@naher1 My car was ordered with the optional winter package that came with an 3.15 ratio LSD & heated seats, it was available on the 325is up until i think 96 or 97 when the 328is came out, those late model e36's had TCS and the LSD was not offered as an option anymore. I think getting a diff from the 3.0L e36 M3 would work for you, its final drive is 3.23 and should have even more lock than the optional LSD that came in my 325is.Try Bav Auto Recycling for a used one, shouldn't be more than $400
@SKUSANWOLEK ya thanks, actually i think the 95 3.0 liter mr had a final drive ratio of 3.15 and thats what i have in my car now, so do u think a 3.23 final drive ratio will give me better acceleration or should i just stick with the 3.15 from a 95 m3
@panchitop619 this one came with the car when i bought it, but i had a racing dynamics bar on my last two bmw,s it was around $200. it didn't look as nice but did the same job.
@kanjarbhai the filter in the car at the time of this vid was HKS, the rest if the intake i made from 3 inch aluminum bent tubing and blue silicone pipe. on my latest vid i have changed the filter to K&N, but i'll be going back to a stock intake as the car seem to run better with it. you can prob buy a whole intake kit but i'd spend that money on underdriven pully's and a good jim conforti chip and mabey some performance coil packs instead. Thanks for watching, check out the update video
absolute beauty! not overdone.....pretty much how I have my 325is done up, except a few things, and mines black. what hp / tq does it make? had it dyno'd recently?
@SirYakToast hey thanks for the compliment, i just got done installing kw V1 coilovers today! and have a set of staggerd beyern mesh wheels to be fitted also and should have a vid soon. I can only guess at what hp it makes?(never dyno'd) its an m50b25 non vanos with chip, intake, exaust ect, prbably not much more than stock 180hp but the centerforce clutch helps it pull pretty good and a set of under dreive pulleys would help also.
@SKUSANWOLEK hmm yours is a 92' just like mine so yes it is non vanos but still makes 189 hp stock (the motor makes 189 but maybe about 170 or so at the wheels. with all your mods im guessing your well over 200 bhp now. maybe even 210 - 215. and as far as pulleys i just ordered a set off ebay. made the mistake of not researching enough about them and realized i got ripped off. just make sure when u get yours they are UNDERDRIVE pulleys (smaller in diameter than stock pulleys).
@SirYakToast haha my mistake your right stock is 189hp not 180, and yea it would be nice to dyno to see were i'm at with hp the, chip says 18hp gain but probably half that to the wheels. the set of pully's i'm looking at are from bav auto and they are underdrive not just light weight unless you have a high power stereo then the alternator pulley is lighten'd instead of underdriven. I,m headin out to test the new coilovers today and prob make an updated video and thanks for the info.
@HPISAVAGE11 the headlights are made by depo and i got them at ddm tuning.com,the glass lenses are nice but the plastic they're made from is kinda cheap so be carefull installing them and don't turn the beam adjusment screws to much but other than that they're great and super bright, just have to get used to people flashing they're lights at you cause they think your high beams ore on
Most E36 owners install a Signature Motoring performance intake kit for around 9HP gain. Cost is a mere $150 or so, best value per HP gain in the E36 line.
Install time if only about 30-45 minutes in most applications. I have one in my 94 325i cabrio.
Crazy nice sound. Most performance guys install a Signature Motoring performance intake kit for around 9HP gain in the E30.
Install time is about 30 min, maybe 45 for two left hands. LOL
is that an m3 instrument cluster
naher1 1 month ago
@naher1 yes it is
SKUSANWOLEK 1 month ago in playlist Uploaded videos
@SKUSANWOLEK does it have an lsd diff? my 1995 325is does not and i am looking for one and wondering how much they are?
naher1 1 month ago
@naher1 My car was ordered with the optional winter package that came with an 3.15 ratio LSD & heated seats, it was available on the 325is up until i think 96 or 97 when the 328is came out, those late model e36's had TCS and the LSD was not offered as an option anymore. I think getting a diff from the 3.0L e36 M3 would work for you, its final drive is 3.23 and should have even more lock than the optional LSD that came in my 325is.Try Bav Auto Recycling for a used one, shouldn't be more than $400
SKUSANWOLEK 1 month ago in playlist Uploaded videos
@SKUSANWOLEK ya thanks, actually i think the 95 3.0 liter mr had a final drive ratio of 3.15 and thats what i have in my car now, so do u think a 3.23 final drive ratio will give me better acceleration or should i just stick with the 3.15 from a 95 m3
naher1 1 month ago
@naher1 If your swapping in a LSD anyways i'd go for the bigger ratio, it will improve acceleration.
SKUSANWOLEK 1 month ago
I have the same Momo Steering Wheel in my 1987 Saleen Mustang
S190K 2 months ago
Where and how much did you get your M strut bar for????? i have been looking for on for my 93 BMW 325i
panchitop619 4 months ago
@panchitop619 this one came with the car when i bought it, but i had a racing dynamics bar on my last two bmw,s it was around $200. it didn't look as nice but did the same job.
SKUSANWOLEK 4 months ago
Perfect, Keep it Kleen.
Terlis3000 7 months ago
@Terlis3000 thanks,its even cleaner now. its the only way to keep
SKUSANWOLEK 6 months ago
Yo bro can u tell me wat kinda airintake u have??
kanjarbhai 7 months ago
@kanjarbhai the filter in the car at the time of this vid was HKS, the rest if the intake i made from 3 inch aluminum bent tubing and blue silicone pipe. on my latest vid i have changed the filter to K&N, but i'll be going back to a stock intake as the car seem to run better with it. you can prob buy a whole intake kit but i'd spend that money on underdriven pully's and a good jim conforti chip and mabey some performance coil packs instead. Thanks for watching, check out the update video
SKUSANWOLEK 7 months ago
checkout the updated video of the car, looks a little different now.
SKUSANWOLEK 8 months ago
Nice! Is the dog aftermarket or OE?
TheMrFour20 8 months ago
@TheMrFour20 he's OE for shure
SKUSANWOLEK 8 months ago
absolute beauty! not overdone.....pretty much how I have my 325is done up, except a few things, and mines black. what hp / tq does it make? had it dyno'd recently?
SirYakToast 10 months ago
@SirYakToast hey thanks for the compliment, i just got done installing kw V1 coilovers today! and have a set of staggerd beyern mesh wheels to be fitted also and should have a vid soon. I can only guess at what hp it makes?(never dyno'd) its an m50b25 non vanos with chip, intake, exaust ect, prbably not much more than stock 180hp but the centerforce clutch helps it pull pretty good and a set of under dreive pulleys would help also.
SKUSANWOLEK 10 months ago
@SKUSANWOLEK hmm yours is a 92' just like mine so yes it is non vanos but still makes 189 hp stock (the motor makes 189 but maybe about 170 or so at the wheels. with all your mods im guessing your well over 200 bhp now. maybe even 210 - 215. and as far as pulleys i just ordered a set off ebay. made the mistake of not researching enough about them and realized i got ripped off. just make sure when u get yours they are UNDERDRIVE pulleys (smaller in diameter than stock pulleys).
SirYakToast 10 months ago
@SirYakToast haha my mistake your right stock is 189hp not 180, and yea it would be nice to dyno to see were i'm at with hp the, chip says 18hp gain but probably half that to the wheels. the set of pully's i'm looking at are from bav auto and they are underdrive not just light weight unless you have a high power stereo then the alternator pulley is lighten'd instead of underdriven. I,m headin out to test the new coilovers today and prob make an updated video and thanks for the info.
SKUSANWOLEK 10 months ago
where did u buy ur led headlights? mine are ccfl and suck during daylight cuz u can barely see them
HPISAVAGE11 10 months ago
@HPISAVAGE11 the headlights are made by depo and i got them at ddm tuning.com,the glass lenses are nice but the plastic they're made from is kinda cheap so be carefull installing them and don't turn the beam adjusment screws to much but other than that they're great and super bright, just have to get used to people flashing they're lights at you cause they think your high beams ore on
SKUSANWOLEK 10 months ago
Most E36 owners install a Signature Motoring performance intake kit for around 9HP gain. Cost is a mere $150 or so, best value per HP gain in the E36 line.
Install time if only about 30-45 minutes in most applications. I have one in my 94 325i cabrio.
Crazy nice sound. Most performance guys install a Signature Motoring performance intake kit for around 9HP gain in the E30.
Install time is about 30 min, maybe 45 for two left hands. LOL
BMWpower4me 1 year ago
Nice Momo Steering wheel!
tonyhuang619 1 year ago
man, I don't let my dog near my car. but inside!?
mrBlueScholars 1 year ago
i like it
massu11 1 year ago