hi does any one know how to get a vtr to rev up to 8thousand? mine only goes touching the 7mark? so would i have to get a race manifold etc?? because someone was saying that the limiter is in the manifold is that true?
thats what my mums saxo sounds like but my mums bf put on a 200 quid racing exhaust on it and put newer cams in and carved all the head inside and replaced the oil with very expensive oil... having decent cams in does make a avery big different especially with amazing spark plugs ;)
mate with a cam you should be able to rev this beast a bit higher than that. what you mean its not sure after 6k ...........HELLO> your cam comes on play at about 5500rpm.
looking at this video, seems cams are a waste on vtr's lol mine is probably just as quick as this one...
danellis92 4 months ago
hi does any one know how to get a vtr to rev up to 8thousand? mine only goes touching the 7mark? so would i have to get a race manifold etc?? because someone was saying that the limiter is in the manifold is that true?
MrMagicbeans69 9 months ago
get a 1.8T golf and remap it from 180bhp to 220bhp like me, better than fafing around with cams and exhausts
jasonf81 1 year ago
@jasonf81
Golf is 180Bhp and 1280 KG Power at Flywheel (BHP) : 180
Weight without Driver (KG) : 1289
Power to Weight Ratio (BHP Per Ton) : 141.88
16V 106/Saxo
Power at Flywheel (BHP) : 120
Weight without Driver (KG) : 800
Power to Weight Ratio (BHP Per Ton) : 152.41
Being the 106 is lighter = Less Bhp gains to make it go faster.
antonyr123 1 year ago
How much it cost mate?
GoFuckYourself131 1 year ago
thats what my mums saxo sounds like but my mums bf put on a 200 quid racing exhaust on it and put newer cams in and carved all the head inside and replaced the oil with very expensive oil... having decent cams in does make a avery big different especially with amazing spark plugs ;)
kenthebass 2 years ago
did it make much of a differance with all these bits done to it, how did it fare to a vts?
swalesy100 2 years ago
hes got a small willy thats why he needs a loud exhaust
t4yjt 2 years ago
no its because he can afford one unlike you...
kenthebass 2 years ago 2
how much were the cams m8? and does they need a re map or would it just be beneficial
swicked123 3 years ago
its a vtr engine not a vts engine even with the cams the torque will still be lower in the range because of the 8v ; ) but needs a map
whitty2350 3 years ago
Duration camshaft?
Citroensaxo 3 years ago
it needs a remap and set up it just goes dead at 5500rpm that is all i am sure it will be amazing once it has been remaped.
chrisislost86 3 years ago
mate with a cam you should be able to rev this beast a bit higher than that. what you mean its not sure after 6k ...........HELLO> your cam comes on play at about 5500rpm.
ell1010 3 years ago
lmao no it doesnt.
Be out the power band after 6k anyway.
SteveVTSftw 2 years ago