Added: 2 years ago
From: ESRepair
Views: 2,307
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (10)

Sign In or Sign Up now to post a comment!
  • Hello , This video was terrific , i have a car battery with 700 cc (Cranking Amp ) , i would like to know :

    1 ) what kind of power inverter i need in terms of Wattage and Brand name.

    2) I do DJ , sometimes i hire for camping event ,i have 2 power speakers , each speaker 600

    watts. i would like to know how much wattage inverter i need and the type of cable Gauge.Thanks

  • Is there any downside to using cable thicker than necessary?

  • @Bertziethegreat there are no downsides using a larger gauge cable than necessary to my knowledge. Both '+' & '-' cable should be larger if connected directly to battery. The chart assumes '-' cable attached to chassis or frame. Larger gauge cable will reduce resistance which causes voltage drop. -MrFixit

  • @ESRepair Thank you for answering both my questions on your videos. :)

  • I want to buy a power inverter and I have a small car... im looking forward to get like a 600 watt continuous power inverter, what sized cable should I get?

  • @SuperFrancisGuy You can use 8 gauge cable up to 7 feet, 6 gauge up to 10 feet, 4 gauge up to 22 feet, 2 gauge up to 28 feet from the battery. The smaller the gauge number the thicker the cable the less resistance to the power inverter. The ground needs to be connected to the metal frame of the car. Keep ALL cables as short as possible for the inverter to be most effective. The inverter also needs adequate ventilation because the internal fan turns on for loads over 100W. -MrFixit

  • @ESRepair thank you so much! although my local store only sells 4 gauge though... I wont be needing more then like 15 feet... MAX!

  • @SuperFrancisGuy 4 gauge will do just fine. Keep the ground cable as short as possible going to the metal frame. You can monitor the voltage drop by measuring the voltage at the inverter. Do not allow the voltage to drop below 12VDC. This will cause the inverter to draw more power and heat up the cables. Keep the cables well insulated from rubbing sharp objects. Use a fuse at the battery connection in case the cable shorts. If the cable are getting hot, use larger wire size -MrFixit

  • @ESRepair thank you so much! It is hard to find quality videos like yours...

  • @SuperFrancisGuy Anytime. If you and/or your friends need any help, you know where to find us. take care. -Mrfixit

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more