@TheAgosDimi why would you buy one of these now? these things are two years old and you got the gtx 295 and the new gtx 480 that will demolish the 9800 gx2...
hey i had the 9800GX2 xxx GFX card and it blow up , so am getting a new 1 in 3 weeks , but this time i want 2 get watercooling for it but cant seem to find that block do u know anywhere i can buy 1 ?
Riva Tuner is a great app Ive been using it for a long time, it helps somewhat but Ive decided to ditch the fan cooler and get this koolance water block, my problem now is what kind of water cooler do I get? I had my eye on the Thermaltake Bigwater 760i but I just dont know I have never done water cooling before.
I have the exact same problem my 9800 gx2 tops out at about 95C when playing crysis, so im getting this, but i have one question would the type of water cooler im using have any impact on temps? what would you recommend?
i would not no that because rivatuner just increases fan speed and it also makes it seriously loud and believe me it sound exactly like a vacuum cleaner!!,not only sound,the fast spinning fan create alot of vibration and its also annoying,but give it a try,it will offer some cooling..
alright thanks...i actually got a different video card now. the sapphire 4870x2 2gb...bought it brand new for $300 after shipping and tax it cost exactly $300...ebay is awesome lol
I was told that i would need a 360mm rad in order to pull it off, the only downside to that is that i very much doubt this pump would be able to handle it. Is a 240 not enough?
Hey, i have searched all over the net and found no results. Basically, i wan't to know what is required to watercool a GX2, i have an XSPC Delta V3 watercooling kit, with a 240mm rad, i would love to be able to run my GX2 and 4 ghz E8500 on the same loop, but i am very confused on what is actually needed!
if you mean the graphics card case than no, but since you have water cooling when you have put this on, it isnt nessary to have a heatsink, plus its not big enough to cover the graphics card and the water cooling
i have alot of questions , all this names that i have encountered , palit , xfx , evga what do they stand for why all this names , and is asus better then all of em , and what setup do u have in this computer ? , and do u know the absolute best video card out there by this date ??? that u could use 3 way sli or quad sli or sli or whatever , plz tell me :)
Something I might add is that, you DO NOT put thermal compound on the PCI-e chip even though the instructions tell you to, it won't touch the water block! you need to put a thermal pad on it. you can look and see light right between it and the block. I hope this helps save somebody from doing it twice like I did.
im just wondering why all the folks that water cool these cards dont put the shroud back around them...is there any reason other than just to be able to see the water block?
what kind of fitting & nozzles did you put on that 1st card thru the 2nd one?it was realy neat how you put it 2gether....want 2 copy it,No!i need 2 copy it!
You just change the LED's.. Is'nt much of a work! ;) Make sure the LED's are the same voltage! It might happen that you need to mount some few resistors in there.
You should be able to fit a sound card between the vid cards providing your mobo has a Pci-e slot available. pause the vid @ 6:50...and you can see the available slot on a 780 / 790i 3 way SLi board. thanks
i was worry because i have the X-Fi Titanium Fatal1ty Professional :)and im thinking about getting waterblocks for my 9800gx2 but the waterblocks i think i will get the danger den seems they are made from copper which its more conductive :) but i think i wont fit :( because they have different fittings =/ but anyways i may get either danger den or koolance :)
gtx 280 probably will be a lot easy, cause it have just 1 gpu, which make the chassis more easy to open and do what you want to do. If i has one i'll do it for you, but i don't. Try to find who allready has one.
Hey trubritar you are running those cards on a single loop are you not? If so what kind of fittings are you using t or y or something else I don't know about to connect them both to the loop?
THE R680 aka 3870X2 card architecture is completely different from Nvidia reference cards not including chipset sizes, i was generally referring to the card series in question.
i want another card with this :(
wakkatidus1234 7 months ago
thanks for this vid, I lost my guarantee a few days ago (expired) so I'm finally free to mess about. I may just do this.
JFSOCC 9 months ago
You sound like Edward Norton :D
XxWindShadoWxX 11 months ago
o
m
g. . .
mind exploded!
aquasteam 11 months ago
ABSOLUTELY PHENOMENAL!
philhalo66 1 year ago
Epic video Card!
VideoBlogs2012 1 year ago
fuck dat bullshit. don really understand 1.18. how has he done that? i ve broke my card...: //
feel90one 1 year ago
where could i buy this vdeo card and its waterblock ?????could i fine them in greece?????????? or i have to order them from somewhere else???
i am new in the ps' and i want to make my own computer...
TheAgosDimi 1 year ago
@TheAgosDimi why would you buy one of these now? these things are two years old and you got the gtx 295 and the new gtx 480 that will demolish the 9800 gx2...
Rrichthe3 1 year ago
@Rrichthe3 My 9800gx2 just burned up, you'd recommend those as a suitable replacement? All i use my comp for is online gaming.
eeezymoney 1 year ago
@eeezymoney oh yeah, if you want a card that run flawlessly, you should buy they gtx 470, its 3d ready, it has 1.5gb of ddr5 and its a fermi card.
Rrichthe3 1 year ago
@Rrichthe3 sweet, thanks for the reply.
eeezymoney 1 year ago
I am new to water cooling and have a question?
Would the cooling be more effective if the in ports and out ports were hooked up in paraell instead of series? Like you have.
The reason I asked is the first video card water in then out you have warm water going into the second card then out again.
menahunie007 1 year ago
hey i had the 9800GX2 xxx GFX card and it blow up , so am getting a new 1 in 3 weeks , but this time i want 2 get watercooling for it but cant seem to find that block do u know anywhere i can buy 1 ?
JOHNNY22522 1 year ago
is it possible to run a 9800 gx2 and a 9800 gt in sli making triple sli?
splice247 1 year ago
I live in serbia and I have 2 of these card... cant find watterblock for these cards here :'(
rajko666 1 year ago
you were really boring back then
Trentonater47 1 year ago
where is your accent from i cant figure it out?
duckpk10 1 year ago
:( no water block?
ipwntehmagik 1 year ago
is it possible to buy this waterblock anymore?
ipwntehmagik 1 year ago
@ipwntehmagik : yes, i have one available if you need one :)
trubritar 1 year ago
@trubritar I sent u a pm about it :)
definitely interested
ipwntehmagik 1 year ago
@trubritar im definitely interested in that - i sent u a pm about it :)
ipwntehmagik 1 year ago
@trubritar You wouldn't happen to still have one of these blocks would you?
TheElMoIsEviL 2 days ago
@ipwntehmagik i need one
georgebrett1001 1 year ago
WILL IT FIT ON EVGA 9800GX2..?
loybulol 1 year ago
Shouldnt be any differences in the hardware
Dayfox3050 1 year ago
cool
sezginkingkong 1 year ago
This has been flagged as spam show
Miley Cyrus Sex Tape
offto. net/mileysextape
alyn236 1 year ago
haha id watch this guys videos just cause his mad voice lol
zJudge12 2 years ago
Is that a Cosmos S in the background?
aeg12p 2 years ago
Comment removed
LLOYD19851012 2 years ago
where can to buy this WATERCOOLER ???
ichweisnichtwas 2 years ago
This comment has received too many negative votes show
it's 550w corsair enouge for the 9800gx2??
uxb546 2 years ago
google the min wattage for the 9800
dardraa 2 years ago
minmum 580w power supply
PBBraden 2 years ago
@uxb546 no - go for a 900w ish.
50CENT123GO 1 year ago
@uxb546 yeah its minimum needed is 500, i dont understand why people rate u down :S
woodshuck 1 year ago
This has been flagged as spam show
google is your best friend
sukmyback 2 years ago 4
spent a lot of time trying to find the price,...where's a kit? Why so hard to find? Wha?
slackrivet 2 years ago
where can i get me one of these waterblocks plz respond.Thanks
Aidin8tor 2 years ago
and i have 1 will be here in 4 days :D same make and model
sneakybadger 2 years ago
Riva Tuner is a great app Ive been using it for a long time, it helps somewhat but Ive decided to ditch the fan cooler and get this koolance water block, my problem now is what kind of water cooler do I get? I had my eye on the Thermaltake Bigwater 760i but I just dont know I have never done water cooling before.
SkierDudeCC09 2 years ago
I have the exact same problem my 9800 gx2 tops out at about 95C when playing crysis, so im getting this, but i have one question would the type of water cooler im using have any impact on temps? what would you recommend?
SkierDudeCC09 2 years ago
Look up an app called RivaTuner, it allows you to crank the fan speed up. Think its only 70% by stock.
BIGBC89 2 years ago
i would not no that because rivatuner just increases fan speed and it also makes it seriously loud and believe me it sound exactly like a vacuum cleaner!!,not only sound,the fast spinning fan create alot of vibration and its also annoying,but give it a try,it will offer some cooling..
Vinn36legends 2 years ago
go to a watercooling forum and ask
chumbucket843 2 years ago
I can`t get the back of the card off... the white molex is in the way. I`ve screwed all screws out.
Applebee0 2 years ago
OMG how mutch for your pc ?
engineersp 2 years ago
my 9800 Shut down since it hit 100 degrees so im looking into this
sneakybadger 2 years ago
This has been flagged as spam show
Look up an app called RivaTuner, it allows you to crank the fan speed up. Think its only 70% by stock.
BIGBC89 2 years ago
Comment removed
sneakybadger 2 years ago
that sounds great!!!
chunyin2003 2 years ago
does this waterblock work with the EVGA 512-P3-N884-AR geforce 9800 gtx+ 512mb superclocked video card?
xLinkinPark209x 2 years ago
no sorry
SPLITZRZR 2 years ago 2
alright thanks...i actually got a different video card now. the sapphire 4870x2 2gb...bought it brand new for $300 after shipping and tax it cost exactly $300...ebay is awesome lol
xLinkinPark209x 2 years ago
the tubes are for water cooling its better than air
ki11joy92 2 years ago
jaja funny intro
jlddd123 2 years ago
This is badass man
nitrousboy0311 2 years ago
Nice!
designd007 2 years ago
can u show how to install that on a XFX 9800 GTX+ pls and where do i buy that coolance
mackie2k6 2 years ago
verrrry nice
vinny4punt0 2 years ago
Thats what i mean :P ofc the fans on the radiator make sound but they mostly make less sound then your normal GPU fans...
raouldijksman 2 years ago
whawo..looks sik
CrazyJimKU 2 years ago
that water cooling will fit on EVGA 9800gx2?
loybulol 2 years ago
I dont see why not
NYPD545 2 years ago
Oe la la, verry nice.
Thank you for this video.
Now a can try this to my own card.
Greats mrfkanzi
mrfkanzi 2 years ago
Hello! I have short question about this GPU watercolling: how about a noise? Is that loud or louder as normal fans? Sorry about my bad english!
SolidGamerFilms 2 years ago
This doesn't have a fan.... its uses water and not air so no need for fans....
raouldijksman 2 years ago
This has been flagged as spam show
Wow what a sexy video. Please compare this video to my video at my channel... Please let me know what do you think also..
Hot Wanda
hotwanda69 2 years ago
Nice. Yust 45C seems little high I have EK Waterblocks watercooled 9800gx2 and overcloked under load is 35C
smuc20 2 years ago
holy fucking shit...
Marazuga 2 years ago
did he use 2 graphic card??
AbeNicxs 3 years ago
the 9800 GX2 is two 9800GTX+'s joined together, to create a single card. Much like the HD 4850 X2/HD 4870 X2.
weirdfaceguy 2 years ago
I think a single GTX 295 is faster then these in SLI. That card is stunnnnnning!
MugenRac1ng 2 years ago
I'm sure it is, those things are monsters atm.
The 9800GX2 isn't as bad as people think it is tbh :P
DCDUO 2 years ago
yes it is sli, but remind yourself that a gtx 295 has GPUs. thats why when you hook up 2 its called Quad-SLI.
k001k1dzm4n14 2 years ago
Already knew that. But you buy it as 1 card init!
MugenRac1ng 2 years ago
id say its more of a 9800gt, its got the same clocks.
Younowkoed 2 years ago
that's great! thanx.
nrasandun 3 years ago
thx for the video, greatly helped. now just waiting for your video on a water block for the gtx 295!! :)
wcoldschool 3 years ago
very nice and humble,thanks for the vid
icrushu 3 years ago
thanks that's help :)
lakoza77 3 years ago
Great vid - just have to find out where to get one in Australia - and I don't have a hot glue gun :)
Ryzza5 3 years ago
Post #2
I was told that i would need a 360mm rad in order to pull it off, the only downside to that is that i very much doubt this pump would be able to handle it. Is a 240 not enough?
Any replies are much appreciated.
DCDUO 3 years ago
Hey, i have searched all over the net and found no results. Basically, i wan't to know what is required to watercool a GX2, i have an XSPC Delta V3 watercooling kit, with a 240mm rad, i would love to be able to run my GX2 and 4 ghz E8500 on the same loop, but i am very confused on what is actually needed!
DCDUO 3 years ago
those cards get so hot! I got rid of em and got 280s.
slyslus 3 years ago
the best video card is the nvidia riva xDDDD ;-)
xXRafa193Xx 3 years ago
128 zx you mean
konzerteloco 3 years ago
i was thinking that it has to run about 90c and needs water. good job. try it out on the gtx295
pyromonster99 3 years ago
i hope installing the WB for the GTX 295 will be a tad bit easier.
dylanofwomen 3 years ago
is it possible to put the case back on
darkbladegamer666 3 years ago
if you mean the graphics card case than no, but since you have water cooling when you have put this on, it isnt nessary to have a heatsink, plus its not big enough to cover the graphics card and the water cooling
liascm 3 years ago
i love it i really did it was good
thegundamking 3 years ago
trubritar giveaway, tell me about it
Ifunc 3 years ago
How the hell do you "gently pry the case apart"? I took all the screws out but it doesn't just come apart, it feels like its gonna break!
BloodyHarvest 3 years ago
And memory chips???
Thermal pad?
Febbre46OnlyForRossi 3 years ago
This has been flagged as spam show
I just uploaded some sexy videos of myself from my webcam;)
HornyMilena 3 years ago
This has been flagged as spam show
REAL PORN ----> XXXAdultTube[.]com
renne1345 3 years ago
i have alot of questions , all this names that i have encountered , palit , xfx , evga what do they stand for why all this names , and is asus better then all of em , and what setup do u have in this computer ? , and do u know the absolute best video card out there by this date ??? that u could use 3 way sli or quad sli or sli or whatever , plz tell me :)
klantarN 3 years ago
All i know it if you go nvidia evga and xfx are the way to go :P
heared xfx is going to make ati's too cuz i think ill go ati when i get bored of my gtx 260/216:p
Thekilldevilhill 3 years ago
Something I might add is that, you DO NOT put thermal compound on the PCI-e chip even though the instructions tell you to, it won't touch the water block! you need to put a thermal pad on it. you can look and see light right between it and the block. I hope this helps save somebody from doing it twice like I did.
fpsraab 3 years ago
I love the way Trubritar talks!
meticadpa 3 years ago
XFX/EVGA/others should make factory made watercooling editions, except, still with the casing, just different by pipe intakes outtake holes.
Younowkoed 3 years ago
My God what have you done!!!!
Scorpion7substance 3 years ago
im just wondering why all the folks that water cool these cards dont put the shroud back around them...is there any reason other than just to be able to see the water block?
bart4111 3 years ago
some people do but the main reason for leaving them off is HEAT, even with the factory fan and heat sink it drops temps a lot.
fpsraab 3 years ago
thank you very much for this great video.
next week my watercooling block will arive, this video helps me for sure.
Aanthanur 3 years ago 2
nice, very clear video.
ES5SEVEN 3 years ago 2
great video. i'm really impressed. two thumbs up
yapchapco 3 years ago 3
can you still do this on the 9800 GTX+
?
koalabear2 3 years ago
Its not the same waterblock.
ChIkEnAtEmYdOnUtS 3 years ago 2
what kind of fitting & nozzles did you put on that 1st card thru the 2nd one?it was realy neat how you put it 2gether....want 2 copy it,No!i need 2 copy it!
busuo109 3 years ago
im really thankful i came across your vid by accident, it was really helpful...tnx agen!!
busuo109 3 years ago
Check out my Pink Friday video! help support a good cause!
firestormcomputers 3 years ago
I am not a huge fan of Koolance... well untill now lol :D
Thanks for the video!
WrittenByMyDog 3 years ago
It's Incredible
Fantastic
kazasok 3 years ago 2
I still have 1 of them....
trubritar 3 years ago
can you do it without installing the LED lights? i dont like the LED lights anyways. I got a red color theme on my PC
j4nm1k3 3 years ago
You just change the LED's.. Is'nt much of a work! ;) Make sure the LED's are the same voltage! It might happen that you need to mount some few resistors in there.
TheLastHybrid 3 years ago
that was really cool
kaulogiatros 3 years ago
HOLY TITS!
RussianInquisition 3 years ago 3
subscribed awsome !
Onlytakes1 3 years ago
Thank you for the video.
voronoboi 3 years ago
ha ha ha ha
aristo48 3 years ago
dude your rigs are fucking monsters
subscribed!
CrdBrdProjects 3 years ago
i cant get my led's to work! on both koolance blocks set. and they are conencted where the fan connector would be at.
Willalvers 3 years ago
If the LED's don't function, contact Koolance and initiate an RMA, they will ship you out new LED harness pretty quickly!
Trubritar
trubritar 3 years ago
this is probably a stupid question but is this compatible with other 9800 gx2s? mine are evga
crazeecouga 3 years ago
with all 9800gx2's
fpsraab 3 years ago
i ment i idled at 60 and now laod at 49 i loaded at like 85 c
wzZzxXxzZzw 3 years ago
ah i see so it made a huge difference then. i got yah, never had mine on air so i was going off of what i heard from somebody else.
fpsraab 3 years ago
This is compatible with all nVidia 9800 GX2's.
It doesnt matter whether its EVGA/XFX/GeFORCE/ASSRAPE/BACON/ or anything.
RussianInquisition 3 years ago
Bacon graphics would rule everybody loves bacon!lol
Valentino319 3 years ago
i loled
n11lc 3 years ago
do you think a pci-e sound card will fit between both cards with waterblocks?
thanks
lokito919 3 years ago
You should be able to fit a sound card between the vid cards providing your mobo has a Pci-e slot available. pause the vid @ 6:50...and you can see the available slot on a 780 / 790i 3 way SLi board. thanks
trubritar 3 years ago
wow thanks man for your answer :P
i was worry because i have the X-Fi Titanium Fatal1ty Professional :)and im thinking about getting waterblocks for my 9800gx2 but the waterblocks i think i will get the danger den seems they are made from copper which its more conductive :) but i think i wont fit :( because they have different fittings =/ but anyways i may get either danger den or koolance :)
lokito919 3 years ago
hey do i need a 2 space or a 3 space peice to go in between my gx2's? like the metal bridge conctor? thanks
toatq 3 years ago
toatq,
You will need the following items:
(1 pair) Koolance NZL-LXG22
(1) Koolance CNT-VD3
Have fun
Trubritar
trubritar 3 years ago
hey man just spent 900 CAN on a koolance kit man thanks
toatq 3 years ago
can you do same thing to GTX 280?
zingmars 3 years ago 3
yes...the install video is already out there...
trubritar 3 years ago
gtx 280 probably will be a lot easy, cause it have just 1 gpu, which make the chassis more easy to open and do what you want to do. If i has one i'll do it for you, but i don't. Try to find who allready has one.
Thanks
xcaninox 3 years ago
did u find and decrease un temp THANKS
toatq 3 years ago
i love the leds 2 bad its only for gx2
SPLITZRZR 3 years ago
love ya vid bro, watched it a couple of months ago, and now i'm interested in buying a 9800GX2. where do you purchase the koolance waterblock from?
V3NOMDAWG 3 years ago
hey bro, i wanna thank you for helped me with "How to open the CHASSIS", anyway thanks a lot.
xcaninox 3 years ago 2
Great work. Thank you!
avinatbezeqint 3 years ago
NICE JOB trubritar
friedric 3 years ago 2
HIS VOICE.
IT KILLS
ieldra 3 years ago
Great work. :)
melonhead28 3 years ago
Good job man :) anymore Rig's your building soon? :)
Hekynn 3 years ago
Theres too many screws for that card. 24 just holding the cards together.
ryanoghlan 3 years ago
Damn it I totally forgot the graphic card, I only bought the watercooling...
maitrelame2 3 years ago 3
i like the sound that comes out when he opens his mouth...
samaow 3 years ago 2
nice work man!
SaverSST 3 years ago
And that is how we make a 9800 GX2 waterblock sandwhich =P
dragon55001 3 years ago 2
LOL!
Arthurb06 3 years ago
LULZ
RussianInquisition 3 years ago
Nice, very effective, thats all i needed to know. Thx for the video.
Anapwntian 3 years ago
will u do one for a 4870x2 when a waterblock comes out plz :)
tombmxcrowley 3 years ago
Already working on it!
Trub
trubritar 3 years ago
Nice rig man.... And great video, short and direct.
Denso2131 3 years ago
nice tutorials
and your computer has 2x9800 gx2???
wow ;)
Fraggerbee 3 years ago
Oh yeah regarding my last comment could you tell me how?
musclehngry 3 years ago
Hey trubritar you are running those cards on a single loop are you not? If so what kind of fittings are you using t or y or something else I don't know about to connect them both to the loop?
musclehngry 3 years ago
Very informative video. Great performance as well. 45C on a 9800gx2 that is impressive!
BababooeyHTJ 3 years ago
i seriously wouldn't want that in my system, look at the kip of it!
dieumank 3 years ago
could you cut some holes for the tubes and put the steel cover back on?
adsssssfgjjjjj 3 years ago
dude i think u can... that's a very good idear
R4Zy3L 3 years ago
Seems going arbitrary and pointless but, I guess that's possible. Probably a little bit of a bitch to put back together but that's personal lol.
Maybe someone will try it <:
SheepStone 3 years ago
that shit looks nasty, they should have made a cover fo it with some slots for the waterblock
beanbag1985 3 years ago
it must have taken him months to plan this
souther 3 years ago
ur fucked up lol
Omellykim 3 years ago
omfg thers actualy two cards LMAFO.
I just thought there was two chips i didnt know there was two individual cards
FSDU5 3 years ago
how would they put 1 gig of video ram on 1 card with 2 chipsets?
TheBlitz1 3 years ago
ATi did it with the HD 3870X2
Zeldafreak131 3 years ago
THE R680 aka 3870X2 card architecture is completely different from Nvidia reference cards not including chipset sizes, i was generally referring to the card series in question.
TheBlitz1 3 years ago
I wont trust my self doing this xD lolz
0dxd0 3 years ago
lol i wouldnt do that stuff with a 400 dollar card.
Altec0Lansing 3 years ago
yer i just want the money he has to spend on a dangerous operation on the card lol
deaniture 3 years ago
more like 800 in aus
gremlinkiller 3 years ago
Its not dangerous if you know what your doing. Its pretty easy actually AND the overclocking benefits are well worth it.
pr0n3