You do realize any old light fixture lets out emfs too. Infact old copper wiring will let off huge amounts of emfs. Which creates paranoia in a person. Among other things..
Remember. Anything old an electrical releases emfs. So first thing to do. Call an electrician to scan the house for the dangerous rates with his own emf reader. If you're still paranoid. Figured out which reader he uses and buy that brand. Probably cost around 30-40 dollars but hey. w.e
You think you are being watched? That they try to hit you with some sort of radio waves? If that's the case, you seriously need help man - no offense. If they would want you gone they would have removed you a long time ago along with this video.
i would have thought the same thing too if not for personal exposure. i have equipment and am registering the phenomenon constantly. so, unless it is my body doing this...
take it from me there are good reasons why it has to happen this way in a city of countless violent murders...
just moved into a new appartment and for the first time in my life I registered 30 milligauss around my bed. you could not get such high readings if you stood next to a train engine/motor.
I use a gauss meter to measures static EMF (Electromagnetic Frequency) in the 50-60 MHz range that household appliances emit. The maximum that an old cathode-ray tube television emits is 5 milligauss. A microwave oven also produces about as much EMF so you can imagine I am not making things up if the same device gives me a 30 milligauss reading in a scenario where there are no appliances around.
I also use a Frequency Counter that shows the exact frequency as well as the signal strength.
Since they are coming from the bed, is it possible it's the apartment below or above the bed? Does the bed have any metal in it? Maybe the metal is unfortunate to have some sort of radiation in it? I know that granite that is used in kitchen benches, flooring etc. (rarely) comes with a higher dose of Uranium. I don't know if radioactive energy would make the EMF reader go berserk but it's worth a check!
I always place an aluminum shield between the matras and bed, in the bedding, plus there is metal in the matras. if the high reading was coming from any of these metals it would be constant. as things are, it flares up when I am more or less asleep. when I feel the heat and turn a detector on, it goes out after a few seconds. when i just moved in the readings were off the chart. the techie got smart. fortunately, I already made video recordings on day 1 so he/she is wasting their time.
the device I used in my most recent clip is a Cell-Sensor. It detects both Static EMF and dynamic GSM frequencies. In that clip, it was detecting a GSM frequency at a signal strength of +10 milliwatt/cm2.
How do I know it is GSM and not static EMF? All I need to do is move the dongle around or detach it. If the reading remains the same then the signal is dynamic. In that clip, I set the mode to Normal. Very few devices have the capacity to sustain such wattage over long distances.
microphones are easy to find. they transmit signals. there aren't that many channels to use, and a cheap RF Detector suffices for the task. what is happening on a grand scale is the use of advanced technology to watch, attack and eavesdrop on targets in their own homes. the perps stop all this when they know you have a good detector because you will know where they are. much of the battle is transfered to sleep time and the streets. too many perps have DEW's. they are everywhere in UK cities.
New homes may have mics in them. It would be easy to do. Cars might have them as well. I'd be careful what U say today. Maybe use codes only U know so some stupid eavesdropper cant use what you say. There are private people with access to spy stuff as well as big bro.
How is this spying. I dunno but usually don't spies listen in on you instead of flooding you with RF. That's like listening in on a conversation by blasting a boom box into their window. Maybe you should calm down with the illegal activities or go underground for a while if you think you're being watched. Where did you track the signals to anyway?
they are not spying on me in the classic sense. they need me in their sights to do any kind of surgical harm with DEW that can pass for natural causes. remember here that I am defending myself. they need to work harder at it, increase power and it becomes obvious. they are also researching i.e. the effects of various DEW assaults, etc. the knowledge they gain here will be applied to other ops.
my activism makes me game in this system, and i am on the menu. alone, isolated, anything goes.
i do not think there was any device in the room, apart from the telly and laptop screen generating static ELF, that could have been interfering with the reception in this way. can a cell antenna pick up static ELF? remember also that the signal strength indicator moved up and down in tandem with my movements. for example, the coverage indicator beep would almost always go off when i went under the secondary conducting layer cover around my bed, indicating a delberate change in signal strength.
i was using Hutchinson 3G at the time, and their 3G transmissions were at 2100 mhz (close to microwave oven frequency at 2400 Mhz), while the packet GSM was 2G broadcasting at 900 Mhz. i was not getting much GSM reception in the cage, and 3G was completely out, but the GSM reception indicator on the phone would be at full (1). my conclusion: they were using a signal in the 900 Mhz region because, at high power settings, it penetrates the shield.
My initial theory to why your GSM and 3G's receptions are quite leveled (say 0,7 and 0,7) normally and whilst in a sort of Faraday cage are 1 and 0 (1 being max) is: the 3G might actually produce noise affecting the GSM even though they are different frequencies or channels. In the cage, the frequency of 3G is blocked, whereas the GSM penetrates, for reasons unknown. What is more likely however is that there is a lot of background EM noise that affects your GSM. Still, unexplained penetration.
it's a 3G NEC phone, one of them old ones. the disturbance is not related to any known defects with this make. the same thing happens with all my phones.
when i leave the coverage alert tone on, it goes on and off according to my activities, whether or not the phone is moved around or not. if i creap under the secondary protective layers of conducting material shielding, leaving the phone on the bedside table, the coverage goes off.
the spying equipment is using signals in the same range as the phone, and since the GSM mast's signal is weaker, it is getting drowned out.
the phone will not lie about coverage. it either shows clearly that you are well covered, or having poor reception. my GSM phones show very high coverage within the faraday cage, even when jthey are actually disconnected, meaning I cannot make any calls.
"Some homework for you: why do you think they are this blatant with me?"
They don't care what you know as long as some else does not corroborate what you are going through. I am convinced that most organized stalkers are freemasons and they are mobilizing their grudge campaigns around the world. Exactly the same thing is happening to me in the UK. These people are murderers.
It is possible you are TARGETED. google targeted individual. I know because I am targeted.
timothytrespas 1 month ago
I can hear it
returnoftheramble3 1 year ago
ITS NORMALLY THE APARTMENT ABOVE!
ladypinv2010 1 year ago
You do realize any old light fixture lets out emfs too. Infact old copper wiring will let off huge amounts of emfs. Which creates paranoia in a person. Among other things..
Remember. Anything old an electrical releases emfs. So first thing to do. Call an electrician to scan the house for the dangerous rates with his own emf reader. If you're still paranoid. Figured out which reader he uses and buy that brand. Probably cost around 30-40 dollars but hey. w.e
suzukixi 2 years ago
FREAK
luis007008 2 years ago
You think you are being watched? That they try to hit you with some sort of radio waves? If that's the case, you seriously need help man - no offense. If they would want you gone they would have removed you a long time ago along with this video.
icebice 2 years ago
i would have thought the same thing too if not for personal exposure. i have equipment and am registering the phenomenon constantly. so, unless it is my body doing this...
take it from me there are good reasons why it has to happen this way in a city of countless violent murders...
just moved into a new appartment and for the first time in my life I registered 30 milligauss around my bed. you could not get such high readings if you stood next to a train engine/motor.
Toloane 2 years ago
This device of yours, what brand and model is it and what does it measure?
icebice 2 years ago
I use a gauss meter to measures static EMF (Electromagnetic Frequency) in the 50-60 MHz range that household appliances emit. The maximum that an old cathode-ray tube television emits is 5 milligauss. A microwave oven also produces about as much EMF so you can imagine I am not making things up if the same device gives me a 30 milligauss reading in a scenario where there are no appliances around.
I also use a Frequency Counter that shows the exact frequency as well as the signal strength.
Toloane 2 years ago
Since they are coming from the bed, is it possible it's the apartment below or above the bed? Does the bed have any metal in it? Maybe the metal is unfortunate to have some sort of radiation in it? I know that granite that is used in kitchen benches, flooring etc. (rarely) comes with a higher dose of Uranium. I don't know if radioactive energy would make the EMF reader go berserk but it's worth a check!
icebice 2 years ago
I always place an aluminum shield between the matras and bed, in the bedding, plus there is metal in the matras. if the high reading was coming from any of these metals it would be constant. as things are, it flares up when I am more or less asleep. when I feel the heat and turn a detector on, it goes out after a few seconds. when i just moved in the readings were off the chart. the techie got smart. fortunately, I already made video recordings on day 1 so he/she is wasting their time.
Toloane 2 years ago
the device I used in my most recent clip is a Cell-Sensor. It detects both Static EMF and dynamic GSM frequencies. In that clip, it was detecting a GSM frequency at a signal strength of +10 milliwatt/cm2.
How do I know it is GSM and not static EMF? All I need to do is move the dongle around or detach it. If the reading remains the same then the signal is dynamic. In that clip, I set the mode to Normal. Very few devices have the capacity to sustain such wattage over long distances.
Toloane 2 years ago
i herd those noises before......
DonStrauss 2 years ago
microphones are easy to find. they transmit signals. there aren't that many channels to use, and a cheap RF Detector suffices for the task. what is happening on a grand scale is the use of advanced technology to watch, attack and eavesdrop on targets in their own homes. the perps stop all this when they know you have a good detector because you will know where they are. much of the battle is transfered to sleep time and the streets. too many perps have DEW's. they are everywhere in UK cities.
Toloane 3 years ago
New homes may have mics in them. It would be easy to do. Cars might have them as well. I'd be careful what U say today. Maybe use codes only U know so some stupid eavesdropper cant use what you say. There are private people with access to spy stuff as well as big bro.
Zobor111 3 years ago
How is this spying. I dunno but usually don't spies listen in on you instead of flooding you with RF. That's like listening in on a conversation by blasting a boom box into their window. Maybe you should calm down with the illegal activities or go underground for a while if you think you're being watched. Where did you track the signals to anyway?
BigBananaMan 3 years ago
they are not spying on me in the classic sense. they need me in their sights to do any kind of surgical harm with DEW that can pass for natural causes. remember here that I am defending myself. they need to work harder at it, increase power and it becomes obvious. they are also researching i.e. the effects of various DEW assaults, etc. the knowledge they gain here will be applied to other ops.
my activism makes me game in this system, and i am on the menu. alone, isolated, anything goes.
Toloane 3 years ago
i do not think there was any device in the room, apart from the telly and laptop screen generating static ELF, that could have been interfering with the reception in this way. can a cell antenna pick up static ELF? remember also that the signal strength indicator moved up and down in tandem with my movements. for example, the coverage indicator beep would almost always go off when i went under the secondary conducting layer cover around my bed, indicating a delberate change in signal strength.
Toloane 3 years ago
i was using Hutchinson 3G at the time, and their 3G transmissions were at 2100 mhz (close to microwave oven frequency at 2400 Mhz), while the packet GSM was 2G broadcasting at 900 Mhz. i was not getting much GSM reception in the cage, and 3G was completely out, but the GSM reception indicator on the phone would be at full (1). my conclusion: they were using a signal in the 900 Mhz region because, at high power settings, it penetrates the shield.
Toloane 3 years ago
My initial theory to why your GSM and 3G's receptions are quite leveled (say 0,7 and 0,7) normally and whilst in a sort of Faraday cage are 1 and 0 (1 being max) is: the 3G might actually produce noise affecting the GSM even though they are different frequencies or channels. In the cage, the frequency of 3G is blocked, whereas the GSM penetrates, for reasons unknown. What is more likely however is that there is a lot of background EM noise that affects your GSM. Still, unexplained penetration.
hreutz 3 years ago
you guys are crazy
firetiger6 3 years ago
what kind of phone is it
crazylemon101 4 years ago
it's a 3G NEC phone, one of them old ones. the disturbance is not related to any known defects with this make. the same thing happens with all my phones.
when i leave the coverage alert tone on, it goes on and off according to my activities, whether or not the phone is moved around or not. if i creap under the secondary protective layers of conducting material shielding, leaving the phone on the bedside table, the coverage goes off.
Toloane 4 years ago
the spying equipment is using signals in the same range as the phone, and since the GSM mast's signal is weaker, it is getting drowned out.
the phone will not lie about coverage. it either shows clearly that you are well covered, or having poor reception. my GSM phones show very high coverage within the faraday cage, even when jthey are actually disconnected, meaning I cannot make any calls.
Toloane 4 years ago
i should actually say "showed", because i am no longer living in the flat.
Toloane 4 years ago
This is happening to me as well....they are evil. They have listening devices outside our home. They are gangstalking me and god know what else......
victim7777 4 years ago
"Some homework for you: why do you think they are this blatant with me?"
They don't care what you know as long as some else does not corroborate what you are going through. I am convinced that most organized stalkers are freemasons and they are mobilizing their grudge campaigns around the world. Exactly the same thing is happening to me in the UK. These people are murderers.
mylilhumpster 4 years ago