Can you give us some info like boil time for 2 cups of water and if you made some other types of wick stoves, I have seen some with 2 and four wicks, and they should boil quicker :)
Thanks for any info as I am going to build one to test, but I will use a scew top can of some sort, no JB weld needed and easier to replace the wick :)
excellent mini stove and it does not take up that much space besides being disposable should you desire. I am going to give it a try maybe in the bush itself from whats on the side of the trail to my camp.
I'd be interested to hear (or read) this stove compared and contrasted with the bud light bottle stove. I know wick stoves are supposed to be easier to use in extreme cold, but I've used a bottle stove down to -15F, no troubles.
Yep. Look near the ducting and fireplace maintenance section. The rope is typically used as the seal around the glass door those fancy fireplace/blower units that fit inside a normal brick fireplace.
this appears to be a very inefficient stove. the flame is concentrated to only the very center of the cooking surface. a jet style with ports all around the upper sides is much more efficient. but hey, to each his own. it was a good instructional video.
It's not inefficient, on the contrary! It's slower, yes, but wick stoves are more fuel efficient than jet stoves. They are also better in the cold when it can be hard to get a jet stove to "bloom".
I see you used a gutter guard for your pot stand, I would like to point out that you can also get expanded metal such as that from an old air filter from you car or truck which has been flattened. I find it to be a bit more stable and less likely to tear up the inside of a pot if that is where you store your pot stand.
I'm pretty much totally new to backpacking/hiking and/or camping, but I was wondering which you would recommend to use on a short camping trip: a wick stove like this, or one more like your ultra-light alcohol stove.
The water is to act as a coolant for the alcohol inside the stove. If that alcohol boils, then the gases shoot out of the wick holes and nulifiy the point of having a wick (to control the temperature of the burn)
This comment has received too many negative votesshow
Nice wick. Nice pot stand. However, easy and great don't necessarily go together. This is a sloppy stove build. Not good if you really want to help people build good stoves.
On this stove, there is no reason to slit the top half. Lot's of people have found more elegant ways to assemble these.
Also, your stoves are poor copies of existing designs and you don't credit the designers (minibulldesign and previous white box).
I use MBD stoves and it is interesting that a lot of stove builders seem to be going over to wicks. One question, how easy is it to fill with fuel? you dont put any other 'filling hole' in the top, so you seem to be just relying on what the wicks will pass through.
It is a thick wick however so that might allow enough fuel through
sorry but that is so sloppy why not clean it up and add the epoxy to the inside of the stove so when you assemble it together it will seal and it will be hidden and cleaner , also a smaller wick kevlar type would work best longer burn time and simmer time. over all great idea even though it has already been done but good video
Can you give us some info like boil time for 2 cups of water and if you made some other types of wick stoves, I have seen some with 2 and four wicks, and they should boil quicker :)
Thanks for any info as I am going to build one to test, but I will use a scew top can of some sort, no JB weld needed and easier to replace the wick :)
Cheers.
paulpm1974 2 months ago
I think I posted a vid of the stove stand I use.
You make great vids
MisterSoul99 8 months ago
i found out if you wet your finger go round your jb weld it make it smooth
RJBURG 11 months ago
Look at the Argau Stovetop Toaster Mini Griller the perfect accessory for outdoor people
MsToasterlady 1 year ago
excellent mini stove and it does not take up that much space besides being disposable should you desire. I am going to give it a try maybe in the bush itself from whats on the side of the trail to my camp.
fatbob1950 1 year ago
I'd be interested to hear (or read) this stove compared and contrasted with the bud light bottle stove. I know wick stoves are supposed to be easier to use in extreme cold, but I've used a bottle stove down to -15F, no troubles.
shad0h027 2 years ago
good one
you would like MrBillTroop73 unican stove
for simple construction and fail safe use.
I built one It is a wickless wick stove, capillary rim stove. no glue, 5min project.
thanks
badphobar 2 years ago
Can anyone tell me under what isle is the fiberglass wick/rope is found in?
@ home depot.... or Lowes w/e
I've been looking it up on the sites to see if they have it on the sites but i cant find it so if u know where it is then lemme know.
466267 2 years ago
camping
romeoneverdies 2 years ago
appliance. He said it is the insulator for around the glass on stoves or ovens.
irishguy80 2 years ago
Yep. Look near the ducting and fireplace maintenance section. The rope is typically used as the seal around the glass door those fancy fireplace/blower units that fit inside a normal brick fireplace.
GNBrews 2 years ago
if u get some.....let me know....my country doesnt have alot of things.....
quaiboi 2 years ago
this appears to be a very inefficient stove. the flame is concentrated to only the very center of the cooking surface. a jet style with ports all around the upper sides is much more efficient. but hey, to each his own. it was a good instructional video.
idahochas 2 years ago
It's not inefficient, on the contrary! It's slower, yes, but wick stoves are more fuel efficient than jet stoves. They are also better in the cold when it can be hard to get a jet stove to "bloom".
georgkrohg 2 years ago
i have a problem with this tove i made it just like this video and the fuel leaks out to bottom
fryguy2513 2 years ago
u probably cut it too much on the top of the can when u put it together there was a small hole?
1:99
466267 2 years ago
my mistake....it was 2:59
466267 2 years ago
also for the wick...
can u use an old shoe lace for the wick?
466267 3 years ago
yeah, but it will last a fraction of the time
GeorgeBushenstein 3 years ago
can we use soda cans to make the stove?
466267 3 years ago
i like your reason for using the apple juice can! ^_^
i love your videos and how to's
ryman3894 3 years ago
Can you use any type of epoxy resin?
madders280392 3 years ago
just use jb weld its only 4 bucks.
bowhunterhall93 2 years ago
curious, do you let it burn out of fuel? How would you pack the stove with fuel inside. Or is the key to only fill it with enough fuel for your task?
beast12101 3 years ago
you just fill it with enough fuel that u need
bowhunterhall93 2 years ago
nasty stuff of you finger yea, that two comp stuff is not very healthy you know !
Dreamlgider 3 years ago
what can you use for fuel could you use white spirit or spirit like vodka etc wb soon please
flyfisher2k8 3 years ago
I see you used a gutter guard for your pot stand, I would like to point out that you can also get expanded metal such as that from an old air filter from you car or truck which has been flattened. I find it to be a bit more stable and less likely to tear up the inside of a pot if that is where you store your pot stand.
NCHiker1970 3 years ago
I'm pretty much totally new to backpacking/hiking and/or camping, but I was wondering which you would recommend to use on a short camping trip: a wick stove like this, or one more like your ultra-light alcohol stove.
Thanks :)
MadFerr3t 3 years ago 2
what is the water for?
peaset89 4 years ago
The water is to act as a coolant for the alcohol inside the stove. If that alcohol boils, then the gases shoot out of the wick holes and nulifiy the point of having a wick (to control the temperature of the burn)
WeekendAdventurer 4 years ago
This comment has received too many negative votes show
Nice wick. Nice pot stand. However, easy and great don't necessarily go together. This is a sloppy stove build. Not good if you really want to help people build good stoves.
On this stove, there is no reason to slit the top half. Lot's of people have found more elegant ways to assemble these.
Also, your stoves are poor copies of existing designs and you don't credit the designers (minibulldesign and previous white box).
DaddyMnM 4 years ago
Nice vid. Thanks for taking the time to do.
I use MBD stoves and it is interesting that a lot of stove builders seem to be going over to wicks. One question, how easy is it to fill with fuel? you dont put any other 'filling hole' in the top, so you seem to be just relying on what the wicks will pass through.
It is a thick wick however so that might allow enough fuel through
Again thabk you for the vid.
Alan
salan3 4 years ago
It fills up slowly. The good thing is that it doesn't need much fuel.
WeekendAdventurer 4 years ago
sorry but that is so sloppy why not clean it up and add the epoxy to the inside of the stove so when you assemble it together it will seal and it will be hidden and cleaner , also a smaller wick kevlar type would work best longer burn time and simmer time. over all great idea even though it has already been done but good video
xsplosive1975 4 years ago
it could be cleaned up, I was just looking for an easy way to make a great stove. I appreciate your input and will try your suggestions.
WeekendAdventurer 4 years ago
Great video... Where can the wick be purchased?
gsolo99 4 years ago
I got mine at a wood stove specialty store. I would also suggest a store where oil lamps are sold.
WeekendAdventurer 4 years ago
well, glad to see you back. nice stove.
paddyboy12432 4 years ago
thanks, sorry about the long vacation :-)
WeekendAdventurer 4 years ago