where did you get the things to build this? ive asked so many but they dont tell me, can you please tell me where to get these kind of thing? if so thanks
yes but it cant adapt as well to random errors - e.g. if one can was slightly weight biased and the tower was toppling to one side, the human would probably outperform this robot at that point.
ok, one tip. Otherwise its perfect. Change it in some way so that the machine adds a can to the top instead of lifting the whole stack. That way you can stack higher and without it all falling over sometimes.
If it would stack on top, it would not be able to go higher, as the height of the machine would limit how high it could stack. The way it's built now enables it to keep on stacking untill the machine can't lift the weight of the stacked cans anymore, or when the cans hit the ceiling. I think making the grabbing of the cans smoother, and the placing on top of the new can a little bit more precise would make this system perfect
Yes, but with this machine. Try it yourself. Stack empty cans, once you get to about 5 or 6 it gets very hard to keep them from falling over. Now try it again, but add them to the bottom. It is even more hard, maybe 4 or 5 until they start leaning dangerously. I really think that you would be able to make the machine stack higher if it were to add to the top. I cant try since i dont get an RCX for another month but once i get it i will do i good demonstration.
12 things ur doing: 1. Your reading my comment 2. Now your saying/thinking thats a stupid fact. 4. You didnt notice that i skipped 3. 5. Your checking it now. 6. Your smiling. 7. Your still reading my comment. 8. You know all you have read is true. 10. You didnt notice that i skipped 9. 11. Your checking it now. 12. You didnt notice there are only 10 facts Copy and paste to 1 video, tomorrow will be your best day ever! no matter what
@legoty10 Its not useless at all! Just make the belt longer, have it run from your living room to your bin. Have a coke. Put it on the belt, make the stacker chuck it into the bin or something.
it houses the pneumatic piston air tanks. the motor compresses the air and it is stored in those tanks. then when needed the air is despensed to the pneumatic pistons.
No. The gripper is not powerfull enough. There is already a problem with empty cans... that's why i taped them (the purple line), so they could not slide down. I also think the carrousel is not powerfull enough to circle full cans..
Dat viel mij 100% mee. Ik had als backup plan om aan de onderkant van de blikje een platte magneet te plakken, maar dat was dus niet eens nodig. Wel staat de paal lichtelijk uit het lood...
I thought it will carry the last one and let the whole thing drop. >:D
BlitzkriegZer0 6 months ago
but will it blend?
ThatGuy3141 6 months ago
Nice
BigFatHariyCat 7 months ago
i didnt know there was coke light
PikaboYou 7 months ago
cool!, are you to friendly, to tell me what do you use for motors in the pneumatic module?!
legofunny1 8 months ago
THAT helps a persons stacking problem!
norwegianguy1000 10 months ago
i wonder if it can stack like 50 ?? cuz its pretty stable
MsHackUp 11 months ago
are the air tanks used for im guessing yes?
xMattJay 11 months ago
are those tanks metal?
NEOCUBEST 1 year ago
This has been flagged as spam show
@NEOCUBEST nope plastic :)
(got some my self)
reffstrup 9 months ago
u are drunk?
rapolast 1 year ago
did u make it?
killerman22ful 1 year ago
oh snap.. it's just like the McDonalds drink machine!!! epic
kiyotewolf 1 year ago
How many cans were you able to stack like that?:p
TrainingMacro 1 year ago
@TrainingMacro
I'm guessing .. 5
kiyotewolf 1 year ago
nice i think its kool that it dosent fall over
william321113 1 year ago
Can it also pick up beer?
maartendekleijn139 1 year ago
pneumatics huh, they never had that back in the day lol
mclmatty 1 year ago
i would call u a geek but that is way to awsome (could watch it 24/7)
codey3197 1 year ago
This has been flagged as spam show
to skip add click the link below
0:01
DrRowanze 1 year ago
awsome
emogta 1 year ago
dude u can like make the tall thing an elevator that keeps going up and down....oh and how much did all that cost cuz i wantz it
wowplaya1997 1 year ago
wouldnt it be easier just to do this by hand????
rickyman1234 1 year ago
how high can it saple?
Klonkiller888 1 year ago
percise balance O_O ...
klaymationist2000 1 year ago
which computer brick you prefer the NXT or the RCX?
legoman909 1 year ago
Amazing! I have a small Mindstorms kit and I only make cars :)) I'm 12 :))
castraveticufrisca 1 year ago
if you build a lego wall around it and leave a small square open you it could be a soda machine
clevelandsmith65 1 year ago
where did you get the things to build this? ive asked so many but they dont tell me, can you please tell me where to get these kind of thing? if so thanks
heli121212 1 year ago
that is cool
1234567890PokemonGuy 1 year ago
FOX , you can make a sky tower out of this if you make it run for 5 months non stop XD
Leizazure 1 year ago
can he do Coca Cola normal to>? becayse coca cola light is not that heavy :P
TheDutchGamers 1 year ago
nice
kind of points less but really cool
MrSn0vvman 1 year ago
This has been flagged as spam show
how did you make it could you make a video on how to make it please and make more keep up the good work
yousuck785why 1 year ago
how did you make it could you make a video on how to make it please and make more keep up the good work
yousuck785why 1 year ago
Lego#57 - Tin can stacker
yousuck785why 1 year ago
Good, but one question...
Can it lift cans that are FULL not empty?
Flyingstarstorm 1 year ago
cant believe how high this think can stack em
snapdatcracker 1 year ago
it´s cool but useless.
Helldriver7839782389 1 year ago
i can do that too .. but faster with my hands..and cheaper
loliver231 2 years ago
=.='
maffoAQ 2 years ago
but i know that you can't build this tin can stacker.. foxbox61 - great job! :)
vojteks 2 years ago 2
@loliver231 Yes but why do it faster when you can spend a day making a machine to do it for you? There is no point to lego... only fun!
Dominoe11112 2 years ago 2
What's the fun in that!?
DeffeLeopard 2 years ago
man, i wish i didn't have a life. lol. love your stuff. you should pursue a career in robotics engineering
883gilmour 2 years ago 3
do those blue tank like things say AIR TANK? cause if they do I WANT 1 OF EM
boldziga 2 years ago 2
Yes, they are official Lego pneumatic air tanks. On eBay i bought 2 yellow submarines (set 8250)
foxbox61 2 years ago
They are air tanks !
TCCHowie 2 years ago
@boldziga it does
mrloveplums 1 year ago
Wow pneumatic cylindars weak man
1zacster 2 years ago
I can't even do that.
moldylemoninc 2 years ago
@moldylemoninc I think doing that is more difficult than programming such a robot ;) because the bot moves slower, more linear and without shaking.
Legominder 2 years ago
Nice!
bigdestroyingrobot 2 years ago
i thought they would fall!
MaRiNg123 2 years ago
now make it do something useful :D
uberKy 2 years ago 6
put a hot glue gun right before the lifter so they stick together and build a tower!
dcallstar51 2 years ago 5
very useful...
mefire66 2 years ago 3
people have to much spare time on there hands but it cool
thatmanaa 2 years ago 3
This comment has received too many negative votes show
Nice But I Can Do Better XD
jacobryan01 2 years ago
This has been flagged as spam show
HOW OLD R U U FAAGGGG?!!! G3t A LIFFF3, Godddddd, L3gos?
l3go's?! r3ally? Na i giV3 iT 2 U, Ur a J3nius U dick
Sinbad025 2 years ago
This has been flagged as spam show
I invite you to come see my little animated video made with a can of pepsi ... Thanks for the visit.
oldimeubs 2 years ago
now you should get it to pick up the stack and drop that
reubyjay25 2 years ago
dang it! its better than me at it!
animatemaster 2 years ago
Well, it's a robot... It can do the exactly same thing countless times, human cant.
topitapi 2 years ago
yes but it cant adapt as well to random errors - e.g. if one can was slightly weight biased and the tower was toppling to one side, the human would probably outperform this robot at that point.
RjbsNXT 2 years ago
make it it stack cans of nitroglycerin
:3
abduction03 2 years ago
make another one that takes the cans from the top :P
moltanem2000 2 years ago
ok, one tip. Otherwise its perfect. Change it in some way so that the machine adds a can to the top instead of lifting the whole stack. That way you can stack higher and without it all falling over sometimes.
Dominoe11112 2 years ago 2
If it would stack on top, it would not be able to go higher, as the height of the machine would limit how high it could stack. The way it's built now enables it to keep on stacking untill the machine can't lift the weight of the stacked cans anymore, or when the cans hit the ceiling. I think making the grabbing of the cans smoother, and the placing on top of the new can a little bit more precise would make this system perfect
kettling 2 years ago
Yes, but with this machine. Try it yourself. Stack empty cans, once you get to about 5 or 6 it gets very hard to keep them from falling over. Now try it again, but add them to the bottom. It is even more hard, maybe 4 or 5 until they start leaning dangerously. I really think that you would be able to make the machine stack higher if it were to add to the top. I cant try since i dont get an RCX for another month but once i get it i will do i good demonstration.
Dominoe11112 2 years ago
will this work with other types of cans, for example, soup cans?
terroriticus 2 years ago
how high can this go?
GuiLingKwek 2 years ago
can it lift full cans?
Eigdooog 2 years ago
very funny XD
Superarkboy2 2 years ago 3
nice!!!! i made a elavater out of 1 of thoes
thatsbullman 2 years ago 2
Amazing !
iRouRoui 2 years ago 2
thats awesome
wanderoustree 2 years ago 2
good for stephen hawking when hes alone in his kitchen but otherwise useless, genius though!! good job
LuViNsP 2 years ago
What happens if you take the last can out?
Minifig666 2 years ago
now unstack it
thegoof529 2 years ago
This has been flagged as spam show
jugglingjoe101 2 years ago
Hey Foxbox61, what version of the RCX are you using? Do you own any other kinds?
BunnyEatCarrot 3 years ago
WOW
hojib6 3 years ago 3
cool but useless
legoty10 3 years ago 29
@legoty10 Its not useless at all! Just make the belt longer, have it run from your living room to your bin. Have a coke. Put it on the belt, make the stacker chuck it into the bin or something.
ThatWasKindaQuick 1 year ago
@legoty10 Does creativity need to be useful?
Xatore 8 months ago 3
Lol, this has no use what so ever but it's good.
stanni1992 3 years ago 3
All it needs is a huge crusher ontop to flatten them!
EyesOnMeStudios 3 years ago 35
@EyesOnMeStudios Very possible with the power of legos pneumatics
goodbyeash 1 year ago
i don't get the function of that thing build out of red bricks and those blue things on it =S
ectoproduction 3 years ago
it's pneumatic pump air container that powers the machine to lift the containers.
TheWolf244 3 years ago
Ooh thanks, and btw, are the pneumatic pumps also from lego??
ectoproduction 3 years ago 2
yep
TheWolf244 3 years ago
it houses the pneumatic piston air tanks. the motor compresses the air and it is stored in those tanks. then when needed the air is despensed to the pneumatic pistons.
Dorpinghaus2 3 years ago
They are air tanks for the hidrolics
Pokemuma 3 years ago
There pneumatics you idiot.
Minifig666 2 years ago
you can make it do that wow
Nich711 3 years ago
cool. I have an NXT and Robotics invention system
runemasters5895 3 years ago
omfg sweet
sadsparky 3 years ago
wow, how high can that stack? before they get to heavy or unstable?
iCONICAACINOCi 3 years ago
Very useful, if you drink a lot
tk10 3 years ago
hope you didn't drink all that in one day!!
corndog67223 3 years ago
u sould try it with filled soda cans lol!
DARKTDOG 4 years ago
are these little electronics like mini plc's?
and are those motors and stuff all made by lego??
zackscriven 4 years ago
yep, everything (exept the cans) is LEGO. This is the "old" robot kit Mindstorms with RCX computer brick. Today Lego has a computerbrick call NXT
foxbox61 4 years ago
oh thats tight
zackscriven 4 years ago
cool
andrewlego9 3 years ago 6
yes
ectoproduction 3 years ago
omg thats sop cool
Lordnakki 4 years ago
doode thats awsome
how do you make that stuff? is all the parts lego kus i dont get the generators and sutff
and the clampers
clickclackjp22 4 years ago
will it work with full tin cans??
wurft 4 years ago
No. The gripper is not powerfull enough. There is already a problem with empty cans... that's why i taped them (the purple line), so they could not slide down. I also think the carrousel is not powerfull enough to circle full cans..
foxbox61 4 years ago
i did not see the purple lines but now i see theme,
thanks!
wurft 4 years ago
@foxbox61 u put a little in the bottom though because the sound isnt light enough
THEdeterminationX 1 year ago
wow,a bit brutal when it grabs the stack but wow
hboyce4 4 years ago
Thats an innovative way of making conveyor belts!
ArkitekturaMecanics 4 years ago
whoooooow
14wasp 4 years ago
sweet
cartuner555 4 years ago
You should make a can crushing machine.
thegunnerfromh 4 years ago 2
Janga!
jonnda 4 years ago
a new way to build skyscrapers eh?
carl0071 4 years ago 3
cool!
diniy7 5 years ago
for all your can stacking needs
john1984h 5 years ago
How high can it go?
Heckytorr 5 years ago
this is the maximum. higher would probably force me to use flat magnets. hahaha
foxbox61 5 years ago
i really like ur machine
Im4evernarutofan 5 years ago
? Cuando tiempo libre es possible tener ?
Sjarke89 5 years ago
yes, i have to much spare time (in the winter)
foxbox61 5 years ago
Tin can stacker
peretz36 5 years ago
Dat viel mij 100% mee. Ik had als backup plan om aan de onderkant van de blikje een platte magneet te plakken, maar dat was dus niet eens nodig. Wel staat de paal lichtelijk uit het lood...
foxbox61 5 years ago
Toch knap dat 'ie de blikjes zo stapelt zonder dat de stapel omdondert.
bendejonge 5 years ago
nice
evildarkangel666 5 years ago