Added: 2 years ago
From: oldnite650
Views: 97,839
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (124)

Sign In or Sign Up now to post a comment!
  • I know how to fix this problem inbox me and i will tell you it happend to me yesterday and i fixed it i know how to fix it.

  • @cheratpakistan well, can you tell us how did you fixed it? please.:)

  • Thanks dude

    

  • Thanks!! I had same problem so used redsn0w 0.9.6b5 & it worked as stated by ocameorn

  • Hey everyone just fixed no service I reset network settings first then delete ultrasnow an install again it worked for me hope it works for u too

  • I had the same problem. What I did to fix it was delete ultrasn0w and then reinstall it. But when my phone dies, or if I reboot my phone, I get the same problem again. So I have to delete ultrasn0w again, and then reinstall it..

    I'm firmware 4.2.1 on iphone 3g, and 06.15.00 baseband

  • @CookiesxRawrx What if you don't have ultrasn0w in the first place? will it do the same thing cause this is happening to my 3g

  • water..wateer...aguaaa

    hahahahaah

  • M facing the same problem . Any sol plse ...

  • my one not searching

  • yesterday i tried can but today i try to calll someone cannot leh

  • I CANNOT LEH

  • THX I owe you a beer

  • i have an iphone 3g on ios 4.1 and baseband 06.15.00 jailbroken with redsn0w 09.6b2, have ultrasn0w installed and tried several things such as: rebooting it, turn airplane mode on and of, etc.

    but i get no signal and cause of ultrasn0w it runs really slow.

    please help me!

  • @orgphilfrmtx Can you please tell me the modem firmware you have on your phone now?

    It should be 06.15.00

  • I'm looking for one without the jail break I didn't even jail break it and it says no service if I try to send a txt message it has a ? Mark to try again

  • love u bro ... it really worked , ultrasnow is really helpfull , thnx alot

  • how did you get it to work still having issues

  • Comment removed

  • @anelita03 my 3g just keeps saying searching if i remove and install the sim card i get one bar for a few seconds then searching again plz help

    

  • @anelita03 hi how did u fix it.am having the same problem i have fw 4.1.thanks m8.

  • @anelita03 help meeeee!

  • @anelita03

    how did you fix it mines is doing the same thing

  • @anelita03 how?

  • Comment removed

  • my phone's acting the same right now. do you still have this problem or did you find a solution?

  • i have problem,i buy my iphone 4 and i wont to unlock it on itunes but he was saying that my simcard was not correct (or somthing like that) so i jailbroken it but no i have now service... i think the problem is that my iphone 4 is never unlock it he is just jailbroken can enybody help me pleas?

  • hey bro in case you did not yet fix your "no service" problem, I got my own iPhone 3Gs getting back its service... Anybody who has "No Service" or "Unable to load network list" msg me or email me for my way of how i got my phone having its service again...

    email: ryanlumapas@yahoo.com

  • thx bro it did work , from the first time you Rule

  • to fix you have to go to cydia then reinstall repo666.ultrasn0w which will fix your problem as it sorts out your baseband

  • i just enabled ultra snow like you did and that put the sim card in without resetting the settings and now it works fine thanks

  • RESPECT !!!! BEEN TRYIN 4 OVER HOUR NO JOY WATCHED YOURS ( BANG) SORTED ....THANKS

  • it's already 2011 and i jailboke my iphone 3G for 4.2.1 on 6.15.00 baseband and sometimes i get full bars but only lasts for a minute or two and goes back to "searching..." i guess this has been happening for a while now...

  • i have the same problem, after i downloaded winterboard

  • tanx dude it worked

  • u got it fixed can u help me

  • which sim is 611 vodafone?

  • THANKS YOU SO MACH

  • did u ever get the prob fixed? if so would u mind telling me how to fix it ive been having the same problem

  • @simplyelyse2008 yes how is this fixed? im getting either the 1 bar signal or no service...

    06.15 baseband as well helpppp

  • @123georgeee If you still need help and all of those sitting with no signal no service problem , i found the correct way just let me know??

  • @iphonegen1 and yes its tricky but i can guide you step by step, the most problems is not jailbroken nor hardware nor software , its the baseband thats corrupt and that needs fixing :)

  • @iphonegen1 heeelp me

  • after jailbreaking, install ultrasn0w, insert sim card, then reboot...that seems to work

  • @CTAULAKI  no that doesnt fucking work cunt flaps

  • my phone is jailbroke but no service.. tethered and phone is up again still no service.

    when I go to cydia to unlock it goes to white apple screen..very frustrating. I have been trying to fix for hours ....

  • first going to cydia and unstalling ultrasn0w, Second i had to rejailbreak the iphone, you need to download redsn0w version 0.9.6b5 (im using a mac, dont know about pc sorry) follow the instruction its a MUST you click install cydia & install ipad baseband, people forgot to check this and sometimes lead to the no servive problem, let it jailbreak be patient, once done, use ultrasn0w, hopefully that would work

  • @ocameorn Thanks so much, for anyone who has no service listen to this guy, GET REDSN0W VERSION 0.9.6b5!!!

    any earlyer version will not give you and option to get ipad baseband, i had ultrasnow and everything but the only thing that worked was this, thanks again!!

  • @ocameorn thx man!!!! this works

  • @ocameorn it works, thanks

  • @ocameorn thanks, it really works!

  • i have the same problem iphone 3gs 4.2.1 baseband 06.15.00 t-mobile sim ive been looking for the fix but i think the antenna is broken

  • @kilme39 Just type this video YouTub. how to fix No Service on iphone 3g tested 100%%

  • uninstall ultrasnow from cydia...this will help.

  • uninstall ultrasnow from cydia...this will help.

  • HI GUYS

    can someone help me plz i am deployed and i need to make this dam iphone work !!

    my problem:

    Iphone 3g, jail broken with latest redsnow, unlocked with ultra snow, my iphone firmware is 05.15.04. I have done everything like the airplane mode trick, and reset network settingand also got the S.A.M app. my phone keeps saying waiting to be activated and then after dismissing it it says searching and then no service. plz help me i want to call home , god bless

  • Please help . Totally appreciated

    Phone 3g

    Firm ware 4.1 base band 06.15.00

    trying to work with T-mobile

    I used Redsnow 0.9.6b5 and restore my phone to 4.1 and 06.15 baseband.. My phone will picks up full reception but after couple minutes/seconds, it will drop all the bars and go into either " No Reception" or "Searching".

    I tried " resetting Network"... taking Sim card in and out... Airplane mode.... I turned of the 3g. everything i read online ..

    Please help...very frustrated

  • @charlie23190 I got the same problem as u man

  • ok...i just spent 2 hours fucking with this.

    Phone: 3g

    iOS: Sinful custom iOS 4.1 (activated), so it said, but i installed the sinful ultrasn0w and got no service. i uninstalled that, and went to the repo666 package and install its ultrasn0w and voila! i have service on 4.1 on ipad baseband! hope this helps others...i was about to smash this fucking phone!

  • look it did the same to me, i am now using it fine.

    - make sure you use the latest version of redsn0w. get thefirmwire that fits your CURRENT ware on your phone, and also download the firmware to get the 6.15.00 bandwidth...

    run redsn0w and click change bandwitdh to ipad. let it jailbreak, then run ultrasn0w. let it reboot, go into cydia again and run ultrasn0w again. let it run and do NOT reboot it this time. that's how i got service on mine.

  • ok m8 give me a call if u in the uk i can hellp i have the right eqwitment to sort it out 4 u 07543315878

  • U need to check ur modem firmware ultrasnow only works with a few modem firmwares go to settings general and see ur baseband I fixed my Iphone by changing to a ipad modem firmware which is 06.15.0 u can do this with the new redsn0w jailbreak u just click the option use ipad baseband then install ultrasn0w and ur good to go hope this helps

  • same problem here buddy

  • I fixed mine by uninstalling UltraSn0w. It works fine now.

  • thank u its working :)

  • that was pointless

  • YOU MORON

    YOU HAVE TO INSTALL ULTRASNOW AND IT WILL BE CHECKED,HOW DO YOU EXPECT IT TO WORK WITHOUT INSTALLING IT!!!!

    REWIND YOUR VIDEO AND SEE

  • i have same problem

  • i have an iphone4 and jailbrock it and then unlocked it with ultrasn0w bad choice lol but my no service problem is fixed here is how i did it i removed ultrasn0w then removed my sim and on wifi i downloaded fuzzyband tun off put in sim turn on go into setimgs find your provider and your good been working for me ever since peace hope it helps.

  • Uninstall repo666 that's what I did an it worked

  • i have 3.1.3 and i have the same prob...i thought this shit only happened with 4.1

  • what if we have the "NO SERVICE" on the our phone.

    cause i delete something on cydia and now it has no service and its not supported on itunes.

    is it now locked and do i need to unlocked again???

  • I hate ultrasn0w!!!

  • i have iPhone 4.1 and it not working, what can i do?

  • dude same prob... i even dial 611 lol but anyway what did u do to fix it??

  • Dude i fucking lovee youuu! no homo . thanx bro

  • your video sucks

  • My iPhone 3g suddenly stopped working as a phone. It is not reading my sim card anymore and just gives me signal bars. And sometimes just says "no service" or "no sim installed" If anyone can help me, please contact me for a fix. It is running version 3.1 and was unlocked with BlackRa1n. THANKS!

  • @usedtobealawyer Have you figured out what the problem was??? It has just happend to me too. I even restored everything back to zero and redid the jailbreak, but still to no avail. If you're able to find something out, pls let me know

  • @DaManRigel yeah i got it fixed. all I did was jailbroke it with ultrasn0w instead of blackra1n. So my suggestion would be to just rejailbreak with a different software.

    let me know how this works out!

  • ur suposed to tap on the ultrasnow unlock and install it

  • thanx bro u save my life i finally get the signal fix thanx.nice vid

  • Hey, i just figured out the problem, you first put your sim card, then go to Settings > Airplane mode (ON) And Then Put It Back Off, It Will Still Say No Service , Then You Go To Settings > Carrier , it will automaticly search, if it says it doesnt find a netwok, press settings and do the same method :) , hope i helped !

  • did you figure it out yet? becuz i have the same problem..

  • Heyy Al of Youu... See Ma Videoss.... Solution Avalable Here

  • Same exact problem

    :(

  • have you come up with a solution yet? i have the same problem

  • i dont know if this might work for some people but i turned my airplane mode off then back on.. my t-mobile signal came back.

  • bro i have the same exact problem like 100% the same idk wat to do have you came up with a solution?

  • Following steps will hopefully get your iphone working. I have iphone 3G 3.1.2 firmware.

    First, make sure you have the 3G & Data roaming OFF. Secondly, Install "sn0w" from blackra1n and finally, reboot the iphone. This should work. It did for me!!

  • i have the same problem EXCEPT i have an AT&T 3g sim and i get the no service displayed! help!

    6.02

    5.11.07

    firmware 3.0

  • remove ultrasn0w than reboot your iphone.take out SIM.put it back.than open ur iphone it will need to recover but you are going to download blackra1n and jailbeak ur iphone so u will done.

    enjoy....

  • uninstall ultrasnow it will help

  • try to uninstall ultrasnow. restart yr phone and yr signal will be back

  • u can try to uninstall ultrasnow from sources than on and off your phone again than you signal will be back. I try and it work for me

  • I had this same problem but with Redsn0w. It fixed itself after upgrading to ultrasn0w in Cydia. The only thing I can think that may be different for you, compared to me, is that I downloaded a different Profile for my Service provider from:

    help benm at/ tethering php

    (replace dots)

    Select country, service provider install profile and let us know how you get on. As I say, I've got signal now.

  • Take out your sim card & Re jailbreak. That should fix whatever is the problem. if you have any further problems just pm me and i'll see if I can help.

  • I have the same problem, but if there is a lot of signal in my iphone see only one line and let me make calls. What can I do?

  • Do you have T-Mobile? if so, T-Mobile was down yesterday and everybody was having shitty service. There is nothing i did with this phone i had to buy a new iphone and jailbreak again. Hope that helps. other then that, you gonna have to wait for the Dev team to come up with a solution for ur prob. thanks.

  • i got the same problem. But for me it does the no service every other boot of the phone. Sometimes it just shows _ _ _ _ and stays like that. Sometimes it says no service.

    But its every other boot as far as i can tell.

  • try to turn the airplane mode on and off, and reinsert your sim-card :) (no need to wait)

  • For what I've seen you did everything the right way but you could have more recent bootloader or baseband. If haven't done any recent updates from Itunes you could fix the problem by dwning fuzzyband from Cydia and downgrading you baseband as long as you have bootloader < 4.** other wise we are on the same boat you'll have to wait for dev-team for new updates

  • hey i updated my phone to the newest 3.1.2 accidentally so i downgraded back to 3.0 so it could be unlocked...so then i succesfully unlocked and jailbroke my iphone but always get NO SERVICE no matter what... so do you think im stuck and have to wait ffor dev team? or is there a way it can be fixed? thankyou

  • Download Fuzzyband from Cydia, that will let you know the version of your Baseband and Bootloader, like I wrote before if the version of your boot loader is anything lower than 4.xx then you can downgrade your base band and be able to user your phone with any provider

  • Daniel am in the same as others having No service on Iphone 3g 8gb firmware 5.11 and version 3.1.2 after upgrading from 3.0/ can you help me in getting my signals back please

  • The answer is SEX

  • Tried that but it didnt really work.

  • get in and out of airplane mode. good luck.

  • @PimpdaddyO22O lmfao ur fucking funny

  • @PimpdaddyO22O werd ! 

  • @PimpdaddyO22O no it your mom

  • Nice!! 5/5

  • same problem

  • Just wait till dev team comes up with a solution

  • you have same problemo?

  • what firmware are you on ??

  • i did redsn0w 0.7 on windows with

    ultrasn0w latest version. I tried it with my bosses sim card hes on AT&T 3g and it worked like a charm. when i try my Tmobile sim, its trash it has no service. any ideas? its currently on 3.0.0

  • i Think that i cant unlock the iphone. I found out that it has boot loader version 5.09 and i heard that if an iphone has that version of the bootloader, it is unlockable. I will end up selling the iphone to an AT&T User

  • ur an animal i cant call you now

  • did you activate it over tunes ,you must be connected to internet in order to do so

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more