20A ESC Motor Testing

[redeye874]

how much torque?

[harunlisiclisko]

when you run cd motor what you use

i use laptop charger an i can't run it ,help me please

you have 3 wires on cd motor on charger i have 2 wires

[30GB]

@harunlisiclisko a cd rom motor needs a controller to run it and a laptop charger has way too much power, you should find a 9v battery and play with that also you need to find a motor thats brushed, that only has 2 wires to hook up (red and black)

[harunlisiclisko]

@30GB

aaah thank you

[heberorozco]

it seems that you're an expert, i have a 15c 800mah 3cell lipo battery, a 30a ESC and a 13.5a 120w motor, do you think i will fry my battery? what battery do you reccomend (What burst rate?)

[30GB]

@heberorozco no it wont its just that the battery will die very fast because its only 800mah and make sure you dont go under the rated voltage of the lipo when dead

[heberorozco]

@30GB thank you man! and if i use same battery, same ESC and a 18a motor 240w, the battery will burn out right? cuz the max burst rate of thebattery is 16a for some sec

[heberorozco]

@30GB okay thank you man!

[30GB]

@martinyoung100 you need a brushless esc but find a esc that can use 12v and a servo tester

[maiznieksmaize]

52x goes up to 25000 rpm, is it true? can this 20A ESC control it properly and fast enough for those RPM's?

[30GB]

yes i used it on a small motor and it ran at very high rmps

[Aussie50]

Nice work on the motor!

you need reflector motor off a big laser copier :D they pull insane RPM's!

[30GB]

yea im going to find some printers and scrap the brushless motors

[diymania]

I have a bunch of those ranging from around 2krpm up to around 30krpm.

[438426x1]

lol if u rly want it to fly then put small flaps on the side and lower the voltage and up the current

[ikcti]

Better than I expected :)

[richthecardude94]

lol blow it up