Can you post a parts list I would like to build one of these and I it's possible I would like to have 350 fps but I'll be happy at 320. Please feel free to answer me on this account it is a gmail.
@doofusmonkey2 lol, even for CQB this is retarded... also the sites all over the world are very different... we don't have CQB limits other 400 fps is the max that you can't go over (in bigger games), if you do, you need to have another gun for the CQB parts... But in regular saturday/sunday games its without limits...
@Revalutionize ROF doesn't matter as much as accuraccy and you get accuracy over a longer range by using heavier bb and to push that you need fps... get smart...
1000 $ gun for cqb is retarded anyway... you can get somethin as reliable and even more accurate for less and keep good ROF aswell... this ROF dumps half your midcap if you tap auto, and if you use semi then whats the point of this anyway...
nice to know however that you called me noob yet your argument is crap...
@Revalutionize not particularly... 30 RPS is the absolute max you should not breach imo... 20-25 is very good already... yes ROF matters but then again it only takes 1 accurate shot to take someone out... its kinda pointless to argue.. 60 fps is like the title says : stupid.
@RtdXyron but if it were me, i would prefer higher rof because i could easily follow up my shots and not give the person a welt the size of a burger. Im reasonable, ok?
@Revalutionize well depends on what you say is reasonable... if you'd go for 60 RPS rather than 600fps then its not even close... its FPS every time... however 30 RPS vs 400 FPS, yes you'd go for RPS however as soon as you have reached your 20-25 rps target you should be going for muzzle speed as otherwise you will be dumping half of your mag with 1 spray that might be retardedly inaccurate.. it all depends on what you find reasonable... and yet again I say that 60 RPS is crazy stupid retarded
@Revalutionize well depends on what you say is reasonable... if you'd go for 60 RPS rather than 600fps then its not even close... its FPS every time... however 30 RPS vs 400 FPS, yes you'd go for RPS however as soon as you have reached your 20-25 rps target you should be going for muzzle speed as otherwise you will be dumping half of your mag with 1 spray that might be retardedly inaccurate.. it all depends on what you find reasonable... and yet again I say that 60 RPS is crazy stupid retarded
@gto3440 yo if your friend is trying to make anything shoot 100rounds per second do not do it with an m4 it will break veryfast the reason for this is the gear boxes on m4 are more spread out and ar not as thick in key areas do it with an AK model gun there gearboxes are one sold piece makeing them much more durable
@DeadTired171 ill let him know...thanks...i personally dont care for aegs...i like my gas powered guns...ive had new aegs disintigrate in my hands...so i switched to gas and i havent had any problems...plus the sound of the motor and gearbox from a aeg just gets on my nerves
@gto3440 ya i know what ya mean i would do the same but i just dont have the cash to buy the gas and definitely not the guns but ya the AK is the way to go dont even try it with the M4 the gear box in the m4 is not solid enough to handle the kind of power the AK style gear box is like 1/4in thicker toward the front and will take much more punishment
@gto3440 ya i know what your saying but i have never owned a gas assault rifle of any sort of gas gun if you dont count the crappy co2 pistols that you can get at stores. i have always bought AEGs i dont know why i buy them i just always have so what would you reccomend and if you have any pros and cons of each that would be nice
@DeadTired171 well king arms has the only m4 that the atf approved so its the only youre safe using at all fields...but besides that...the G&P WOC is good...and if you dont mind the price inokatsu and there is also wa and we which is the basis for most...then for pistols kwa and we
my friend is trying to build a m4 that shoots around 100 per second...i keep telling it isnt possible just yet...maybe in a year or two though...unless he does some crazy voodoo jedi shit to it
$1000 to build it?!?!? I'm calling bs all day you'd have to change EVERY SINGLE PART and leave like the air nozzle left to even get close to that even with all systema parts
@Suprafast44 The only thing stock is the gearbox shell, anti-reverse latch, Magpul bodyand the magpul hand grip. Everything else was purchased from Ehobbyasia, Evike and AirsoftGi. Don't believe me then price each one out yourself.
@ScopeYaHead It is true, I had my spare time and checked. It costs easily over 1k€. I myself as an airsofter, have spent way too much on this hobby... as my current one costs at around 2,5k€. Systema PTW.
oh dear! bring on the jelous haters! lmao Mummy not breast feed you as a child? lmao Grow up numb nuts yer just making yourself look like the CUNT you are :)
@dazlia2 wow dude read it right.. i said you probably have one good fuckin gun.. as in after spending all that money its probably a really good gun. fuckin asshole.
Ok sorry dude lol I missread, my bad :) Well actually i didnt missread it, its just that your message sounded like you were saying "well you only have one gun" lol
@Suprafast44 I can certainly believe $1000. A good set of systema gears cost $100 alone and a motor around $120. Probably more in external work as well. That can get really expensive.
Have you experienced any feeding issues such as air nozzle staying back long enough for bb's to feed? If yes, how did you resolve this issue? Sector chip? Thanks
@parkt1 As for feeding issues, I have not really ran into any other then high caps not feeding fast enough. I have heard G&G high caps feed pretty well but I prefer mid caps anyways.
@parkt1 When I first installed everything, the air nozzle was not going forward fast enough causing a huge air leak and drop in FPS. I sanded down the front of the tappet plate and cut a few coils off the tappet plate spring and it fixed it.
@iamhatedbyteachers I got the gun for $255 and the parts cost me a little over $1,000. I could have just purchased a piston, piston head, spring, gears and motor but I figured I might as well go all out. The only thing left stock was the gearbox shell and magpul body.
@campr723 Sorbothane padding. It is a shock absorbing material. It is usually glued to the inside of the cylinder head and softens the slamming of the piston head to cylinder head. This can make your gun shoot quieter and more reliable.
@chairsofter1911 To be honest I have not stripped one yet. Here is the thing with DSG guns, if not built correctly they will break really fast, like first 100 shots. But if you take your time make sure everything is done correctly it will usually last a while and the average life of a good DSG gun is about 20k rounds. Make sure you do AoE, sorbo pad, swiss cheese the piston, super glue the tooth rack in place and piston head. I some times open and inspect the gun to make sure nothing looks bad.
@chairsofter1911 the downsides to high speed guns are like you said : stripped piston, stripped gears, overheating the motor, wearing out your spring. it basically affects everything in the gearbox. the truth is you dont need a super high speed gun to be effective on the battlefield. get a 6.01mm steel inner barrel, an element hop up, and a G&P m120 motor and your shots are dead accurate at 75ft and shooting roughly 20 bps. all for just under $100
@jtg199 Well since it was originally a stock Magpul it has the magpul grip and metal body. I added a JP Rifles 7.5" front end, Magpul flipup sights, and a G&P Stubby M16 stock. I kept it simple yet aggressive lookiing.
@ScopeYaHead thats fucking sick.... im in love.... but i like gas a little bit more... id probably fry the gun in five minutes lol. ill stick with my ksc glock 19 (I found one of the only remaining plastic slides in perfect condition!)
@ScopeYaHead the gun had a plastic slide with a little scratched up but i serched for 2 months and finally found just about the last slide in amazing condition
@xPrimer13 lol my brother-in-law is Mexican and that is his friend who doesn't speak much English. He is actually more into Airsoft than I am lol. I would say he spends atleast $1,000 a month on Airsoft shit.
I never said it only takes one, nothing about how many times you shoot them. Someone with a single shot and skill will take out can take out a someone without skill shooting 60 RPS. Whats entertaining about watching you shoot your airsoft gun?
@raggie817 Exactly, I play people all the time and mess around and when we go against good people, that is when I switch to my baby, a Magpul M4 that shoots 395 FPS @ 23 RPS. It has the minimum essentials to save weight and is stupid accurate from a custom nub. I am simply stating that each person has their own preferences and opinions. I just hate when people vioce their opinion in a rude way because they have a different perspective. Don't think I am attacking you, I enjoy debates.
@raggie817 This is YouTube. I could have posted up my girlfriends stock Echo 1 M4, but do you think people would have wanted to see it shoot 18 RPS and 270 FPS? This was built for entertainment purposes. Yes it gets to see some action on the field but I use it more to intimidate and entertain people.
@raggie817 And about only hitting someone once. I burst every gun I have. If I burst this gun and it shoots out 10 bbs. At the most 3-5 will hit you and that could be in the vest, helmet, ect. If you cannot take getting hit by a 280 FPS gun 3-5 times, then you shouldn't be playing Airsoft in the first place.
And the money spent is irrelevant because this gun has paid for itself with all the enjoyment my friends and I have received from this gun.
@BladeAirsoft I am using a G&P 614 stock. It looks like a stubby M16 stock but can house huge batteries. I will send you a link to how the gun currently looks with the stock.
@BladeAirsoft Yes it does fit and actually has a bit of wiggle room. I will post another video up hopefully by the end of the week as people are asking quite a bit of questions. I will record the lipo and how much room, if you want.
@RedBuit02 I have mid terms all week, however I will get around to making a video for you hopefully this weekend. Also the base gun was a stock G&P CQB Magpul M4.
@StarskySTARS Im sorry I do not have much experience with gas rifles. I do remember seeing a mod that increased the rate of fire a bit and FPS. Let me see if I can find the link.
@StarskySTARS no, it is not, due to the bolt travel.... take the new WE Ak74u for example vs the GHK AK74... the bolt travel on the we is almost 2/3 longer than the GHK so the ROF is extremely slow...
@StarskySTARS not really, you could not possible have an insane amount of RPS without having a carbon copy of the exact same bolt mechanism and whatnot in order to have high RPS on a gas blowback. But making those internal mods would automatically make your replica illegal in whatever state your in (unles you have a liscense and your state allows automatic firearms to civilians, which probably doesnt apply o any states)
@infuglenn Yeah I might just go with the AEG then. In AEGs it has a purpose, it gives you better trigger response. But I dont think it has the same effect on a GBB if it was possible. However I just want to make something new, a new project^^. But If i get an AEG im definitively getting an RPS boost not super boost but enough to get good trigger response. I dont have much against high rps its a better trend than the high FPS trends xD
@infuglenn the point isnt to be hitting them 60 times, its to be able to pull the trigger and in 1/10th of a second have 6 BBs out. You use these guns in CQB for when you only see someone for a fraction of a second.
@StarskySTARS You can make the ROF faster by shortstroking it (this is done by putting spacers in the way of the bolt). However, this cant be done much, your bolt catch will quit working then, and you cand achieve that high ROF. A light Bolt/Slide helps much, as well as strong gas. I think the max rof you can get out of a GBBR is 20-25 RPS, and then you have to use HPA, because the cool down of gas would make it unusable after 5 shots.
@StarskySTARS no, the gas would have to release very quickly which would cause the mag to get very cold, pretty much all you would get would be a big puff of gas from it all releasing at once. the fastest gbb i've seen have been the kwa mp9's which are no where near that speed.
@Arostyle380 I also updated the description of the video with the parts list. Anything that is not listed is stock G&P such as the anti reverse latch ect.
@SimSuicide Because I can. :) When you have been airsofting for a long time and have a lot of guns, it gets boring doing the same old builds. I built this to see where my tech skills where as a DSG build is one of the hardest ones to do.
Thanks it shoots flawless. I have already passed 25,000 rounds with no issues. And come to find out my chrono was way off because it was chronoing at 380 fps. No that scooter is my nephews, however my cousin is big on scooters. His youtube is MrJordanFilms so you might like his page and videos. Thanks for the support!
........................ wtf??
Zach9898 1 day ago
Did the rate of fire slow down the FPS? Anyways, Nice build!
LoganIsSuperKewl 6 days ago
what kind of handguard is that
taiko729 1 week ago
@suprafast 1 USD = 0.7515 EURO
.7515 x 1000 = 751.50USD
Even less than you claim! ( "$1000")
Lewis5525 1 week ago
Can you post a parts list I would like to build one of these and I it's possible I would like to have 350 fps but I'll be happy at 320. Please feel free to answer me on this account it is a gmail.
TheDudewithskillz 1 week ago
@TheDudewithskillz description you noob
eagle2896E28 1 week ago
Is that an ICS CXP.08
TheDudewithskillz 1 week ago
i can hear spanish words :)
Buditokid 1 week ago
That motors gotta heat up fast...
RebelGamingxxVlog 1 week ago
and the point of that? extremely fast but weak softgun... great...
RtdXyron 1 week ago
@RtdXyron CQB. Most places only allow guns to be 350 FPS and below. Otherwise, you are a noob.
doofusmonkey2 1 week ago
@doofusmonkey2 lol, even for CQB this is retarded... also the sites all over the world are very different... we don't have CQB limits other 400 fps is the max that you can't go over (in bigger games), if you do, you need to have another gun for the CQB parts... But in regular saturday/sunday games its without limits...
RtdXyron 1 week ago
@RtdXyron your a noob. fps doesnt matter as much as rof and accuracy. get smart
Revalutionize 1 week ago
@Revalutionize ROF doesn't matter as much as accuraccy and you get accuracy over a longer range by using heavier bb and to push that you need fps... get smart...
1000 $ gun for cqb is retarded anyway... you can get somethin as reliable and even more accurate for less and keep good ROF aswell... this ROF dumps half your midcap if you tap auto, and if you use semi then whats the point of this anyway...
nice to know however that you called me noob yet your argument is crap...
RtdXyron 1 week ago
@RtdXyron but if you already have achieved accuracy, rof matters more than fps. fps should not be prioritized when you buy upgrades.
Revalutionize 1 week ago
@Revalutionize not particularly... 30 RPS is the absolute max you should not breach imo... 20-25 is very good already... yes ROF matters but then again it only takes 1 accurate shot to take someone out... its kinda pointless to argue.. 60 fps is like the title says : stupid.
RtdXyron 1 week ago
@Revalutionize also as far as reliability goes, high FPS is more reliable than ROF
RtdXyron 1 week ago
@RtdXyron unless the fps is too high, then the internals wear down just as much
Revalutionize 6 days ago
@Revalutionize ofcourse they do but ultra high fps is still more reliable (if only a bit) than ultra high rof
RtdXyron 6 days ago
@RtdXyron but if it were me, i would prefer higher rof because i could easily follow up my shots and not give the person a welt the size of a burger. Im reasonable, ok?
Revalutionize 6 days ago
@Revalutionize well depends on what you say is reasonable... if you'd go for 60 RPS rather than 600fps then its not even close... its FPS every time... however 30 RPS vs 400 FPS, yes you'd go for RPS however as soon as you have reached your 20-25 rps target you should be going for muzzle speed as otherwise you will be dumping half of your mag with 1 spray that might be retardedly inaccurate.. it all depends on what you find reasonable... and yet again I say that 60 RPS is crazy stupid retarded
RtdXyron 6 days ago
This has been flagged as spam show
@Revalutionize well depends on what you say is reasonable... if you'd go for 60 RPS rather than 600fps then its not even close... its FPS every time... however 30 RPS vs 400 FPS, yes you'd go for RPS however as soon as you have reached your 20-25 rps target you should be going for muzzle speed as otherwise you will be dumping half of your mag with 1 spray that might be retardedly inaccurate.. it all depends on what you find reasonable... and yet again I say that 60 RPS is crazy stupid retarded
RtdXyron 6 days ago
lol insta mag dump for a mid cap
12357951 1 week ago
Imagine a gun that fired 10rps faster than that.
Now imagine the projectiles traveling at over 2500fps
Now imagine the projectiles not being bb's, but 30mm High Explosive Armor Piercing rounds that weigh nearly a pound each.
The GAU 8 is a nasty weapon.
RADIOACTIVEBUNY 2 weeks ago
Definitely cooler then it is practical !
AMightyPanda 2 weeks ago
that is amazing!!!!
Skivideoproductions 2 weeks ago
stupid fast?
MrWarPirate 2 weeks ago 2
This has been flagged as spam show
@MrWarPirate
ORSOBRUNO96 2 weeks ago
Change the stock. It's short and fat looking.
banddude121 3 weeks ago
wat
NinjaMoose234 3 weeks ago
@gto3440 yo if your friend is trying to make anything shoot 100rounds per second do not do it with an m4 it will break veryfast the reason for this is the gear boxes on m4 are more spread out and ar not as thick in key areas do it with an AK model gun there gearboxes are one sold piece makeing them much more durable
DeadTired171 3 weeks ago
@DeadTired171 ill let him know...thanks...i personally dont care for aegs...i like my gas powered guns...ive had new aegs disintigrate in my hands...so i switched to gas and i havent had any problems...plus the sound of the motor and gearbox from a aeg just gets on my nerves
gto3440 3 weeks ago
@gto3440 ya i know what ya mean i would do the same but i just dont have the cash to buy the gas and definitely not the guns but ya the AK is the way to go dont even try it with the M4 the gear box in the m4 is not solid enough to handle the kind of power the AK style gear box is like 1/4in thicker toward the front and will take much more punishment
DeadTired171 3 weeks ago
@DeadTired171 the gas is cheap if you use propane instead of green gas
gto3440 3 weeks ago
@gto3440 ya i know what your saying but i have never owned a gas assault rifle of any sort of gas gun if you dont count the crappy co2 pistols that you can get at stores. i have always bought AEGs i dont know why i buy them i just always have so what would you reccomend and if you have any pros and cons of each that would be nice
DeadTired171 2 weeks ago
@DeadTired171 well king arms has the only m4 that the atf approved so its the only youre safe using at all fields...but besides that...the G&P WOC is good...and if you dont mind the price inokatsu and there is also wa and we which is the basis for most...then for pistols kwa and we
gto3440 2 weeks ago
O_o is there a 99999999999 volt battery?
acasha101918 3 weeks ago
no life
yytfreestyler10 3 weeks ago
who queefed??
hcmadman10 3 weeks ago
wire it to deans and get an extra 2-3 round a sec out of it
sparta435 3 weeks ago
kwa vector can go 100 fps O.0
pensyturbine 3 weeks ago
Whats the efective range of this gun, considering that it has 6.01mm barrel and about 300 fps ???
ALEKSABOY 4 weeks ago
my friend is trying to build a m4 that shoots around 100 per second...i keep telling it isnt possible just yet...maybe in a year or two though...unless he does some crazy voodoo jedi shit to it
gto3440 4 weeks ago
@gto3440 Just a proffesional 14,6 Li-Po and some awesome mosfet+motor to cope with the voltage:)
MyrPiotr 3 weeks ago
Thats crazy!!!
M249airsoft 1 month ago
I think its time for a reload...
asgiawesome 1 month ago
$1000 to build it?!?!? I'm calling bs all day you'd have to change EVERY SINGLE PART and leave like the air nozzle left to even get close to that even with all systema parts
Suprafast44 1 month ago
@Suprafast44 The only thing stock is the gearbox shell, anti-reverse latch, Magpul bodyand the magpul hand grip. Everything else was purchased from Ehobbyasia, Evike and AirsoftGi. Don't believe me then price each one out yourself.
ScopeYaHead 1 month ago
@ScopeYaHead It is true, I had my spare time and checked. It costs easily over 1k€. I myself as an airsofter, have spent way too much on this hobby... as my current one costs at around 2,5k€. Systema PTW.
haronasi 1 month ago
@haronasi Thank you for actually taking your time and calculating the cost rather then assuming.
ScopeYaHead 1 month ago
@haronasi there is no such thing as putting too much money into any gun hobby...lol
gto3440 4 weeks ago
@haronasi hey. you probly got one good fucking gun tho.
BlackClover420 5 days ago
@BlackClover420 A systema PTW.
haronasi 5 days ago
@BlackClover420
oh dear! bring on the jelous haters! lmao Mummy not breast feed you as a child? lmao Grow up numb nuts yer just making yourself look like the CUNT you are :)
dazlia2 5 days ago
@dazlia2 wow dude read it right.. i said you probably have one good fuckin gun.. as in after spending all that money its probably a really good gun. fuckin asshole.
BlackClover420 4 days ago
@BlackClover420
Ok sorry dude lol I missread, my bad :) Well actually i didnt missread it, its just that your message sounded like you were saying "well you only have one gun" lol
dazlia2 4 days ago
@ScopeYaHead Yep, It is true as anouther said. Im doing a custom build from the ground up and Im at $1500.
montymonster 1 month ago
@Suprafast44 I can certainly believe $1000. A good set of systema gears cost $100 alone and a motor around $120. Probably more in external work as well. That can get really expensive.
DeathShepardAirsoft 1 month ago
@Suprafast44 You are an idiot.
BladeAirsoft 2 days ago
@Suprafast44 Have you ever modified your gun before?
xXL3GITAMACYXx1 2 days ago
the whole thing just sounds like its farting
TheWhole9Yards1001 1 month ago
anyone else here a guy say oww at 0:20?
DoYouLikeMyName99999 1 month ago
i like how you have a tiny mag on your gun in the picture haha youd empty that in half a second
evanblake47 2 months ago 2
@evanblake47 That is the mag I am using in the clip. It is a mid cap and holds 120 rounds. I usually run around with 8 of them lol.
ScopeYaHead 2 months ago 4
@ScopeYaHead which will last you all of 16 seconds. ps im good at math teehee
kellycolburn1 3 weeks ago
Have you experienced any feeding issues such as air nozzle staying back long enough for bb's to feed? If yes, how did you resolve this issue? Sector chip? Thanks
parkt1 2 months ago
@parkt 1 Thats air nozzle NOT staying back long enough. Sorry..................lol
parkt1 2 months ago
@parkt1 As for feeding issues, I have not really ran into any other then high caps not feeding fast enough. I have heard G&G high caps feed pretty well but I prefer mid caps anyways.
ScopeYaHead 2 months ago
@parkt1 When I first installed everything, the air nozzle was not going forward fast enough causing a huge air leak and drop in FPS. I sanded down the front of the tappet plate and cut a few coils off the tappet plate spring and it fixed it.
ScopeYaHead 2 months ago
your going to brake your gear box
h2oman99 2 months ago
SOME ONE NEEDS A DRUM MAG!!!
theblind1s 2 months ago
The parts you are using....
Did you purposely create an air leak so it could stay low fps with an sp110 to prevent PE?
GravitysGame 2 months ago
@GravitysGame Yes, it was chronoing at 380 fps before.
ScopeYaHead 2 months ago
This is really cool but not practical lol. I think around 25-30 bps is the equilibrium if you must have high speed.
RJHPAirsoft 2 months ago
This is a great thing to use against those people who don't call their hits. Try lying when you get bombarded with a bag a of bb's hitting you! :V
aopdjasldksa 2 months ago 6
60 rounds/s * 60 s/minute = 3600 RPM.
A minigun would have an RPM of 2000 to 4000.
dongimin2 2 months ago
U dont have to answer but how much was it to build?
iamhatedbyteachers 2 months ago
@iamhatedbyteachers I got the gun for $255 and the parts cost me a little over $1,000. I could have just purchased a piston, piston head, spring, gears and motor but I figured I might as well go all out. The only thing left stock was the gearbox shell and magpul body.
ScopeYaHead 2 months ago
where did u put the no skill required sticker ?
isawul00k 3 months ago
@isawul00k I lent it to kids like you who assume things they do not know.
ScopeYaHead 3 months ago 5
Give me a sitrep! bumbumbmumbumbmumbmmumbmumbmumbmuu
FluffyCatDogs 3 months ago
Lol I use 70rd midcaps! (Sometimes 190rd for pwnage.)
TheAnonymoususer5 3 months ago
did you film this in osama bin ladens bunker?
willcitoman97 3 months ago
What exactly is a sorbo pad?
campr723 3 months ago
@campr723 Sorbothane padding. It is a shock absorbing material. It is usually glued to the inside of the cylinder head and softens the slamming of the piston head to cylinder head. This can make your gun shoot quieter and more reliable.
ScopeYaHead 3 months ago
@ScopeYaHead your gun sounds like a nascar team X-)
bklacc1 3 months ago
@bklacc1 I mean barber after 3rd view.
bklacc1 3 months ago
haha nice, damn, deadly.
MrBruce1337 3 months ago
it sounds just like my computer.
ScanianSwede 3 months ago
@ScanianSwede sounds like u need a new computer
Derewb25 2 months ago
Who farted?
InfinitePhasesFilms 3 months ago
press the trigger for 2 seconds and there goes your 120 round mid cap.
paulgnc24 4 months ago 3
you could turn this into an air compressor.
ryandonian 4 months ago
.........enough said
deathangelsairsoft1 4 months ago
my buddy has a trigger finger in airsoft in semi auto he fires 56 bbs per second with 1 finger
meany1023 4 months ago
sounds like a fucking minigun
Maraud3r43 4 months ago
how many pistons have you stripped? I want to make a high speed gun, and I need to know what are the risks, besides breaking pistons.
chairsofter1911 4 months ago
@chairsofter1911 To be honest I have not stripped one yet. Here is the thing with DSG guns, if not built correctly they will break really fast, like first 100 shots. But if you take your time make sure everything is done correctly it will usually last a while and the average life of a good DSG gun is about 20k rounds. Make sure you do AoE, sorbo pad, swiss cheese the piston, super glue the tooth rack in place and piston head. I some times open and inspect the gun to make sure nothing looks bad.
ScopeYaHead 4 months ago
@ScopeYaHead throw a Tightbore in there and have it at atleast 300FPS
Blackhorseairsoft1 3 months ago
@Blackhorseairsoft1 That's clearly not the point, nor are you capable of reading the description.
csmybuttt 3 months ago
@chairsofter1911 get a good piston such as an SHS full tooth one and make sure your AOE is perfect and youll be fine.
DUDESKIN118 4 months ago
@chairsofter1911 the downsides to high speed guns are like you said : stripped piston, stripped gears, overheating the motor, wearing out your spring. it basically affects everything in the gearbox. the truth is you dont need a super high speed gun to be effective on the battlefield. get a 6.01mm steel inner barrel, an element hop up, and a G&P m120 motor and your shots are dead accurate at 75ft and shooting roughly 20 bps. all for just under $100
TeamIMPACTops 3 months ago
what external upgrades that got...?
jtg199 4 months ago
@jtg199 Well since it was originally a stock Magpul it has the magpul grip and metal body. I added a JP Rifles 7.5" front end, Magpul flipup sights, and a G&P Stubby M16 stock. I kept it simple yet aggressive lookiing.
ScopeYaHead 4 months ago
@ScopeYaHead could you show more of the gun....
jtg199 4 months ago
@jtg199 I posted a link in the description of how the gun looks. I actually added a flat clear coat so the color is almost perfect now.
ScopeYaHead 4 months ago
@ScopeYaHead thats fucking sick.... im in love.... but i like gas a little bit more... id probably fry the gun in five minutes lol. ill stick with my ksc glock 19 (I found one of the only remaining plastic slides in perfect condition!)
jtg199 4 months ago
@ScopeYaHead the gun had a plastic slide with a little scratched up but i serched for 2 months and finally found just about the last slide in amazing condition
jtg199 4 months ago
are you in a mexican hut?
xPrimer13 4 months ago
@xPrimer13 lol my brother-in-law is Mexican and that is his friend who doesn't speak much English. He is actually more into Airsoft than I am lol. I would say he spends atleast $1,000 a month on Airsoft shit.
ScopeYaHead 4 months ago
I never said it only takes one, nothing about how many times you shoot them. Someone with a single shot and skill will take out can take out a someone without skill shooting 60 RPS. Whats entertaining about watching you shoot your airsoft gun?
raggie817 5 months ago
@raggie817 Exactly, I play people all the time and mess around and when we go against good people, that is when I switch to my baby, a Magpul M4 that shoots 395 FPS @ 23 RPS. It has the minimum essentials to save weight and is stupid accurate from a custom nub. I am simply stating that each person has their own preferences and opinions. I just hate when people vioce their opinion in a rude way because they have a different perspective. Don't think I am attacking you, I enjoy debates.
ScopeYaHead 5 months ago 12
Congratulations you can can spend 3 times as much money as me. IT ONLY TAKES 1.
raggie817 5 months ago
@raggie817 This is YouTube. I could have posted up my girlfriends stock Echo 1 M4, but do you think people would have wanted to see it shoot 18 RPS and 270 FPS? This was built for entertainment purposes. Yes it gets to see some action on the field but I use it more to intimidate and entertain people.
ScopeYaHead 5 months ago
@raggie817 And about only hitting someone once. I burst every gun I have. If I burst this gun and it shoots out 10 bbs. At the most 3-5 will hit you and that could be in the vest, helmet, ect. If you cannot take getting hit by a 280 FPS gun 3-5 times, then you shouldn't be playing Airsoft in the first place.
And the money spent is irrelevant because this gun has paid for itself with all the enjoyment my friends and I have received from this gun.
ScopeYaHead 5 months ago
how?
KUYApvtryan 5 months ago
Does that lipo fit in the stock?
BladeAirsoft 5 months ago
@BladeAirsoft I am using a G&P 614 stock. It looks like a stubby M16 stock but can house huge batteries. I will send you a link to how the gun currently looks with the stock.
ScopeYaHead 5 months ago
@ScopeYaHead
I know, I'm putting the same stock on my high speed build which is why I asked, does the lipo you're using fit in it?
BladeAirsoft 5 months ago
@BladeAirsoft Yes it does fit and actually has a bit of wiggle room. I will post another video up hopefully by the end of the week as people are asking quite a bit of questions. I will record the lipo and how much room, if you want.
ScopeYaHead 5 months ago
@ScopeYaHead
Nope just needed to know it would :P thanks!
BladeAirsoft 4 months ago
@ScopeYaHead can you make a video showing the gun and that stuff, also what was your base gun?
RedBuit02 5 months ago
@RedBuit02 I have mid terms all week, however I will get around to making a video for you hopefully this weekend. Also the base gun was a stock G&P CQB Magpul M4.
ScopeYaHead 5 months ago
Foooook!!!!
Need2airsoft 5 months ago
Is it possible to get insane RPS on gas rifles/pdw's? Maybe not 60s but high.
StarskySTARS 5 months ago
@StarskySTARS Im sorry I do not have much experience with gas rifles. I do remember seeing a mod that increased the rate of fire a bit and FPS. Let me see if I can find the link.
ScopeYaHead 5 months ago
@ScopeYaHead Oh thanks that would be really helpful! I dont have a GBB yet but I really want to get the GBB KAC PDW and totally pimp it up :P
StarskySTARS 5 months ago
@StarskySTARS no, it is not, due to the bolt travel.... take the new WE Ak74u for example vs the GHK AK74... the bolt travel on the we is almost 2/3 longer than the GHK so the ROF is extremely slow...
AsianJewAirsofter 5 months ago
@StarskySTARS not really, you could not possible have an insane amount of RPS without having a carbon copy of the exact same bolt mechanism and whatnot in order to have high RPS on a gas blowback. But making those internal mods would automatically make your replica illegal in whatever state your in (unles you have a liscense and your state allows automatic firearms to civilians, which probably doesnt apply o any states)
TheSympathize 5 months ago
@StarskySTARS
i have a gbb mp7 and it shoots around 20rps i think for an gbb thats rly fast
but if u want a high rof on an gbb buy a mp7/mp9 or uzi those are the fastest i know but for an standart m4 forget about it
u want high rof buy aeg but an high rof is useless in my opinion i dont know why people like an high rof but yea
infuglenn 5 months ago
@infuglenn Yeah I might just go with the AEG then. In AEGs it has a purpose, it gives you better trigger response. But I dont think it has the same effect on a GBB if it was possible. However I just want to make something new, a new project^^. But If i get an AEG im definitively getting an RPS boost not super boost but enough to get good trigger response. I dont have much against high rps its a better trend than the high FPS trends xD
StarskySTARS 5 months ago
@StarskySTARS
indeed with a gbb the hammer needs to reset
rps ok but this is rediculous its awesome but totally useless xd
if u need 60 bbs to hit someone then ure just bad xd btw the person who you shoot at wouldnt like to be hit 60 times in a second xd
infuglenn 5 months ago
@infuglenn the point isnt to be hitting them 60 times, its to be able to pull the trigger and in 1/10th of a second have 6 BBs out. You use these guns in CQB for when you only see someone for a fraction of a second.
liquidice129 5 months ago
@liquidice129 Exactly. The trigger response on this gun is stupid fast.
ScopeYaHead 5 months ago
@StarskySTARS You can make the ROF faster by shortstroking it (this is done by putting spacers in the way of the bolt). However, this cant be done much, your bolt catch will quit working then, and you cand achieve that high ROF. A light Bolt/Slide helps much, as well as strong gas. I think the max rof you can get out of a GBBR is 20-25 RPS, and then you have to use HPA, because the cool down of gas would make it unusable after 5 shots.
SaitekFreak999 5 months ago
@StarskySTARS yea especially on an m4a1
911airsoftdude 5 months ago
@StarskySTARS no, the gas would have to release very quickly which would cause the mag to get very cold, pretty much all you would get would be a big puff of gas from it all releasing at once. the fastest gbb i've seen have been the kwa mp9's which are no where near that speed.
HeroicCouplet37 5 months ago
@StarskySTARS not with GBBR's. I got a polarstar that runs off of hpa and can get 45.
hioncheesenips 5 months ago
Wtf
Jwats96 5 months ago
Could you please post what type of internals you're running on that bad boy?
moffe247 5 months ago
@moffe247 I will send you a message with the details as it is too long to list.
ScopeYaHead 5 months ago
BB hose. I like it.
BadYellowSRT 5 months ago
Incase your wondering why your all of a sudden getting a load of views. Its cos of redwolfairsoft posted your vid on their FB page...
Arostyle380 5 months ago
@Arostyle380 haha yeah my phone was going crazy from my email notifications lol.
ScopeYaHead 5 months ago
@Arostyle380 I also updated the description of the video with the parts list. Anything that is not listed is stock G&P such as the anti reverse latch ect.
ScopeYaHead 5 months ago
I want one!! I'd like to feature this video in next week's episode of our YT Airsoft show if you are ok with it. Thanks!
TheMAKOTeam 6 months ago
@TheMAKOTeam Yes that is totally fine. I can give you a part list as well if yo would like. Just please give me credit for the build is all I ask.
ScopeYaHead 6 months ago
@ScopeYaHead You will definitely get the credit. I do NOT have the kind of tech skills that I'm sure are required. A part list would be cool too!
TheMAKOTeam 6 months ago
why?!
SimSuicide 6 months ago
@SimSuicide Because I can. :) When you have been airsofting for a long time and have a lot of guns, it gets boring doing the same old builds. I built this to see where my tech skills where as a DSG build is one of the hardest ones to do.
ScopeYaHead 6 months ago
stop farting
tomernechmad1997 6 months ago
@tomernechmad1997 LMAO only if my farts sounded as smooth!
ScopeYaHead 6 months ago 9
Thanks it shoots flawless. I have already passed 25,000 rounds with no issues. And come to find out my chrono was way off because it was chronoing at 380 fps. No that scooter is my nephews, however my cousin is big on scooters. His youtube is MrJordanFilms so you might like his page and videos. Thanks for the support!
ScopeYaHead 6 months ago
nice bro, sounds smooth as hell. btw i noticed a scooter, you trick?
HotPocketAirsoft 6 months ago
Comment removed
ezra161020 7 months ago