@jhb1298 Yeah i made this one my self , the hull , all the billet machined work is mine , just the motor and electrics are bought , prop as well , almost everything on it is hand modified in some way . On its fisrt run it hit 69 Kph on gps and after some port work and rudder changes it dialed in 87 kph , I do own one that is quicker but only this one totally hand made, I get 12 minute run times and good reliability but i did detonate the motor last winter , just about to bolt in a newy
There are so many different ways to go now, Mono,cat , hydro & Rigger- Nitro or Electric?
You can get into this with a China made ready to run boat for about 300-600$Au but this one is all hand made, It will cost you about $900 + 14 months worth of time = A lot
More to it than it would seem, you have to run about 1/2 the prop size due to the increased load,you need an out side supply of water due to there being no water speed at the rudder to pick up for cooling. This gets the boat tuned really well before i take it out ,more time on the lake and less time stuffing around with mixtures.
Dear Santa....
shay6281 3 months ago
Cute. Sitting still in there doesn't push any water through the cooling system.
Floatsfast 5 months ago
did u make the hull yourself, where did u get it?
jhb1298 8 months ago
@jhb1298 Yeah i made this one my self , the hull , all the billet machined work is mine , just the motor and electrics are bought , prop as well , almost everything on it is hand modified in some way . On its fisrt run it hit 69 Kph on gps and after some port work and rudder changes it dialed in 87 kph , I do own one that is quicker but only this one totally hand made, I get 12 minute run times and good reliability but i did detonate the motor last winter , just about to bolt in a newy
BKoffthehook 8 months ago
i dont want go in this water XD
SuperTeeths 1 year ago
was that a v 8?!?!?!?!?!
rideyz3 2 years ago
Na no v8 , just 6.5 ANGRY CC's
BKoffthehook 2 years ago
how much these damn six ass toys cost??
naruto101187 2 years ago
There are so many different ways to go now, Mono,cat , hydro & Rigger- Nitro or Electric?
You can get into this with a China made ready to run boat for about 300-600$Au but this one is all hand made, It will cost you about $900 + 14 months worth of time = A lot
BKoffthehook 2 years ago
nice lol not vry hard 2make a boat dyno
robosnsyrians 3 years ago
More to it than it would seem, you have to run about 1/2 the prop size due to the increased load,you need an out side supply of water due to there being no water speed at the rudder to pick up for cooling. This gets the boat tuned really well before i take it out ,more time on the lake and less time stuffing around with mixtures.
BKoffthehook 3 years ago
actually i suppose yr right wot happens if u run out of fuel or stall or do u have a thing on controller which tells u how much fuel u have got left
robosnsyrians 3 years ago
@robosnsyrians you just guess it out, and buy a bigger tank
YaMaHaCrAzY68 1 year ago
Looking good, how about some on water running videos....
aeromarine26 3 years ago
Nice sounds like its tuned pretty good. How are boat rc motor cooled?
sslusshy 3 years ago