Why do people insist on whistling into a radio? Whistling gives a false reading! The word AUDIO gives you the best (true) reading.So unless you talk in whistles then audio would be your best thing to say! Nice room!
i want a cb radio for in my room and for when i go on my bike, and can a $50 cb radio reach my friends house. he lives 14 blocks away all he has is a walkie talkie so could we talk back and forth ?????????
you fucking ham people u know any one can talk 1000 miles on a ham radio doing it on a short wave with a 2 watt deadkey is way more fun and more of a challenge whats up ham operator you dont like a challenge
@MnTrucker1984.. Listen shit for brains I was just refering to the lack of formality thats apparent on 11 meters I thought it was a good thing unlike on the ham bands where youre suppose to listen then if nothing heard ask if the freq is in use and all that shit. so fuck off
Well than say that. To me. And to others that read that comment you sounded like a typical, know-it-all, sarcastic, mouthy piece of shit like the best part of you ran down the crack of your mommas ass...
GeorgiaWineMaker, Who made that radio for you. I saw a similar faceplate on ebay from a tech but lost the link. I wanted him to build a Cobra 148 for me. Great looking 959.
Thanks. Yeah I know, I'm really behind on projects and one is to clean up the clutter so I can work on stuff again....Sometimes I won't if I have ADHD or something, because I'll start something and then start something else before cleaning up and before I know it, it's overwheelming. I'll get things cleaned up soon and make some new videos.
My antenna light keeps coming on when I key the mic. K30 mag mount on top of P/U truck. Ive raised & lowered antenna but antenna red light still comes on.What can I do & will it hurt my radio? Thanks, Boogy Man
It's had lots of mods but I can't remember them all. An astatic echo board was added and the knobs and switches are different from factory and the face plate was labeled to match the new knobs and switches.
I saw this radio on another site a few days ago where you were talking about the faceplate you made. What did you make that out of? Did it already have a sticky back on it? Nice job.
I bought the radio off the internet about a year ago. Yes, a lot of the knobs are different from the factory uses. It has high and low channels and has an astatic echo board added to it too. It also has variable power, but I can't remember if it had that stock or not. I did not make the face plate, I think the guy I got it from made the face plate. Everyone complains about how loud I am so I guess it's pretty loud. I still haven't got someone to use it while I go out and listen on the other end.
Hey man, hahahaa! Is that the 20 A L.D.O. 20R power supply that I fixed for you a while back? I think it was around 99 or 2000. I put new diodes or new transistors in it, or something like that.
I like that big Linear!
BananaJSSI 2 months ago
Why do people insist on whistling into a radio? Whistling gives a false reading! The word AUDIO gives you the best (true) reading.So unless you talk in whistles then audio would be your best thing to say! Nice room!
KC8YOQ 4 months ago
break channel can I get a glass of wine?
soundhound2008 8 months ago
what a fucking mess...
nextelbklyn 11 months ago
What trailer park did you escape from?
dorslv 1 year ago
t6hat one bad 4video bud
29pu04 1 year ago
i want a cb radio for in my room and for when i go on my bike, and can a $50 cb radio reach my friends house. he lives 14 blocks away all he has is a walkie talkie so could we talk back and forth ?????????
fishingboy11 1 year ago
What kind of antenna are you running with this setup?
52hogan 1 year ago
@52hogan Imax 2000
GeorgiaWineMaker 5 months ago
Good looking trashy set up there.
KE5WDP 1 year ago
so funny reading comments
pspbarry 1 year ago
This has been flagged as spam show
you fucking ham people u know any one can talk 1000 miles on a ham radio doing it on a short wave with a 2 watt deadkey is way more fun and more of a challenge whats up ham operator you dont like a challenge
livewiremale69 2 years ago
Don't you just love HF DX? hehehe...
wesmckay 2 years ago
Love the way these 11 m guys just key up any where any time now thats freedom for ya
rufousme 2 years ago
wow.. I didnt know 11 meters was owned by anyone, or a channel was owned by anyone. Jackass.
MnTrucker1984 2 years ago
@MnTrucker1984.. Listen shit for brains I was just refering to the lack of formality thats apparent on 11 meters I thought it was a good thing unlike on the ham bands where youre suppose to listen then if nothing heard ask if the freq is in use and all that shit. so fuck off
rufousme 2 years ago
Well than say that. To me. And to others that read that comment you sounded like a typical, know-it-all, sarcastic, mouthy piece of shit like the best part of you ran down the crack of your mommas ass...
MnTrucker1984 2 years ago
Lol! That´s fit :o)
johntex5 2 years ago
How many watts is that maverick putting out?
BurningTirez 2 years ago
Nice Video! Well done!
CBRadioChatdotcom 2 years ago
is it necesary to have all of those boxes
crazytacostudios 3 years ago
you want to sell me that cobra 2000 speaker you got laying there
LAZYDOG505 3 years ago
That's how a Galaxy Should be. Nice and powerful! Great Job!
Regency500 3 years ago
that is a nice big box
control2950 3 years ago
GeorgiaWineMaker,
Which switch or knob controls the echo board?
cbshack 3 years ago
Bottom row, third knob over, Interknob controls echo and outter ring controls Reverb.
GeorgiaWineMaker 3 years ago
wat in the h is you talking about lol
20010Diva 1 year ago
I saw someone asked about the insides....
Upgraded Power regulator stock to a 100 Watt regulator, allows the radio to power all of the mods
Upgraded the AF amp to improve AM modulation
Modded the RF ,PROPER tuning (No Crappy Swing Kit EVER in my radios)
Channeled the radio
Echo Added on the front
Talkback modded
Clarifier unlocked
Adj. RF Power modded to swing from any setting
The faceplates I make are custom made for each radio I do, I hope you are enjoying it!!!! REDEYE
csk0425 3 years ago
WOW!!! Someone told me one of my radios was on youtube! I remember making that one!
REDEYE (N4JJ1)
csk0425 3 years ago
GeorgiaWineMaker, Who made that radio for you. I saw a similar faceplate on ebay from a tech but lost the link. I wanted him to build a Cobra 148 for me. Great looking 959.
cbshack 3 years ago
you have alot of equipment
infamous500 3 years ago
I have a lot of mess...LOL It's not as much as it looks, it's just very unorganized LOL
GeorgiaWineMaker 3 years ago
bırakın olm şu cb işlerini sesi bile dolgun çıkmıyor amatör telsizler daha kulağa hoş dinliyor...
futfut99 3 years ago
Nice Galaxy!!! It's a little messy though... lol Maybe you should put it all on one stand like we had ours.
twackerakafishbait 3 years ago
Thanks. Yeah I know, I'm really behind on projects and one is to clean up the clutter so I can work on stuff again....Sometimes I won't if I have ADHD or something, because I'll start something and then start something else before cleaning up and before I know it, it's overwheelming. I'll get things cleaned up soon and make some new videos.
GeorgiaWineMaker 3 years ago
Haha, same here! You should see the inside of my truck!!!
twackerakafishbait 3 years ago
No, you should see the inside of MY truck....LOL
GeorgiaWineMaker 3 years ago
Do I want to? lol
I cleaned mine out this morning, it looks, better... lol (not as scary)
twackerakafishbait 3 years ago
This has been flagged as spam show
My antenna light keeps coming on when I key the mic. K30 mag mount on top of P/U truck. Ive raised & lowered antenna but antenna red light still comes on.What can I do & will it hurt my radio? Thanks, Boogy Man
HerbWalker 3 years ago
great to see another radio operator out there. i'm up in N.E. kansas, I posted a video responce take a look
ecoots 3 years ago
How do I get to the video responce? I don't see it.
GeorgiaWineMaker 3 years ago
what all mods have you done to the tadio? I see some of the knobs are different than my 959.
tezterz 3 years ago
It's had lots of mods but I can't remember them all. An astatic echo board was added and the knobs and switches are different from factory and the face plate was labeled to match the new knobs and switches.
GeorgiaWineMaker 3 years ago
I saw this radio on another site a few days ago where you were talking about the faceplate you made. What did you make that out of? Did it already have a sticky back on it? Nice job.
tezterz 3 years ago
I bought the radio off the internet about a year ago. Yes, a lot of the knobs are different from the factory uses. It has high and low channels and has an astatic echo board added to it too. It also has variable power, but I can't remember if it had that stock or not. I did not make the face plate, I think the guy I got it from made the face plate. Everyone complains about how loud I am so I guess it's pretty loud. I still haven't got someone to use it while I go out and listen on the other end.
GeorgiaWineMaker 3 years ago
Hey man, hahahaa! Is that the 20 A L.D.O. 20R power supply that I fixed for you a while back? I think it was around 99 or 2000. I put new diodes or new transistors in it, or something like that.
Tonyssongs 3 years ago
Yeap, That's the one, still going strong.
GeorgiaWineMaker 3 years ago