HOW TO POLISH THE ENGINE ON YOUR CELICA

[MrBansheeguy]

Hey i was wondering if the celica 2zz intake manifold were smooth compared to the on my 2004 matix xrs? mines cast

[MasterThug]

THIS IS SOOO HARD TO WATCH, LIKE A GANG BANG WITHOUT A WOMAN

[czf21]

I wanna give this a try for my gts

[96Rolla]

hmm for some reason i think i saw this car the the Chino Hills meet in 2010, i was with my friend that has a blue celica with Blue tinted headlights

[subzer0l]

looks good

[diastypeR1]

what products do you used?

[Sp33dyD3m0n]

1 comment and 1 question. Comment: I like the headlights, I noticed the red bead around the lens, did you customize those because I havent seen any with that feature, just colored and mirrored but without that extra touch. Question: Did you fabricate the cover or was that bought? Where could I get one?

[GR3ML1N0]

@Sp33dyD3m0n the head lights are the tsunamiedition and the cover is made by Injen, try Modacar or monkeywrenchracing

[TRDboi85]

good job on the polishing. 2zzge ftw!!

[thevoices88]

its a metal cover, prolly aluminim, n it is possible to get the engine to shine like chrome the way he did. its the same (roughly the same anyways) way they do it if u take it to a shop to have ur rims polished or valve covers. dont be dissin on him cuz ur too stupid/lazy to do it urself great job by the way though

[stimmty001]

the cover is from injen and very expensive.. not only that it doesn't completely cover the valve cover which is why he didn't have to remove it cause the cover is usually a plain stock black plastic,,, not metal... so he had to purchase that part to match the look he wanted... just to show that you can do this yourself with some hard work.

[brendonthegreat]

Wow what a bunch of fucking tossers, you can clearly see that the part he polished is visible after the cover is fitted. Pay attention, the cover is over the shitty looking pipes and leads not the manifold ya cocks.

[RaNdYbOlLcKStAiN]

you are a thick fucker why polish the monafold and then put a plastic cover on it

[skullheaven]

and tell me why you didn't take the intake maifold and valve cover off and do this?

[GR3ML1N0]

It wasn't planned at all!

[celicatjen]

hello, to bad you can see its a cover that is in plastic chrome that is put over, greets CeLiCaDrIvEr belgium

[GR3ML1N0]

the cover was installed after polishing the Intake manifold and it is not Plastic.

[flmesofarmdgdn]

@GR3ML1N0 yea man, i have that valve cover too.it gives ur car a nice look.I was wondering where you got the hose kit tho.I was looking into switching out the hoses,the only place i can find is hose techniques,they say thats the only one that is worth buying.can i know where u got dem from? thanks man.btw i have the spark plug cover too,but where did u get da middle part of it?

[cncmotorparts]

The only bigger waste of time I can think of, other than doing this is watching you do it lol

NOBBULATER. GET A JOB AT WOODSPORT , HE NEEDS LACKY.

[cncmotorparts]

The tool was the one doing the polishing.

Does this shit make it go better?

The MUSIC SUCKS A BIG DICK !

[gtdodgeviper]

I like the beat but the song sucks

[cncmotorparts]

SUCKED A BIG ONE!

[leeyangkiller]

where can i get the polish n tool...i where can i buy it....

[GR3ML1N0]

everything was by hand I didn't use any tool. the polishing material you can get it at eBay, that's where i got mine from.

[leeyangkiller]

hey where can i buy those polish n tool...i need to polish my...where can i get it...n how much it run

[Morris65]

Que es el nombre de artista y cancion?

[Gitsittin]

Damn niceee bro, Where did you get the polish at ?? I def want to do this to my celica !!! Please tell me !!!!

[celicaturbor1]

hola si me puedes dejar tu direccion de correo para hablar?? tengo este mismo coche y me gustaria hacerle lo mismo en los colectores de admision!, veo que la lija es al agua de grano mil y la vas rociando con agua poco a poco no?? pero ahora viene mi gran duda!? el producto que le hechas despues para dejarlo al estilo de cromo, cual es?? creo no poder encontrarlo en españa...

[celicaturbor1]

hablas español?? tengo unas preguntitas para hacerte. un saludo y se ta quedao de putisima madreee!!!

[GR3ML1N0]

Claro!

cual es tu pregunta?

[fellafoofoo]

but your not too lazy to sand and polish for 2 hours and then put the cover back on because it looks shit

[GR3ML1N0]

it looks like your face!

[andreySC7]

LOL :))))

[07wtc]

i know...the op never showed his real finished product. When polishing is done right it is not a fast process.

[RaeneyDae]

opps ment  Aeroworks thanks for eveything

[RaeneyDae]

i think i will just buy the Injen carbon fiber covers for everything =/

[GR3ML1N0]

Injen does not make the covers on carbon fiber.

[RaeneyDae]

well i just looked and my celica's engine has a cover all around it do you know if it would cause problems if i took the covers off and left them off?

[GR3ML1N0]

yes, you have to remove the plastic covers.

i replace mine for the Injen covers, you can also paint them any color you like.

[RaeneyDae]

ok thanks so did you take you engine cover off?

[GR3ML1N0]

no, i didn't have the tools and I'm too lazy to do that.

[RaeneyDae]

what are you doing at 0:27 ?

[GR3ML1N0]

Applying the truck polish thing.

[salmanz8]

FAKE ! can beleive just wasted 1min 57 secs of my life + the time spent writing this comment

[GR3ML1N0]

just do it, it really works i have done it on 4 cars.

[deathro45]

Dumbass...

[bluesteal0]

lol too bad he doesnt know anything about colors and how they reflect and absorb heat. If he did he would have colored his engine black. Now the engine will become hotter and waste gas and HP

[g35mt6ip]

LOL...Beaner trick at its best...

[bloodseedrums]

well this is gay

fukin faker

[fastassevo16g]

wouldnt most take the cover off and use a buffer?

[GR3ML1N0]

yes, i just don't have the tools to remove the cover.

[fastassevo16g]

you dont have a socket wrench?????

also if you do it the cheap was alwayz sand in swirls... never stait leaves uneven surface and lines...

[termena]

do you know name of this song ??

[toyo26]

Tres joli!!

[ksig419]

pointless there is an engine cover on it in the end of the video head was never polished if it was then they screwed it up and put a cover on it to make it look right

[GR3ML1N0]

Well don't do it then!

[2012nutcase]

you can do a better job if you take the cover off

[drmrdan]

wait so all u used was 1000 grit?

[GR3ML1N0]

yea! water and the polish thing!

[beesting2008]

its a load of sh*t the end result shows a chrome engine cover which is a plated finish not a hand polished finish! rubbin the rocker cover down with some p1000 wet an dry isnt gonna b good enough for polishing! hence why u never see the rocker cover when its finished! But if i'm wrong we'll see another vid of it to prove me wrong!?

[MarsManJR15]

@beesting2008 If you look closer the cover is only between the valve cover and the intake runners that he polished, where the rubber separator and the wire looms are. And ther'es a separate one for over the spark plugs. Watch and look alot closer you can see the runners and the valve cover are deff. not covered so they R indeed polished.. I thought he was taking credit 4 what he didn't do too but u and the 5 thumbs up r wrong this time. And u can polish a decent finish after 1000 grit

[glenbarnett]

Ooohhh... bling!  Bet that added a whole 200hp.

...pointless.

[P3ngyy]

His headers are already polished. When he was sanding the head it was pointless, because at the end of the video you can see a chrome head cover newly applied to the engine bay.

[GR3ML1N0]

you don't even know what a header is!

that is the intake manifold.

[P3ngyy]

Okay go on google images and type in headers. I'll make this easy for you, they look like little snakes you still probably color in your animal kingdom coloring books. Now scroll to my msg and notice how I said they are already polished. Now go look up Engine Head on google. Which is what he's sanding, It's pointless. Now look on google for "Engine cover" - Oh what do you know, I know my Sh*t.

[HAHAiworkatquiznos]

You know your ish huh? so how about explaining why there is a FUEL RAIL RIGHT ABOVE YOUR PROPOSED "HEADERS." I don't even know much of anything about the 2ZZ, but i do know that most engines don't spray fuel into the outgoing exhaust gases. Good try.

[ADonathan]

wow ypu my sir have just won the Darwin award

you fucking retard

[HAHAiworkatquiznos]

you kinda need to die for that....but i agree

[kevman77]

Every car has intake AND exhaust headers. Exhaust headers are commonly known as extractors.

[Collegeguy87]

LOL, doesnt even know what a intake manifold is LOL. Yes it is that simple, but i probably go up to 2000grit. Stop hating stupid kids. it really is that easy.

[drmrdan]

lol. okay go on google and look up 2zz-ge. u will c that the intake manifold is what he is polishing. header is on the back. better do more research before running ur mouth about u appositely knowing ur shit.

[andallweretaken]

are you spraying water while sanding?

[alexjalaff]

yea, to aviod deep scratches

[EOzz]

big work done, nice ;)

[WIIAdrian24]

IT'S FAKE!

[terrancoleman]

nice how much scubbing should i do

[GR3ML1N0]

until you see it smooth, no scratch, no paint, and them apply the polish thing.

it will take you like two hours.