since then I capture this video I have this model have more time remake ... This structure is stable also into the corners quick incursions... but unstable to catch any obstructions in the water. :(
floats / go even faster but it's also dangerous. Because of trapping some object in the water for swimming arm - then it goes immediately to the bottom: ( it is not waterproof .
@rocksparadox OK .. Hydrofoil is very difficuld to build. The faster it swims the more can sink when an object caught in the water. damage: ( Swimm is not safety.
@Micho6911 Of course I would try to get the density of the boat just right and get the right angle for the underwater planes at cruising speed but it is difficult indeed.
:)you know what I really think?:) now where I have angle / constant / order it immediately rose from the surface of the water:) At the expense of hydrodynamics:) Then the angle is not constant. :) If it is slightly bent spiral.
Occurred to me one thing. Yet I did not practice. Foil surface rippling the water at an angle to shoot a bit like a boomerang or a propeller, and thus to solve the area did not shoot at an angle, the entire model is actually rather emerges from the water and reduces the hydrodynamic resistance of the system:) at higher speeds:)But this is important only in some RC models, I think:) Do you think those that have already invented it in the Corporations Hydrofoils? :D
Design notes can Hydrofoils Indorporeited but this is my job and it swims! Hydrofoil from the company I have ever seen to swim. Do you? And this is the RC model! So what are you going?
what you say to Rc hydrofoil FOIL-S - the final form desing and new brushless motor ?? But since that time I Foil-S even better.Lower center of gravity and lower angle shafts. :)
The large engine cowl is determined for the engine powered whit classical aircraft propeller. Then hydrofoil moves as the snowmobile to skis. When snowfall I add new video.
Does it have to be shaped like that? Why can't it be like traditional (proven) hydrofoil design?
TheMrBlinx 2 days ago
@TheMrBlinx
since then I capture this video I have this model have more time remake ... This structure is stable also into the corners quick incursions... but unstable to catch any obstructions in the water. :(
Micho6911 2 days ago
@TheMrBlinx
changes of the reconstruction consist that I lowered center of gravity, and now there is a flexible shaft for better performance-more speed .
Micho6911 2 days ago
you might wanta use flexy hydrofoils that come back out of water, and more powerful motor.
lolziloveminecraft 5 days ago
@lolziloveminecraft
Yes , I can
:)
Micho6911 5 days ago
Nice model but the music is ridiculous.
DDotyVideo 6 days ago
efficient? lol you got to be kidding. The angle of the prop alone negates any efficiency you gained from the hydrofoil
Mattxjax45 3 weeks ago
@Mattxjax45
yes effecient. For a long time ago I redesigned the propeller angle :) /I us flex shaft/
Micho6911 3 weeks ago
@Micho6911 well sounds good :) Great build anyways
Mattxjax45 3 weeks ago
@Mattxjax45
ok, thank´ :)
Micho6911 3 weeks ago
@Mattxjax45
I will send you a photo that you believe? :) What's your email? I do not have video yet. when I drove the model just me who did not record video.
Micho6911 3 weeks ago
VIDEO SUCKS!!!!!!
shawnsanc01 1 month ago
@shawnsanc01
ok :)
Micho6911 1 month ago
Does it go faster??
Icecube5285 2 months ago
@Icecube5285
floats / go even faster but it's also dangerous. Because of trapping some object in the water for swimming arm - then it goes immediately to the bottom: ( it is not waterproof .
Micho6911 2 months ago
Cool but very boring!!!!!!!!!!!!!!!!!!!!!!!!
MrDbutcher 2 months ago
@MrDbutcher
Thank you :)
Micho6911 2 months ago
great job
womackke 3 months ago
@womackke
thank you :)
Micho6911 3 months ago
GREAT MUSIC CHOICE!!! MUSE IS DA BEST!
toxiczebra17 3 months ago
@toxiczebra17 yes !!! :)
Micho6911 3 months ago
@toxiczebra17 meh incubus is better
ibaho124 2 months ago
@toxiczebra17
thank you
Micho6911 2 months ago
@Micho6911 Hello amigo boatbuilder, that's some nice hardware.
It looks so streamlined, VERY well balanced and light.
Check out my boat, it's a 5 hull catamaran that's a bit slower but has a very short turn rate.
If I build a new one it will be a wavepiercing trimaran OR a hydrofoil !
rocksparadox 4 months ago
@rocksparadox OK .. Hydrofoil is very difficuld to build. The faster it swims the more can sink when an object caught in the water. damage: ( Swimm is not safety.
Micho6911 4 months ago
@Micho6911 Of course I would try to get the density of the boat just right and get the right angle for the underwater planes at cruising speed but it is difficult indeed.
rocksparadox 4 months ago
I do not know what it is
Micho6911 4 months ago
Do YOU know what a super-massive BH is?
Love the foil build.
art4med 4 months ago
thank you :)
Micho6911 4 months ago
Great..
ericgoujon 4 months ago
thank you
Micho6911 4 months ago
Wow an RC boat.
willibill1 4 months ago
:D
Micho6911 5 months ago
Love the music. :D
SwiftRzR 5 months ago
thats pretty gay lol
11SPOONZ 6 months ago
:)you know what I really think?:) now where I have angle / constant / order it immediately rose from the surface of the water:) At the expense of hydrodynamics:) Then the angle is not constant. :) If it is slightly bent spiral.
Micho6911 7 months ago
Occurred to me one thing. Yet I did not practice. Foil surface rippling the water at an angle to shoot a bit like a boomerang or a propeller, and thus to solve the area did not shoot at an angle, the entire model is actually rather emerges from the water and reduces the hydrodynamic resistance of the system:) at higher speeds:)But this is important only in some RC models, I think:) Do you think those that have already invented it in the Corporations Hydrofoils? :D
Micho6911 7 months ago
Me neither:)
Micho6911 7 months ago
@Micho6911
lol :)
iamironsack 7 months ago
Design notes can Hydrofoils Indorporeited but this is my job and it swims! Hydrofoil from the company I have ever seen to swim. Do you? And this is the RC model! So what are you going?
Micho6911 7 months ago
@Micho6911
I'm honestly not sure what that means...
iamironsack 7 months ago
what you say to Rc hydrofoil FOIL-S - the final form desing and new brushless motor ?? But since that time I Foil-S even better.Lower center of gravity and lower angle shafts. :)
Micho6911 7 months ago
And you say to my second bigger hydrofoil Sarah? Usually looks video Foil-S.
Micho6911 7 months ago
But hydrofoil on which no one has seen a swim. Do you?:)
Micho6911 7 months ago
Yes, in part
Micho6911 7 months ago
Saw pretty much this exact design principle from a company called Hydrofoils Incorporated.
iamironsack 7 months ago
nobody :)
Micho6911 8 months ago
anybody wanna go play baseball in a thunderstorm now? yeah me neither...<.<
X1AaronW 8 months ago
I've madesome changes that model swam faster - but the model is so tiny it can do only to a certain speed :)
Micho6911 10 months ago
haha, put a strong rc airplane motor on that instead, much faster :)
OptiXDream 10 months ago
me also :)
TeddyandRoyce 1 year ago
pretty good, me like
tolikamashina 1 year ago
Me also :)
Micho6911 1 year ago
@tolikamashina me also :)
Micho6911 1 year ago
The large engine cowl is determined for the engine powered whit classical aircraft propeller. Then hydrofoil moves as the snowmobile to skis. When snowfall I add new video.
Micho6911 1 year ago
I see the large engine cowl on the tail....did you try an airplane engine first?
catamaranman333 1 year ago
Good looking boat. Space age style hydrfoil.
kwokwing 1 year ago
And you have not seen my latest big one hydrofoil
Micho6911 1 year ago