Added: 2 years ago
From: CustomXboxDesigns
Views: 54,829
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (154)

Sign In or Sign Up now to post a comment!
  • still works? :/

    

  • always cut the rumblers out they wastes ALOT OF BATTERIES

  • super glue is more afordible than a soldering gun

  • Down with the sickness by Disturbed HELL YEA

  • Since you already started reading you cant stop. My name is Kalena. I have black hair, and green eyes. I am 13. I was abused my whole life. I have no ears or nose, because my parents chopped them of with a rusty fork. I am dead. I will show up in your room in 13 days and kill you by chopping off your body parts with a rusty fork unless you repost this on 5 pages. If you do, something good will happen to you within 13 days. If you don't believe this, wait

  • where do you get the push button

  • where do u get the wire?

    

  • I haven't done this yet but this is the best tutorial ever

  • test it on a broken one

    

  • ... why not just buy one thats already done?

    anyone remeber the program pad for the super nintendo?

    you could input moves for fighting games and rapid fire came with it..

    why did they stop making thoes?

    mortal kombat fatality every time..

    good times ..good times :)

  • @snowbegone if u buy one its more expensive u idiot

  • @Johnracerx yeah so, if you screw up your controller you just blew 60 bucks but good luck with that

  • do you take of the right vibrater ...message back quickly please!

  • you sounds like justin bieber

  • sad kid.

  • does the mod work for black ops?

  • does the mod work for black ops?

  • whered you buy everything at?

  • OMG This is Justin bieber am not Jokeing not just his voice.

  • How to make one in under min is to be at gamestop and buy one and that how u do it :D

  • Ima gonna fail miserably and I turn it on and it catches on fire

  • @undeadzombie10 were you expecting some thumbs up...? ;l

  • I have the controller..

  • i prefer to buy a wildfire rapidfire controller wireless for £20 or under $15 for you guys in the U.S

  • @dxable1234 where from?

  • @bbbomberjk all good stores like walmart, gamestop or just look it up on amazon considering your living in the U.S or out of Europe

  • your middle finger works best?? _I_ :D COOL

  • does anyone actually do this..

  • ebay business?

  • noing me i would probly burn my mother borad

  • can you get baned ?

  • @anthonyra2010 yes you can get banned because it is system tampering

  • @rostereas thanx

  • @rostereas they dont actually know if it tampering since they are factory made modded controllers, in england we can buy mad cats (dont know if your english, american or other) controllers which is completely legal

  • @martynmc09 "(ii) your software and hardware have not been modified in any unauthorized way" boom fail

  • @anthonyra2010 here a little more go to the terms of agreement on xbox live and go to 14 or 15 (can't remember which one) i believe and read that section

  • @rostereas thanx

  • Down with the sickness by disturbed

  • whats the song at the end?

  • People these type of mods suck balls, buy a mod chip and do it the right way

  • loldisturbed ftw

  • i like trains.....:D

  • Instead of wasting any more time at 1:25 I paused the video and bought one for $30 bucks :D

  • wasted eight minutes of my life. that "rumble pack" is called a motor, that "motherboard" is not a motherboard, it's just a plain circuitboard. dipshit

  • Not good enough to play regular are youuuuuu.

  • I PUSH BUTTON!

  • uhhhh i rather just buy online D:

  • what color scissor should i have?

  • @R1zzaQ i would reccomend yellow.

    

  • does this work work for black ops. If it does can u make a video using the FN FAL and M1911. Please reply

  • @SexyModder1234 you would need a stelth controller

  • Death machine with modded controller FTW

  • as soon a he said " first off your going to need supplies", i already knew this wasnt going to happen.....

  • can you use solder glue?

  • @STEALTHWARRIORXBOX im not sure

    

  • @STEALTHWARRIORXBOX

    No I wouldn't do it. I mean you 'might' be able to get it to conduct but a "cold joint" is never a good thing and usually what leads to a short or complete frying of the board. Use a low-temp iron (like 15w or 20w) and a thin diameter 60/40 solder. It is easier to work with on a board and isn't so hot that it instantly melts away the pre-existing solder on the board which is often a headache when soldering circuit boards with things in place.

  • @cianw10 no its pronounced sodder

  • @MrBlueHippopotamus depends which country you live in, if you live in England its pronounces 'sol-der' :)

  • @mcfedoration yes but he's just making an assumption that its pronounced sol-der worldwide. the way the guy in the video says isn't wrong either.

  • @cianw10

    I am concluding that your 10 years old from the digits of your screen name, or you are a foreigner who is not fluent in the pronunciation of the English language. By the way, smartass is a deogatory term for attempting to be a know-it-all.

  • down to the sickness omg awesome!

  • y is it that every video u need s push button or a drill or somtin like that

  • @cianw10 Maybe in Soviet Russia...

  • Can you just use a hot glue gun?? Instead of soddering iron

  • you ne..... board, fucking little kid speak up

  • Does this still work?

  • @Ptrix2198 yes

  • @CustomXboxDesigns can u use 22 gauge wire

  • @Ptrix2198 no it got patched *Face desk*

  • @Ptrix2198 No they updated the controller via -_-

  • you only need 3 to 5 inches of wire, but I bought 35 feet

  • 15-24 (Solder) "No more because you can mumble mumble mumble" SPEAK UP KID dont talk under your breath.

  • I lol'd so hard at 7:19ish

  • Put Xbox in the Title whore

  • SUPER NEDDDDDDDDDDD

  • Yeah, you don't add solder to the iron and then put that to the wire, you'll end up with a cold solder joint. You put the iron to the surface at a 45 degree angle for about 5-10 seconds to heat it up a bit (assuming you're using the right wattage) and then add the solder from the opposite side of the iron. You also NEVER use a soldering iron to melt plastic. You'll ruin the end of your iron doing that. Measure the temp push button and then drill a proper hole, shaving as needed. IDIOT!!

  • what soldering iron is that

  • Your a hexnut.! Lol

  • B-O-R-I-N-G

  • eewwwwwwww its xbox

  • @cianw10 It actually is pronounced 'sodder' smartass ...

  • @MrDidHeDiedTheSecond No, no it is not. And if the definition of smartass is that I am right then yes, I am a smartass.

  • @cianw10 Stop talking ...

  • @MrDidHeDiedTheSecond yeah MrdidHeDiedTheSecond is right its sodder and ur definately an ass but i dont know about smart if you think its sol-der

  • fag

    

  • faggot

    

  • ths=is justy anoys her voice and everything

  • there $2 HEHE

  • what was the name of the ending song?

    that song was freakin awesome!!

  • @XGamer864 the ending song is down with the sickness by Disturbed.

  • @XGamer864 wow......... down with the sickness

  • "it should work, and if it doesnt works, mmm i dont know men, you must messed up"

  • Comment removed

  • voice like bieber xD

  • i care you fucking fagnut

  • hay dumb ass it's a circuit board not a mother board fag

  • @baked109 same thing fucktard

  • @D4NI3LGONZALEZZ no it not get ur shit right fuckface

  • @baked109 dude is the same shit no1 really even cares

  • So you need a total of 35 feet of wire or else it won't work?

  • 2:59 It's prodounced soLder, not soder.

  • @adamtuft No its not. 

  • @bnedella i know right

  • @bnedella you're telling me there's no "L" in "solder"?

  • @adamtuft its SOLDIER dumbass

  • Respond to this video...  nvm

  • for the ground wire do you have to sauder it to the c30 next to the rumble pack wires

  • @keewurdband332 Use 24+ or else you'll have too much resistance.

  • when soldering you transfer heat from the iron to contact and then add solder to the contact trust me it makes for a stronger weld and is much easier

  • It was things like this that ruined MW 2 :/ Rapid fire is lame.....

  • ay were u get the push botton at

  • its better to just but one so u dont mess up your controller

  • does it hav to be ribbon wire

  • i wonder what happens is you use it on mw2 ac130 0.o

  • @Guideist ur stupid the ac130 has to reload how could u mod it dumb ass

  • @SDNDxShotgunZ by doin a challenge lobby duh. i host them of course i know

  • @TheQuicksterOya shut the fuck up u cant mod shit ur probly 9 years old wishing he has a jtag you probly google the drivers and mother boards and pretend you know what your talking about... what mother board does your jtag have??? what driver does it have??? what program do you use for your ff's? what about your key vaults where you get those?

  • does it workk for Mw2 ???

  • @phone453 yes

  • Dude this is awesome . It really does work I bought all the supplies for about $23 bucks in total . Pretty cheap and on mw2 it doesn't work for my hadguns for some reason but it does for the default sniper hand gun? But it does really work on the FAL and ebr just great:)

  • does that work for tp3's?

  • U have to have a resistor. I already tried without doesnt work

  • can you use eney controlor or dose it have to have the resistor and can i use eney 24 guage wire

  • does it work on mw2?

  • it works for any first shooter games

  • Thx for telling us about the other soder point

  • dus this f*king work it better do ......try this take off your battery pack and look 2 the bottem left corner if it says tp3 than this vid will work anything elce and it wont work trust me also add me on xbox live if u wana no more my name is

    drunkpigeon02 add me

  • @Drunkpigeon02 shit face

  • rucking this didnt work i am only now typing with 7 fucking fingers and i am pissed kill ur self u dont now how to make a tut

  • Comment removed

  • @jonee140 Haha, you cant lose your fingers doing this such lies..

  • @cjoIIProductionz i cut my hand open long time ago when i tryed it

  • you are a girl??? xD

  • Why do you care?

  • lol as so as you said the hole was a little big i though super glue lololol

  • wow yall are fuckin nerds

  • The middle sliver thing is called a crystal

  • @ElectronicXFreak do you have to have the crystel or will it work if the controlor dosnt have it plz reply

  • can u get ban for using rapid fire

    ???

  • you can if more than 15 people report you in a day depending on how the moderators feel depends on if they check the report or not

  • in cod the server can detect a rapid fire and it bans u but halo 3 doesnt have that so ur alot safer using it on halo 3 instead of cod

  • lmao ya he acually does no wat hes talking about cuz i did it and it worked so ya

  • yea i have speaker wire also... will it work with that?

  • rofl i tried doing this without a torx screwdriver and it worked, i opened controller up i was redi to mod it then i put back together and no buttons even worked, so theres a risk modding one.... just buy one if u dont have proper material

    PISS!!!

  • halo 3

  • and alos wat kind of wire do i need 24 gauge and is it speaker wire

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more