i have a schumacher mi1 with an 8.5 t brushless and an 85 amp speed controller, dont know its top speed but it spins tyres at speeds close to your fastest...
I know the video is a little dated. But if you still have the cars and have not made any upgrades. Go lipo. I clocked my TT01 @ 65 kph with i little bit more to give.
I was running on a 35 amp ESC with very small 9t motor. (EZrun).
And a cheap 2s lipo. You can seriously get more preformance out of this thing :)
I now went 2s on a 5.5t and 60 amps esc. for a total costs of €50. But the speed aint funny anymore XD
i kinda wonder why everyone is so hyped about this... honestly. ever try and drive some track with that much power against someone with a "common" 5.5t brushed motor. all i see is wheel spin and lack of control......
i am going to use the 60A ezrun brushless ESC and a 3200kv tacon motor on a mihn battery i will upgrade later to lipo. because first i want to learn all about lipo batteries. so for that set up what gears would you recommend i have my tt01 stock 61/19.
have you tried to change it to 55t spur and 28t pinion gear? :) I have this (55/28) gearing in my TT-01, want to buy Ezrun the same as yours and wondering how fast it will go with my gearing
why are people still inquiring about NIMH batteries??! they SUCK. dude drop a lipo in that thing and get rid of them funky ass rubber tires...foams are the only way to go.
normal 2s with these ezrun will kill the whole tt-01 chassi^^..the diff will brn after 1hour^^
i drive an new 2010 edition ezrun with about 6500kv with 3s...on my custom sprint2 chassi..top speed is over 120kmh yea..but its amazing for drifting..(high speed drifting btw..)
No shit! DUDE! u recorded in GALLIONS REACH! I live not far from there. Ive recently started getting into rc cars. Can u recommend any good companies? Is eletircal motor better than nitro engine?
@zamant88 electric powered cars are cheaper to run, but cost more for a comparable preformance level to nitro cars, they pay themselves back over time if you use the car often as fuel isnt cheap and you have to go get it, or have it delivered which is rather inconvenient also nitro's are messy and noisey and cannot be used indoors
pure preformance?
Brushless Paired with Lithium-Titanium cells beat all, but the cost is stupid,
and Li-T cells are rare like diamond dust at the moment.
Can u tell which esc u have in the car in that vid? Is it standard or isn't the esc good enough to a motor like tthat... a so big motor... or shall i take er better esc in my car? Please, can u answer - and advide me? Thx... sorry my english is bad :) But thanks.
love this motor, ive got one in a bug crusher with a 11.1 lipo and no matter what speed it will wheely, trouble is its costing a fortune in shells when it flips on its back haha
@cristianoid hi mate, lot item i buy on ebay, something on other online shop, but forget... sorry i buy everything long time ago.. lol some parts i buy from TOYEAST.co m
@STdemoniac I have a few questions. Firstly, I'm thinking about buying a Tamiya Schnitzer Bmw TT-01 M3 kit. Heres what I'm thinking I should buy: Hitec Aggressor with 1 hs-311 servo, Tamiya Schnitzer BMW TT-01 M3 kit, a venom 3600mAH 6-cell 7.2v battery pack, and a tower hobbies charger. (With all the tools and paint) Do you think I should maybe get other items to make it better, or switch 'em? And secondly, can you reuse the remote control for other rc cars? Please reply.
@STdemoniac add about 5 teeth to your pinnion gear and upgrade to LiPo 11.1v battery just an FYI- (engines Kv rating)x(battery voltage)=rpm of engine. so, 6000kv x 11.1v = 66,600 RPM.. compared to 6000kv x 7.2v = 44.500 RPM.. LiPo makes all the difference.. good luck.
@Bongwater123 not usually.. the motor mount has some adjustbility in it, typically around a quarter inch or so. thats plenty of room to play with pinion sizes.. but keep in mind, the higher your gear ratio is, the more strain gets put on your engine which creates heat issues, so i wouldnt go more than 5teeth over stock, thats a safe change, but still big enough to make a difference (and its cheap)
@cristianoid dude, buy alot from most model shops, if you have any local to you, they may stock it as tamiya is such a well known brand is stocked by alot of stores. plus a good site to try is wonderlandmodels (dot) com
hi, i have a tamyia tt01, and i went to a rc car store to put a brushless motor and also change the speed controller but i found out that`s not compatible with the model of my rc car, how did you put that on yours ?
I was expecting a little bit more top whack from a 5.5T brushless, if I'm honest... but the acceleration is in a world of its own it appears. Try a higher gearing, I reckon you could be looking at a 75km/h car...
Nice one mate if you want more speed get a pro stock 13 turn motor. That's what I have on my tl-01 car. But if you do get the motor you might want to consider getting a fan to cool the e.s.c and motor down. Beleave it or not the motor will double the speed of your car. Mine goes 51.5 mph i think that is near 130 kph but I'm not to sure.
@sk84lifethorney2 for 1/10 truggy best 9 - 12T brushless, my friend run same ezrun 5.5T on traxxas slash 4wd, but have problem with overheat..... this 5.5T system more for onroad, or other light weight fast models
Not dissing it, just wondered because I also have one which is running a Tamiya RS 540 sport tuned motor and it goes 42 Kph. I thought brushless would have given you a massive speed increase.
hey must i make all my parts in my tamiya tt-01E into your "bling"(aluminium set)? the shop uncle said that i should just change the shaft in the middle only
If i could get a reply asap that would be great, im going to be running my tt-01 with a brushless system on 2s what gearing are you running?, also are you running hot is there any tips or pointers i can get thanks nice video
thires two differnt eletric motros brushed and brushless,brushed motros have wayy more friction when sping inside but brushless has wayy more current into a slippery spin wayy easyer for it to spin just look up the differnce of normal brushed motore and stupid fast brushless motor ull see the differnce roex
Brushless motors give more speed and acceleration. The problems are two first the ability of the chassis to handle that power can easily be exceeded, making the car unstable, and second brushless motors need special ESCs which are an extra expense. Unless the car is to be completely uprated its probably unsise to just put in a brushless motor alone.
what system ist more economical (mean for longest run time) I would buy new system for my crawler, I don`t know which more economical or brushless or brushed?? :S what you think? which system beter? (looking for 32T-55T motor)
@STdemoniac I am no expert, but yes I think the brushless is some kind of three-phase system, as they have three powercables connected. Also the brushless should be more energy efficient, though they are usually far more powerfull, so they actually consume more energy anyways. At least that's my impression
I had my TT-01 out one night with a 4800KV Losi Xcelorin and an 11.1V lipo with a 23t spur that I managed to make fit. I demolished it into a cement curb when i lost control during a power slide at around 100 km/h. That was about 4 months ago. It still sits in pieces. Now I have a Sprint 2 sport, the same thing happened but with a parked van and a substantial amount of flying leading to the crash.
hi, i have a MAmba MAx 7700kv brushless system 7700kv (beyond 4t brushed) and i need to find some batteies for it. I was looking into the orion 5100mah rocket pack, i see you have the 4000mah 1, does it give enough power??? BTW, the thing about exploding lipos scares me a bit as i overchage my batteries sometimes so idk if lipo would be good for me.... Are lipos really that dangerous?
@stratmast3r As long as you get a charger that shuts off when charging is supposed to be complete, and set the charging to 1 amp per 1000 milliamps you should be fine.
Put a Lipo battery in that and your speed will double. I have the 9T EZrun and it does around 80 with 61/22 gearing. I used to run NiMH but once I got a Lipo I definately wont go back!
yeah man they are sooooo dangerous. they like blow up and shit burn your house down..lol. just kidding man, just follow instructions and youll be fine
I have this car with a 8.5 but i broke all the diffs.
How you solve that problem?
I need help!!
Thanks
tuningpau 5 days ago
lächerlich 45 kmh.. :D
BimHennemann 2 weeks ago
nice vid but when you put the ezrun 5.5 t motor in did you add anything else like a new esc or fan thnx
CRINKLETOES12 2 weeks ago
how much faster would it be with a lipo
MrOne2345678 3 weeks ago
PUT ONE 3S 2200 LIPO NANOTEC AND HE WILL GO MORE VERY FAST
thiagodossantosfig 1 month ago
@thiagodossantosfig or buy a 5900 mhaz from lipo then he go fast
maikelkuikman 3 weeks ago
why would someone do that to a tt01. T_T that tt01 belongs in the trash lol
sindude300 1 month ago
dissapointed
RAPREMIXER 1 month ago
you dont need a brushless system if you have larger diameter wheels Like I have on my Grasshopper, But that can be fitted also with brushless system.
stock about 40kph
hgortermarof 1 month ago
how much run time do you get with this system?
choulie93 1 month ago
thanks
82kyliesexy 1 month ago
where did you get your hop up from
82kyliesexy 2 months ago
@82kyliesexy most item from ebay, and other online RC shop :))
STdemoniac 1 month ago
@STdemoniac I would use a liPo batery, then your car would drive faster as with a
NiMH-batery.
LorryLobster 5 days ago
Man you need a little 3s lipo in it!
fordyrox 2 months ago
holy fukin shit ill buy it aff ye fer 700 quid
MrAaron9468 2 months ago
@MrAaron9468 Are you legit man? For 700 GPB ill make you one, but faster :)
fordyrox 2 months ago
my brushless is up to 125 kph,
it s a super levant(tamiya) tuned by myself :D
make new videos and learn to drift, 'cause that looks freaky good
if you can
lingobong 2 months ago
Whats the stock gearing for the TT01. 28/62?
MeNoGud 2 months ago
on nimh is slow ... test lipo ;)
FulcrumxD 2 months ago
Get a lipo. On 2S my 13T about the same as this.
RUDEI30Y 3 months ago
have u had any problems with the bevel pinion can i have broken to with my brushles sin it
SuperSnoozie 3 months ago
i have a schumacher mi1 with an 8.5 t brushless and an 85 amp speed controller, dont know its top speed but it spins tyres at speeds close to your fastest...
MegaStables 3 months ago
deam dude in that car is paris:)
theriba112 3 months ago
is it not too mutch fore a TT01?
MCLERC88 3 months ago
my colt10 electric with the same 5.5t brushless goes faster than that
gamo98 4 months ago
NICE CAR!
Ezrun has good prices, that is what I USE IN MY 60+MPH CAR!
i subbed 2 U !
(sorry about sending more than 1 video response, please remove 1)
THANKS MY FRIEND!
GODnSPEED 5 months ago
use LiPo, NiMH have low discharge rate
Perfet05 5 months ago
I was like, 'WOAH!' then I saw the kph on the gun
Mistermoose125 5 months ago
TESCO !!!!
addxboss 6 months ago
Hei, hva heter den tingen du brukte til å måle hastigheten?
KennethBjorvatn23 7 months ago
4s lipo and youll be drifting at 49kph...
240sxdrft 7 months ago
i cant imagine this thing on 3s.... :D
98Ps3lover 7 months ago
i am 90 % shure that that moter isnt running 100%
SpeeedErik 7 months ago
You can get a cheep 13T brushless kit here.
bestratedshop.co.uk/index.php?route=common/home
boomringleader 8 months ago
Hey I want to make my rc car faster heres what I got
Alloy tt01
Brushless 3000kv motor
Bigger wheels
11.1v lipo (lightweight version)
Dunno the gearing but I'm happy with that
Light oil damper shocks
Digital lightweight receiver
Anything else I can do, it does between 45mph and 50mph at the min
redlines94 8 months ago
what does brushless mean can someone please tell me
PS3sacker 8 months ago
@PS3sacker i know just how you feel, i can't find out either!
movieshop1000 7 months ago
hey i got that motor in a hpi blitz and the motor gets really hot even with low gearing
mrhamfishrc 8 months ago
I know the video is a little dated. But if you still have the cars and have not made any upgrades. Go lipo. I clocked my TT01 @ 65 kph with i little bit more to give.
I was running on a 35 amp ESC with very small 9t motor. (EZrun).
And a cheap 2s lipo. You can seriously get more preformance out of this thing :)
I now went 2s on a 5.5t and 60 amps esc. for a total costs of €50. But the speed aint funny anymore XD
meamjustme 8 months ago
haha i have a savage he`s speed is 130
Limaser12 8 months ago
whats the battery life on that thing?
RGBLackson 8 months ago
i take that back it looks kinda cool ;)
sammyrock0087 8 months ago
why is the front all gay and the wrong colour?
sammyrock0087 8 months ago
i've installed the motor, did it reduce the range of the car?
patyfarr 9 months ago
Comment removed
patyfarr 9 months ago
why won't you use lipo? its very powerful than the battery you're using right now
ilovehell03 9 months ago
my 13t goes just as fast. Well did. But thats another story. change the Pinion gear and the other for more speed.
TheStealther 9 months ago
hah mini car lol love it
1jaimealamos3 9 months ago
pft
my 27 turn non brushless goes even as fast
STRANGE HUH?
58T spur gear wif 24T
and a 5100nimh accu 0.o
kill4kill2kil 9 months ago
Gal jau isbandei tteske su lipo baterija? Kokie tuningai yra vertingiausi varzybu atzvilgiu? Aciu
portable112 9 months ago
i kinda wonder why everyone is so hyped about this... honestly. ever try and drive some track with that much power against someone with a "common" 5.5t brushed motor. all i see is wheel spin and lack of control......
evilBunny81 9 months ago
Damn who needs a Lamborghini when you can have one of these?
coolmike362 9 months ago
how fast does stock tt-01 goes?
ds2626 9 months ago
how long does the 4000 mAh battery last ? (running time)
patyfarr 10 months ago
nice sound! go turbo!
teamgshock 10 months ago
how much does it cost for a tamiya tt-01
anataking 10 months ago
@anataking i was able to get a ready to run for €120 in the netherlands only a battery and charger and i was able to drive
kill4kill2kil 10 months ago
how much does it cost for a tamiya tt-01
anataking 10 months ago
is that expensive ??
yokiitaja1 10 months ago
hobbypartz. c o m is a good place to buy these
drewfocuse99 11 months ago
what does 5.5T mean? is it gear ratio?
Allexxx96Reloaded 11 months ago
@Allexxx96Reloaded motor turns, the lower the turns, the faster the motor :)
Softairguy 11 months ago
I got mine on eBay with 90 min speed charger and 3 batt packs rc and car with on and off road wheels for £50
redlines94 11 months ago
how much do thees things cost, 60- 100$ bucks or more?
ThreeDaysOfDan 11 months ago
i am going to use the 60A ezrun brushless ESC and a 3200kv tacon motor on a mihn battery i will upgrade later to lipo. because first i want to learn all about lipo batteries. so for that set up what gears would you recommend i have my tt01 stock 61/19.
supersanchez1991 11 months ago
STdemoniac, do you have stock spur and pinion gear?
Skoti89 11 months ago
@Skoti89 yeap mate, gearing ist stock :))
STdemoniac 11 months ago
@STdemoniac
have you tried to change it to 55t spur and 28t pinion gear? :) I have this (55/28) gearing in my TT-01, want to buy Ezrun the same as yours and wondering how fast it will go with my gearing
Skoti89 11 months ago
i dont believe tht gearing is stock
MrBushchicken69 3 months ago
@MrBushchicken69 5.5t brushless motor. Yeah it is stock.
meamjustme 2 months ago
what size is it
jacksonsl2016 11 months ago
Demoniac kur pirkai greicio matukli ir kiek mokejai?
jjustuxas 11 months ago 2
@jjustuxas is ebay pirkau, pries tris metus apie 80£ kainavo
STdemoniac 11 months ago
That should be going faster. I clocked mine at 59 kph running a 9t version. The ESC only draws 35 amps and i had not enough space to reach the top.
meamjustme 1 year ago
why are people still inquiring about NIMH batteries??! they SUCK. dude drop a lipo in that thing and get rid of them funky ass rubber tires...foams are the only way to go.
jayjaylen75 1 year ago
how much is that car ?? and where did you buy it??
elementlol1 1 year ago
i hav 4.5 turns on mine and it goes about 70mph
TheGovenator867 1 year ago
normal 2s with these ezrun will kill the whole tt-01 chassi^^..the diff will brn after 1hour^^
i drive an new 2010 edition ezrun with about 6500kv with 3s...on my custom sprint2 chassi..top speed is over 120kmh yea..but its amazing for drifting..(high speed drifting btw..)
Chipher277 1 year ago
Cool!, how long does it take for a 7.2V 4000mA Battery to charge? and how long will it last during play time.
ujayet 1 year ago
wow, i thought it wasmph... sigh 51 kmh ... how many cell are you running?
LiveTheLimit 1 year ago
How long does the battery last?
ZFluxGuides 1 year ago
Myn is not brushless and goes twise the speed
mentaltesticles 1 year ago
Can you get spares for these
3pivotmaster 1 year ago
is this a good esc and motor combo?
TheLmc777 1 year ago
what battery r u using and btw u solder ur motor wires the wrong way around
daniyalranjbar 1 year ago
No shit! DUDE! u recorded in GALLIONS REACH! I live not far from there. Ive recently started getting into rc cars. Can u recommend any good companies? Is eletircal motor better than nitro engine?
zamant88 1 year ago
@zamant88 electric powered cars are cheaper to run, but cost more for a comparable preformance level to nitro cars, they pay themselves back over time if you use the car often as fuel isnt cheap and you have to go get it, or have it delivered which is rather inconvenient also nitro's are messy and noisey and cannot be used indoors
pure preformance?
Brushless Paired with Lithium-Titanium cells beat all, but the cost is stupid,
and Li-T cells are rare like diamond dust at the moment.
FirewallAndFlush 1 year ago
Can u tell which esc u have in the car in that vid? Is it standard or isn't the esc good enough to a motor like tthat... a so big motor... or shall i take er better esc in my car? Please, can u answer - and advide me? Thx... sorry my english is bad :) But thanks.
Simon
Karljoe95 1 year ago
love this motor, ive got one in a bug crusher with a 11.1 lipo and no matter what speed it will wheely, trouble is its costing a fortune in shells when it flips on its back haha
andywhiteley1 1 year ago
how fast is this car stock
ZXETIT 1 year ago
hey mister, please , can you tell me? wher do you buy spare parts for this tamiya (or similar)
(i buy in towerhobbies EEUU) traxxas parts but I wish get a tamiya with abailable parts also of course
thanks very much and excuse my english, please
ah!!! go for lipos , much better than niMh
cristianoid 1 year ago
@cristianoid hi mate, lot item i buy on ebay, something on other online shop, but forget... sorry i buy everything long time ago.. lol some parts i buy from TOYEAST.co m
cheers
STdemoniac 1 year ago
@STdemoniac I have a few questions. Firstly, I'm thinking about buying a Tamiya Schnitzer Bmw TT-01 M3 kit. Heres what I'm thinking I should buy: Hitec Aggressor with 1 hs-311 servo, Tamiya Schnitzer BMW TT-01 M3 kit, a venom 3600mAH 6-cell 7.2v battery pack, and a tower hobbies charger. (With all the tools and paint) Do you think I should maybe get other items to make it better, or switch 'em? And secondly, can you reuse the remote control for other rc cars? Please reply.
Chris23lee 1 year ago
@STdemoniac add about 5 teeth to your pinnion gear and upgrade to LiPo 11.1v battery just an FYI- (engines Kv rating)x(battery voltage)=rpm of engine. so, 6000kv x 11.1v = 66,600 RPM.. compared to 6000kv x 7.2v = 44.500 RPM.. LiPo makes all the difference.. good luck.
UH60crewman 8 months ago
@UH60crewman if you change the number of teeth on the pinion do you have to change the spur gear?
Bongwater123 7 months ago
@Bongwater123 not usually.. the motor mount has some adjustbility in it, typically around a quarter inch or so. thats plenty of room to play with pinion sizes.. but keep in mind, the higher your gear ratio is, the more strain gets put on your engine which creates heat issues, so i wouldnt go more than 5teeth over stock, thats a safe change, but still big enough to make a difference (and its cheap)
UH60crewman 7 months ago
@cristianoid dude, buy alot from most model shops, if you have any local to you, they may stock it as tamiya is such a well known brand is stocked by alot of stores. plus a good site to try is wonderlandmodels (dot) com
TheDriftNutz01 1 year ago
hey mister, please , can you tell me? wher do you buy spare parts for this tamiya (or similar)
(i buy in towerhobbies EEUU) traxxas parts but I wish get a tamiya with abailable parts also of course
thanks very much and excuse my english, please
cristianoid 1 year ago
hi, i have a tamyia tt01, and i went to a rc car store to put a brushless motor and also change the speed controller but i found out that`s not compatible with the model of my rc car, how did you put that on yours ?
micoleaodourado11 1 year ago
@micoleaodourado11 look on ebay 1/10 onroad brushless system, fix easy, just replace u stock motor and esc :)
STdemoniac 1 year ago
@STdemoniac THANKS, it looks easier than i thought, i will try...
micoleaodourado11 1 year ago
these things are like jets skis, there fun for 5 minuts, then its the same stupid shit
bretts0509 1 year ago
thats slow in my tt 01 iv got a 13.5 turn and it's crazy nomater what battery you have
chsey 1 year ago
Get 11,lipo dude!:D
dicofreak123 1 year ago
how to download this video
dordoraja 1 year ago
Lipo 2cell 7,4v batteri will make this thing fly. Got the same engine on my kyosho tf-5
Johnsentheguitarhero 1 year ago
do lipos make the motor run faster than nimh?
justinbeiberhascrabs 1 year ago
i was gonna get that...think ill leave it cuz its that fast just with a lipo, do u know anything faster?
justinbeiberhascrabs 1 year ago
hey why its so lame?! Even my TT-01 with 12 Turn LRP Fusion is faster! Try some LRP Stick Pack Batteries...
sharingan180185 1 year ago
i got mine 2 weeks ago XD
nicdizon24 1 year ago
I was expecting a little bit more top whack from a 5.5T brushless, if I'm honest... but the acceleration is in a world of its own it appears. Try a higher gearing, I reckon you could be looking at a 75km/h car...
AmartoSengupta 1 year ago
nice car, good job but the brushless is sucks and slow in your car!!!!
dtim02 1 year ago
Nice one mate if you want more speed get a pro stock 13 turn motor. That's what I have on my tl-01 car. But if you do get the motor you might want to consider getting a fan to cool the e.s.c and motor down. Beleave it or not the motor will double the speed of your car. Mine goes 51.5 mph i think that is near 130 kph but I'm not to sure.
connorSFL 1 year ago
@sk84lifethorney2 for 1/10 truggy best 9 - 12T brushless, my friend run same ezrun 5.5T on traxxas slash 4wd, but have problem with overheat..... this 5.5T system more for onroad, or other light weight fast models
STdemoniac 1 year ago
@STdemoniac What mAH do you recommend for this?
evilkid227 1 year ago
oye tesco`s
where r u guys at in Britain
EmperorOfHonour 1 year ago
u should try a lipo, very fun
sweir127 1 year ago
It isn't going tht fast:( I expected like 60mph(100kph) when I saw the 6000kv
traxxasslash95 1 year ago
@traxxasslash95 Notice he's using a 4000MAH nihm....not a lipo
sqeker09 1 year ago
pffff, my tamiya ta-05 with 17t brushed engibe gone 60 km/h
superliferc 1 year ago
what battery do you use?
driftonair 1 year ago
@driftonair I write on the description :DDD ORION Nimh 7.2 4000mAh
STdemoniac 1 year ago
@STdemoniac oh yeah haha how long does it last for
driftonair 1 year ago
cool toy!!!!!!))))
GanGNY 1 year ago
What gearing do you have on it or is it just standard?
modeldat 1 year ago
@modeldat all gearing standart mate ;)
STdemoniac 1 year ago
make glod connectors.its better.:D nice video
2duraka 1 year ago
omg! Great! I have a tamiya 1:10 Subaru Impreza wrc too, but it doesn't run fast as your. I will try.
llopeznovoa 1 year ago
what is that thing you are messuring speed with ? how its named ? thx
bugjoke489 1 year ago
@bugjoke489 just write-in ebay BUSHNELL SPEED GUN, or just SPEED GUN ;-)
I have bushnell
STdemoniac 1 year ago
what is faster the 9t or the 5.5 t?
buneaalexpetru 1 year ago
@buneaalexpetru 5.5T faster
STdemoniac 1 year ago
my tamiya sand viper 13 turn ez run goes 55
Quoc011 1 year ago
where abouts did u get your speed gun from?
ThisIsMovies 1 year ago
does your car go faster than that or is that it?
Not dissing it, just wondered because I also have one which is running a Tamiya RS 540 sport tuned motor and it goes 42 Kph. I thought brushless would have given you a massive speed increase.
MattyCons59 1 year ago
U NEED 11.1V FOR MORE SPEED..
JAMESTAPPJR 1 year ago
@JAMESTAPPJR I ready have one 3s LIPO ;) in fev day time do speed test with it lol
STdemoniac 1 year ago
what run times are you getting?
Straightsix76 1 year ago
hey must i make all my parts in my tamiya tt-01E into your "bling"(aluminium set)? the shop uncle said that i should just change the shaft in the middle only
jameschoi999 1 year ago
check yours batteries.
imtrill07 1 year ago
@imtrill07 you right , I find "T" conection foult on batery :((((
anyway now in fast time I make new speed test video with 3s LIPO lol
STdemoniac 1 year ago
what is that ?
My tt-01 with Ce-4 is faster than your car.
My Ta-05 with 13.5T lrp Stock Motor drives 80km/h
Killahdz 2 years ago
bro..what kind of bell crank is that..
wannistelrooy 2 years ago
why my tt 01 goes faster than yours?
yours 5.5t should be fast?
i dont get it..
btw nice rc
sixxxPsP 2 years ago
he is using nimh are you using lipo if so that should answer your question
bigdog813 2 years ago
yeah..
thx
sixxxPsP 2 years ago
If i could get a reply asap that would be great, im going to be running my tt-01 with a brushless system on 2s what gearing are you running?, also are you running hot is there any tips or pointers i can get thanks nice video
bradley26inch 2 years ago
thires two differnt eletric motros brushed and brushless,brushed motros have wayy more friction when sping inside but brushless has wayy more current into a slippery spin wayy easyer for it to spin just look up the differnce of normal brushed motore and stupid fast brushless motor ull see the differnce roex
iloveyoyo222 2 years ago
what does brushless rc cars do whats difference mesage me on my act please
roexify 2 years ago
Brushless motors give more speed and acceleration. The problems are two first the ability of the chassis to handle that power can easily be exceeded, making the car unstable, and second brushless motors need special ESCs which are an extra expense. Unless the car is to be completely uprated its probably unsise to just put in a brushless motor alone.
gunsandroses1111 2 years ago
brushless same like three-phase?? :)
what system ist more economical (mean for longest run time) I would buy new system for my crawler, I don`t know which more economical or brushless or brushed?? :S what you think? which system beter? (looking for 32T-55T motor)
thanks :D
STdemoniac 2 years ago
i always get kicked out of that car park lol i want a tt-01 to drift but cant find um n e were
co61989 2 years ago
@STdemoniac I am no expert, but yes I think the brushless is some kind of three-phase system, as they have three powercables connected. Also the brushless should be more energy efficient, though they are usually far more powerfull, so they actually consume more energy anyways. At least that's my impression
2testtest2 1 year ago
cool vid
mabey a cool hopup wil be the graphite conversion kit with lipo 8or5000A
nice bodywork
1993kyokushinkai 2 years ago
can this work with a rustler xl5
classclown96 2 years ago
it would but i would recomend a 8.5 or 10.5t system for temps
442paul 2 years ago
I had my TT-01 out one night with a 4800KV Losi Xcelorin and an 11.1V lipo with a 23t spur that I managed to make fit. I demolished it into a cement curb when i lost control during a power slide at around 100 km/h. That was about 4 months ago. It still sits in pieces. Now I have a Sprint 2 sport, the same thing happened but with a parked van and a substantial amount of flying leading to the crash.
wesalwayswins 2 years ago
learn to drive :P
panhead88 2 years ago
too much speed for too much gravel on the side of the road
wesalwayswins 2 years ago
was only joking :D ...11.1V is powerful and takes time to control :)
panhead88 2 years ago
yeah, the car just about does catwalks. its in the air just about as much as it is on the ground
wesalwayswins 2 years ago
hi, i have a MAmba MAx 7700kv brushless system 7700kv (beyond 4t brushed) and i need to find some batteies for it. I was looking into the orion 5100mah rocket pack, i see you have the 4000mah 1, does it give enough power??? BTW, the thing about exploding lipos scares me a bit as i overchage my batteries sometimes so idk if lipo would be good for me.... Are lipos really that dangerous?
stratmast3r 2 years ago
@stratmast3r As long as you get a charger that shuts off when charging is supposed to be complete, and set the charging to 1 amp per 1000 milliamps you should be fine.
Max44091 2 years ago
were did u get the body
snakeyes2414 2 years ago
I buy it together with shassi
STdemoniac 2 years ago
49kmh=30.44 mph
guys2nv 2 years ago
Wow. Put that thing on Lipo. Zoom Zoom Zoom.
Max44091 2 years ago
i have a question and i hope i get an answer.
can i put brushless motor on tt01 without adding any aluminium ?
plz answer
godrugal1 2 years ago
yes mate you can use brushless without aluminium,
but... sometimes plastic center drivershaft on high speed have vibration, if that hap for you, then change it ;)
STdemoniac 2 years ago
what are important aluminm parts that i have to get?
i know that one of them is the shaft
godrugal1 2 years ago
u hav too much aluminium
SUPERFORMIAN 2 years ago
Put a Lipo battery in that and your speed will double. I have the 9T EZrun and it does around 80 with 61/22 gearing. I used to run NiMH but once I got a Lipo I definately wont go back!
kpkracing 2 years ago
are lipos dangerous? What lipo do you have and what charger?
stratmast3r 2 years ago
yeah man they are sooooo dangerous. they like blow up and shit burn your house down..lol. just kidding man, just follow instructions and youll be fine
panhead88 2 years ago