Just a test run of double generator 2. (TheDaftMan)

[Rick007191]

Great work....

Are you tired of searching for free energy generator?

Go to Google and search for "Top Magnet Generator Free Energy" ...

Click the First Result (Skip the Advertisements)

[MucusFelidae]

I watched the video to the end but have no clue what he is trying to do.

Motor and generator have been invented long ago and there is nothing new in here.

[MucusFelidae]

Why that noise? A hidden diesel engine in your room?

[MightyZarkon]

Daftman, your work is the coolest. Thanks for your videos I get what you are doing.

[discoide1451]

génerateur discoide 24 V  site Weeb discoide1451

[Landotter1]

Shame the home builder can't readily dynamically balance flywheels or wheels and the sort, at home. That would greatly help your design here, me thinks.... I don't know what yhou are doing, exactly but I wish you well on this project. Press-pins will help the magnets stay in or encapsulate them in epoxxy resin possibly??? Anyway, Best wishes... :-)

[noreplyism]

How many Amps in and out?

[NewRepair]

If you can hear it... It's Kinetic energy. Although impressive, years away from this government willing to spend billions on a scale up.

[Giftedhawx97]

Hey can someone answer my other comment please....

[Giftedhawx97]

Hey i have built the generator and now i am building two bedini motors to spin a rotor just like you have done here. What type of current does the whole system run on because i am going to buy a varible power supply modual to control it? Help would be gladly appreiciated!!! thanks fellas.

[gohangiants]

Aluminium being a non-ferous metal (if I remember correctly) will not attract the mags, and be less likely to pop like the original wooden chassis.

[alexermerson]

wow nice work but there are a lot easier ways to make a voltage multiplier.

Power in is greater than power out even though the voltage is increased.

[ironjudas666]

im just gonna throw out an idea, why not use the torque of the motor that charges two batteries (swap etc) to turn a 120 A car alternator to use the electricity from. e.g. via a belt and a larger flywheel on the motor? just an idea, might be stupid. i hope im gonna be able to try that myself

[jay68521]

dont use wood as the base use metal ang insulators......... idiot

[jay68521]

wala tupa ah.. nu sagay mo ka kumod hing hangag ka man?

[khurramiq]

out standing weldone greeeeeeeeeeeeeeeeat idea



[ranjit3o]

i try to understand how u made it...but not clearly..Basically ur mean that u can generate pawer with same Generator 's pawer to generate the Router? mean dont u need any other pawer to Run it beside Capacitor?..Pls Explain..

[TheGrahamBrechin]

well done you've re-invented the electric motor... try making it run under its own steam

[djburke135]

Yes but how much power do you get out compared to what you have to put in?

[Pirate88179]

Excellent work as usual.

Thanks,

Bill

[AceThee]

imagine if you hooked up a gear ratio system to the free spinning end"s"...or make the shaft extend so you can do so .

Gear ratio to drive additional generators....I am sure it has enough torque.

The possibilities are insane.

Thumbs up if agree =Þ

[cheetawolf]

maybe you should make the coil holders out of aluminum (its non magnetic) for a bit more safety because it wont shatter and will contain the broken magnet until it eventually grinds to a halt.

[orbiter8]

Very interesting indeed, thanks for sharing this. Bit of a shame it blew up on you but I'm sure you'll fix it :)

orb

[itsthetooth]

This has got to be one of the best looking pieces I have seen. The wood workmanship is excellent. Only passed up by one I saw online that must have had a metal machine shop and the thing was silent beyond belief. It’s hard for me to understand the accent sometimes; aside it’s a good video. I would however suggest you getting your magnets closer to the windings as it appears there is a good ½ inch gap and you could improve the performance on that end.

[valdarmort]

you remind me of a modern day wallace your only missing grommit 

[hytlerson]

action starts at 3:16

[robertjeXD]

BORING RUN IUT AND DONT TALK SO MUCHE

[atv374]

Dear Mr. TheDaftman, Without any question you have presented to the whole world your great experiments. However I would like to draw your attention to the essence you missed. Build another generator like the one you already built, but with a lot of strong magnets, and bigger coils, and you will surely get a lot of electricity, more than what is consumed. Nothing OverUnity, you will be simply generating electricity from the magnets free energy. (like wind energy).

[Marcks39]

This is some wonderfully exciting work, nice job Daftman! I don't know much about these kinds of things, so I was wondering if you could answer me this question: "Have you ever considered putting one of those squirrel cage generators on perhaps the Clock Motor/Generator?" I would assume that the power that is generated by the Clock Motor would run itself, while the generator could be taxed by a torch bulb or a battery. I wonder what could possibly be achieved by that configuration.

[dainius11]

gr8 work nice i like it =)

[PyreManiacz]

Thats pretty nice, very loud too D:

[JOCKATEO]

shit my subwoofer at a point on that motor sound knocked off plate i had sitting next to it '@lol

[TheTruthPusher]

Put a belt around those magnets

so they wont fly off and hit someone.

[ashtweth]

Permanent magnet rotor will eliminate the slip come to EVGRAY forum at yahoo groups for details, dont throw this one out

[keykhin]

Oy mate, awesome job! On the generator side you should made a bigger diameter rotor with half inch by half inch by two inches neodymium magnets embedded. The closer you bring the magnets to the coils, the bigger peripherical speed, the more tight magnetical coupling and of course, more voltage and amperage in the generator coils. And try too loop the system. Good luck!

[Backyardninja76]

hey man why are you gluing them? Make a resin mold with them inside...super safe.

[powerupsoon]

hey Dafman you still doing this?

[solorstars]

what do you wrap over the magnets foil?

[theDaftman]

Its vent ducting tape comes in different thickness and I just us it as an extra fixing for the magnets.

[kennysc12]

but wouldnt the law of gravity keep the magnets in place on a circle?

[sotirisdin]

hi my friend i am 25 years old studying engineniring (university) from greece i had a lesson 2 years ago called s.a.e. (control to the field and drum automations in industry) and in a demonstration of a motor with field control i said to my teacher the basics of your work (with i have seen it then) he smiled and he told me to stop dreaming. thanks for your video the proof of my... dreams :-)

p.s. sorry for my english

p.s.2 keep up good work

[volchevike1945]

valla trasto, si fuera eficaz cargaria el condensador al instante

[cyberlord64]

in which university are you in?

[x65535x]

How does the open winding motor work? I'm curious if it produces any decent results compared to a standard motor with steel lamination to contain the magnetic flux. I would imagine it you run into some series inefficiencies with it.

[jamaika17]

great job!

[joelito101]

Has anyone ever though about pulsing a floating magnetic ball inside antoher sphere. No friction and almost limitless top speed.

what do you think?

[ehnriko]

yes... :-) I think there's even a video of that.

[cyberlord64]

how would you extract energy from it?

[joelito101]

Well, if it if free floating, and it it being pulsed while floating, a bifilar coil might do the trick.

[jupy921]

Wow, WOW, I mean who builds their own polyphase motor? Your motor is a work of art. Outstanding job!

[theDaftman]

thank you

[toyomer]

Me parece altamente interesante. Hace años que quiero hacer mis propios proyectos, pero para eso también hay que saber apreder de los demás.

[bratstarr]

sorry fella,only just been able 2 c ur new vids (dont ask!) all i can say once again is thx thx & thx......ur work is an inspiration 2 all us lesser mortals who try 2 understand, but only do so after watching the fruits of ur long n hard labour of love.

plz keep ur eyes on the prize cuz without ur help we may never know wot is out there,if u feel u cant carry on plz write books or blogs so we may continue ur great work and maybe find the answers we r all lookin 4...thx again brat..:)

[BeefyCrackers12]

were you in the room when it broke?

if so did you get hit?

[theDaftman]

yes

no

thanks

[digitalenigma00]

Your professional approach, knack for detail, great creativity is always impressive! I wish I knew as much about electronics as you, had to resource to research the things you are! If anyone can crack the mysteries of electronic/magnetic kentic/self perpetuation, you can, keep up the excellent research man, you might just change the world one day if not save a lot of research for whoever does!

[TodMcInerney]

Yes, you have very methodical approach ... which I think helps your over unity project alot.

Thanks for posting

Ps: 1 new subsriber.

[giacotey]

:)) nice man veri nice..!

[uusedman]

Daftman, try to recycle the back EMF, and can you give some test results to see how close are we to overunity.

Wonderful video

[Eddiev1985]

Bummer! Sorry to hear about the breakdown. Glad you werent hurt. Tis the season for minor mishaps. Last week I had an HHO flashback and destroyed my first bubbler.."scared the wife". Mart blew a transistor and had a coil burn up, almost causing a fire. Now your system is throwing magnets! Lets all remember..."Safety First". Always wear safety glasses and use fuses to prevent fires. Great progress though! I love watching to see what you will do next. You always have me on the edge of

[Eddiev1985]

my seat Daftman!

Thanks for all you do.

Eddie

[HomeDistiller]

hho is a wank if you make your electrolysis device properly its easy to separate the O from the H

[darky10121987]

glad you did not get hurt daft man i enjoy watching your videos ^_^

[MoonSpyStudios]

Nice,,

daftman never ceases to amaze me,,, good job !

Bill