as well before your reply, capiche?
can you give me little more info about how you sand ? front driver door have some paint left, did you apply the primer or you just sand it till you see the primer
@johnCfu1 depends on what kind of paint you are using but you could use ax and grease remover gets rid of all the crap and also use a tac cloth right before you spray.
unfortunately, shooting car paint is the most F. U. job there is in the entire world, u have to deal with TOXIC fumes, you have to mask off, thin down paint, strain paint. Clean the stupid airgun, polish, etc. What pisses me off the most is the smell of pain, yes, THE SMELL, it's shit man, pure shit!
@cosuinofdeath Besides the respirator you shouldn't expose any bare skin, they say the paint can come inside trhough the skin and detroy your lungs or liver later in life, that's why am saying this job is dangerous, bye
Just take an advise from "jimmo4life" and i have to say its very true of what hes saying. Things that look easy arent always easy. Like the paint jobin this vid and how to prepair it "BEFORE" you paint it. All the mess ups come to life when you paint it, like if the sand paper wasnt fine enough it would look like you painted over a mass of scraches. or you didnt puddy it right(seeing waves in the puddy job and so on).Dont try this in an open area either, or when the paint drys it just may happe
You have to tell what you are applying and so on for people who have no idea how to do this. Do you think I could use the Electric hplv paint sprayer to do this? Why not?
look i have a question i bought a front bumper and its black... sound i sand the top layer only and repaint it or should i sand the top later and then put primer on it and re paint it red?
is there any particular reason why you prefer to clear the entire side of the car at once? I notice a lot of painters usually clear one panel at a time and move onto the next. I'm not intending the way you did it was wrong I was just wondering if you find any benifits in doing it the way you do.
@Spoolin95DSM both work just fine some painters can't pain panel by panel cause they get runs and some find it hard to get a good finish by doing what this guy does there is just 6 rules in puting clear on to get a good finish.. gun distance, movement speed,air presure,fan and fluid control and finally overlaping each coat of clear you put on i do it 50/50 90 digrees angle walking can cause uneven coating cause as you walk its hard to maintain the thing i mention above some can do it no problem
hogman2461 The 1th thing u whant 2 do is find out what the paint brand recomends. 2nd u whant 2 consider the size of the metalflake, i use a 1.3 sata with 15 to 20 psi on all my dupont metaliks and 1.3 iwata with the orange cap on all my solids i find that it breaks up the paint that much better than anything that ihave use in the past. for clears I use a 1.4 sata b2000 with 35 to 40psi 2 wet coats with a10 min between coat makes a great finish. hope this helps
Nice job. could you please make a video of color tinting techniques which include white, pearl whites, beige, gold, silver, red, green, and all those paint that hard to tint. thanks
Bad Vid---Wrong type of gun ( DeVillebissJGA is better)Fan too wide--You should release pressure at the end of each pass. Some passes too close , some passes too far away.Pressure looks a little high???
Appreciate the input hunter. The Iwata LPH400 is designed for base and the W400 is a compliant designed for clear. It is a pretty good gun, lately I've leaned towards the Sata RP for clear. Yet to try the JGA. The guns are all set at Iwata's recommend pressure and fan settings, around 18 for base, 26 for clear. I avoid releasing the trigger on passes because usually the gun will surge a bit of air and possibly create more dust in the job.... just a personal preference.
If i buy a sprayer and paint my car after i do all the proper prep work and everything for my first time, will the paint job turn out good? is it hard to do?
as a first timer, follow all the proper steps for pre-work and acual paint and painting. avoid short cuts and realy take your time and u'll end up with a paint job u'll be proud of.
you don't let off the trigger at all, all the other videos I have seen and stuff I read say to let off the trigger on each side just past the car and then start back on on the second pass
Keep any products that contain silicone (armor all, waxes..etc) away from your spray area and avoid using them in a car your planing to spray. Use a quality wax and silicone remover, maybe increase your spray pressure.
1ts check ur airline for water. an easy fix is to purge ur compresor and buy a disposable air dryer they around 10 us dollar. make sure u clean ur panels before u do any spraing. something to consider is the tack rag, i use the cristal finish tack rags they are the best. victorb60@hotmail.com
@williamz will simple use wax and grease remover also known as presol and dont touch the surface you are painting with your hands make sure the surface your painting is dry if your your wet rubbing the job you're painting and put some heat in both hahaha if it happen again then it may not be fisheyes could be pinholes sometimes you dont see them when your puting your basecoat on and you will see them when clearing the job it happens when you put on primer coat after coat without leting them dry
good job one think i have to ask you. Why you couldn`t jus put the clear on one element and move to the other. Shooting clear from one side to the other looks like it`s one of your first times you do that.
i realized you didnt your sealer, and i was taught in school to use sealer before you applied paint to prevent primer from bleeding through and sucking the paint whats your opinion on that? jimmo
On some jobs I will. If it has a primer surfacer over the filler then bleeding wont be an issue, sealers basically the same thing just wet-on-wet ...it can help with holdout against sinking and improve adhesion in some situations.
I have heard that for the base coat, you should have approximatly a 50 % overlap. Is it the same with clear? He seems to be going the same area three times. Wouldn't that cause major runs ?
my car is white but i'm gonna change it to blue, do i have to primer the whole car or just sand an paint on top of old paint? i never paint a car before but i wanna try it in my own car, can you give me some tip of how to paint a whole car please, cheers
@rockmyboat676 you can prep the car with a very fine abrhasive an then you would not need to prime, but this only really applies to a mint condition surface, white is a good base colour for a blue. Personally i would use a transparent sealer before my blue, but if you have areas that you need to sand down to the metal you can always spot prime an then flat that. Would use less consumables that way, hope this helps
@hector1130 its tack cloth and he is removing any paint particles that dried before it hit the surface of the car. its another technique to ensure better adhesion for the next coat of paint
what did u just put there to clean all the surface???? thinner Mineral spirit or lacquer?
cuz im painting my s10 blazer im a noob but im learning all i can before doing it so i kidna need al information each process u do like sand clean primer paint clear u know those things... each process by details : )
i was planning on painting my bimmer to a darker blue but how much do i have to sand to get started? all the way to the primer or to the metal to add new primer?
If its in good condition now just sand enough to give you adhesion. That means not very much at all. Try and remove the orange peel from the clear, that should be good enough, Follow that with a grey scotch pad and a sanding paste...you could even skip the sanding and just use the scotchbrite and paste....i'd wouldn't do that personally but it is an approved way.
yeah its not that bad, few small dents here and there but the clear started to peel of with the rain...??? looks ugly and now i want a different color lol. thank you for the info bud.
keine ahung vom lackieren lass es besser da bekommt man augenkrebs
MZ91ful 2 days ago
Awesome Job Bro! Wish you can paint my car. ;)
2011TOMCAT 4 days ago
Credit where it's due for posting your videos instead of all the arm chair critics that don't do jack but wear a paint suit dude whether it's solvent or water base keep that sh*t off your skin. If you like what your doing make sure you're doing it for a long time....
rgvdarren 1 week ago
Nice Job good video, don't listen to the overly critical comments. I don't think they knew that you were not painting the whole car, you were blending with the original color. They didn't noticed that you cleared the whole section. Again good job.
alxbosch7 1 week ago
oh i wanted the how to paint a car pink video,i will keep searching :)
clara17uk 1 week ago
total unprofessionell: mit der Pistole rumgeeiert,ungleichmäßig.Keine Schutzkleidung.Scheinbar keine richtige Absaugung.Also ich habe das anders gelernt
Daweisstebescheid 1 week ago
this guy never paint before,sure. totaly amateur
Daweisstebescheid 2 weeks ago
as ull notice while hes painting bottom to top all his over spray get stuck on the lower portion of the car.. NOOB! paint top to bottom
Strang08070 2 weeks ago
PAINT COSTS MORE THAN THE CAR :)
pravinovosadjanin 3 weeks ago
Tune gun down some . To much over spray
memberson 3 weeks ago
and that's how it's done very good some of these guys that post videos on you tube are a joke this guys a pro i give him a 10
jimba2000 1 month ago
this is a good job man
85carlosn 1 month ago
why didn't you take a red oxide primer instead of grey?
pigidly 1 month ago
@pigidly if we were living in the 70's he might lol if you go into any body shop all you'll find is gray you might find some red that's 30 years old (JUST REDUCE IT IT WILL BE FINE HA HA)
jimba2000 1 month ago
Comment removed
madskaterz 1 month ago
I got a quick question. Say I were to bring my truck, 96 Dodge Ram Ext Cab and an 8ft bed, in to get totally repainted. How much would you think it would cost if I brought it in and they had to do all the sanding and painting? It's blue and silver right now and I am thinking about paintin it like a brighter orange, or red, or possibly black.
PackyTV 1 month ago
@PackyTV dammm thats alot of prep work for starters and blacks a bitch when it come to spraying unless u pay for all the bodywork to be done black shows up every little fault withing the bodywork . anyway i reckon your looking at probably anything from a grand onwards and depending whit paint finish you want to of course
Curizmaaa 1 month ago
@PackyTV to do it right it would cost more than the truck is worth
jimba2000 1 month ago
@PackyTV I would say maybe 8 to 12k
intheshitter 1 week ago
Forgot the tch. Nice vid by the way
Guam671xboy 1 month ago
For once can you youtubers just watch the video and comment something on that vid low72 guy, you just had a bipolar moment there saying to grow up, when your the one who keeps responding with capiche, like what the fuck who says that ! That 206sole guy is just a bi
Guam671xboy 1 month ago
curious on how you manage to go over the same line 2 times so slowly before moving down panel and getting no runs?? how have you got the gun set?,.
mrrodneyracing 2 months ago
what is the name of spray gun?
zeidooon 2 months ago
@jimmo4life hey man great job, i am just wondering how much does it normally cost to paint a small car (honda civic), because i am planning to get mine painted.. thanks!
crimsoninred 2 months ago
is a professional, very good technique.
FenixFusor 3 months ago
c est un artist.......bon corage
algeriano118 3 months ago
In all my 20 plus years of spraying I have never seen the end to end spray technique. You make it look easy. I might try it on a smaller car to start and see how it works. Great air flow in the booth, looks like higher pressure than most use, what PSI to your gun and product type?
jaydee040 3 months ago
he likes these junk cars though
asksteevies 3 months ago
Oh WOW..Here is that guy again!! of Course he can handle a spray gun.Lovely paintjob !!
pellebjurman 4 months ago
can't believe how shiny it is
archonky 4 months ago
that guy is drunk i think
mariotdi555 4 months ago
Nice job on that car. I totally wish I had that skill.
latitude500 5 months ago
Nice Work!!! You just wet that Buick!
but199018 5 months ago
I love this color,it look like a chocolate.
yaris4fun 5 months ago
nice job how much did that set the customer back?
20k7ALDAY 5 months ago
?what kind of spray gun you use
zeidooon 5 months ago
nice work dude
thethecqp 5 months ago
ne6o mai se u4i6 sega gledaite go vnimatelno predi da pi6ete ha ha ha
princesatamelisa1 5 months ago
good job
BrunoAchiles 6 months ago
really usefull!!!!
blajek 6 months ago
that looks awesome. since your in that industry, i was thinking of getting my 99 civic hatch painted, but has 3 of 4 softball size dents i want out and painted black original color. I don't plan to have the car for 10's of years probably around 4-5 years and don't want to spend too much on it, what prices should i be expecting and what things should i watch out for?
kpbrian79 6 months ago
no eye goggle! awesome!
kpbrian79 6 months ago
Awesome!!!
Naturallyanthony 6 months ago
This has been flagged as spam show
how many time per coats?
IsmaelAdame 6 months ago
Very good job man, I must say. Impressive!
crissrussell1793 6 months ago
okay so today my mom comes in my room while im watching gone in 60 seconds, and it was the part where auto was painting the flames on a car anyways my mom starts yelling at me bc i dont no what i want to do with my future yet. (im 17) and all of sudden i was like.. i actually would love to paint cars, im creative and i love cars but i dont want to be a mechanic but to paint them wouldbe awesome, how would i get into this career?
xoLayla21 6 months ago
Nice what kind of ventilation would you recomend
tolerance775 6 months ago
u use water based paint ?
metasbt 7 months ago
i see drips on fender
jose28Rivera1 7 months ago
U GAVE THE CAR ONE HELL OF A PAINT JOB!! THUMBS UP TO U!!
Soberrynice1 7 months ago
i can se your a pro car body and paint job must be your daily job im sure of
mecanicman66 8 months ago
What was on the cloth that you used at the beginning? Was it a tack cloth, or was it wax and grease remover? Do you have to use both a tack cloth AND a wax and grease remover? If so, then how long before you paint, and in what order? Basically, how to I prep the surface RIGHT before I paint...
Chrisgottschalk2 8 months ago
looks nice man ;) good job
IriSsHBoy 8 months ago
What are you using at 4:05?
daverrd 8 months ago
@daverrd its called clear coat you fucking retard
206sole 8 months ago
@206sole hey bro chill, the man was just interested and curious,why not just help him ass
chillinkillin0 8 months ago
@chillinkillin0 how bout minding ur own business. and i was helping the guy, i told him that is was clear coat u idiot
206sole 6 months ago
@206sole still, no reason to be a dick
chillinkillin0 6 months ago
@chillinkillin0 go hug a tree you fag, y are u so sensitive, did you have no dad.
206sole 5 months ago
@206sole im not. your just a little bitch being a douche on youtube.
chillinkillin0 5 months ago
@chillinkillin0 haha, no dad no dad no dad no dad, go kill urself so no one has to read ur gay comments bitch
206sole 5 months ago
@206sole what's with your little internet nerds whose only insults are mentioning parents & incest? Seriously if you think that offends anybody your mistaken
low72 4 months ago
@low72 obviously you were so butthurt it took you a month to respond
206sole 4 months ago
@206sole I'm not even the one you were originally responding to? LOL retard. Learn to read before you reply, capiche?
low72 4 months ago
@low72 your still a faggot tho, capiche? FUCK YOU
206sole 4 months ago
@206sole *you're & *though. You need to learn some spelling as well before you reply, capiche?
low72 4 months ago
@low72 Its funny how when someone doesn't have a good comeback they make fun of the other persons spelling. Hah, when did we start using proper English on the internet, oh yeah, only people that are insecure about there intelligence do that. And by the way I was inebriated and fingering you sister with two hands when I typed those comments douche bag. Capich.... wait only faggots say that.
206sole 3 months ago
@206sole It's just a given, you know, something you should of paid attention to in school. I mean come on it's not that hard to learn and make a good habit of. Sorry, bro...I don't have a sister. What's with you little internet nerds always trying to insult other people with comments about sexual activities involving their family members that they've never seen / met before? What are you, 10 years old? If anything you should do a little growing up as well before your reply, capiche?
low72 3 months ago
Very Nice Work Jim
Could you possibly give us some advice on paint gun tips. I cannot decide which tip paint gun to get 1.3mm, 1.4mm or 1.5mm.
ivanbgct 8 months ago
@ivanbgct 1.4 mm is the most commun tip they use
BAROUETTE69 3 months ago
how do you prevent the paint and clear coat from dripping? and how many coats of each do you apply?
loveyouboo1923 9 months ago
can i use base coat and clear coat with the same gun and canister?
187MIAMIBOY 9 months ago
Nice job. One thing I would advise is to get the garden hose and spray down the floor with water before painting to keep dust down.
gol8kers88 9 months ago
where do you get your clear and paint from?
TheVirtualsniper 9 months ago
i know it's only on camera, but i'm quite impressed with your clear coating skill
clear coating is a whole other can of worms in the painting world
usdrealm1 9 months ago
what kind of clear are you using? i use ppg 2021 or 3000 on smaller jobs. i also use a iwata lph 400 with a 1.3 tip. i love that gun
cappy781 9 months ago
@cappy781 me too
maxomega2002 9 months ago
can you give me little more info about how you sand ? front driver door have some paint left, did you apply the primer or you just sand it till you see the primer
kaymaggie520 9 months ago
why don't you wear better protection for yourself, like a fresh air respirator the least?
Flamingo001 9 months ago
amazing work, awesome job.
single231980 9 months ago
Awesome! this is a true art form.
ashabeiberman 10 months ago
do u sand down to the metal?
adiosk8rdude2 10 months ago
Muy explícito, muy bueno el vídeo...
TECNOLOGODENTAL1 10 months ago
thats pretty damn good :D i wish i had a car haha
neonzion7 10 months ago
how much is red paint and the gun i that wa you need aint it chaper doin it yourself bud ?
welshypool 10 months ago
looks great
PuDigY 10 months ago
looks great
PuDigY 10 months ago
where is u airfed mask and u paper overalls????
MegaChris1978 10 months ago
what did you use to clean it berore paint it ????
johnCfu1 10 months ago
@johnCfu1 depends on what kind of paint you are using but you could use ax and grease remover gets rid of all the crap and also use a tac cloth right before you spray.
cosuinofdeath 10 months ago
what did you rub on the car between coats/
chevyhotsean 11 months ago
@chevyhotsean tack cloth most likely, used to remove any dust/dirt particles and things like that.
Nickyd0403 11 months ago
is the gun finish line
john90101 11 months ago
unfortunately, shooting car paint is the most F. U. job there is in the entire world, u have to deal with TOXIC fumes, you have to mask off, thin down paint, strain paint. Clean the stupid airgun, polish, etc. What pisses me off the most is the smell of pain, yes, THE SMELL, it's shit man, pure shit!
TheSpanishboi 11 months ago
@TheSpanishboi hahaha ure telling me i need ot start wearing my respirator
cosuinofdeath 10 months ago
@cosuinofdeath Besides the respirator you shouldn't expose any bare skin, they say the paint can come inside trhough the skin and detroy your lungs or liver later in life, that's why am saying this job is dangerous, bye
TheSpanishboi 10 months ago
This has been flagged as spam show
BOMM at the end! thumbs up 8:41
Commander440 11 months ago
This has been flagged as spam show
BOMM at the end! thumbs up
Commander440 11 months ago
do u bake after this?
golddang 11 months ago
I just noticed he's using those funky cups from 3M
lexichronicle2 11 months ago
Just take an advise from "jimmo4life" and i have to say its very true of what hes saying. Things that look easy arent always easy. Like the paint jobin this vid and how to prepair it "BEFORE" you paint it. All the mess ups come to life when you paint it, like if the sand paper wasnt fine enough it would look like you painted over a mass of scraches. or you didnt puddy it right(seeing waves in the puddy job and so on).Dont try this in an open area either, or when the paint drys it just may happe
20rich02 11 months ago
4:15 clear coat ?
TooonBeeHD 1 year ago
nice job!
MrMmorre000 1 year ago
hey bro how many times did you spray the base coat on..? or how many layers,
MrZiggy1979 1 year ago
hey bro how many times did you spray the base coat on..? or how many layers
MrZiggy1979 1 year ago
the spray gan is an iwata?
Erbasicca69 1 year ago
@Erbasicca69
Yep
jimmo4life 1 year ago 3
You have to tell what you are applying and so on for people who have no idea how to do this. Do you think I could use the Electric hplv paint sprayer to do this? Why not?
ArunaMendis 8 months ago
Nice job, Questions...
What were the air compressor specs & the Gun specs
What did you use for the clearcoat
homes24 1 year ago
look i have a question i bought a front bumper and its black... sound i sand the top layer only and repaint it or should i sand the top later and then put primer on it and re paint it red?
krazematik 1 year ago
thanks for putting skip ad
leeanddean 1 year ago
is there any particular reason why you prefer to clear the entire side of the car at once? I notice a lot of painters usually clear one panel at a time and move onto the next. I'm not intending the way you did it was wrong I was just wondering if you find any benifits in doing it the way you do.
Spoolin95DSM 1 year ago
@Spoolin95DSM both work just fine some painters can't pain panel by panel cause they get runs and some find it hard to get a good finish by doing what this guy does there is just 6 rules in puting clear on to get a good finish.. gun distance, movement speed,air presure,fan and fluid control and finally overlaping each coat of clear you put on i do it 50/50 90 digrees angle walking can cause uneven coating cause as you walk its hard to maintain the thing i mention above some can do it no problem
elitepinoyz2009 1 year ago
oooooooooo shiny
rolljimmmy24 1 year ago
nice job did u have to buff this job
85carlosn 1 year ago
@85carlosn
From what I remember I took out a few dirt nibs here and there.
jimmo4life 1 year ago
@85carlosn of cause u ediot every job you do u need to buff dem lol
DwarfGuy1 9 months ago
@DwarfGuy1 no not every job u have to buff. only if u arnt gud enough to get the job done straight off the gun
CODZILLA863 6 months ago
ur with open so wide
DwarfGuy1 9 months ago
do you have to use a spray gun or can you use spray paint can?
deante1 1 year ago
@deante1
Have to use a gun
jimmo4life 1 year ago 8
@deante1 "can you use spray paint can?"
My mate used an emulsion roller to refinish his; I'm not even kidding.
The result was predictably disgusting.
lexichronicle2 11 months ago
@deante1 you can use a can and it will look ok but if you want it to look good then use a gun
TeamDANGERAutosport 10 months ago
Why walk the panels with the clear??
scooterinvegas 1 year ago
Good Work!! Car looks real good
JOKERBABYG 1 year ago
Love the out come of the paint job. Im planning on painting my bucik regal soon. any tips on what size tips to use and amount of psi to use? thanks
mrwright1314 1 year ago
hogman2461 The 1th thing u whant 2 do is find out what the paint brand recomends. 2nd u whant 2 consider the size of the metalflake, i use a 1.3 sata with 15 to 20 psi on all my dupont metaliks and 1.3 iwata with the orange cap on all my solids i find that it breaks up the paint that much better than anything that ihave use in the past. for clears I use a 1.4 sata b2000 with 35 to 40psi 2 wet coats with a10 min between coat makes a great finish. hope this helps
hogman2461 1 year ago
Nicely done!
kenv13 1 year ago
Is all paint that dule until you put the clear on? I was a little skeptical at first when I saw thatt the base coat was so dule.
novajeff 1 year ago
Nice job. could you please make a video of color tinting techniques which include white, pearl whites, beige, gold, silver, red, green, and all those paint that hard to tint. thanks
EvolutionIXRR 1 year ago
Bad Vid---Wrong type of gun ( DeVillebissJGA is better)Fan too wide--You should release pressure at the end of each pass. Some passes too close , some passes too far away.Pressure looks a little high???
hunter0f2 1 year ago
@hunter0f2
Appreciate the input hunter. The Iwata LPH400 is designed for base and the W400 is a compliant designed for clear. It is a pretty good gun, lately I've leaned towards the Sata RP for clear. Yet to try the JGA. The guns are all set at Iwata's recommend pressure and fan settings, around 18 for base, 26 for clear. I avoid releasing the trigger on passes because usually the gun will surge a bit of air and possibly create more dust in the job.... just a personal preference.
jimmo4life 1 year ago
If i buy a sprayer and paint my car after i do all the proper prep work and everything for my first time, will the paint job turn out good? is it hard to do?
forbzy61 1 year ago
@forbzy61
It takes practice, if you put some time into learning I'm sure you could figure it out.
jimmo4life 1 year ago
@forbzy61
as a first timer, follow all the proper steps for pre-work and acual paint and painting. avoid short cuts and realy take your time and u'll end up with a paint job u'll be proud of.
floresjr831 1 year ago
you don't let off the trigger at all, all the other videos I have seen and stuff I read say to let off the trigger on each side just past the car and then start back on on the second pass
muszyngr 1 year ago
i keep getting fisheyes in my clear coat any advice
williamztodd 1 year ago
Keep any products that contain silicone (armor all, waxes..etc) away from your spray area and avoid using them in a car your planing to spray. Use a quality wax and silicone remover, maybe increase your spray pressure.
jimmo4life 1 year ago
1ts check ur airline for water. an easy fix is to purge ur compresor and buy a disposable air dryer they around 10 us dollar. make sure u clean ur panels before u do any spraing. something to consider is the tack rag, i use the cristal finish tack rags they are the best. victorb60@hotmail.com
hogman2461 1 year ago
@williamz will simple use wax and grease remover also known as presol and dont touch the surface you are painting with your hands make sure the surface your painting is dry if your your wet rubbing the job you're painting and put some heat in both hahaha if it happen again then it may not be fisheyes could be pinholes sometimes you dont see them when your puting your basecoat on and you will see them when clearing the job it happens when you put on primer coat after coat without leting them dry
elitepinoyz2009 1 year ago
is that a tac rag??
wsmikey 1 year ago
nice tecnique, learned a lot
RAT1969 1 year ago
good job one think i have to ask you. Why you couldn`t jus put the clear on one element and move to the other. Shooting clear from one side to the other looks like it`s one of your first times you do that.
kylu81 1 year ago
@kylu81
Im not really sure, another painter suggested I try spraying like that a while back and I've been hooked ever since!
jimmo4life 1 year ago
it looks good man. great work. I don't trust myself enough to do my own car ever. I'll leave it to the pros.
sparaz 1 year ago
why does he use a different bottle for paint?
williamaguiar14 1 year ago
@williamaguiar14 one is paint the other is clear coat. and the last one is holy water
l3oss2u 1 year ago
che spreco di trasparente ha dato un etto di vernice sulla carta cerata,poi ha tolto profili e maniglie e non ha tolto i raschiavetro
siscoboy9 1 year ago
i realized you didnt your sealer, and i was taught in school to use sealer before you applied paint to prevent primer from bleeding through and sucking the paint whats your opinion on that? jimmo
azteklife81 1 year ago
@azteklife81
On some jobs I will. If it has a primer surfacer over the filler then bleeding wont be an issue, sealers basically the same thing just wet-on-wet ...it can help with holdout against sinking and improve adhesion in some situations.
jimmo4life 1 year ago
I have heard that for the base coat, you should have approximatly a 50 % overlap. Is it the same with clear? He seems to be going the same area three times. Wouldn't that cause major runs ?
PRACERZ 1 year ago
travel speed and gun distance are both inconsistent.
dieselwarriordotcom 1 year ago
my car is white but i'm gonna change it to blue, do i have to primer the whole car or just sand an paint on top of old paint? i never paint a car before but i wanna try it in my own car, can you give me some tip of how to paint a whole car please, cheers
rockmyboat676 1 year ago
@rockmyboat676 you can prep the car with a very fine abrhasive an then you would not need to prime, but this only really applies to a mint condition surface, white is a good base colour for a blue. Personally i would use a transparent sealer before my blue, but if you have areas that you need to sand down to the metal you can always spot prime an then flat that. Would use less consumables that way, hope this helps
jbsandhurst 1 year ago
lots of clear
rob99rst 1 year ago
what is that on your hand and why do you rub it after each coat?? plz answer
hector1130 1 year ago
@hector1130 its tack cloth and he is removing any paint particles that dried before it hit the surface of the car. its another technique to ensure better adhesion for the next coat of paint
BootStrapify 1 year ago
i also forgot to mention the ratio of the paint how do i mixx it u know
what psi do i use like the one u use for this kind of job?
X2N18 1 year ago
what did u just put there to clean all the surface???? thinner Mineral spirit or lacquer?
cuz im painting my s10 blazer im a noob but im learning all i can before doing it so i kidna need al information each process u do like sand clean primer paint clear u know those things... each process by details : )
X2N18 1 year ago
@X2N18
My guess is it's probably rubbing alcohol. What year's your Blazer? I had an '89. It was a good truck- got 230k out of that thing.
2007Escalade 1 year ago
This looks so fun I want to get a job doing this.
policeman1313 1 year ago
@policeman1313 (yes, this and all the pres work, puttying and that sort of stuff, not just airgunning :P )
policeman1313 1 year ago
What grit paper did you sand it with after for runs?
avio07 1 year ago
Would a 1.0 nozzle hvlp be too small for this kind of job? including a primer and clearcoat?
frdgrnn 1 year ago
its amazing how crappy the paint looks on a car without clear coat
SkatingIsMyWayOfLife 1 year ago
hey jimmo can you explain to me the difference between the color air caps......and is iwata a good gun?
jfolks74 1 year ago
HA thats called clear coat my friend...
vashtriger123 1 year ago
whats that white spray, that makes it bring out the color?
youcantseedre 1 year ago
very good ,nice work
maticam19 1 year ago
excellent work!
MrRichierich1990 2 years ago
This is one of the best painting videos ive seen that show me start to finish paint......Good video.....Nice work
troy285 2 years ago
i was planning on painting my bimmer to a darker blue but how much do i have to sand to get started? all the way to the primer or to the metal to add new primer?
bass1134 2 years ago
If its in good condition now just sand enough to give you adhesion. That means not very much at all. Try and remove the orange peel from the clear, that should be good enough, Follow that with a grey scotch pad and a sanding paste...you could even skip the sanding and just use the scotchbrite and paste....i'd wouldn't do that personally but it is an approved way.
jimmo4life 2 years ago
yeah its not that bad, few small dents here and there but the clear started to peel of with the rain...??? looks ugly and now i want a different color lol. thank you for the info bud.
bass1134 2 years ago