@FawxNewbz Cheers, whole set up including Mac <£2000. Mac since died, so had to invest in new PC, sound card, software upgrades ect ect.. list goes on lol. But all self funded.
this has nothing to do with the vid but i cant stand people who think they have to hit the heads hard like travis barker. i have a buddy who thinks you have to beat them to death to get good. naive little bastards.
yamaha dd55-->midi out (cable) to midi in in roland module, then roland td6 (in my case will be td9)--->midi out/usb cable to pc or notebook?
So there are 1 midi-midi cable, and 1 midi-usb...right? Watching your video gave me the idea to buy a cheap yamaha dd to add some extra pads instead of buying the more expensive roland pads!
@youtalia Yep that is correct, in the case of the TD6 you have to set the MIDI out to MIDI thru in the module's settings. Then all the MIDI date transmitted from the Yamaha DD will be sent along with the data transmitted by the TD6/9 to your PC via the USB interface. Just make sure that the pads on the Yamaha DD are using different Midi notes to the pads on the TD6/9.
I have the same kit pretty much, the midi to usb cable and dfh 2 but am having problems getting the midi to come through, what settings do you have on your module? thanks!
@gumbootiner The setting on the module is the factory setting, You will need to set Superior 2 to receive on the correct midi notes as what is sent out from the module. Click the midi learn for a drum in Superior then hit the correseponding kit piece. however, if you are not getting any midi signals from the module to your host application it could be a problem with the MIDI settins in your host application....
@TheRockinQ They do work with the TD6, I use one as the ride. but i dont think the triple triggering is supported only dual. I far as I am aware you can either use the bow/bell or bow/edge out on the cy12, either way, some of the ride sounds are velocity sensitive, so cause you naturally stick the bell harder you can use the one cymbal to trigger 3 sounds....
@TheRockinQ Yes, if I understand your question correcly. Sticking the cy produces note on/off messages and choke uses MIDI CC message. So regardless of which Zone you strick on the CY you are able to choke the sound.
Great vid man, good playing, and sweet sounds! I gota TD6 and superior drummer 2.0 Im using cubase 5 and I got a midi to usb lead straight in. Most things work well but I cant get the bell to or choke to work on the cymbols, and the highat opening and closing isnt great doesnt go thru the variations well. Any tips on what you have done to get everything working so well? ;) Much appreciated!
@beavisthelizard Hi, Right, to get the bow/bell working as far as I can remember you need to set up midi nodes for the ride, so it velocity switches between the bow sound and the bell sound depending on how hard you hit the ride. Choke you need to set the midi aftertouch in the Envelope section of the construct window. Hihat - cant remember. I think I have a combined preset with all the above set up. Give me a few mins and I will PM you with a link to download it if I can....
@danilobatterista Yeah DFH is a 'softsampler' produced by a company called toontrack. The Yamaha is connected with a MIDI lead to the MIDI thro on the TD6 then a USB-MIDI interface connects the TD6 to the Mac, so the signal from the DD55 passes thro the TD6.
@soohyunfanz Yeah the mesh heads dont make much noise, I have the rubber headed kick trigger tho, which makes a bit more noise than the mesh headed drums.
@inviscid43 DFH Superior is the sampler and I use Cubase as a host. I was using a Apple Mac also when this vid was made, think they are better at handling latency than PC..
I think all the guys here doesnt get it that Drum Kit from Hell ist just a VST-Plugin, or easy said it is a programm which make your e-kit sound more like a real acoustic kit!
@TalentlessNoob The TD6Kx was just over £1000 new and the Yamaha DD55 was about £150ish new. Think the TD6 has now been replaced by the TD9?? and the DD55 by DD65??
I live in a flat (apartment?) so cant practise on a real kit with out neigbours complaining. The DD55 is not that great, would not have brought one if I already had the Roland kit. I do use a softsample called DFH by Toontrack, all the sounds in this video are not from the Roland kit, I found it very different feel to playing a real kit, would definatly suggest going into a shop which has one set up and having a go on one be for you comit to buying. Hope that helps a bit....
Hi, to get the Midi data in to the PC I use a Edirol UM1X, think that is discontinued now. But any Usb Midi interface should do. Cakewalk do a UM-1G MIDI Interface which is pretty similar, I think.
Hi, to get the Midi data in to the PC I use Edirol UM1X, that is discontinued now. Think that the Cakewalk UM-1G MIDI Interface is pretty similar tho. But any USB MIDI interface should do the trick.
Hi, to get the Midi data in to the PC I use Edirol UM1X, that is discontinued now. Think that the Cakewalk UM-1G MIDI Interface is pretty similar tho. But any USB MIDI interface should do the trick.
ye you can change ambience, sensitivity and level thats about it for the sound but sadly no tuning options for pitch not on the E kits ive come accross so far and ive seen a 5 grand kit that doesnt let you change pitch thats probably the only bad thing about E drums
do you have three way triggering for the ride? or am i just hearing things? if so how'd you set that up? i've read that the td-6v doesn't support three way triggering...only the td-4 12 and 20
actually...the CY-12 and CY-15 are three zone cymbals...they have two outputs...one for bow/bell and another for bow/edge. Just wondering how you got the bell/bow/edge sound all on the ride. How do you have that cymbal connected to your module? are you using both outputs of the cymbal? or just one?
then how are you getting the ride edge sound, bell sound, and the bow sound all with one output? are you using edrum monitor or something to map softer hits to bow and harder hits to bell? how bout the edge? i guess you can't answer my question definitively unless i see it for myself...thanks anyways
Hi, I use Superior 1. All I did was to load the relevant Key Map for the kit, which was on the CD. Not sure how Superior 2 works but try adjusting the envelope/aftertouch section...
Hi! I have finally found how to choke but the strange thing is I have to manually "LEARN" the signal sent from the drum because Superior lost this parameter everytime (maybe beacuse it's not a simple midi note).
Anyway I'm doing some interest acustic preset with TD12+DD55, I have done some test audio (no video yet). See you! :)
Guys--- With any of these programs→ EZ/ BFD/Superior--Is it as simple as just firing up the software ...going e drums midi->usb in to the computer and then just mapping your kit to any ezdrummer sound ?
no,, way diff, you'll need a computer prefferably a laptop, and a host program such as fl studio 8 or cubase etc. then you'll need a audio midi interface, which gets rid of latency, so that way when you hit the pad, the sounds trigger then, as them triggering 2 seconds later or what not! and thast about it!
noob...it triggers at the right time...there's latency in the output of the sound...no latency in input unless you have an OLLLLD computer...but most comps 7 years old and younger are good...and download ASIO4ALL 2.9 for onboard cards and they have dedicated ASIO drivers for more expensive and external audio soundcards
Hey, nice video! I have a few question, I have the same roland brain, and I was wondering: with your dd55, can you change the pad's sound through the roland brain? Like for instance if I wanted a roland sound effect on the dd55, could that be done? Also, I noticed your cymbals are playing in stereo rather than mine. I can only get one sound out of them, Do you know the model of your cymbals? I believe mine are different, and I'm looking to replace them with some dual triggers cymbals! Thanks!
Cheers, Im not really sure. My DD55 is running thro the TD6, then both are connected to a software sampler called DFH Superior. So basically the sounds you are hearing are not from the TD6 brain. My cymbals are a cy12 r/c and a cy 8. Hope that helps a bit.
I know you said any good instrument shop, but could you be a bit more specific please? Did you have to go into somewhere like PMT and ask them to order one or where you in a specific shop like Allegro? Thanks, cool video!
I got mine form a shop in London called 'Turnkey'. to be honest I think roland have discontinued the TD6 and poss replaced it with the TD4s and TD9s. But most Drum shops, (google; drumwright or drumshop) I have been into stock Edrums, or will deliver to you.
Hello, you have no midi latency,nice 1!!mine is hooked up from td6v to laptop with just a midi cable to mbox protools but got a little latency!notice you use midi out to mac usb ,is this a better way of hookin up,Any advise would be cool thanks ezdrummer btw.
i use ezdrummer drummer, a midi cable from the module, to a tascam us-144 zero latency audio midi interface, and that usb into laptop usin fruity looops and ezdrummer hope it helps
how much did the td-6 cost you mate? because im intrested in buying one for myself, yer just let me know thanks mate have a good 1! good mixture of drums 2 btw.
Hi ther It souds amaising with the superior drummer , how do you plug them to your mac via MIDI or USB , ? and do you plug them separately ?jajaja I´m interested in the yamaha
The Yamaha is plugged into the the MIDI Thru on the TD6 using a standard MIDI cable, and the TD6 is plugged into the Mac using a MIDI - USB interface.
I've had some guys that play there acoustic kits play my TD-6 and they say they want to get triggers for their kits so they can play the sounds on it, mainly because it sounds great and you have 100 kits that are edit-able and it saves having to mic an acoustic kit.
I have the TD-6 but only the snare is mesh, I bout another cymbal and another kick for it (KD-8) it works if you have a splitter plugged into the kick input, I use a mono 1/4m x 2x 1/4f plastic "y" , I think you can use 1/4" patch cables as I have one that is and the dual zone cable that came with it plugged into mine. I am interested in how he has the yamahahooked up here, I have one too ,I have an Alesis control pad as well I'd rather use. also Bill Ward signed my Mesh snare for me 8D .
thats pretty cool see what hes done there=D not to fond of electric kits my self because there just not authentic for technique but they are pretty cool=D
only thing I don't like about electric sets is how sensitive the snare and kick are, you can tell this guy is having a hard time with it at some spots, especially the snare.
Can I ask you something? I got the same elctronic kit and my kickdrum pad keeps on moving and I cannot seem to find a way to make it stop. Maybe you know how to do that?
I got mine on really thick carpet with the spikes on the pad and the pedal stuck in. not had any trouble with it moving so far. But I had that prob with an acustic kit B4 and just stuck a really heavy amp in front which worked....Not sure if that helps tho....
ha i just read that whole conversation under my comment. i'm with einskraft though. i mean, scissorhand26 is completely right. but geese einskraft might kill himself now HAHAHAHAHAHAHAHAHAAHAH
Both were stupid. It is both. You must know how to play hard but you also most be able to have control (soft). If you play a groove soft it sounds insecure. There must be a firm backbeat. All (as good as) Pro drummers beat like mad man on their drumset but you have to know how to direct that energy into a relaxed sound cause if you just start beating like a redneck as scissorman said you just get a clumsy tense sound.
You are an idiot. The point of playing drums isn't just to hit them harder. If you think the purpose of music is to be tough then I think you are in the wrong field. Go play football, or do boxing.
Or, when you play with softer dynamics, you get an intentionally quieter and softer sound. There is nothing definite in music. This guy doesn't seem to be attempting a loud dynamic in his performance. Go listen to some heavy metal or something.
Oh my god. Idiot. So you only like the softer notes? Go listen to some classic music then. I was simply commented on that he should hit the drums harder, for both a soft and harder notes. Don't come back stupid replies like you are at the moment.
Actually what I prefer is people who actually understand how to play drums well, and don't just beat on it like it's their redneck wife. Your comment to the poster was not useful, it was a moronic put down claiming he was a pussy. You didn't say "try to use more loud dynamics, because a song in this style plays best with heavy percussion." I would have agreed with that, and even given you a thumbs up, if you had said that.
@FawxNewbz Prob got wires crossed there mate, the 2k included kit, Superior Drummer, Yamaha DD55, Apple Mac, If ya ment just the TD6 kit then 1K
willdrumforcash 4 months ago in playlist willdrumforcash's favourites
@FawxNewbz Cheers, whole set up including Mac <£2000. Mac since died, so had to invest in new PC, sound card, software upgrades ect ect.. list goes on lol. But all self funded.
willdrumforcash 4 months ago
this has nothing to do with the vid but i cant stand people who think they have to hit the heads hard like travis barker. i have a buddy who thinks you have to beat them to death to get good. naive little bastards.
tacticalshroom 5 months ago
WOw! So this is the right way to connect: (?)
yamaha dd55-->midi out (cable) to midi in in roland module, then roland td6 (in my case will be td9)--->midi out/usb cable to pc or notebook?
So there are 1 midi-midi cable, and 1 midi-usb...right? Watching your video gave me the idea to buy a cheap yamaha dd to add some extra pads instead of buying the more expensive roland pads!
by the way, thanks for the video
youtalia 6 months ago
@youtalia Yep that is correct, in the case of the TD6 you have to set the MIDI out to MIDI thru in the module's settings. Then all the MIDI date transmitted from the Yamaha DD will be sent along with the data transmitted by the TD6/9 to your PC via the USB interface. Just make sure that the pads on the Yamaha DD are using different Midi notes to the pads on the TD6/9.
willdrumforcash 6 months ago
That Hi-Hat is offensively small :(
Braollus 7 months ago
feeling sleepy while watching this video....
vayne361 9 months ago
...watching this reminded me to water my artificial plants...
kevinditzlerchecket 9 months ago
I have the same kit pretty much, the midi to usb cable and dfh 2 but am having problems getting the midi to come through, what settings do you have on your module? thanks!
gumbootiner 9 months ago
@gumbootiner The setting on the module is the factory setting, You will need to set Superior 2 to receive on the correct midi notes as what is sent out from the module. Click the midi learn for a drum in Superior then hit the correseponding kit piece. however, if you are not getting any midi signals from the module to your host application it could be a problem with the MIDI settins in your host application....
willdrumforcash 9 months ago
Can you add extra toms or cymbals or does it only house a certain amount.
mexicanbear77 10 months ago
@mexicanbear77 you can add one more trigger than I have in the video.
willdrumforcash 9 months ago
I have Cubase SX 3 and a midi cable but what do I do it where the cable comes out in computer please help me
osmanichuf 10 months ago
@osmanichuf I think what you need is a MIDI-USB Interface so you can connect the MIDI out on the kit to a USB port on your computer.
willdrumforcash 10 months ago
@willdrumforcash
the midi cable that is not connected to the Td 6 Module connects or how they think the
So I need a midi usb cable
osmanichuf 10 months ago
wow im sick of seein vides of these drums sets...everyone that owns one fucking sucks my cock WOW!!!!!!
paperpro3223 10 months ago
@paperpro3223 Hate to disappoint but I am not that way inclined, Sorry mate.
willdrumforcash 10 months ago
Does the TD6 support triple zone cymbals like the CY-12?
TheRockinQ 10 months ago
@TheRockinQ They do work with the TD6, I use one as the ride. but i dont think the triple triggering is supported only dual. I far as I am aware you can either use the bow/bell or bow/edge out on the cy12, either way, some of the ride sounds are velocity sensitive, so cause you naturally stick the bell harder you can use the one cymbal to trigger 3 sounds....
willdrumforcash 10 months ago
@willdrumforcash Thanks for the quick reply! I have another question. Can you use dual zone and choke at the same time?
TheRockinQ 10 months ago
@TheRockinQ Yes, if I understand your question correcly. Sticking the cy produces note on/off messages and choke uses MIDI CC message. So regardless of which Zone you strick on the CY you are able to choke the sound.
willdrumforcash 10 months ago
Great vid man, good playing, and sweet sounds! I gota TD6 and superior drummer 2.0 Im using cubase 5 and I got a midi to usb lead straight in. Most things work well but I cant get the bell to or choke to work on the cymbols, and the highat opening and closing isnt great doesnt go thru the variations well. Any tips on what you have done to get everything working so well? ;) Much appreciated!
beavisthelizard 11 months ago
@beavisthelizard Hi, Right, to get the bow/bell working as far as I can remember you need to set up midi nodes for the ride, so it velocity switches between the bow sound and the bell sound depending on how hard you hit the ride. Choke you need to set the midi aftertouch in the Envelope section of the construct window. Hihat - cant remember. I think I have a combined preset with all the above set up. Give me a few mins and I will PM you with a link to download it if I can....
willdrumforcash 11 months ago
Thank you.. great help!
littlewack2005 11 months ago
Hi, Can you plug an mp3 player straight into the brain on the td6kx to play along to mp3's? Much appreciated if you can help me?
littlewack2005 11 months ago
@littlewack2005 Yeah the TD6 has a 3.5mm jack plug 'Mix in' so you can connect a mp3 player to it using a male to male 3.5mm jack lead.
willdrumforcash 11 months ago
Hey man! Great sound, is 'Drummer from hell' a software you're using meanwhile? And did you connect the yamaha dd 55 to your Mac?
danilobatterista 11 months ago
@danilobatterista Yeah DFH is a 'softsampler' produced by a company called toontrack. The Yamaha is connected with a MIDI lead to the MIDI thro on the TD6 then a USB-MIDI interface connects the TD6 to the Mac, so the signal from the DD55 passes thro the TD6.
willdrumforcash 11 months ago
wow head phones really work. are the drums almost silent ? please reply i need advice!
soohyunfanz 1 year ago
@soohyunfanz Yeah the mesh heads dont make much noise, I have the rubber headed kick trigger tho, which makes a bit more noise than the mesh headed drums.
willdrumforcash 1 year ago
i dont think you have drums from hell, because there are no drums in hell.
enjoy your drums from anywhere else than hell!
Biotektan 1 year ago
thanks for the quize
osmanichuf 1 year ago
can you play the rim of the toms and the hi-hat cy12h
osmanichuf 1 year ago
@osmanichuf I dont think that the DT6v supports rim triggering from the PD85 pads, think it does if you are using PD8 pads.
The hi hat does support bow and edge triggering.
willdrumforcash 1 year ago
the fill at 2:55 is really dope, will be referring back to this
aridderb 1 year ago
@aridderb Cheers mate!
willdrumforcash 1 year ago
nice man
aridderb 1 year ago
Comment removed
johnbambammorgan 1 year ago
How did you connect the other little box pads to the brain?
Sephlolege 1 year ago
@Sephlolege Set the MIDI in on the TD6 to 'MIDI thro' then use a MIDI cable between the Pads MIDI out to the MIDI in on the TD6.
willdrumforcash 1 year ago
what number is the rim of the snare please write back to me
osmanichuf 1 year ago
@osmanichuf Hi, I am not using any of the sounds from the TD6 Brain, I am using DFH Superior sounds
willdrumforcash 1 year ago
is it connected just by a midi cable ? :D Wanna do the same
drummer9000 1 year ago
@drummer9000 It is connected with a MIDI USB interface.
willdrumforcash 1 year ago
Nice Setup
JonothanSiple777 1 year ago
what program are you using as your sampler? i have a hard time getting my latency low enough to make it playable. do you have much latency?
inviscid43 1 year ago
@inviscid43 DFH Superior is the sampler and I use Cubase as a host. I was using a Apple Mac also when this vid was made, think they are better at handling latency than PC..
willdrumforcash 1 year ago
@willdrumforcash
you my sir are wrong
PC is far more superior in "handling" latency
Mac is good for media based things
and thats where the greatness of Mac ends
MantirayFromSpace 1 year ago
@MantirayFromSpace Fair enough. If you want a PC vs Mac argument go elsewhere, I can only speak from personal experience.
willdrumforcash 1 year ago
@willdrumforcash who the hell cares? their computers... lol
OFFICALTHREEHALFS 1 year ago
@MantirayFromSpace naa cause a pc will just crash
pchurk 1 year ago
siik drumming sound like this guy check him out...el negro hernandez
jonguitarist 1 year ago
They are being dicks.... Don't listen to the haters... It is very good and cool man, Cheers!
Alcoholandastronauts 1 year ago
Just started playing the drums; but can you [or anyone] tell [or point] me [to] HOW you do a mini-roll on the snare as you start a fill? Thanks guys.
natgalmac 1 year ago
@natgalmac i'm asking me the same...
TheSpallanzani 1 year ago
how do you install it?
XpEAnUTBuTtERsUckSX 1 year ago
I can hear it just fine.
buddahbeast 1 year ago
I think all the guys here doesnt get it that Drum Kit from Hell ist just a VST-Plugin, or easy said it is a programm which make your e-kit sound more like a real acoustic kit!
ThePretender94 1 year ago 2
where the fuck are the drums from hell?
You're kind of faker! You fraudsters!
You stole my time :-(
LilFabBeatz 1 year ago
@LilFabBeatz thats the name of the kit he is using on his electric drumset
punkrockpax 1 year ago
@LilFabBeatz sorry mate dont understand you?? drums from hell is what you can hear when you whatch this video.???
willdrumforcash 1 year ago
@willdrumforcash yeah and I mean that I can't hear the drums from hell!
LilFabBeatz 1 year ago
@LilFabBeatz I dunno what to say then mate, the sound is working fine on here when I view it.
willdrumforcash 1 year ago
@LilFabBeatz hey noob...drums from hell is a superior drummer line...it's computer software based sound triggering program...get with it man
dpaik360 1 year ago
@dpaik360 yeah now i know it.. i don't play with an e-drum... everything is alright :-)
LilFabBeatz 1 year ago
how much was that roland td 6 kit and that thing your using honest answer please =)
TalentlessNoob 1 year ago
@TalentlessNoob The TD6Kx was just over £1000 new and the Yamaha DD55 was about £150ish new. Think the TD6 has now been replaced by the TD9?? and the DD55 by DD65??
willdrumforcash 1 year ago
@willdrumforcash ahh thats not so bad im from the states so it might be same price not sure lol is it worth buying lol
TalentlessNoob 1 year ago
@TalentlessNoob
willdrumforcash 1 year ago
I live in a flat (apartment?) so cant practise on a real kit with out neigbours complaining. The DD55 is not that great, would not have brought one if I already had the Roland kit. I do use a softsample called DFH by Toontrack, all the sounds in this video are not from the Roland kit, I found it very different feel to playing a real kit, would definatly suggest going into a shop which has one set up and having a go on one be for you comit to buying. Hope that helps a bit....
willdrumforcash 1 year ago
how did you connect your drumset to your pc? i have the Roland HD-1 and i dont know what cable to buy...
please answer
thanks
eminem1022 2 years ago
Hi, to get the Midi data in to the PC I use a Edirol UM1X, think that is discontinued now. But any Usb Midi interface should do. Cakewalk do a UM-1G MIDI Interface which is pretty similar, I think.
willdrumforcash 2 years ago
Hi, to get the Midi data in to the PC I use Edirol UM1X, that is discontinued now. Think that the Cakewalk UM-1G MIDI Interface is pretty similar tho. But any USB MIDI interface should do the trick.
willdrumforcash 2 years ago
Hi, to get the Midi data in to the PC I use Edirol UM1X, that is discontinued now. Think that the Cakewalk UM-1G MIDI Interface is pretty similar tho. But any USB MIDI interface should do the trick.
willdrumforcash 2 years ago
The cymbals don't sound much worse than the others. haha They just sound more like a splash or china. cool
RikJamezBich 2 years ago
How did you mout the dd55 that high? i'm wanting to do the same with my dd65
Cheers :)
bj998989 2 years ago
I mounted the top half of a snare cradle in the bottom half of a cymbal stand, then put that on a little table, not the sturdiest creation......
willdrumforcash 2 years ago
@willdrumforcash thanks alot :)
bj998989 2 years ago
hey!
for the ride cymbal, do u use a y cable?
drummingsebber 2 years ago
no, I dont.
willdrumforcash 2 years ago
Did you use ASIO for all to reduce latency
and if you did what did you set it to if you don't mind me asking.
CleanEdgeProductions 2 years ago
No, I dont use that. Just use the drivers that are already on my Mac or what came with the MIDI interface..... not too sure really.... Sorry
willdrumforcash 2 years ago
do all td 6's have bouncy white skins also PLEAAAAAAAAAAASE tell what other ones have those bouncy white skins
MrMetalhead9182 2 years ago
I think only the TD6kx has the mesh skins and the TD6 has rubber ones.
willdrumforcash 2 years ago
my td6 came with one mesh skin and the rest rubber.
Axerty1234 2 years ago
yeah only the TD6 KX has all mesh heads
willdrumforcash 2 years ago
rofl
beastrevor 2 years ago
Hey nice video and a question i was wondering is it possible to tune the drum sounds snare toms ? Ambiance and all that other stuff doesn't matter.
Vartex 2 years ago
Hi, No you can't really tune them, but I think you can adjust the pitch or each sample.
willdrumforcash 2 years ago
I know this is a stupid question but how you can plug electric drums to computer? like with what cord or something.
Pete9789 2 years ago
Not at all, Any MIDI> USB Interface.
willdrumforcash 2 years ago
ye you can change ambience, sensitivity and level thats about it for the sound but sadly no tuning options for pitch not on the E kits ive come accross so far and ive seen a 5 grand kit that doesnt let you change pitch thats probably the only bad thing about E drums
DRUM8EAT 2 years ago
do you have three way triggering for the ride? or am i just hearing things? if so how'd you set that up? i've read that the td-6v doesn't support three way triggering...only the td-4 12 and 20
dpaik360 2 years ago
Yeah, Think the Cy12 is a dual trigger. And uses velocity to trigger the the third sound, the bell.
willdrumforcash 2 years ago
actually...the CY-12 and CY-15 are three zone cymbals...they have two outputs...one for bow/bell and another for bow/edge. Just wondering how you got the bell/bow/edge sound all on the ride. How do you have that cymbal connected to your module? are you using both outputs of the cymbal? or just one?
dpaik360 2 years ago
I'm Using the bow/edge output. hitting the bow or the bell area of the Cy harder triggers a bell sound, softer triggers the bow sound.
willdrumforcash 2 years ago
then how are you getting the ride edge sound, bell sound, and the bow sound all with one output? are you using edrum monitor or something to map softer hits to bow and harder hits to bell? how bout the edge? i guess you can't answer my question definitively unless i see it for myself...thanks anyways
dpaik360 2 years ago
Sorry I cant help you much... I just plugged it in at thats the way it worked...
willdrumforcash 2 years ago
hi, I've just buy a TD-12 and I'm trying to trigger Superior 2, I have some problems with choke... did you set something in particular way?
Thanks, bye.
Lorenzo (Italy)
portnoy256 2 years ago
Hi, I use Superior 1. All I did was to load the relevant Key Map for the kit, which was on the CD. Not sure how Superior 2 works but try adjusting the envelope/aftertouch section...
willdrumforcash 2 years ago
Hi! I have finally found how to choke but the strange thing is I have to manually "LEARN" the signal sent from the drum because Superior lost this parameter everytime (maybe beacuse it's not a simple midi note).
Anyway I'm doing some interest acustic preset with TD12+DD55, I have done some test audio (no video yet). See you! :)
portnoy256 2 years ago
how much do these cost?
BennyMetal7 2 years ago
like over $3000
jaf12moreyra5648 2 years ago
It's over nine thousaaaaaaaaaaaaaand...
adalvideos 2 years ago
Guys--- With any of these programs→ EZ/ BFD/Superior--Is it as simple as just firing up the software ...going e drums midi->usb in to the computer and then just mapping your kit to any ezdrummer sound ?
FullMetalJackSquat 2 years ago
no,, way diff, you'll need a computer prefferably a laptop, and a host program such as fl studio 8 or cubase etc. then you'll need a audio midi interface, which gets rid of latency, so that way when you hit the pad, the sounds trigger then, as them triggering 2 seconds later or what not! and thast about it!
jennafan14 2 years ago
noob...it triggers at the right time...there's latency in the output of the sound...no latency in input unless you have an OLLLLD computer...but most comps 7 years old and younger are good...and download ASIO4ALL 2.9 for onboard cards and they have dedicated ASIO drivers for more expensive and external audio soundcards
dpaik360 2 years ago
Hey, nice video! I have a few question, I have the same roland brain, and I was wondering: with your dd55, can you change the pad's sound through the roland brain? Like for instance if I wanted a roland sound effect on the dd55, could that be done? Also, I noticed your cymbals are playing in stereo rather than mine. I can only get one sound out of them, Do you know the model of your cymbals? I believe mine are different, and I'm looking to replace them with some dual triggers cymbals! Thanks!
DuroMentis 2 years ago
Cheers, Im not really sure. My DD55 is running thro the TD6, then both are connected to a software sampler called DFH Superior. So basically the sounds you are hearing are not from the TD6 brain. My cymbals are a cy12 r/c and a cy 8. Hope that helps a bit.
willdrumforcash 2 years ago
I know you said any good instrument shop, but could you be a bit more specific please? Did you have to go into somewhere like PMT and ask them to order one or where you in a specific shop like Allegro? Thanks, cool video!
RockrLegend 2 years ago
I got mine form a shop in London called 'Turnkey'. to be honest I think roland have discontinued the TD6 and poss replaced it with the TD4s and TD9s. But most Drum shops, (google; drumwright or drumshop) I have been into stock Edrums, or will deliver to you.
willdrumforcash 2 years ago
Great, thanks a lot mate!
RockrLegend 2 years ago
This has been flagged as spam show
I sent you a private message, =)
MissPlummable 2 years ago
what are drums from hell?
alejoroca5 2 years ago
its a sample based drum software synthesizer
willdrumforcash 2 years ago
does the TD6kx come with double bass?
jcces44 2 years ago
The Kd8 bass drum pad is compatible with double pedals.
willdrumforcash 2 years ago
it depends the store give you
i got a double bass pedal for free with my TD-12
and my TD-9
xtomokixx 2 years ago
how much for the kit cause i drum 2 and i want one like that pls write back
KSIRancor 2 years ago
£1000ish
willdrumforcash 2 years ago
hey man, if u are going to sell the roland kit, we should arranger something man like you was saying on the 5th of June....
comment me back for more details..
cheers bro have a good 1!!
jtc95 2 years ago
Yeah, I not selling mine mate. Think you should contatct 'MattsaMarimba'
willdrumforcash 2 years ago
perfect im rather jealous lol
tayishere202 2 years ago
nice 4*
dc8poker 2 years ago
great set-up as well as great playing.
MrMichaelSchwark 2 years ago
Cheers mate!
willdrumforcash 2 years ago
Hello, you have no midi latency,nice 1!!mine is hooked up from td6v to laptop with just a midi cable to mbox protools but got a little latency!notice you use midi out to mac usb ,is this a better way of hookin up,Any advise would be cool thanks ezdrummer btw.
pearloid01 2 years ago
i use ezdrummer drummer, a midi cable from the module, to a tascam us-144 zero latency audio midi interface, and that usb into laptop usin fruity looops and ezdrummer hope it helps
jennafan14 2 years ago
how much did the td-6 cost you mate? because im intrested in buying one for myself, yer just let me know thanks mate have a good 1! good mixture of drums 2 btw.
jtc95 2 years ago
£1100
willdrumforcash 2 years ago
im probably selling mine if your still trying to find one, fairly cheap
MattsaMarimba 2 years ago
mIZZEGA CHE SUONI!! FANTASTIC!
arconda666 2 years ago
Hi ther It souds amaising with the superior drummer , how do you plug them to your mac via MIDI or USB , ? and do you plug them separately ?jajaja I´m interested in the yamaha
wierddrummer 2 years ago
The Yamaha is plugged into the the MIDI Thru on the TD6 using a standard MIDI cable, and the TD6 is plugged into the Mac using a MIDI - USB interface.
willdrumforcash 2 years ago
Okies16...
I've had some guys that play there acoustic kits play my TD-6 and they say they want to get triggers for their kits so they can play the sounds on it, mainly because it sounds great and you have 100 kits that are edit-able and it saves having to mic an acoustic kit.
mself61 2 years ago
I have the TD-6 but only the snare is mesh, I bout another cymbal and another kick for it (KD-8) it works if you have a splitter plugged into the kick input, I use a mono 1/4m x 2x 1/4f plastic "y" , I think you can use 1/4" patch cables as I have one that is and the dual zone cable that came with it plugged into mine. I am interested in how he has the yamahahooked up here, I have one too ,I have an Alesis control pad as well I'd rather use. also Bill Ward signed my Mesh snare for me 8D .
mself61 2 years ago
Is there a double-kicker on this or a way to have one?
These drums look amazing, I'm hoping to get a set one day.
Lortwogo 2 years ago
Yeah, a double pedal will fit the kick pad.
willdrumforcash 2 years ago
cool pads are cool holy fuck
jian2069 2 years ago
thats pretty cool see what hes done there=D not to fond of electric kits my self because there just not authentic for technique but they are pretty cool=D
Okies16 2 years ago
i saw that in store and it costs about $ 1350
ascortjkk 2 years ago
nice set, I am gonna get this set, but I need to know can you turn the lugs to ajust the tension on the head?
airsoftguitardrum900 2 years ago
Yeah you can on the pads with the mesh heads.
willdrumforcash 2 years ago
only thing I don't like about electric sets is how sensitive the snare and kick are, you can tell this guy is having a hard time with it at some spots, especially the snare.
ryanthepunk2002 2 years ago
how much for this set up? american
Slayer32273 2 years ago
cost me about £1100
willdrumforcash 2 years ago
Can I ask you something? I got the same elctronic kit and my kickdrum pad keeps on moving and I cannot seem to find a way to make it stop. Maybe you know how to do that?
laxativesuicide 2 years ago
I got mine on really thick carpet with the spikes on the pad and the pedal stuck in. not had any trouble with it moving so far. But I had that prob with an acustic kit B4 and just stuck a really heavy amp in front which worked....Not sure if that helps tho....
willdrumforcash 2 years ago
Hahaha!
Atedaze8 2 years ago
hola buen video
estudiogg 3 years ago
Thanks
willdrumforcash 3 years ago
you just play like on your own or you got a song playing in your headset ?
darkeightball 3 years ago
Yeah, just randomly playing, not playing along to anything.
willdrumforcash 3 years ago
this is the first time ive ever heard good sounding electric drums imo
drex48239 3 years ago
Great drumming BTW!!!
philateliceun 3 years ago
Thanks!
willdrumforcash 3 years ago
Make more videos?????
DeadSilence2009 3 years ago
Hey cool! I have a dd55 too im 12 so i just jam and play solos
MettallicaHD 3 years ago
Where??? o0
Tiritor 3 years ago
ha i just read that whole conversation under my comment. i'm with einskraft though. i mean, scissorhand26 is completely right. but geese einskraft might kill himself now HAHAHAHAHAHAHAHAHAAHAH
superbike749s 3 years ago
Both were stupid. It is both. You must know how to play hard but you also most be able to have control (soft). If you play a groove soft it sounds insecure. There must be a firm backbeat. All (as good as) Pro drummers beat like mad man on their drumset but you have to know how to direct that energy into a relaxed sound cause if you just start beating like a redneck as scissorman said you just get a clumsy tense sound.
philateliceun 3 years ago
agreeed
superbike749s 3 years ago
This comment has received too many negative votes show
omg... hit the drums harder!!! you're being a pussy with them!!!
EiNSkraft 3 years ago
u r the 2nd to say that. I had just got the kit when I made this vid, So yeah! wasnt sure how much of a battering it would take!!
willdrumforcash 3 years ago
Ah right I see, yeah i know what you mean now!
EiNSkraft 3 years ago
You are an idiot. The point of playing drums isn't just to hit them harder. If you think the purpose of music is to be tough then I think you are in the wrong field. Go play football, or do boxing.
ScissorHand26 3 years ago 4
Wow, that is the most idiotic reply ever!
Listen, When you hit a drum harder you get a louder, pro-longed sound, never heard of that? no? Then go play ywith your little zylaphone!
EiNSkraft 3 years ago
Or, when you play with softer dynamics, you get an intentionally quieter and softer sound. There is nothing definite in music. This guy doesn't seem to be attempting a loud dynamic in his performance. Go listen to some heavy metal or something.
ScissorHand26 3 years ago
Oh my god. Idiot. So you only like the softer notes? Go listen to some classic music then. I was simply commented on that he should hit the drums harder, for both a soft and harder notes. Don't come back stupid replies like you are at the moment.
EiNSkraft 3 years ago
Actually what I prefer is people who actually understand how to play drums well, and don't just beat on it like it's their redneck wife. Your comment to the poster was not useful, it was a moronic put down claiming he was a pussy. You didn't say "try to use more loud dynamics, because a song in this style plays best with heavy percussion." I would have agreed with that, and even given you a thumbs up, if you had said that.
ScissorHand26 3 years ago 2
You could have at least spelled xylophone right :)
ydargc 3 years ago 4
How u put the ez drummer sounds on the roland set? wish i could do that too, because i dont like the td6 sounds at all ;(
SealedStrenght 3 years ago
The DFH sampler is on an Apple Mac and the TD6 is triggering the sounds through MIDI.
willdrumforcash 3 years ago